diff options
Diffstat (limited to 'nuttx/configs/lpc4330-xplorer')
| -rw-r--r-- | nuttx/configs/lpc4330-xplorer/README.txt | 25 | ||||
| -rw-r--r-- | nuttx/configs/lpc4330-xplorer/ostest/defconfig | 64 |
2 files changed, 45 insertions, 44 deletions
diff --git a/nuttx/configs/lpc4330-xplorer/README.txt b/nuttx/configs/lpc4330-xplorer/README.txt index abb2a82381..26b4b1918e 100644 --- a/nuttx/configs/lpc4330-xplorer/README.txt +++ b/nuttx/configs/lpc4330-xplorer/README.txt @@ -1,7 +1,8 @@ README ^^^^^^ -README for NuttX port to the NGX LPC4330-Xplorer board +README for NuttX port to the LPC4330-Xplorer board from NGX Technologies +featuring the NXP LPC4330FET100 MCU Contents ^^^^^^^^ @@ -275,10 +276,10 @@ LPC4330-Xplorer Configuration Options CONFIG_LPC43_USBHOST=n CONFIG_LPC43_USBOTG=n CONFIG_LPC43_USBDEV=n - CONFIG_LPC43_UART0=y + CONFIG_LPC43_USART0=y CONFIG_LPC43_UART1=n - CONFIG_LPC43_UART2=n - CONFIG_LPC43_UART3=n + CONFIG_LPC43_USART2=n + CONFIG_LPC43_USART3=n CONFIG_LPC43_CAN1=n CONFIG_LPC43_CAN2=n CONFIG_LPC43_SPI=n @@ -304,16 +305,16 @@ LPC4330-Xplorer Configuration Options LPC43xx specific device driver settings - CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the - console and ttys0 (default is the UART0). - CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the UARTn for the + console and ttys0 (default is the USART0). + CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. This specific the size of the receive buffer - CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before being sent. This specific the size of the transmit buffer - CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be - CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. - CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity - CONFIG_UARTn_2STOP - Two stop bits + CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_U[S]ARTn_2STOP - Two stop bits LPC43xx specific CAN device driver settings. These settings all require CONFIG_CAN: diff --git a/nuttx/configs/lpc4330-xplorer/ostest/defconfig b/nuttx/configs/lpc4330-xplorer/ostest/defconfig index ea5e141a9a..8653cd5b32 100644 --- a/nuttx/configs/lpc4330-xplorer/ostest/defconfig +++ b/nuttx/configs/lpc4330-xplorer/ostest/defconfig @@ -73,7 +73,7 @@ CONFIG_ARCH=arm CONFIG_ARCH_ARM=y CONFIG_ARCH_CORTEXM4=y CONFIG_ARCH_CHIP=lpc43xx -CONFIG_ARCH_CHIP_LPC4320=y +CONFIG_ARCH_CHIP_LPC4330FET100=y CONFIG_ARCH_BOARD=lpc4330-xplorer CONFIG_ARCH_BOARD_LPC4330_XPLORER=y CONFIG_BOARD_LOOPSPERMSEC=7982 @@ -106,10 +106,10 @@ CONFIG_LPC43_ETHERNET=n CONFIG_LPC43_USBHOST=n CONFIG_LPC43_USBOTG=n CONFIG_LPC43_USBDEV=n -CONFIG_LPC43_UART0=y +CONFIG_LPC43_USART0=y CONFIG_LPC43_UART1=n -CONFIG_LPC43_UART2=n -CONFIG_LPC43_UART3=n +CONFIG_LPC43_USART2=n +CONFIG_LPC43_USART3=n CONFIG_LPC43_CAN1=n CONFIG_LPC43_CAN2=n CONFIG_LPC43_SPI=n @@ -135,51 +135,51 @@ CONFIG_LPC43_GPDMA=n # # LPC43xx specific serial device driver settings # -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the +# CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the UARTn for the # console and ttys0 (default is the UART1). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. +# CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. # This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before +# CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before # being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UARTn_2STOP - Two stop bits +# CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_U[S]ARTn_2STOP - Two stop bits # -CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_USART0_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n +CONFIG_USART2_SERIAL_CONSOLE=n +CONFIG_USART3_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 +CONFIG_USART0_TXBUFSIZE=256 CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 +CONFIG_USART2_TXBUFSIZE=256 +CONFIG_USART3_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 +CONFIG_USART0_RXBUFSIZE=256 CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 +CONFIG_USART2_RXBUFSIZE=256 +CONFIG_USART3_RXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 +CONFIG_USART0_BAUD=115200 CONFIG_UART1_BAUD=115200 +CONFIG_USART2_BAUD=115200 +CONFIG_USART3_BAUD=115200 -CONFIG_UART0_BITS=8 +CONFIG_USART0_BITS=8 CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 +CONFIG_USART2_BITS=8 +CONFIG_USART3_BITS=8 -CONFIG_UART0_PARITY=0 +CONFIG_USART0_PARITY=0 CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 +CONFIG_USART2_PARITY=0 +CONFIG_USART3_PARITY=0 -CONFIG_UART0_2STOP=0 +CONFIG_USART0_2STOP=0 CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 +CONFIG_USART2_2STOP=0 +CONFIG_USART3_2STOP=0 # # LPC43xx specific PHY/Ethernet device driver settings |