diff options
Diffstat (limited to 'nuttx/configs/lpc4330-xplorer/README.txt')
| -rw-r--r-- | nuttx/configs/lpc4330-xplorer/README.txt | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/nuttx/configs/lpc4330-xplorer/README.txt b/nuttx/configs/lpc4330-xplorer/README.txt index abb2a82381..26b4b1918e 100644 --- a/nuttx/configs/lpc4330-xplorer/README.txt +++ b/nuttx/configs/lpc4330-xplorer/README.txt @@ -1,7 +1,8 @@ README ^^^^^^ -README for NuttX port to the NGX LPC4330-Xplorer board +README for NuttX port to the LPC4330-Xplorer board from NGX Technologies +featuring the NXP LPC4330FET100 MCU Contents ^^^^^^^^ @@ -275,10 +276,10 @@ LPC4330-Xplorer Configuration Options CONFIG_LPC43_USBHOST=n CONFIG_LPC43_USBOTG=n CONFIG_LPC43_USBDEV=n - CONFIG_LPC43_UART0=y + CONFIG_LPC43_USART0=y CONFIG_LPC43_UART1=n - CONFIG_LPC43_UART2=n - CONFIG_LPC43_UART3=n + CONFIG_LPC43_USART2=n + CONFIG_LPC43_USART3=n CONFIG_LPC43_CAN1=n CONFIG_LPC43_CAN2=n CONFIG_LPC43_SPI=n @@ -304,16 +305,16 @@ LPC4330-Xplorer Configuration Options LPC43xx specific device driver settings - CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the - console and ttys0 (default is the UART0). - CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. + CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the UARTn for the + console and ttys0 (default is the USART0). + CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. This specific the size of the receive buffer - CONFIG_UARTn_TXBUFSIZE - Characters are buffered before + CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before being sent. This specific the size of the transmit buffer - CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be - CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. - CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity - CONFIG_UARTn_2STOP - Two stop bits + CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_U[S]ARTn_2STOP - Two stop bits LPC43xx specific CAN device driver settings. These settings all require CONFIG_CAN: |