initial check-in of ASF 3.39.0

1 files changed, 146 insertions, 0 deletions

diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..6287c00a
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
@@ -0,0 +1,146 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samb11zr
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at30tse75x_example_flash.elf
+TARGET_SRAM = at30tse75x_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/eeprom/at30tse75x/at30tse75x.c \
+       common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c \
+       sam0/boards/samb11zr_xplained_pro/board_init.c     \
+       sam0/drivers/gpio/gpio.c                           \
+       sam0/drivers/i2c/i2c_master.c                      \
+       sam0/drivers/i2c/i2c_master_interrupt.c            \
+       sam0/drivers/system/system_sam_b.c                 \
+       sam0/utils/cmsis/samb11/source/gcc/startup_samb11.c \
+       sam0/utils/cmsis/samb11/source/system_samb11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/eeprom/at30tse75x        \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samb11zr_xplained_pro                  \
+       sam0/drivers/gpio                                  \
+       sam0/drivers/i2c                                   \
+       sam0/drivers/system                                \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samb11/include                    \
+       sam0/utils/cmsis/samb11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = 
+DEBUG_SCRIPT_SRAM  = sam0/boards/samb11zr_xplained_pro/debug_scripts/gcc/samb11zr_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMB11ZR_XPLAINED_PRO                     \
+       -D I2C_MASTER_CALLBACK_MODE=true                   \
+       -D __SAMB11ZR__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file