initial check-in of ASF 3.39.0

3 files changed, 280 insertions, 0 deletions

diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile
new file mode 100644
index 00000000..95739974
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/Makefile
@@ -0,0 +1,52 @@
+# List of available make goals:
+#
+# all                     Default target, builds the project
+# clean                   Clean up the project
+# rebuild                 Rebuild the project
+#
+#
+# doc                     Build the documentation
+# cleandoc                Clean up the documentation
+# rebuilddoc              Rebuild the documentation
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Include the common Makefile, which will also include the project specific
+# config.mk file.
+MAKEFILE_PATH = ../../../../../../../../sam0/utils/make/Makefile.sam.in
+include $(MAKEFILE_PATH)
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h
new file mode 100644
index 00000000..a1bc07b8
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/asf.h
@@ -0,0 +1,82 @@
+/**
+ * \file
+ *
+ * \brief Autogenerated API include file for the Atmel Software Framework (ASF)
+ *
+ * Copyright (c) 2012 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ASF_H
+#define ASF_H
+
+/*
+ * This file includes all API header files for the selected drivers from ASF.
+ * Note: There might be duplicate includes required by more than one driver.
+ *
+ * The file is automatically generated and will be re-written when
+ * running the ASF driver selector tool. Any changes will be discarded.
+ */
+

+// From module: Common SAM0 compiler driver

+#include <compiler.h>

+#include <status_codes.h>

+

+// From module: EEPROM AT30TSE75X

+#include <at30tse75x.h>

+

+// From module: GPIO - GPIO Pin Control for SAMB (Callback APIs)

+#include <gpio.h>

+

+// From module: Generic board support

+#include <board.h>

+

+// From module: I2C - Inter-Integrated Circuit for SAMB

+#include <i2c_common.h>

+#include <i2c_master.h>

+#include <i2c_master_interrupt.h>

+

+// From module: Interrupt management - SAM implementation

+#include <interrupt.h>

+

+// From module: Part identification macros

+#include <parts.h>

+

+// From module: SYSTEM - Core System Driver for SAMB

+#include <system_sam_b.h>

+
+#endif // ASF_H
diff --git a/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
new file mode 100644
index 00000000..6287c00a
--- /dev/null
+++ b/common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc/config.mk
@@ -0,0 +1,146 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+#    Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m0
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = samb11zr
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = at30tse75x_example_flash.elf
+TARGET_SRAM = at30tse75x_example_sram.elf
+
+# List of C source files.
+CSRCS = \
+       common/utils/interrupt/interrupt_sam_nvic.c        \
+       common2/components/memory/eeprom/at30tse75x/at30tse75x.c \
+       common2/components/memory/eeprom/at30tse75x/example/at30tes_example.c \
+       sam0/boards/samb11zr_xplained_pro/board_init.c     \
+       sam0/drivers/gpio/gpio.c                           \
+       sam0/drivers/i2c/i2c_master.c                      \
+       sam0/drivers/i2c/i2c_master_interrupt.c            \
+       sam0/drivers/system/system_sam_b.c                 \
+       sam0/utils/cmsis/samb11/source/gcc/startup_samb11.c \
+       sam0/utils/cmsis/samb11/source/system_samb11.c     \
+       sam0/utils/syscalls/gcc/syscalls.c
+
+# List of assembler source files.
+ASSRCS = 
+
+# List of include paths.
+INC_PATH = \
+       common/boards                                      \
+       common/utils                                       \
+       common2/components/memory/eeprom/at30tse75x        \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro \
+       sam0/boards                                        \
+       sam0/boards/samb11zr_xplained_pro                  \
+       sam0/drivers/gpio                                  \
+       sam0/drivers/i2c                                   \
+       sam0/drivers/system                                \
+       sam0/utils                                         \
+       sam0/utils/cmsis/samb11/include                    \
+       sam0/utils/cmsis/samb11/source                     \
+       sam0/utils/header_files                            \
+       sam0/utils/preprocessor                            \
+       thirdparty/CMSIS/Include                           \
+       thirdparty/CMSIS/Lib/GCC \
+       common2/components/memory/eeprom/at30tse75x/example/samb11zr_xplained_pro/gcc
+
+# Additional search paths for libraries.
+LIB_PATH =  \
+       thirdparty/CMSIS/Lib/GCC                          
+
+# List of libraries to use during linking.
+LIBS =  \
+       arm_cortexM0l_math                                
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+LINKER_SCRIPT_SRAM  = sam0/utils/linker_scripts/samb11/gcc/samb11g18a_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = 
+DEBUG_SCRIPT_SRAM  = sam0/boards/samb11zr_xplained_pro/debug_scripts/gcc/samb11zr_xplained_pro_sram.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE        = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS = 
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS = 
+
+# Extra flags to use when assembling.
+ASFLAGS = 
+
+# Extra flags to use when compiling.
+CFLAGS = 
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+#   To add a definition use the format "-D name[=definition]".
+#   To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+#   BOARD      Target board in use, see boards/board.h for a list.
+#   EXT_BOARD  Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+       -D ARM_MATH_CM0PLUS=true                           \
+       -D BOARD=SAMB11ZR_XPLAINED_PRO                     \
+       -D I2C_MASTER_CALLBACK_MODE=true                   \
+       -D __SAMB11ZR__
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD = 
+POSTBUILD_CMD = 
\ No newline at end of file