Add pashello example

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@619 7fd9a85b-ad96-42d3-883c-3090e2eb8679

6 files changed, 891 insertions, 0 deletions

diff --git a/nuttx/configs/z16f2800100zcog/pashello/Make.defs b/nuttx/configs/z16f2800100zcog/pashello/Make.defs
new file mode 100755
index 0000000000..811809c805
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/Make.defs
@@ -0,0 +1,160 @@
+############################################################################
+# configs/z16f2800100zcog/pashello/Make.defs
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# These are the directories where the ZNeo-II toolchain is installed
+
+ZDSINSTALLDIR		:= C:/Program\ Files/ZiLOG/ZDSII_ZNEO_4.11.0
+ZDSBINDIR		:= $(ZDSINSTALLDIR)/bin
+ZDSSTDINCDIR		:= $(ZDSINSTALLDIR)/include/std
+ZDSZILOGINCDIR		:= $(ZDSINSTALLDIR)/include/zilog
+
+# These are the same directories but with the directory separator
+# character swapped as needed by the ZNeo-II compiler
+
+WTOPDIR 		:= ${shell cygpath -w $(TOPDIR)}
+WZDSSTDINCDIR		:= ${shell cygpath -w $(ZDSSTDINCDIR)}
+WZDSZILOGINCDIR 	:= ${shell cygpath -w $(ZDSZILOGINCDIR)}
+
+# Escaped versions
+
+ETOPDIR 		:= ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
+EZDSSTDINCDIR		:= ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
+EZDSZILOGINCDIR 	:= ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
+
+# Assembler definitions
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHASMOPTIMIZATION	= -debug
+else
+  ARCHASMOPTIMIZATION	= -nodebug
+endif
+
+ARCHASMCPUFLAGS 	= -cpu:Z16F2811AL -NOigcase
+ARCHASMLIST		= -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
+ARCHASMWARNINGS 	= -warn
+ARCHASMDEFINES		= -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 \ 				  -define:__ASSEMBLY__
+ARCHASMINCLUDES 	= -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
+AFLAGS			= $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \
+			  $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
+
+# Compiler definitions
+
+ifeq ("${CONFIG_DEBUG}","y")
+  ARCHOPTIMIZATION	= -debug -NOregvar -reduceopt
+else
+  ARCHOPTIMIZATION	= -nodebug -regvar
+endif
+
+ARCHCPUFLAGS		= -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL -NOgenprint \
+			  -asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
+ARCHLIST		= -keeplst -NOlist -NOlistinc -NOkeepasm
+ARCHPICFLAGS		=
+ARCHWARNINGS		= -warn
+ARCHDEFINES		= -define:_Z16F2811AL -define:_Z16K_SERIES \
+			  -define:_Z16F_SERIES
+ARCHSTDINCLUDES 	= -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+ARCHUSRINCLUDES 	= -usrinc:'.'
+ARCHINCLUDES		= $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
+CFLAGS			= $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) \
+			  $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES)
+
+CPPDEFINES              = -D_Z16F2811AL -D_Z16K_SERIES -D_Z16F_SERIES -D__ASSEMBLY__
+CPPINCLUDES             = -I$(TOPDIR)/include
+CPPFLAGS                = $(CPPDEFINES) $(CPPINCLUDES)
+
+# Librarian definitions
+
+ARFLAGS 		= -quiet -warn
+
+# Linker definitions
+
+LINKCMDTEMPLATE 	= $(TOPDIR)/configs/z16f2800100zcog/pashello/pashello.linkcmd
+
+# Tool names/pathes
+
+CROSSDEV		=
+CC			= $(ZDSBINDIR)/zneocc.exe
+CPP			= gcc -E
+LD			= $(ZDSBINDIR)/zneolink.exe
+AS			= $(ZDSBINDIR)/zneoasm.exe
+AR			= $(ZDSBINDIR)/zneolib.exe
+
+# File extensions
+
+ASMEXT			= .asm
+OBJEXT			= .obj
+LIBEXT			= .lib
+EXEEXT			= .hex
+
+# These are the macros that will be used in the NuttX make system
+# to compile and assembly source files and to insert the resulting
+# object files into an archive
+
+define COMPILE
+	@#echo "CC: $1"
+	@$(CC) $(CFLAGS) $1
+endef
+
+define ASSEMBLE
+	@#echo "AS: $1"
+	@$(AS) -c $(AFLAGS) $1
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.obj *.src *.lib *.hex *.lst
+endef
+
+# This is the tool to use for dependencies (i.e., none)
+
+MKDEP			= $(TOPDIR)/tools/mknulldeps.sh
+
+# ZNeo-II cannot follow Cygwin soft links, so we will have to use directory copies
+
+DIRLINK 		= $(TOPDIR)/tools/winlink.sh
+DIRUNLINK		= $(TOPDIR)/tools/unlink.sh
+
+# Linux/Cygwin host tool definitions
+
+HOSTCC			= gcc
+HOSTINCLUDES		= -I.
+HOSTCFLAGS		= -Wall -wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		=
diff --git a/nuttx/configs/z16f2800100zcog/pashello/README.txt b/nuttx/configs/z16f2800100zcog/pashello/README.txt
new file mode 100755
index 0000000000..bc98281846
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/README.txt
@@ -0,0 +1,12 @@
+README.txt

+^^^^^^^^^^

+

+pashello.zfpproj is a simple ZDS-II project that will allow you

+  to use the ZDS-II debugger.  Before using, copy the following

+  files from the toplevel directory:

+  

+  nuttx.hex, nuttx.map, nuttx.lod

+  

+  to this directory as:

+  

+  pashello.hex, pashello.map, pashello.lod

diff --git a/nuttx/configs/z16f2800100zcog/pashello/defconfig b/nuttx/configs/z16f2800100zcog/pashello/defconfig
new file mode 100644
index 0000000000..9b2ae19453
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/defconfig
@@ -0,0 +1,338 @@
+############################################################################
+# configs/z16f2800100zcog/pashello/defconfig
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_name - for use in C code.  This identifies the particular
+#   processor architecture (CONFIG_ARCH_Z16).
+# CONFIG_ARCH_CHIP - Identifies the specific chip or SoC that implements the
+#   architecture.
+# CONFIG_ARCH_CHIP_chip - for use in C code.  This identifies the
+#   particular chip or SoC that the architecture is implemented
+#   in (CONFIG_ARCH_CHIP_Z16F)
+# CONFIG_ARCH_CHIP_Z16F2810 - Identifies z16f chip variant
+# CONFIG_ARCH_CHIP_Z16F2811
+# CONFIG_ARCH_CHIP_Z16F3211
+# CONFIG_ARCH_CHIP_Z16F6411
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to z16f.
+#
+CONFIG_ARCH=z16
+CONFIG_ARCH_Z16=y
+CONFIG_ARCH_CHIP=z16f
+CONFIG_ARCH_CHIP_Z16F=y
+CONFIG_ARCH_CHIP_Z16F2810=n
+CONFIG_ARCH_CHIP_Z16F2811=y
+CONFIG_ARCH_CHIP_Z16F3211=n
+CONFIG_ARCH_CHIP_Z16F6411=n
+CONFIG_ARCH_BOARD=z16f2800100zcog
+CONFIG_ARCH_BOARD_Z16F2800100ZCOG=y
+CONFIG_BOARD_LOOPSPERMSEC=1250
+CONFIG_DRAM_SIZE=65536
+CONFIG_ARCH_LEDS=y
+#
+# Z16F specific device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+#   console and ttyS0 (default is the UART0). 
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - 0=1 stop bit; 1=Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART0_BAUD=57600
+CONFIG_UART1_BAUD=57600
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_EXAMPLE - identifies the subdirectory in examples
+#   that will be used in the build
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
+#   time console input
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+#   or TICKS_PER_MSEC=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+#
+CONFIG_EXAMPLE=pashello
+CONFIG_DEBUG=y
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=n
+CONFIG_ARCH_LOWGETC=n
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2008
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=28
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=y
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Settings for examples/nsh
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_CMD_SIZE=40
+CONFIG_EXAMPLES_NSH_STACKSIZE=4096
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
+#   operation from FLASH.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer
+# CONFIG_PROC_STACK_SIZE - The size of the initial stack
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_FROM_FLASH=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_PROC_STACK_SIZE=4096
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=4096
+CONFIG_HEAP_SIZE=
+CONFIG_HEAP_BASE=
diff --git a/nuttx/configs/z16f2800100zcog/pashello/pashello.linkcmd b/nuttx/configs/z16f2800100zcog/pashello/pashello.linkcmd
new file mode 100755
index 0000000000..e254578f1f
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/pashello.linkcmd
@@ -0,0 +1,92 @@
+/****************************************************************************/
+/* configs/z16f2800100zcog/pashello/pashello.linkcmd                        */
+/*                                                                          */
+/*   Copyright (C) 2008 Gregory Nutt. All rights reserved.                  */
+/*   Author: Gregory Nutt <spudmonkey@racsa.co.cr>                          */
+/*                                                                          */
+/* Redistribution and use in source and binary forms, with or without       */
+/* modification, are permitted provided that the following conditions       */
+/* are met:                                                                 */
+/*                                                                          */
+/* 1. Redistributions of source code must retain the above copyright        */
+/*    notice, this list of conditions and the following disclaimer.         */
+/* 2. Redistributions in binary form must reproduce the above copyright     */
+/*    notice, this list of conditions and the following disclaimer in       */
+/*    the documentation and/or other materials provided with the            */
+/*    distribution.                                                         */
+/* 3. Neither the name NuttX nor the names of its contributors may be       */
+/*    used to endorse or promote products derived from this software        */
+/*    without specific prior written permission.                            */
+/*                                                                          */
+/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS      */
+/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT        */
+/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS        */
+/* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE           */
+/* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,     */
+/* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS    */
+/* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED       */
+/* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT              */
+/* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN        */
+/* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE          */
+/* POSSIBILITY OF SUCH DAMAGE.                                              */
+/*                                                                          */
+/****************************************************************************/
+
+-FORMAT=OMF695,INTEL32
+-map -maxhexlen=64 -quiet -sort NAME=ascending -unresolved=fatal
+-warnoverlap -NOxref -warn -debug -NOigcase
+
+RANGE ROM    $000000 : $007FFF
+RANGE RAM    $FFB000 : $FFBFFF
+RANGE IODATA $FFC000 : $FFFFFF
+RANGE EROM   $008000 : $01FFFF
+RANGE ERAM   $800000 : $87FFFF
+
+CHANGE NEAR_TEXT=NEAR_DATA
+CHANGE FAR_TEXT=FAR_DATA
+
+ORDER FAR_BSS,  FAR_DATA
+ORDER NEAR_BSS, NEAR_DATA
+COPY  NEAR_DATA EROM
+COPY  FAR_DATA  EROM
+
+define _0_exit             = 0
+define _low_near_romdata   = copy base of NEAR_DATA
+define _low_neardata       = base of NEAR_DATA
+define _len_neardata       = length of NEAR_DATA
+define _low_far_romdata    = copy base of FAR_DATA
+define _low_fardata        = base of FAR_DATA
+define _len_fardata        = length of FAR_DATA
+define _low_nearbss        = base of NEAR_BSS
+define _len_nearbss        = length of NEAR_BSS
+define _low_farbss         = base of FAR_BSS
+define _len_farbss         = length of FAR_BSS
+define _near_heaptop       = highaddr of RAM
+define _far_heaptop        = highaddr of ERAM
+define _far_stack          = highaddr of ERAM
+define _near_stack         = highaddr of RAM
+define _near_heapbot       = top of RAM
+define _far_heapbot        = top of ERAM
+
+define _SYS_CLK_SRC        = 2
+define _SYS_CLK_FREQ       = 20000000
+
+define __EXTCT_INIT_PARAM  = $80
+define __EXTCS0_INIT_PARAM = $8012
+define __EXTCS1_INIT_PARAM = $8001
+define __EXTCS2_INIT_PARAM = $0000
+define __EXTCS3_INIT_PARAM = $0000
+define __EXTCS4_INIT_PARAM = $0000
+define __EXTCS5_INIT_PARAM = $0000
+
+define __PFAF_INIT_PARAM   = $ff
+define __PGAF_INIT_PARAM   = $ff
+define __PDAF_INIT_PARAM   = $ff00
+define __PAAF_INIT_PARAM   = $0000
+define __PCAF_INIT_PARAM   = $0000
+define __PHAF_INIT_PARAM   = $0300
+define __PKAF_INIT_PARAM   = $0f
+
+/* arch/z16/src/Makefile will append target, object and library paths below */
+
diff --git a/nuttx/configs/z16f2800100zcog/pashello/pashello.zfpproj b/nuttx/configs/z16f2800100zcog/pashello/pashello.zfpproj
new file mode 100755
index 0000000000..9df5cdd0f7
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/pashello.zfpproj
@@ -0,0 +1,238 @@
+<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="c:4.11:07031901">

+<cpu>Z16F2811AL</cpu>

+

+<!-- file information -->

+<files>

+<file filter-key="flash">..\..\..\nuttx.hex</file>

+</files>

+

+<!-- configuration information -->

+<configurations>

+<configuration name="Debug" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild">Z16F2800100ZCOG</option>

+<option name="debugtool" type="string" change-action="none">USBSmartCable</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">true</option>

+<option name="sn" type="string" change-action="none">000000000000000000000000</option>

+<option name="snsize" type="integer" change-action="none">1</option>

+<option name="snstep" type="integer" change-action="none">000000000000000000000001</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">true</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\pashello</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+<configuration name="Release" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild"></option>

+<option name="debugtool" type="string" change-action="none">ZPAKII</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">false</option>

+<option name="sn" type="string" change-action="none">0</option>

+<option name="snsize" type="integer" change-action="none">0</option>

+<option name="snstep" type="integer" change-action="none">1</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">false</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\pashello</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+</configurations>

+

+<!-- watch information -->

+<watch-elements>

+<watch-element expression="0x801d1a" />

+</watch-elements>

+

+<!-- breakpoint information -->

+<breakpoints>

+</breakpoints>

+

+</project>

diff --git a/nuttx/configs/z16f2800100zcog/pashello/setenv.sh b/nuttx/configs/z16f2800100zcog/pashello/setenv.sh
new file mode 100755
index 0000000000..4a9bf1d3bc
--- /dev/null
+++ b/nuttx/configs/z16f2800100zcog/pashello/setenv.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+# z16f2800100zcog/setenv.sh
+#
+#   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# Check how we were executed
+#
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+#
+# The ZDS-II toolchain lies outside of the Cygwin "sandbox" and
+# attempts to set the PATH variable do not have the desired effect.
+# Instead, alias are provided for all of the ZDS-II command line tools.
+# Version 4.11.0 installed in the default location is assumed here.
+#
+ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_ZNEO_4.11.0/bin"
+alias zneoasm="${ZDSBINDIR}/zneoasm.exe"
+alias zneocc="${ZDSBINDIR}/zneocc.exe"
+alias zneolib="${ZDSBINDIR}/zneolib.exe"
+alias zneolink="${ZDSBINDIR}/zneolink.exe"
\ No newline at end of file