diff options
Diffstat (limited to 'doc/tex/ast_cli_commands.tex')
| -rw-r--r-- | doc/tex/ast_cli_commands.tex | 3505 |
1 files changed, 0 insertions, 3505 deletions
diff --git a/doc/tex/ast_cli_commands.tex b/doc/tex/ast_cli_commands.tex deleted file mode 100644 index e7e58b4e4..000000000 --- a/doc/tex/ast_cli_commands.tex +++ /dev/null @@ -1,3505 +0,0 @@ -% This file is automatically generated by the "core dump clidocs" CLI command. Any manual edits will be lost. -\section{!} -\subsection{Summary} -\begin{verbatim} -Execute a shell command -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: !<command> - Executes a given shell command - -\end{verbatim} - - -\section{abort halt} -\subsection{Summary} -\begin{verbatim} -Cancel a running halt -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: abort shutdown - Causes Asterisk to abort an executing shutdown or restart, and resume normal - call operations. - -\end{verbatim} - - -\section{ael debug contexts} -\subsection{Summary} -\begin{verbatim} -Enable AEL contexts debug (does nothing) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{ael debug macros} -\subsection{Summary} -\begin{verbatim} -Enable AEL macros debug (does nothing) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{ael debug read} -\subsection{Summary} -\begin{verbatim} -Enable AEL read debug (does nothing) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{ael debug tokens} -\subsection{Summary} -\begin{verbatim} -Enable AEL tokens debug (does nothing) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{ael nodebug} -\subsection{Summary} -\begin{verbatim} -Disable AEL debug messages -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{ael reload} -\subsection{Summary} -\begin{verbatim} -Reload AEL configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{agent logoff} -\subsection{Summary} -\begin{verbatim} -Sets an agent offline -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agent logoff <channel> [soft] - Sets an agent as no longer logged in. - If 'soft' is specified, do not hangup existing calls. - -\end{verbatim} - - -\section{agent show} -\subsection{Summary} -\begin{verbatim} -Show status of agents -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agent show - Provides summary information on agents. - -\end{verbatim} - - -\section{agent show online} -\subsection{Summary} -\begin{verbatim} -Show all online agents -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agent show online - Provides a list of all online agents. - -\end{verbatim} - - -\section{agi debug} -\subsection{Summary} -\begin{verbatim} -Enable AGI debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agi debug - Enables dumping of AGI transactions for debugging purposes - -\end{verbatim} - - -\section{agi debug off} -\subsection{Summary} -\begin{verbatim} -Disable AGI debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agi debug off - Disables dumping of AGI transactions for debugging purposes - -\end{verbatim} - - -\section{agi dump commanddocs} -\subsection{Summary} -\begin{verbatim} -Dump agi command documentation in LaTeX format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agi dump commanddocs [command] - Dump manager action documentation to /tmp/ast_agi_commands.tex. - -\end{verbatim} - - -\section{agi dumphtml} -\subsection{Summary} -\begin{verbatim} -Dumps a list of agi commands in html format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agi dumphtml <filename> - Dumps the agi command list in html format to given filename - -\end{verbatim} - - -\section{agi show} -\subsection{Summary} -\begin{verbatim} -List AGI commands or specific help -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: agi show [topic] - When called with a topic as an argument, displays usage - information on the given command. If called without a - topic, it provides a list of AGI commands. - -\end{verbatim} - - -\section{cdr status} -\subsection{Summary} -\begin{verbatim} -Display the CDR status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: cdr status - Displays the Call Detail Record engine system status. - -\end{verbatim} - - -\section{console active} -\subsection{Summary} -\begin{verbatim} -Sets/displays active console -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console active [device] - If used without a parameter, displays which device is the current -console. If a device is specified, the console sound device is changed to -the device specified. - -\end{verbatim} - - -\section{console answer} -\subsection{Summary} -\begin{verbatim} -Answer an incoming console call -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console answer - Answers an incoming call on the console (OSS) channel. - -\end{verbatim} - - -\section{console autoanswer [on|off]} -\subsection{Summary} -\begin{verbatim} -Sets/displays autoanswer -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console autoanswer [on|off] - Enables or disables autoanswer feature. If used without - argument, displays the current on/off status of autoanswer. - The default value of autoanswer is in 'oss.conf'. - -\end{verbatim} - - -\section{console boost} -\subsection{Summary} -\begin{verbatim} -Sets/displays mic boost in dB -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{console dial} -\subsection{Summary} -\begin{verbatim} -Dial an extension on the console -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console dial [extension[@context]] - Dials a given extension (and context if specified) - -\end{verbatim} - - -\section{console flash} -\subsection{Summary} -\begin{verbatim} -Flash a call on the console -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console flash - Flashes the call currently placed on the console. - -\end{verbatim} - - -\section{console hangup} -\subsection{Summary} -\begin{verbatim} -Hangup a call on the console -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console hangup - Hangs up any call currently placed on the console. - -\end{verbatim} - - -\section{console {mute|unmute}} -\subsection{Summary} -\begin{verbatim} -Disable/Enable mic input -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console {mute|unmute} - Mute/unmute the microphone. - -\end{verbatim} - - -\section{console send text} -\subsection{Summary} -\begin{verbatim} -Send text to the remote device -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console send text <message> - Sends a text message for display on the remote terminal. - -\end{verbatim} - - -\section{console transfer} -\subsection{Summary} -\begin{verbatim} -Transfer a call to a different extension -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: console transfer <extension>[@context] - Transfers the currently connected call to the given extension (and -context if specified) - -\end{verbatim} - - -\section{core clear profile} -\subsection{Summary} -\begin{verbatim} -Clear profiling info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{core dump appdocs} -\subsection{Summary} -\begin{verbatim} -Dump application documentation in LaTeX format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core dump appdocs [application] - Dump Application documentation to /tmp/ast_appdocs.tex. - -\end{verbatim} - - -\section{core dump clidocs} -\subsection{Summary} -\begin{verbatim} -Dump CLI command documentation in LaTeX format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core dump clidocs - Dump CLI command documentation to /tmp/ast_cli_commands.tex. - -\end{verbatim} - - -\section{core dump funcdocs} -\subsection{Summary} -\begin{verbatim} -Dump function documentation in LaTeX format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core dump funcdocs [function] - Dump Application documentation to /tmp/ast_funcdocs.tex. - -\end{verbatim} - - -\section{core set debug channel} -\subsection{Summary} -\begin{verbatim} -Enable/disable debugging on a channel -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core set debug channel <all|channel> [off] - Enables/disables debugging on all or on a specific channel. - -\end{verbatim} - - -\section{core set {debug|verbose} [off|atleast]} -\subsection{Summary} -\begin{verbatim} -Set level of debug/verbose chattiness -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core set {debug|verbose} [atleast] <level> - core set {debug|verbose} off - Sets level of debug or verbose messages to be displayed. - 0 or off means no messages should be displayed. - Equivalent to -d[d[...]] or -v[v[v...]] on startup - -\end{verbatim} - - -\section{core set global} -\subsection{Summary} -\begin{verbatim} -Set global dialplan variable -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core set global <name> <value> - Set global dialplan variable <name> to <value> - -\end{verbatim} - - -\section{core show applications} -\subsection{Summary} -\begin{verbatim} -Shows registered dialplan applications -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show applications [{like|describing} <text>] - List applications which are currently available. - If 'like', <text> will be a substring of the app name - If 'describing', <text> will be a substring of the description - -\end{verbatim} - - -\section{core show application} -\subsection{Summary} -\begin{verbatim} -Describe a specific dialplan application -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show application <application> [<application> [<application> [...]]] - Describes a particular application. - -\end{verbatim} - - -\section{core show channels [concise|verbose|count]} -\subsection{Summary} -\begin{verbatim} -Display information on channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show channels [concise|verbose|count] - Lists currently defined channels and some information about them. If - 'concise' is specified, the format is abridged and in a more easily - machine parsable format. If 'verbose' is specified, the output includes - more and longer fields. If 'count' is specified only the channel and call - count is output. - -\end{verbatim} - - -\section{core show channel} -\subsection{Summary} -\begin{verbatim} -Display information on a specific channel -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show channel <channel> - Shows lots of information about the specified channel. - -\end{verbatim} - - -\section{core show channeltypes} -\subsection{Summary} -\begin{verbatim} -List available channel types -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show channeltypes - Lists available channel types registered in your Asterisk server. - -\end{verbatim} - - -\section{core show channeltype} -\subsection{Summary} -\begin{verbatim} -Give more details on that channel type -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show channeltype <name> - Show details about the specified channel type, <name>. - -\end{verbatim} - - -\section{core show codecs} -\subsection{Summary} -\begin{verbatim} -Displays a list of codecs -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show codecs [audio|video|image] - Displays codec mapping - -\end{verbatim} - - -\section{core show codecs audio} -\subsection{Summary} -\begin{verbatim} -Displays a list of audio codecs -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show codecs [audio|video|image] - Displays codec mapping - -\end{verbatim} - - -\section{core show codecs image} -\subsection{Summary} -\begin{verbatim} -Displays a list of image codecs -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show codecs [audio|video|image] - Displays codec mapping - -\end{verbatim} - - -\section{core show codecs video} -\subsection{Summary} -\begin{verbatim} -Displays a list of video codecs -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show codecs [audio|video|image] - Displays codec mapping - -\end{verbatim} - - -\section{core show codec} -\subsection{Summary} -\begin{verbatim} -Shows a specific codec -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show codec <number> - Displays codec mapping - -\end{verbatim} - - -\section{core show config mappings} -\subsection{Summary} -\begin{verbatim} -Display config mappings (file names to config engines) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show config mappings - Shows the filenames to config engines. - -\end{verbatim} - - -\section{core show file formats} -\subsection{Summary} -\begin{verbatim} -Displays file formats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show file formats - Displays currently registered file formats (if any) - -\end{verbatim} - - -\section{core show file version} -\subsection{Summary} -\begin{verbatim} -List versions of files used to build Asterisk -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show file version [like <pattern>] - Lists the revision numbers of the files used to build this copy of Asterisk. - Optional regular expression pattern is used to filter the file list. - -\end{verbatim} - - -\section{core show functions} -\subsection{Summary} -\begin{verbatim} -Shows registered dialplan functions -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show functions [like <text>] - List builtin functions, optionally only those matching a given string - -\end{verbatim} - - -\section{core show function} -\subsection{Summary} -\begin{verbatim} -Describe a specific dialplan function -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show function <function> - Describe a particular dialplan function. - -\end{verbatim} - - -\section{core show globals} -\subsection{Summary} -\begin{verbatim} -Show global dialplan variables -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show globals - List current global dialplan variables and their values - -\end{verbatim} - - -\section{core show hints} -\subsection{Summary} -\begin{verbatim} -Show dialplan hints -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show hints - List registered hints - -\end{verbatim} - - -\section{core show image formats} -\subsection{Summary} -\begin{verbatim} -Displays image formats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show image formats - displays currently registered image formats (if any) - -\end{verbatim} - - -\section{core show license} -\subsection{Summary} -\begin{verbatim} -Show the license(s) for this copy of Asterisk -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show license - Shows the license(s) for this copy of Asterisk. - -\end{verbatim} - - -\section{core show profile} -\subsection{Summary} -\begin{verbatim} -Display profiling info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{core show settings} -\subsection{Summary} -\begin{verbatim} -Show some core settings -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -(null) -\end{verbatim} - - -\section{core show switches} -\subsection{Summary} -\begin{verbatim} -Show alternative switches -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show switches - List registered switches - -\end{verbatim} - - -\section{core show sysinfo} -\subsection{Summary} -\begin{verbatim} -Show System Information -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show sysinfo - List current system information. - -\end{verbatim} - - -\section{core show threads} -\subsection{Summary} -\begin{verbatim} -Show running threads -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show threads - List threads currently active in the system. - -\end{verbatim} - - -\section{core show translation} -\subsection{Summary} -\begin{verbatim} -Display translation matrix -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show translation [recalc] [<recalc seconds>] - Displays known codec translators and the cost associated -with each conversion. If the argument 'recalc' is supplied along -with optional number of seconds to test a new test will be performed -as the chart is being displayed. - -\end{verbatim} - - -\section{core show uptime [seconds]} -\subsection{Summary} -\begin{verbatim} -Show uptime information -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show uptime [seconds] - Shows Asterisk uptime information. - The seconds word returns the uptime in seconds only. - -\end{verbatim} - - -\section{core show version} -\subsection{Summary} -\begin{verbatim} -Display version info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show version - Shows Asterisk version information. - -\end{verbatim} - - -\section{core show warranty} -\subsection{Summary} -\begin{verbatim} -Show the warranty (if any) for this copy of Asterisk -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show warranty - Shows the warranty (if any) for this copy of Asterisk. - -\end{verbatim} - - -\section{database del} -\subsection{Summary} -\begin{verbatim} -Removes database key/value -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database del <family> <key> - Deletes an entry in the Asterisk database for a given -family and key. - -\end{verbatim} - - -\section{database deltree} -\subsection{Summary} -\begin{verbatim} -Removes database keytree/values -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database deltree <family> [keytree] - Deletes a family or specific keytree within a family -in the Asterisk database. - -\end{verbatim} - - -\section{database get} -\subsection{Summary} -\begin{verbatim} -Gets database value -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database get <family> <key> - Retrieves an entry in the Asterisk database for a given -family and key. - -\end{verbatim} - - -\section{database put} -\subsection{Summary} -\begin{verbatim} -Adds/updates database value -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database put <family> <key> <value> - Adds or updates an entry in the Asterisk database for -a given family, key, and value. - -\end{verbatim} - - -\section{database show} -\subsection{Summary} -\begin{verbatim} -Shows database contents -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database show [family [keytree]] - Shows Asterisk database contents, optionally restricted -to a given family, or family and keytree. - -\end{verbatim} - - -\section{database showkey} -\subsection{Summary} -\begin{verbatim} -Shows database contents -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: database showkey <keytree> - Shows Asterisk database contents, restricted to a given key. - -\end{verbatim} - - -\section{dialplan add extension} -\subsection{Summary} -\begin{verbatim} -Add new extension into context -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan add extension <exten>,<priority>,<app>,<app-data> - into <context> [replace] - - This command will add new extension into <context>. If there is an - existence of extension with the same priority and last 'replace' - arguments is given here we simply replace this extension. - -Example: dialplan add extension 6123,1,Dial,IAX/216.207.245.56/6123 into local - Now, you can dial 6123 and talk to Markster :) - -\end{verbatim} - - -\section{dialplan add ignorepat} -\subsection{Summary} -\begin{verbatim} -Add new ignore pattern -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan add ignorepat <pattern> into <context> - This command adds a new ignore pattern into context <context> - -Example: dialplan add ignorepat _3XX into local - -\end{verbatim} - - -\section{dialplan add include} -\subsection{Summary} -\begin{verbatim} -Include context in other context -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan add include <context> into <context> - Include a context in another context. - -\end{verbatim} - - -\section{dialplan reload} -\subsection{Summary} -\begin{verbatim} -Reload extensions and *only* extensions -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan reload - reload extensions.conf without reloading any other modules - This command does not delete global variables unless - clearglobalvars is set to yes in extensions.conf - -\end{verbatim} - - -\section{dialplan remove extension} -\subsection{Summary} -\begin{verbatim} -Remove a specified extension -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan remove extension exten@context [priority] - Remove an extension from a given context. If a priority - is given, only that specific priority from the given extension - will be removed. - -\end{verbatim} - - -\section{dialplan remove ignorepat} -\subsection{Summary} -\begin{verbatim} -Remove ignore pattern from context -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan remove ignorepat <pattern> from <context> - This command removes an ignore pattern from context <context> - -Example: dialplan remove ignorepat _3XX from local - -\end{verbatim} - - -\section{dialplan remove include} -\subsection{Summary} -\begin{verbatim} -Remove a specified include from context -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan remove include <context> from <context> - Remove an included context from another context. - -\end{verbatim} - - -\section{dialplan save} -\subsection{Summary} -\begin{verbatim} -Save dialplan -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dialplan save [/path/to/extension/file] - Save dialplan created by pbx_config module. - -Example: dialplan save (/etc/asterisk/extensions.conf) - dialplan save /home/markster (/home/markster/extensions.conf) - -\end{verbatim} - - -\section{dialplan show} -\subsection{Summary} -\begin{verbatim} -Show dialplan -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core show dialplan [exten@][context] - Show dialplan - -\end{verbatim} - - -\section{dnsmgr reload} -\subsection{Summary} -\begin{verbatim} -Reloads the DNS manager configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dnsmgr reload - Reloads the DNS manager configuration. - -\end{verbatim} - - -\section{dnsmgr status} -\subsection{Summary} -\begin{verbatim} -Display the DNS manager status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dnsmgr status - Displays the DNS manager status. - -\end{verbatim} - - -\section{dundi debug} -\subsection{Summary} -\begin{verbatim} -Enable DUNDi debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi debug - Enables dumping of DUNDi packets for debugging purposes - -\end{verbatim} - - -\section{dundi flush} -\subsection{Summary} -\begin{verbatim} -Flush DUNDi cache -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi flush [stats] - Flushes DUNDi answer cache, used primarily for debug. If -'stats' is present, clears timer statistics instead of normal -operation. - -\end{verbatim} - - -\section{dundi lookup} -\subsection{Summary} -\begin{verbatim} -Lookup a number in DUNDi -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi lookup <number>[@context] [bypass] - Lookup the given number within the given DUNDi context -(or e164 if none is specified). Bypasses cache if 'bypass' -keyword is specified. - -\end{verbatim} - - -\section{dundi no debug} -\subsection{Summary} -\begin{verbatim} -Disable DUNDi debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi no debug - Disables dumping of DUNDi packets for debugging purposes - -\end{verbatim} - - -\section{dundi no store history} -\subsection{Summary} -\begin{verbatim} -Disable DUNDi historic records -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi no store history - Disables storing of DUNDi requests and times for debugging -purposes - -\end{verbatim} - - -\section{dundi precache} -\subsection{Summary} -\begin{verbatim} -Precache a number in DUNDi -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi precache <number>[@context] - Lookup the given number within the given DUNDi context -(or e164 if none is specified) and precaches the results to any -upstream DUNDi push servers. - -\end{verbatim} - - -\section{dundi query} -\subsection{Summary} -\begin{verbatim} -Query a DUNDi EID -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi query <entity>[@context] - Attempts to retrieve contact information for a specific -DUNDi entity identifier (EID) within a given DUNDi context (or -e164 if none is specified). - -\end{verbatim} - - -\section{dundi show entityid} -\subsection{Summary} -\begin{verbatim} -Display Global Entity ID -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show entityid - Displays the global entityid for this host. - -\end{verbatim} - - -\section{dundi show mappings} -\subsection{Summary} -\begin{verbatim} -Show DUNDi mappings -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show mappings - Lists all known DUNDi mappings. - -\end{verbatim} - - -\section{dundi show peers} -\subsection{Summary} -\begin{verbatim} -Show defined DUNDi peers -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show peers - Lists all known DUNDi peers. - -\end{verbatim} - - -\section{dundi show peer} -\subsection{Summary} -\begin{verbatim} -Show info on a specific DUNDi peer -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show peer [peer] - Provide a detailed description of a specifid DUNDi peer. - -\end{verbatim} - - -\section{dundi show precache} -\subsection{Summary} -\begin{verbatim} -Show DUNDi precache -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show precache - Lists all known DUNDi scheduled precache updates. - -\end{verbatim} - - -\section{dundi show requests} -\subsection{Summary} -\begin{verbatim} -Show DUNDi requests -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show requests - Lists all known pending DUNDi requests. - -\end{verbatim} - - -\section{dundi show trans} -\subsection{Summary} -\begin{verbatim} -Show active DUNDi transactions -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi show trans - Lists all known DUNDi transactions. - -\end{verbatim} - - -\section{dundi store history} -\subsection{Summary} -\begin{verbatim} -Enable DUNDi historic records -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: dundi store history - Enables storing of DUNDi requests and times for debugging -purposes - -\end{verbatim} - - -\section{feature show} -\subsection{Summary} -\begin{verbatim} -Lists configured features -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: feature list - Lists currently configured features. - -\end{verbatim} - - -\section{file convert} -\subsection{Summary} -\begin{verbatim} -Convert audio file -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: file convert <file_in> <file_out> - Convert from file_in to file_out. If an absolute path is not given, the -default Asterisk sounds directory will be used. - -Example: - file convert tt-weasels.gsm tt-weasels.ulaw - -\end{verbatim} - - -\section{funcdevstate list} -\subsection{Summary} -\begin{verbatim} -List currently known custom device states -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: funcdevstate list - List all custom device states that have been set by using - the DEVSTATE dialplan function. - -\end{verbatim} - - -\section{group show channels} -\subsection{Summary} -\begin{verbatim} -Display active channels with group(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: group show channels [pattern] - Lists all currently active channels with channel group(s) specified. - Optional regular expression pattern is matched to group names for each - channel. - -\end{verbatim} - - -\section{gtalk reload} -\subsection{Summary} -\begin{verbatim} -Enable Jabber debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: gtalk reload - Reload gtalk channel driver. - -\end{verbatim} - - -\section{gtalk show channels} -\subsection{Summary} -\begin{verbatim} -Show GoogleTalk Channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: gtalk show channels - Shows current state of the Gtalk channels. - -\end{verbatim} - - -\section{h323 cycle gk} -\subsection{Summary} -\begin{verbatim} -Manually re-register with the Gatekeper -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 gk cycle - Manually re-register with the Gatekeper (Currently Disabled) - -\end{verbatim} - - -\section{h323 hangup} -\subsection{Summary} -\begin{verbatim} -Manually try to hang up a call -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 hangup <token> - Manually try to hang up call identified by <token> - -\end{verbatim} - - -\section{h323 reload} -\subsection{Summary} -\begin{verbatim} -Reload H.323 configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 reload - Reloads H.323 configuration from h323.conf - -\end{verbatim} - - -\section{h323 set debug} -\subsection{Summary} -\begin{verbatim} -Enable H.323 debug -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 debug - Enables H.323 debug output - -\end{verbatim} - - -\section{h323 set debug off} -\subsection{Summary} -\begin{verbatim} -Disable H.323 debug -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 no debug - Disables H.323 debug output - -\end{verbatim} - - -\section{h323 set trace} -\subsection{Summary} -\begin{verbatim} -Enable H.323 Stack Tracing -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 trace <level num> - Enables H.323 stack tracing for debugging purposes - -\end{verbatim} - - -\section{h323 set trace off} -\subsection{Summary} -\begin{verbatim} -Disable H.323 Stack Tracing -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 no trace - Disables H.323 stack tracing for debugging purposes - -\end{verbatim} - - -\section{h323 show tokens} -\subsection{Summary} -\begin{verbatim} -Show all active call tokens -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: h323 show tokens - Print out all active call tokens - -\end{verbatim} - - -\section{help} -\subsection{Summary} -\begin{verbatim} -Display help list, or specific help on a command -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: help [topic] - When called with a topic as an argument, displays usage - information on the given command. If called without a - topic, it provides a list of commands. - -\end{verbatim} - - -\section{http show status} -\subsection{Summary} -\begin{verbatim} -Display HTTP server status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: http show status - Lists status of internal HTTP engine - -\end{verbatim} - - -\section{iax2 provision} -\subsection{Summary} -\begin{verbatim} -Provision an IAX device -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 provision <host> <template> [forced] - Provisions the given peer or IP address using a template - matching either 'template' or '*' if the template is not - found. If 'forced' is specified, even empty provisioning - fields will be provisioned as empty fields. - -\end{verbatim} - - -\section{iax2 prune realtime} -\subsection{Summary} -\begin{verbatim} -Prune a cached realtime lookup -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 prune realtime [<peername>|all] - Prunes object(s) from the cache - -\end{verbatim} - - -\section{iax2 reload} -\subsection{Summary} -\begin{verbatim} -Reload IAX configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 reload - Reloads IAX configuration from iax.conf - -\end{verbatim} - - -\section{iax2 set debug} -\subsection{Summary} -\begin{verbatim} -Enable IAX debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug - Enables dumping of IAX packets for debugging purposes - -\end{verbatim} - - -\section{iax2 set debug jb} -\subsection{Summary} -\begin{verbatim} -Enable IAX jitterbuffer debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug jb - Enables jitterbuffer debugging information - -\end{verbatim} - - -\section{iax2 set debug jb off} -\subsection{Summary} -\begin{verbatim} -Disable IAX jitterbuffer debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug jb off - Disables jitterbuffer debugging information - -\end{verbatim} - - -\section{iax2 set debug off} -\subsection{Summary} -\begin{verbatim} -Disable IAX debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug off - Disables dumping of IAX packets for debugging purposes - -\end{verbatim} - - -\section{iax2 set debug trunk} -\subsection{Summary} -\begin{verbatim} -Enable IAX trunk debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug trunk - Requests current status of IAX trunking - -\end{verbatim} - - -\section{iax2 set debug trunk off} -\subsection{Summary} -\begin{verbatim} -Disable IAX trunk debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set debug trunk off - Requests current status of IAX trunking - -\end{verbatim} - - -\section{iax2 set mtu} -\subsection{Summary} -\begin{verbatim} -Set the IAX systemwide trunking MTU -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 set mtu <value> - Set the system-wide IAX IP mtu to <value> bytes net or zero to disable. - Disabling means that the operating system must handle fragmentation of UDP packets - when the IAX2 trunk packet exceeds the UDP payload size. - This is substantially below the IP mtu. Try 1240 on ethernets. - Must be 172 or greater for G.711 samples. - -\end{verbatim} - - -\section{iax2 show cache} -\subsection{Summary} -\begin{verbatim} -Display IAX cached dialplan -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show cache - Display currently cached IAX Dialplan results. - -\end{verbatim} - - -\section{iax2 show channels} -\subsection{Summary} -\begin{verbatim} -List active IAX channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show channels - Lists all currently active IAX channels. - -\end{verbatim} - - -\section{iax2 show firmware} -\subsection{Summary} -\begin{verbatim} -List available IAX firmwares -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show firmware - Lists all known IAX firmware images. - -\end{verbatim} - - -\section{iax2 show netstats} -\subsection{Summary} -\begin{verbatim} -List active IAX channel netstats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show netstats - Lists network status for all currently active IAX channels. - -\end{verbatim} - - -\section{iax2 show peers} -\subsection{Summary} -\begin{verbatim} -List defined IAX peers -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show peers [registered] [like <pattern>] - Lists all known IAX2 peers. - Optional 'registered' argument lists only peers with known addresses. - Optional regular expression pattern is used to filter the peer list. - -\end{verbatim} - - -\section{iax2 show peer} -\subsection{Summary} -\begin{verbatim} -Show details on specific IAX peer -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show peer <name> - Display details on specific IAX peer - -\end{verbatim} - - -\section{iax2 show provisioning} -\subsection{Summary} -\begin{verbatim} -Display iax provisioning -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax list provisioning [template] - Lists all known IAX provisioning templates or a - specific one if specified. - -\end{verbatim} - - -\section{iax2 show registry} -\subsection{Summary} -\begin{verbatim} -Display IAX registration status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show registry - Lists all registration requests and status. - -\end{verbatim} - - -\section{iax2 show stats} -\subsection{Summary} -\begin{verbatim} -Display IAX statistics -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show stats - Display statistics on IAX channel driver. - -\end{verbatim} - - -\section{iax2 show threads} -\subsection{Summary} -\begin{verbatim} -Display IAX helper thread info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show threads - Lists status of IAX helper threads - -\end{verbatim} - - -\section{iax2 show users} -\subsection{Summary} -\begin{verbatim} -List defined IAX users -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 show users [like <pattern>] - Lists all known IAX2 users. - Optional regular expression pattern is used to filter the user list. - -\end{verbatim} - - -\section{iax2 test losspct} -\subsection{Summary} -\begin{verbatim} -Set IAX2 incoming frame loss percentage -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 test losspct <percentage> - For testing, throws away <percentage> percent of incoming packets - -\end{verbatim} - - -\section{iax2 unregister} -\subsection{Summary} -\begin{verbatim} -Unregister (force expiration) an IAX2 peer from the registry -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: iax2 unregister <peername> - Unregister (force expiration) an IAX2 peer from the registry. - -\end{verbatim} - - -\section{indication add} -\subsection{Summary} -\begin{verbatim} -Add the given indication to the country -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: indication add <country> <indication> "<tonelist>" - Add the given indication to the country. - -\end{verbatim} - - -\section{indication remove} -\subsection{Summary} -\begin{verbatim} -Remove the given indication from the country -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: indication remove <country> <indication> - Remove the given indication from the country. - -\end{verbatim} - - -\section{indication show} -\subsection{Summary} -\begin{verbatim} -Display a list of all countries/indications -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: indication show [<country> ...] - Display either a condensed for of all country/indications, or the - indications for the specified countries. - -\end{verbatim} - - -\section{jabber debug} -\subsection{Summary} -\begin{verbatim} -Enable Jabber debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: jabber debug - Enables dumping of Jabber packets for debugging purposes. - -\end{verbatim} - - -\section{jabber debug off} -\subsection{Summary} -\begin{verbatim} -Disable Jabber debug -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: jabber debug off - Disables dumping of Jabber packets for debugging purposes. - -\end{verbatim} - - -\section{jabber reload} -\subsection{Summary} -\begin{verbatim} -Reload Jabber configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: jabber reload - Enables reloading of Jabber module. - -\end{verbatim} - - -\section{jabber show connected} -\subsection{Summary} -\begin{verbatim} -Show state of clients and components -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: jabber debug - Enables dumping of Jabber packets for debugging purposes. - -\end{verbatim} - - -\section{jabber test} -\subsection{Summary} -\begin{verbatim} -Shows roster, but is generally used for mog's debugging. -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: jabber test [client] - Sends test message for debugging purposes. A specific client - as configured in jabber.conf can be optionally specified. - -\end{verbatim} - - -\section{keys init} -\subsection{Summary} -\begin{verbatim} -Initialize RSA key passcodes -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: keys init - Initializes private keys (by reading in pass code from the user) - -\end{verbatim} - - -\section{keys show} -\subsection{Summary} -\begin{verbatim} -Displays RSA key information -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: keys show - Displays information about RSA keys known by Asterisk - -\end{verbatim} - - -\section{local show channels} -\subsection{Summary} -\begin{verbatim} -List status of local channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: local show channels - Provides summary information on active local proxy channels. - -\end{verbatim} - - -\section{logger mute} -\subsection{Summary} -\begin{verbatim} -Toggle logging output to a console -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: logger mute - Disables logging output to the current console, making it possible to - gather information without being disturbed by scrolling lines. - -\end{verbatim} - - -\section{logger reload} -\subsection{Summary} -\begin{verbatim} -Reopens the log files -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: logger reload - Reloads the logger subsystem state. Use after restarting syslogd(8) if you are using syslog logging. - -\end{verbatim} - - -\section{logger rotate} -\subsection{Summary} -\begin{verbatim} -Rotates and reopens the log files -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: logger rotate - Rotates and Reopens the log files. - -\end{verbatim} - - -\section{logger show channels} -\subsection{Summary} -\begin{verbatim} -List configured log channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: logger show channels - List configured logger channels. - -\end{verbatim} - - -\section{manager debug} -\subsection{Summary} -\begin{verbatim} -Show, enable, disable debugging of the manager code -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager debug [on|off] - Show, enable, disable debugging of the manager code. - -\end{verbatim} - - -\section{manager dump actiondocs} -\subsection{Summary} -\begin{verbatim} -Dump manager action documentation in LaTeX format -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager dump actiondocs [action] - Dump manager action documentation to /tmp/ast_manager_actiondocs.tex. - -\end{verbatim} - - -\section{manager show command} -\subsection{Summary} -\begin{verbatim} -Show a manager interface command -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager show command <actionname> - Shows the detailed description for a specific Asterisk manager interface command. - -\end{verbatim} - - -\section{manager show commands} -\subsection{Summary} -\begin{verbatim} -List manager interface commands -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager show commands - Prints a listing of all the available Asterisk manager interface commands. - -\end{verbatim} - - -\section{manager show connected} -\subsection{Summary} -\begin{verbatim} -List connected manager interface users -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager show connected - Prints a listing of the users that are currently connected to the -Asterisk manager interface. - -\end{verbatim} - - -\section{manager show eventq} -\subsection{Summary} -\begin{verbatim} -List manager interface queued events -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager show eventq - Prints a listing of all events pending in the Asterisk manger -event queue. - -\end{verbatim} - - -\section{manager show users} -\subsection{Summary} -\begin{verbatim} -List configured manager users -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: manager show users - Prints a listing of all managers that are currently configured on that - system. - -\end{verbatim} - - -\section{manager show user} -\subsection{Summary} -\begin{verbatim} -Display information on a specific manager user -\end{verbatim} -\subsection{Usage} -\begin{verbatim} - Usage: manager show user <user> - Display all information related to the manager user specified. - -\end{verbatim} - - -\section{meetme} -\subsection{Summary} -\begin{verbatim} -Execute a command on a conference or conferee -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: meetme (un)lock|(un)mute|kick|list [concise] <confno> <usernumber> - Executes a command for the conference or on a conferee - -\end{verbatim} - - -\section{memory show allocations} -\subsection{Summary} -\begin{verbatim} -Display outstanding memory allocations -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: memory show allocations [<file>] - Dumps a list of all segments of allocated memory, optionally -limited to those from a specific file - -\end{verbatim} - - -\section{memory show summary} -\subsection{Summary} -\begin{verbatim} -Summarize outstanding memory allocations -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: memory show summary [<file>] - Summarizes heap memory allocations by file, or optionally -by function, if a file is specified - -\end{verbatim} - - -\section{mgcp audit endpoint} -\subsection{Summary} -\begin{verbatim} -Audit specified MGCP endpoint -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: mgcp audit endpoint <endpointid> - Lists the capabilities of an endpoint in the MGCP (Media Gateway Control Protocol) subsystem. - mgcp debug MUST be on to see the results of this command. - -\end{verbatim} - - -\section{mgcp reload} -\subsection{Summary} -\begin{verbatim} -Reload MGCP configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: mgcp reload - Reloads MGCP configuration from mgcp.conf - Deprecated: please use 'reload chan_mgcp.so' instead. - -\end{verbatim} - - -\section{mgcp set debug} -\subsection{Summary} -\begin{verbatim} -Enable MGCP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: mgcp set debug - Enables dumping of MGCP packets for debugging purposes - -\end{verbatim} - - -\section{mgcp set debug off} -\subsection{Summary} -\begin{verbatim} -Disable MGCP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: mgcp set debug off - Disables dumping of MGCP packets for debugging purposes - -\end{verbatim} - - -\section{mgcp show endpoints} -\subsection{Summary} -\begin{verbatim} -List defined MGCP endpoints -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: mgcp show endpoints - Lists all endpoints known to the MGCP (Media Gateway Control Protocol) subsystem. - -\end{verbatim} - - -\section{minivm list accounts} -\subsection{Summary} -\begin{verbatim} -List defined mini-voicemail boxes -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm list accounts - Lists all mailboxes currently set up - -\end{verbatim} - - -\section{minivm list templates} -\subsection{Summary} -\begin{verbatim} -List message templates -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm list templates - Lists message templates for e-mail, paging and IM - -\end{verbatim} - - -\section{minivm list zones} -\subsection{Summary} -\begin{verbatim} -List zone message formats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm list zones - Lists zone message formats - -\end{verbatim} - - -\section{minivm reload} -\subsection{Summary} -\begin{verbatim} -Reload Mini-voicemail configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm reload - Reload mini-voicemail configuration and reset statistics - -\end{verbatim} - - -\section{minivm show settings} -\subsection{Summary} -\begin{verbatim} -Show mini-voicemail general settings -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm show settings - Display Mini-Voicemail general settings - -\end{verbatim} - - -\section{minivm show stats} -\subsection{Summary} -\begin{verbatim} -Show some mini-voicemail statistics -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: minivm show stats - Display Mini-Voicemail counters - -\end{verbatim} - - -\section{mixmonitor} -\subsection{Summary} -\begin{verbatim} -Execute a MixMonitor command. -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -mixmonitor <start|stop> <chan_name> [args] - -The optional arguments are passed to the -MixMonitor application when the 'start' command is used. - -\end{verbatim} - - -\section{module load} -\subsection{Summary} -\begin{verbatim} -Load a module by name -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: module load <module name> - Loads the specified module into Asterisk. - -\end{verbatim} - - -\section{module reload} -\subsection{Summary} -\begin{verbatim} -Reload configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: module reload [module ...] - Reloads configuration files for all listed modules which support - reloading, or for all supported modules if none are listed. - -\end{verbatim} - - -\section{module show [like]} -\subsection{Summary} -\begin{verbatim} -List modules and info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: module show [like keyword] - Shows Asterisk modules currently in use, and usage statistics. - -\end{verbatim} - - -\section{module unload} -\subsection{Summary} -\begin{verbatim} -Unload a module by name -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: module unload [-f|-h] <module_1> [<module_2> ... ] - Unloads the specified module from Asterisk. The -f - option causes the module to be unloaded even if it is - in use (may cause a crash) and the -h module causes the - module to be unloaded even if the module says it cannot, - which almost always will cause a crash. - -\end{verbatim} - - -\section{moh reload} -\subsection{Summary} -\begin{verbatim} -Music On Hold -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Music On Hold -\end{verbatim} - - -\section{moh show classes} -\subsection{Summary} -\begin{verbatim} -List MOH classes -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Lists all MOH classes -\end{verbatim} - - -\section{moh show files} -\subsection{Summary} -\begin{verbatim} -List MOH file-based classes -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Lists all loaded file-based MOH classes and their files -\end{verbatim} - - -\section{no debug channel} -\subsection{Summary} -\begin{verbatim} -Disable debugging on channel(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: core set debug channel <all|channel> [off] - Enables/disables debugging on all or on a specific channel. - -\end{verbatim} - - -\section{odbc show} -\subsection{Summary} -\begin{verbatim} -List ODBC DSN(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: odbc show [<class>] - List settings of a particular ODBC class. - or, if not specified, all classes. - -\end{verbatim} - - -\section{originate} -\subsection{Summary} -\begin{verbatim} -Originate a call -\end{verbatim} -\subsection{Usage} -\begin{verbatim} - There are two ways to use this command. A call can be originated between a -channel and a specific application, or between a channel and an extension in -the dialplan. This is similar to call files or the manager originate action. -Calls originated with this command are given a timeout of 30 seconds. - -Usage1: originate <tech/data> application <appname> [appdata] - This will originate a call between the specified channel tech/data and the -given application. Arguments to the application are optional. If the given -arguments to the application include spaces, all of the arguments to the -application need to be placed in quotation marks. - -Usage2: originate <tech/data> extension [exten@][context] - This will originate a call between the specified channel tech/data and the -given extension. If no context is specified, the 'default' context will be -used. If no extension is given, the 's' extension will be used. - -\end{verbatim} - - -\section{parkedcalls show} -\subsection{Summary} -\begin{verbatim} -List currently parked calls -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: parkedcalls show - List currently parked calls - -\end{verbatim} - - -\section{queue add member} -\subsection{Summary} -\begin{verbatim} -Add a channel to a specified queue -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: queue add member <channel> to <queue> [penalty <penalty>] - -\end{verbatim} - - -\section{queue remove member} -\subsection{Summary} -\begin{verbatim} -Removes a channel from a specified queue -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: queue remove member <channel> from <queue> - -\end{verbatim} - - -\section{queue show} -\subsection{Summary} -\begin{verbatim} -Show status of a specified queue -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: queue show - Provides summary information on a specified queue. - -\end{verbatim} - - -\section{realtime load} -\subsection{Summary} -\begin{verbatim} -Used to print out RealTime variables. -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: realtime load <family> <colmatch> <value> - Prints out a list of variables using the RealTime driver. - -\end{verbatim} - - -\section{realtime update} -\subsection{Summary} -\begin{verbatim} -Used to update RealTime variables. -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: realtime update <family> <colmatch> <value> - Update a single variable using the RealTime driver. - -\end{verbatim} - - -\section{restart gracefully} -\subsection{Summary} -\begin{verbatim} -Restart Asterisk gracefully -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: restart gracefully - Causes Asterisk to stop accepting new calls and exec() itself performing a cold - restart when all active calls have ended. - -\end{verbatim} - - -\section{restart now} -\subsection{Summary} -\begin{verbatim} -Restart Asterisk immediately -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: restart now - Causes Asterisk to hangup all calls and exec() itself performing a cold - restart. - -\end{verbatim} - - -\section{restart when convenient} -\subsection{Summary} -\begin{verbatim} -Restart Asterisk at empty call volume -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: restart when convenient - Causes Asterisk to perform a cold restart when all active calls have ended. - -\end{verbatim} - - -\section{rpt debug level} -\subsection{Summary} -\begin{verbatim} -Enable app_rpt debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt debug level {0-7} - Enables debug messages in app_rpt - -\end{verbatim} - - -\section{rpt dump} -\subsection{Summary} -\begin{verbatim} -Dump app_rpt structs for debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt dump <nodename> - Dumps struct debug info to log - -\end{verbatim} - - -\section{rpt lstats} -\subsection{Summary} -\begin{verbatim} -Dump link statistics -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt lstats <nodename> - Dumps link statistics to console - -\end{verbatim} - - -\section{rpt reload} -\subsection{Summary} -\begin{verbatim} -Reload app_rpt config -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt reload - Reloads app_rpt running config parameters - -\end{verbatim} - - -\section{rpt restart} -\subsection{Summary} -\begin{verbatim} -Restart app_rpt -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt restart - Restarts app_rpt - -\end{verbatim} - - -\section{rpt stats} -\subsection{Summary} -\begin{verbatim} -Dump node statistics -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rpt stats <nodename> - Dumps node statistics to console - -\end{verbatim} - - -\section{rtcp debug ip} -\subsection{Summary} -\begin{verbatim} -Enable RTCP debugging on IP -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtcp debug [ip host[:port]] - Enable dumping of all RTCP packets to and from host. - -\end{verbatim} - - -\section{rtcp debug} -\subsection{Summary} -\begin{verbatim} -Enable RTCP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtcp debug [ip host[:port]] - Enable dumping of all RTCP packets to and from host. - -\end{verbatim} - - -\section{rtcp debug off} -\subsection{Summary} -\begin{verbatim} -Disable RTCP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtcp debug off - Disable all RTCP debugging - -\end{verbatim} - - -\section{rtcp stats} -\subsection{Summary} -\begin{verbatim} -Enable RTCP stats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtcp stats - Enable dumping of RTCP stats. - -\end{verbatim} - - -\section{rtcp stats off} -\subsection{Summary} -\begin{verbatim} -Disable RTCP stats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtcp stats off - Disable all RTCP stats - -\end{verbatim} - - -\section{rtp debug ip} -\subsection{Summary} -\begin{verbatim} -Enable RTP debugging on IP -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtp debug [ip host[:port]] - Enable dumping of all RTP packets to and from host. - -\end{verbatim} - - -\section{rtp debug} -\subsection{Summary} -\begin{verbatim} -Enable RTP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtp debug [ip host[:port]] - Enable dumping of all RTP packets to and from host. - -\end{verbatim} - - -\section{rtp debug off} -\subsection{Summary} -\begin{verbatim} -Disable RTP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: rtp debug off - Disable all RTP debugging - -\end{verbatim} - - -\section{say load} -\subsection{Summary} -\begin{verbatim} -set/show the say mode -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -say load new|old -\end{verbatim} - - -\section{sip history} -\subsection{Summary} -\begin{verbatim} -Enable SIP history -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip history - Enables recording of SIP dialog history for debugging purposes. -Use 'sip show history' to view the history of a call number. - -\end{verbatim} - - -\section{sip history off} -\subsection{Summary} -\begin{verbatim} -Disable SIP history -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip history off - Disables recording of SIP dialog history for debugging purposes - -\end{verbatim} - - -\section{sip notify} -\subsection{Summary} -\begin{verbatim} -Send a notify packet to a SIP peer -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip notify <type> <peer> [<peer>...] - Send a NOTIFY message to a SIP peer or peers - Message types are defined in sip_notify.conf - -\end{verbatim} - - -\section{sip prune realtime} -\subsection{Summary} -\begin{verbatim} -Prune cached Realtime object(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>] - Prunes object(s) from the cache. - Optional regular expression pattern is used to filter the objects. - -\end{verbatim} - - -\section{sip prune realtime peer} -\subsection{Summary} -\begin{verbatim} -Prune cached Realtime peer(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>] - Prunes object(s) from the cache. - Optional regular expression pattern is used to filter the objects. - -\end{verbatim} - - -\section{sip prune realtime user} -\subsection{Summary} -\begin{verbatim} -Prune cached Realtime user(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>] - Prunes object(s) from the cache. - Optional regular expression pattern is used to filter the objects. - -\end{verbatim} - - -\section{sip reload} -\subsection{Summary} -\begin{verbatim} -Reload SIP configuration -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip reload - Reloads SIP configuration from sip.conf - -\end{verbatim} - - -\section{sip set debug} -\subsection{Summary} -\begin{verbatim} -Enable SIP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>} - sip set debug on - Enables dumping of all SIP messages for debugging purposes - - sip set debug off - Disables dumping of all SIP messages - - sip set debug ip <host[:PORT]> - Enables dumping of SIP messages to and from host. - - sip set debug peer <peername> - Enables dumping of SIP messages to and from peer's IP. - Requires peer to be registered. - -\end{verbatim} - - -\section{sip set debug ip} -\subsection{Summary} -\begin{verbatim} -Enable SIP debugging on IP -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>} - sip set debug on - Enables dumping of all SIP messages for debugging purposes - - sip set debug off - Disables dumping of all SIP messages - - sip set debug ip <host[:PORT]> - Enables dumping of SIP messages to and from host. - - sip set debug peer <peername> - Enables dumping of SIP messages to and from peer's IP. - Requires peer to be registered. - -\end{verbatim} - - -\section{sip set debug off} -\subsection{Summary} -\begin{verbatim} -Disable SIP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip set debug off - Disables dumping of SIP packets for debugging purposes - -\end{verbatim} - - -\section{sip set debug on} -\subsection{Summary} -\begin{verbatim} -Enable SIP debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>} - sip set debug on - Enables dumping of all SIP messages for debugging purposes - - sip set debug off - Disables dumping of all SIP messages - - sip set debug ip <host[:PORT]> - Enables dumping of SIP messages to and from host. - - sip set debug peer <peername> - Enables dumping of SIP messages to and from peer's IP. - Requires peer to be registered. - -\end{verbatim} - - -\section{sip set debug peer} -\subsection{Summary} -\begin{verbatim} -Enable SIP debugging on Peername -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>} - sip set debug on - Enables dumping of all SIP messages for debugging purposes - - sip set debug off - Disables dumping of all SIP messages - - sip set debug ip <host[:PORT]> - Enables dumping of SIP messages to and from host. - - sip set debug peer <peername> - Enables dumping of SIP messages to and from peer's IP. - Requires peer to be registered. - -\end{verbatim} - - -\section{sip show channels} -\subsection{Summary} -\begin{verbatim} -List active SIP channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show channels - Lists all currently active SIP channels. - -\end{verbatim} - - -\section{sip show channel} -\subsection{Summary} -\begin{verbatim} -Show detailed SIP channel info -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show channel <channel> - Provides detailed status on a given SIP channel. - -\end{verbatim} - - -\section{sip show domains} -\subsection{Summary} -\begin{verbatim} -List our local SIP domains. -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show domains - Lists all configured SIP local domains. - Asterisk only responds to SIP messages to local domains. - -\end{verbatim} - - -\section{sip show history} -\subsection{Summary} -\begin{verbatim} -Show SIP dialog history -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show history <channel> - Provides detailed dialog history on a given SIP channel. - -\end{verbatim} - - -\section{sip show inuse} -\subsection{Summary} -\begin{verbatim} -List all inuse/limits -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show inuse [all] - List all SIP users and peers usage counters and limits. - Add option "all" to show all devices, not only those with a limit. - -\end{verbatim} - - -\section{sip show objects} -\subsection{Summary} -\begin{verbatim} -List all SIP object allocations -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show objects - Lists status of known SIP objects - -\end{verbatim} - - -\section{sip show peers} -\subsection{Summary} -\begin{verbatim} -List defined SIP peers -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show peers [like <pattern>] - Lists all known SIP peers. - Optional regular expression pattern is used to filter the peer list. - -\end{verbatim} - - -\section{sip show peer} -\subsection{Summary} -\begin{verbatim} -Show details on specific SIP peer -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show peer <name> [load] - Shows all details on one SIP peer and the current status. - Option "load" forces lookup of peer in realtime storage. - -\end{verbatim} - - -\section{sip show registry} -\subsection{Summary} -\begin{verbatim} -List SIP registration status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show registry - Lists all registration requests and status. - -\end{verbatim} - - -\section{sip show settings} -\subsection{Summary} -\begin{verbatim} -Show SIP global settings -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show settings - Provides detailed list of the configuration of the SIP channel. - -\end{verbatim} - - -\section{sip show subscriptions} -\subsection{Summary} -\begin{verbatim} -List active SIP subscriptions -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show subscriptions - Lists active SIP subscriptions for extension states - -\end{verbatim} - - -\section{sip show users} -\subsection{Summary} -\begin{verbatim} -List defined SIP users -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show users [like <pattern>] - Lists all known SIP users. - Optional regular expression pattern is used to filter the user list. - -\end{verbatim} - - -\section{sip show user} -\subsection{Summary} -\begin{verbatim} -Show details on specific SIP user -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip show user <name> [load] - Shows all details on one SIP user and the current status. - Option "load" forces lookup of peer in realtime storage. - -\end{verbatim} - - -\section{sip unregister} -\subsection{Summary} -\begin{verbatim} -Unregister (force expiration) a SIP peer from the registery - -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sip unregister <peer> - Unregister (force expiration) a SIP peer from the registry - -\end{verbatim} - - -\section{skinny reset} -\subsection{Summary} -\begin{verbatim} -Reset Skinny device(s) -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: skinny reset <DeviceId|all> [restart] - Causes a Skinny device to reset itself, optionally with a full restart - -\end{verbatim} - - -\section{skinny set debug} -\subsection{Summary} -\begin{verbatim} -Enable Skinny debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: skinny set debug - Enables dumping of Skinny packets for debugging purposes - -\end{verbatim} - - -\section{skinny set debug off} -\subsection{Summary} -\begin{verbatim} -Disable Skinny debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: skinny set debug off - Disables dumping of Skinny packets for debugging purposes - -\end{verbatim} - - -\section{skinny show devices} -\subsection{Summary} -\begin{verbatim} -List defined Skinny devices -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: skinny show devices - Lists all devices known to the Skinny subsystem. - -\end{verbatim} - - -\section{skinny show lines} -\subsection{Summary} -\begin{verbatim} -List defined Skinny lines per device -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: skinny show lines - Lists all lines known to the Skinny subsystem. - -\end{verbatim} - - -\section{sla show stations} -\subsection{Summary} -\begin{verbatim} -Show SLA Stations -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sla show stations - This will list all stations defined in sla.conf - -\end{verbatim} - - -\section{sla show trunks} -\subsection{Summary} -\begin{verbatim} -Show SLA Trunks -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: sla show trunks - This will list all trunks defined in sla.conf - -\end{verbatim} - - -\section{soft hangup} -\subsection{Summary} -\begin{verbatim} -Request a hangup on a given channel -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: soft hangup <channel> - Request that a channel be hung up. The hangup takes effect - the next time the driver reads or writes from the channel - -\end{verbatim} - - -\section{stop gracefully} -\subsection{Summary} -\begin{verbatim} -Gracefully shut down Asterisk -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: stop gracefully - Causes Asterisk to not accept new calls, and exit when all - active calls have terminated normally. - -\end{verbatim} - - -\section{stop now} -\subsection{Summary} -\begin{verbatim} -Shut down Asterisk immediately -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: stop now - Shuts down a running Asterisk immediately, hanging up all active calls . - -\end{verbatim} - - -\section{stop when convenient} -\subsection{Summary} -\begin{verbatim} -Shut down Asterisk at empty call volume -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: stop when convenient - Causes Asterisk to perform a shutdown when all active calls have ended. - -\end{verbatim} - - -\section{stun debug} -\subsection{Summary} -\begin{verbatim} -Enable STUN debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: stun debug - Enable STUN (Simple Traversal of UDP through NATs) debugging - -\end{verbatim} - - -\section{stun debug off} -\subsection{Summary} -\begin{verbatim} -Disable STUN debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: stun debug off - Disable STUN debugging - -\end{verbatim} - - -\section{udptl debug} -\subsection{Summary} -\begin{verbatim} -Enable UDPTL debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: udptl debug [ip host[:port]] - Enable dumping of all UDPTL packets to and from host. - -\end{verbatim} - - -\section{udptl debug ip} -\subsection{Summary} -\begin{verbatim} -Enable UDPTL debugging on IP -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: udptl debug [ip host[:port]] - Enable dumping of all UDPTL packets to and from host. - -\end{verbatim} - - -\section{udptl debug off} -\subsection{Summary} -\begin{verbatim} -Disable UDPTL debugging -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: udptl debug off - Disable all UDPTL debugging - -\end{verbatim} - - -\section{ulimit} -\subsection{Summary} -\begin{verbatim} -Set or show process resource limits -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: ulimit {-d|-l|-f|-m|-s|-t|-u|-v|-c|-n} [<num>] - Shows or sets the corresponding resource limit. - -d Process data segment [readonly] - -l Memory lock size [readonly] - -f File size - -m Process resident memory [readonly] - -s Process stack size [readonly] - -t CPU usage [readonly] - -u Child processes - -v Process virtual memory [readonly] - -c Core dump file size - -n Number of file descriptors - -\end{verbatim} - - -\section{voicemail show users} -\subsection{Summary} -\begin{verbatim} -List defined voicemail boxes -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: voicemail show users [for <context>] - Lists all mailboxes currently set up - -\end{verbatim} - - -\section{voicemail show zones} -\subsection{Summary} -\begin{verbatim} -List zone message formats -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: voicemail show zones - Lists zone message formats - -\end{verbatim} - - -\section{zap destroy channel} -\subsection{Summary} -\begin{verbatim} -Destroy a channel -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap destroy channel <chan num> - DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING. Immediately removes a given channel, whether it is in use or not - -\end{verbatim} - - -\section{zap restart} -\subsection{Summary} -\begin{verbatim} -Fully restart zaptel channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap restart - Restarts the zaptel channels: destroys them all and then - re-reads them from zapata.conf. - Note that this will STOP any running CALL on zaptel channels. - -\end{verbatim} - - -\section{zap show cadences} -\subsection{Summary} -\begin{verbatim} -List cadences -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap show cadences - Shows all cadences currently defined - -\end{verbatim} - - -\section{zap show channels} -\subsection{Summary} -\begin{verbatim} -Show active zapata channels -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap show channels [ trunkgroup <trunkgroup> | group <group> | context <context> ] - Shows a list of available channels with optional filtering - <group> must be a number between 0 and 63 - -\end{verbatim} - - -\section{zap show channel} -\subsection{Summary} -\begin{verbatim} -Show information on a channel -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap show channel <chan num> - Detailed information about a given channel - -\end{verbatim} - - -\section{zap show status} -\subsection{Summary} -\begin{verbatim} -Show all Zaptel cards status -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap show status - Shows a list of Zaptel cards with status - -\end{verbatim} - - -\section{zap show version} -\subsection{Summary} -\begin{verbatim} -Show the Zaptel version in use -\end{verbatim} -\subsection{Usage} -\begin{verbatim} -Usage: zap show version - Shows the Zaptel version in use - -\end{verbatim} - - |