After some discussion on the asterisk-dev list, we determined that this approach

for extracting application, function, manager, and agi documentation is the wrong
one to take.  The most severe problem is that the output depends on which modules
are loaded as well as compile time options, which both determine which parts are
available.


git-svn-id: http://svn.digium.com/svn/asterisk/trunk@72986 f38db490-d61c-443f-a65b-d21fe96a405b

1 files changed, 0 insertions, 3505 deletions

diff --git a/doc/tex/ast_cli_commands.tex b/doc/tex/ast_cli_commands.tex
deleted file mode 100644
index e7e58b4e4..000000000
--- a/doc/tex/ast_cli_commands.tex
+++ /dev/null
@@ -1,3505 +0,0 @@
-% This file is automatically generated by the "core dump clidocs" CLI command.  Any manual edits will be lost.
-\section{!}
-\subsection{Summary}
-\begin{verbatim}
-Execute a shell command
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: !<command>
-       Executes a given shell command
-
-\end{verbatim}
-
-
-\section{abort halt}
-\subsection{Summary}
-\begin{verbatim}
-Cancel a running halt
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: abort shutdown
-       Causes Asterisk to abort an executing shutdown or restart, and resume normal
-       call operations.
-
-\end{verbatim}
-
-
-\section{ael debug contexts}
-\subsection{Summary}
-\begin{verbatim}
-Enable AEL contexts debug (does nothing)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{ael debug macros}
-\subsection{Summary}
-\begin{verbatim}
-Enable AEL macros debug (does nothing)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{ael debug read}
-\subsection{Summary}
-\begin{verbatim}
-Enable AEL read debug (does nothing)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{ael debug tokens}
-\subsection{Summary}
-\begin{verbatim}
-Enable AEL tokens debug (does nothing)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{ael nodebug}
-\subsection{Summary}
-\begin{verbatim}
-Disable AEL debug messages
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{ael reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload AEL configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{agent logoff}
-\subsection{Summary}
-\begin{verbatim}
-Sets an agent offline
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agent logoff <channel> [soft]
-       Sets an agent as no longer logged in.
-       If 'soft' is specified, do not hangup existing calls.
-
-\end{verbatim}
-
-
-\section{agent show}
-\subsection{Summary}
-\begin{verbatim}
-Show status of agents
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agent show
-       Provides summary information on agents.
-
-\end{verbatim}
-
-
-\section{agent show online}
-\subsection{Summary}
-\begin{verbatim}
-Show all online agents
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agent show online
-	Provides a list of all online agents.
-
-\end{verbatim}
-
-
-\section{agi debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable AGI debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agi debug
-       Enables dumping of AGI transactions for debugging purposes
-
-\end{verbatim}
-
-
-\section{agi debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable AGI debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agi debug off
-       Disables dumping of AGI transactions for debugging purposes
-
-\end{verbatim}
-
-
-\section{agi dump commanddocs}
-\subsection{Summary}
-\begin{verbatim}
-Dump agi command documentation in LaTeX format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agi dump commanddocs [command]
-       Dump manager action documentation to /tmp/ast_agi_commands.tex.
-
-\end{verbatim}
-
-
-\section{agi dumphtml}
-\subsection{Summary}
-\begin{verbatim}
-Dumps a list of agi commands in html format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agi dumphtml <filename>
-	Dumps the agi command list in html format to given filename
-
-\end{verbatim}
-
-
-\section{agi show}
-\subsection{Summary}
-\begin{verbatim}
-List AGI commands or specific help
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: agi show [topic]
-       When called with a topic as an argument, displays usage
-       information on the given command.  If called without a
-       topic, it provides a list of AGI commands.
-
-\end{verbatim}
-
-
-\section{cdr status}
-\subsection{Summary}
-\begin{verbatim}
-Display the CDR status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: cdr status
-	Displays the Call Detail Record engine system status.
-
-\end{verbatim}
-
-
-\section{console active}
-\subsection{Summary}
-\begin{verbatim}
-Sets/displays active console
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console active [device]
-       If used without a parameter, displays which device is the current
-console.  If a device is specified, the console sound device is changed to
-the device specified.
-
-\end{verbatim}
-
-
-\section{console answer}
-\subsection{Summary}
-\begin{verbatim}
-Answer an incoming console call
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console answer
-       Answers an incoming call on the console (OSS) channel.
-
-\end{verbatim}
-
-
-\section{console autoanswer [on|off]}
-\subsection{Summary}
-\begin{verbatim}
-Sets/displays autoanswer
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console autoanswer [on|off]
-       Enables or disables autoanswer feature.  If used without
-       argument, displays the current on/off status of autoanswer.
-       The default value of autoanswer is in 'oss.conf'.
-
-\end{verbatim}
-
-
-\section{console boost}
-\subsection{Summary}
-\begin{verbatim}
-Sets/displays mic boost in dB
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{console dial}
-\subsection{Summary}
-\begin{verbatim}
-Dial an extension on the console
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console dial [extension[@context]]
-       Dials a given extension (and context if specified)
-
-\end{verbatim}
-
-
-\section{console flash}
-\subsection{Summary}
-\begin{verbatim}
-Flash a call on the console
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console flash
-       Flashes the call currently placed on the console.
-
-\end{verbatim}
-
-
-\section{console hangup}
-\subsection{Summary}
-\begin{verbatim}
-Hangup a call on the console
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console hangup
-       Hangs up any call currently placed on the console.
-
-\end{verbatim}
-
-
-\section{console {mute|unmute}}
-\subsection{Summary}
-\begin{verbatim}
-Disable/Enable mic input
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console {mute|unmute}
-       Mute/unmute the microphone.
-
-\end{verbatim}
-
-
-\section{console send text}
-\subsection{Summary}
-\begin{verbatim}
-Send text to the remote device
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console send text <message>
-       Sends a text message for display on the remote terminal.
-
-\end{verbatim}
-
-
-\section{console transfer}
-\subsection{Summary}
-\begin{verbatim}
-Transfer a call to a different extension
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: console transfer <extension>[@context]
-       Transfers the currently connected call to the given extension (and
-context if specified)
-
-\end{verbatim}
-
-
-\section{core clear profile}
-\subsection{Summary}
-\begin{verbatim}
-Clear profiling info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{core dump appdocs}
-\subsection{Summary}
-\begin{verbatim}
-Dump application documentation in LaTeX format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core dump appdocs [application]
-       Dump Application documentation to /tmp/ast_appdocs.tex.
-
-\end{verbatim}
-
-
-\section{core dump clidocs}
-\subsection{Summary}
-\begin{verbatim}
-Dump CLI command documentation in LaTeX format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core dump clidocs
-       Dump CLI command documentation to /tmp/ast_cli_commands.tex.
-
-\end{verbatim}
-
-
-\section{core dump funcdocs}
-\subsection{Summary}
-\begin{verbatim}
-Dump function documentation in LaTeX format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core dump funcdocs [function]
-       Dump Application documentation to /tmp/ast_funcdocs.tex.
-
-\end{verbatim}
-
-
-\section{core set debug channel}
-\subsection{Summary}
-\begin{verbatim}
-Enable/disable debugging on a channel
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core set debug channel <all|channel> [off]
-       Enables/disables debugging on all or on a specific channel.
-
-\end{verbatim}
-
-
-\section{core set {debug|verbose} [off|atleast]}
-\subsection{Summary}
-\begin{verbatim}
-Set level of debug/verbose chattiness
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core set {debug|verbose} [atleast] <level>
-       core set {debug|verbose} off
-       Sets level of debug or verbose messages to be displayed.
-	0 or off means no messages should be displayed.
-	Equivalent to -d[d[...]] or -v[v[v...]] on startup
-
-\end{verbatim}
-
-
-\section{core set global}
-\subsection{Summary}
-\begin{verbatim}
-Set global dialplan variable
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core set global <name> <value>
-       Set global dialplan variable <name> to <value>
-
-\end{verbatim}
-
-
-\section{core show applications}
-\subsection{Summary}
-\begin{verbatim}
-Shows registered dialplan applications
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show applications [{like|describing} <text>]
-       List applications which are currently available.
-       If 'like', <text> will be a substring of the app name
-       If 'describing', <text> will be a substring of the description
-
-\end{verbatim}
-
-
-\section{core show application}
-\subsection{Summary}
-\begin{verbatim}
-Describe a specific dialplan application
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show application <application> [<application> [<application> [...]]]
-       Describes a particular application.
-
-\end{verbatim}
-
-
-\section{core show channels [concise|verbose|count]}
-\subsection{Summary}
-\begin{verbatim}
-Display information on channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show channels [concise|verbose|count]
-       Lists currently defined channels and some information about them. If
-       'concise' is specified, the format is abridged and in a more easily
-       machine parsable format. If 'verbose' is specified, the output includes
-       more and longer fields. If 'count' is specified only the channel and call
-       count is output.
-
-\end{verbatim}
-
-
-\section{core show channel}
-\subsection{Summary}
-\begin{verbatim}
-Display information on a specific channel
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show channel <channel>
-       Shows lots of information about the specified channel.
-
-\end{verbatim}
-
-
-\section{core show channeltypes}
-\subsection{Summary}
-\begin{verbatim}
-List available channel types
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show channeltypes
-       Lists available channel types registered in your Asterisk server.
-
-\end{verbatim}
-
-
-\section{core show channeltype}
-\subsection{Summary}
-\begin{verbatim}
-Give more details on that channel type
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show channeltype <name>
-	Show details about the specified channel type, <name>.
-
-\end{verbatim}
-
-
-\section{core show codecs}
-\subsection{Summary}
-\begin{verbatim}
-Displays a list of codecs
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show codecs [audio|video|image]
-       Displays codec mapping
-
-\end{verbatim}
-
-
-\section{core show codecs audio}
-\subsection{Summary}
-\begin{verbatim}
-Displays a list of audio codecs
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show codecs [audio|video|image]
-       Displays codec mapping
-
-\end{verbatim}
-
-
-\section{core show codecs image}
-\subsection{Summary}
-\begin{verbatim}
-Displays a list of image codecs
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show codecs [audio|video|image]
-       Displays codec mapping
-
-\end{verbatim}
-
-
-\section{core show codecs video}
-\subsection{Summary}
-\begin{verbatim}
-Displays a list of video codecs
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show codecs [audio|video|image]
-       Displays codec mapping
-
-\end{verbatim}
-
-
-\section{core show codec}
-\subsection{Summary}
-\begin{verbatim}
-Shows a specific codec
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show codec <number>
-       Displays codec mapping
-
-\end{verbatim}
-
-
-\section{core show config mappings}
-\subsection{Summary}
-\begin{verbatim}
-Display config mappings (file names to config engines)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show config mappings
-	Shows the filenames to config engines.
-
-\end{verbatim}
-
-
-\section{core show file formats}
-\subsection{Summary}
-\begin{verbatim}
-Displays file formats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show file formats
-       Displays currently registered file formats (if any)
-
-\end{verbatim}
-
-
-\section{core show file version}
-\subsection{Summary}
-\begin{verbatim}
-List versions of files used to build Asterisk
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show file version [like <pattern>]
-       Lists the revision numbers of the files used to build this copy of Asterisk.
-       Optional regular expression pattern is used to filter the file list.
-
-\end{verbatim}
-
-
-\section{core show functions}
-\subsection{Summary}
-\begin{verbatim}
-Shows registered dialplan functions
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show functions [like <text>]
-       List builtin functions, optionally only those matching a given string
-
-\end{verbatim}
-
-
-\section{core show function}
-\subsection{Summary}
-\begin{verbatim}
-Describe a specific dialplan function
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show function <function>
-       Describe a particular dialplan function.
-
-\end{verbatim}
-
-
-\section{core show globals}
-\subsection{Summary}
-\begin{verbatim}
-Show global dialplan variables
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show globals
-       List current global dialplan variables and their values
-
-\end{verbatim}
-
-
-\section{core show hints}
-\subsection{Summary}
-\begin{verbatim}
-Show dialplan hints
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show hints
-       List registered hints
-
-\end{verbatim}
-
-
-\section{core show image formats}
-\subsection{Summary}
-\begin{verbatim}
-Displays image formats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show image formats
-       displays currently registered image formats (if any)
-
-\end{verbatim}
-
-
-\section{core show license}
-\subsection{Summary}
-\begin{verbatim}
-Show the license(s) for this copy of Asterisk
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show license
-       Shows the license(s) for this copy of Asterisk.
-
-\end{verbatim}
-
-
-\section{core show profile}
-\subsection{Summary}
-\begin{verbatim}
-Display profiling info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{core show settings}
-\subsection{Summary}
-\begin{verbatim}
-Show some core settings
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-(null)
-\end{verbatim}
-
-
-\section{core show switches}
-\subsection{Summary}
-\begin{verbatim}
-Show alternative switches
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show switches
-       List registered switches
-
-\end{verbatim}
-
-
-\section{core show sysinfo}
-\subsection{Summary}
-\begin{verbatim}
-Show System Information
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show sysinfo
-       List current system information.
-
-\end{verbatim}
-
-
-\section{core show threads}
-\subsection{Summary}
-\begin{verbatim}
-Show running threads
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show threads
-       List threads currently active in the system.
-
-\end{verbatim}
-
-
-\section{core show translation}
-\subsection{Summary}
-\begin{verbatim}
-Display translation matrix
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show translation [recalc] [<recalc seconds>]
-       Displays known codec translators and the cost associated
-with each conversion.  If the argument 'recalc' is supplied along
-with optional number of seconds to test a new test will be performed
-as the chart is being displayed.
-
-\end{verbatim}
-
-
-\section{core show uptime [seconds]}
-\subsection{Summary}
-\begin{verbatim}
-Show uptime information
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show uptime [seconds]
-       Shows Asterisk uptime information.
-       The seconds word returns the uptime in seconds only.
-
-\end{verbatim}
-
-
-\section{core show version}
-\subsection{Summary}
-\begin{verbatim}
-Display version info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show version
-       Shows Asterisk version information.
-
-\end{verbatim}
-
-
-\section{core show warranty}
-\subsection{Summary}
-\begin{verbatim}
-Show the warranty (if any) for this copy of Asterisk
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show warranty
-       Shows the warranty (if any) for this copy of Asterisk.
-
-\end{verbatim}
-
-
-\section{database del}
-\subsection{Summary}
-\begin{verbatim}
-Removes database key/value
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database del <family> <key>
-       Deletes an entry in the Asterisk database for a given
-family and key.
-
-\end{verbatim}
-
-
-\section{database deltree}
-\subsection{Summary}
-\begin{verbatim}
-Removes database keytree/values
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database deltree <family> [keytree]
-       Deletes a family or specific keytree within a family
-in the Asterisk database.
-
-\end{verbatim}
-
-
-\section{database get}
-\subsection{Summary}
-\begin{verbatim}
-Gets database value
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database get <family> <key>
-       Retrieves an entry in the Asterisk database for a given
-family and key.
-
-\end{verbatim}
-
-
-\section{database put}
-\subsection{Summary}
-\begin{verbatim}
-Adds/updates database value
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database put <family> <key> <value>
-       Adds or updates an entry in the Asterisk database for
-a given family, key, and value.
-
-\end{verbatim}
-
-
-\section{database show}
-\subsection{Summary}
-\begin{verbatim}
-Shows database contents
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database show [family [keytree]]
-       Shows Asterisk database contents, optionally restricted
-to a given family, or family and keytree.
-
-\end{verbatim}
-
-
-\section{database showkey}
-\subsection{Summary}
-\begin{verbatim}
-Shows database contents
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: database showkey <keytree>
-       Shows Asterisk database contents, restricted to a given key.
-
-\end{verbatim}
-
-
-\section{dialplan add extension}
-\subsection{Summary}
-\begin{verbatim}
-Add new extension into context
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan add extension <exten>,<priority>,<app>,<app-data>
-       into <context> [replace]
-
-       This command will add new extension into <context>. If there is an
-       existence of extension with the same priority and last 'replace'
-       arguments is given here we simply replace this extension.
-
-Example: dialplan add extension 6123,1,Dial,IAX/216.207.245.56/6123 into local
-         Now, you can dial 6123 and talk to Markster :)
-
-\end{verbatim}
-
-
-\section{dialplan add ignorepat}
-\subsection{Summary}
-\begin{verbatim}
-Add new ignore pattern
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan add ignorepat <pattern> into <context>
-       This command adds a new ignore pattern into context <context>
-
-Example: dialplan add ignorepat _3XX into local
-
-\end{verbatim}
-
-
-\section{dialplan add include}
-\subsection{Summary}
-\begin{verbatim}
-Include context in other context
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan add include <context> into <context>
-       Include a context in another context.
-
-\end{verbatim}
-
-
-\section{dialplan reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload extensions and *only* extensions
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan reload
-       reload extensions.conf without reloading any other modules
-       This command does not delete global variables unless
-       clearglobalvars is set to yes in extensions.conf
-
-\end{verbatim}
-
-
-\section{dialplan remove extension}
-\subsection{Summary}
-\begin{verbatim}
-Remove a specified extension
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan remove extension exten@context [priority]
-       Remove an extension from a given context. If a priority
-       is given, only that specific priority from the given extension
-       will be removed.
-
-\end{verbatim}
-
-
-\section{dialplan remove ignorepat}
-\subsection{Summary}
-\begin{verbatim}
-Remove ignore pattern from context
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan remove ignorepat <pattern> from <context>
-       This command removes an ignore pattern from context <context>
-
-Example: dialplan remove ignorepat _3XX from local
-
-\end{verbatim}
-
-
-\section{dialplan remove include}
-\subsection{Summary}
-\begin{verbatim}
-Remove a specified include from context
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan remove include <context> from <context>
-       Remove an included context from another context.
-
-\end{verbatim}
-
-
-\section{dialplan save}
-\subsection{Summary}
-\begin{verbatim}
-Save dialplan
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dialplan save [/path/to/extension/file]
-       Save dialplan created by pbx_config module.
-
-Example: dialplan save                 (/etc/asterisk/extensions.conf)
-         dialplan save /home/markster  (/home/markster/extensions.conf)
-
-\end{verbatim}
-
-
-\section{dialplan show}
-\subsection{Summary}
-\begin{verbatim}
-Show dialplan
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core show dialplan [exten@][context]
-       Show dialplan
-
-\end{verbatim}
-
-
-\section{dnsmgr reload}
-\subsection{Summary}
-\begin{verbatim}
-Reloads the DNS manager configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dnsmgr reload
-       Reloads the DNS manager configuration.
-
-\end{verbatim}
-
-
-\section{dnsmgr status}
-\subsection{Summary}
-\begin{verbatim}
-Display the DNS manager status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dnsmgr status
-       Displays the DNS manager status.
-
-\end{verbatim}
-
-
-\section{dundi debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable DUNDi debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi debug
-       Enables dumping of DUNDi packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{dundi flush}
-\subsection{Summary}
-\begin{verbatim}
-Flush DUNDi cache
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi flush [stats]
-       Flushes DUNDi answer cache, used primarily for debug.  If
-'stats' is present, clears timer statistics instead of normal
-operation.
-
-\end{verbatim}
-
-
-\section{dundi lookup}
-\subsection{Summary}
-\begin{verbatim}
-Lookup a number in DUNDi
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi lookup <number>[@context] [bypass]
-       Lookup the given number within the given DUNDi context
-(or e164 if none is specified).  Bypasses cache if 'bypass'
-keyword is specified.
-
-\end{verbatim}
-
-
-\section{dundi no debug}
-\subsection{Summary}
-\begin{verbatim}
-Disable DUNDi debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi no debug
-       Disables dumping of DUNDi packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{dundi no store history}
-\subsection{Summary}
-\begin{verbatim}
-Disable DUNDi historic records
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi no store history
-       Disables storing of DUNDi requests and times for debugging
-purposes
-
-\end{verbatim}
-
-
-\section{dundi precache}
-\subsection{Summary}
-\begin{verbatim}
-Precache a number in DUNDi
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi precache <number>[@context]
-       Lookup the given number within the given DUNDi context
-(or e164 if none is specified) and precaches the results to any
-upstream DUNDi push servers.
-
-\end{verbatim}
-
-
-\section{dundi query}
-\subsection{Summary}
-\begin{verbatim}
-Query a DUNDi EID
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi query <entity>[@context]
-       Attempts to retrieve contact information for a specific
-DUNDi entity identifier (EID) within a given DUNDi context (or
-e164 if none is specified).
-
-\end{verbatim}
-
-
-\section{dundi show entityid}
-\subsection{Summary}
-\begin{verbatim}
-Display Global Entity ID
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show entityid
-       Displays the global entityid for this host.
-
-\end{verbatim}
-
-
-\section{dundi show mappings}
-\subsection{Summary}
-\begin{verbatim}
-Show DUNDi mappings
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show mappings
-       Lists all known DUNDi mappings.
-
-\end{verbatim}
-
-
-\section{dundi show peers}
-\subsection{Summary}
-\begin{verbatim}
-Show defined DUNDi peers
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show peers
-       Lists all known DUNDi peers.
-
-\end{verbatim}
-
-
-\section{dundi show peer}
-\subsection{Summary}
-\begin{verbatim}
-Show info on a specific DUNDi peer
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show peer [peer]
-       Provide a detailed description of a specifid DUNDi peer.
-
-\end{verbatim}
-
-
-\section{dundi show precache}
-\subsection{Summary}
-\begin{verbatim}
-Show DUNDi precache
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show precache
-       Lists all known DUNDi scheduled precache updates.
-
-\end{verbatim}
-
-
-\section{dundi show requests}
-\subsection{Summary}
-\begin{verbatim}
-Show DUNDi requests
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show requests
-       Lists all known pending DUNDi requests.
-
-\end{verbatim}
-
-
-\section{dundi show trans}
-\subsection{Summary}
-\begin{verbatim}
-Show active DUNDi transactions
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi show trans
-       Lists all known DUNDi transactions.
-
-\end{verbatim}
-
-
-\section{dundi store history}
-\subsection{Summary}
-\begin{verbatim}
-Enable DUNDi historic records
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: dundi store history
-       Enables storing of DUNDi requests and times for debugging
-purposes
-
-\end{verbatim}
-
-
-\section{feature show}
-\subsection{Summary}
-\begin{verbatim}
-Lists configured features
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: feature list
-       Lists currently configured features.
-
-\end{verbatim}
-
-
-\section{file convert}
-\subsection{Summary}
-\begin{verbatim}
-Convert audio file
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: file convert <file_in> <file_out>
-    Convert from file_in to file_out. If an absolute path is not given, the
-default Asterisk sounds directory will be used.
-
-Example:
-    file convert tt-weasels.gsm tt-weasels.ulaw
-
-\end{verbatim}
-
-
-\section{funcdevstate list}
-\subsection{Summary}
-\begin{verbatim}
-List currently known custom device states
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: funcdevstate list
-       List all custom device states that have been set by using
-       the DEVSTATE dialplan function.
-
-\end{verbatim}
-
-
-\section{group show channels}
-\subsection{Summary}
-\begin{verbatim}
-Display active channels with group(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: group show channels [pattern]
-       Lists all currently active channels with channel group(s) specified.
-       Optional regular expression pattern is matched to group names for each
-       channel.
-
-\end{verbatim}
-
-
-\section{gtalk reload}
-\subsection{Summary}
-\begin{verbatim}
-Enable Jabber debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: gtalk reload
-       Reload gtalk channel driver.
-
-\end{verbatim}
-
-
-\section{gtalk show channels}
-\subsection{Summary}
-\begin{verbatim}
-Show GoogleTalk Channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: gtalk show channels
-       Shows current state of the Gtalk channels.
-
-\end{verbatim}
-
-
-\section{h323 cycle gk}
-\subsection{Summary}
-\begin{verbatim}
-Manually re-register with the Gatekeper
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 gk cycle
-       Manually re-register with the Gatekeper (Currently Disabled)
-
-\end{verbatim}
-
-
-\section{h323 hangup}
-\subsection{Summary}
-\begin{verbatim}
-Manually try to hang up a call
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 hangup <token>
-       Manually try to hang up call identified by <token>
-
-\end{verbatim}
-
-
-\section{h323 reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload H.323 configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 reload
-       Reloads H.323 configuration from h323.conf
-
-\end{verbatim}
-
-
-\section{h323 set debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable H.323 debug
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 debug
-       Enables H.323 debug output
-
-\end{verbatim}
-
-
-\section{h323 set debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable H.323 debug
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 no debug
-       Disables H.323 debug output
-
-\end{verbatim}
-
-
-\section{h323 set trace}
-\subsection{Summary}
-\begin{verbatim}
-Enable H.323 Stack Tracing
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 trace <level num>
-       Enables H.323 stack tracing for debugging purposes
-
-\end{verbatim}
-
-
-\section{h323 set trace off}
-\subsection{Summary}
-\begin{verbatim}
-Disable H.323 Stack Tracing
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 no trace
-       Disables H.323 stack tracing for debugging purposes
-
-\end{verbatim}
-
-
-\section{h323 show tokens}
-\subsection{Summary}
-\begin{verbatim}
-Show all active call tokens
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: h323 show tokens
-       Print out all active call tokens
-
-\end{verbatim}
-
-
-\section{help}
-\subsection{Summary}
-\begin{verbatim}
-Display help list, or specific help on a command
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: help [topic]
-       When called with a topic as an argument, displays usage
-       information on the given command. If called without a
-       topic, it provides a list of commands.
-
-\end{verbatim}
-
-
-\section{http show status}
-\subsection{Summary}
-\begin{verbatim}
-Display HTTP server status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: http show status
-       Lists status of internal HTTP engine
-
-\end{verbatim}
-
-
-\section{iax2 provision}
-\subsection{Summary}
-\begin{verbatim}
-Provision an IAX device
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 provision <host> <template> [forced]
-       Provisions the given peer or IP address using a template
-       matching either 'template' or '*' if the template is not
-       found.  If 'forced' is specified, even empty provisioning
-       fields will be provisioned as empty fields.
-
-\end{verbatim}
-
-
-\section{iax2 prune realtime}
-\subsection{Summary}
-\begin{verbatim}
-Prune a cached realtime lookup
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 prune realtime [<peername>|all]
-       Prunes object(s) from the cache
-
-\end{verbatim}
-
-
-\section{iax2 reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload IAX configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 reload
-       Reloads IAX configuration from iax.conf
-
-\end{verbatim}
-
-
-\section{iax2 set debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable IAX debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug
-       Enables dumping of IAX packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{iax2 set debug jb}
-\subsection{Summary}
-\begin{verbatim}
-Enable IAX jitterbuffer debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug jb
-       Enables jitterbuffer debugging information
-
-\end{verbatim}
-
-
-\section{iax2 set debug jb off}
-\subsection{Summary}
-\begin{verbatim}
-Disable IAX jitterbuffer debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug jb off
-       Disables jitterbuffer debugging information
-
-\end{verbatim}
-
-
-\section{iax2 set debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable IAX debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug off
-       Disables dumping of IAX packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{iax2 set debug trunk}
-\subsection{Summary}
-\begin{verbatim}
-Enable IAX trunk debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug trunk
-       Requests current status of IAX trunking
-
-\end{verbatim}
-
-
-\section{iax2 set debug trunk off}
-\subsection{Summary}
-\begin{verbatim}
-Disable IAX trunk debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set debug trunk off
-       Requests current status of IAX trunking
-
-\end{verbatim}
-
-
-\section{iax2 set mtu}
-\subsection{Summary}
-\begin{verbatim}
-Set the IAX systemwide trunking MTU
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 set mtu <value>
-       Set the system-wide IAX IP mtu to <value> bytes net or zero to disable.
-       Disabling means that the operating system must handle fragmentation of UDP packets
-       when the IAX2 trunk packet exceeds the UDP payload size.
-       This is substantially below the IP mtu. Try 1240 on ethernets.
-       Must be 172 or greater for G.711 samples.
-
-\end{verbatim}
-
-
-\section{iax2 show cache}
-\subsection{Summary}
-\begin{verbatim}
-Display IAX cached dialplan
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show cache
-       Display currently cached IAX Dialplan results.
-
-\end{verbatim}
-
-
-\section{iax2 show channels}
-\subsection{Summary}
-\begin{verbatim}
-List active IAX channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show channels
-       Lists all currently active IAX channels.
-
-\end{verbatim}
-
-
-\section{iax2 show firmware}
-\subsection{Summary}
-\begin{verbatim}
-List available IAX firmwares
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show firmware
-       Lists all known IAX firmware images.
-
-\end{verbatim}
-
-
-\section{iax2 show netstats}
-\subsection{Summary}
-\begin{verbatim}
-List active IAX channel netstats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show netstats
-       Lists network status for all currently active IAX channels.
-
-\end{verbatim}
-
-
-\section{iax2 show peers}
-\subsection{Summary}
-\begin{verbatim}
-List defined IAX peers
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show peers [registered] [like <pattern>]
-       Lists all known IAX2 peers.
-       Optional 'registered' argument lists only peers with known addresses.
-       Optional regular expression pattern is used to filter the peer list.
-
-\end{verbatim}
-
-
-\section{iax2 show peer}
-\subsection{Summary}
-\begin{verbatim}
-Show details on specific IAX peer
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show peer <name>
-       Display details on specific IAX peer
-
-\end{verbatim}
-
-
-\section{iax2 show provisioning}
-\subsection{Summary}
-\begin{verbatim}
-Display iax provisioning
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax list provisioning [template]
-       Lists all known IAX provisioning templates or a
-       specific one if specified.
-
-\end{verbatim}
-
-
-\section{iax2 show registry}
-\subsection{Summary}
-\begin{verbatim}
-Display IAX registration status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show registry
-       Lists all registration requests and status.
-
-\end{verbatim}
-
-
-\section{iax2 show stats}
-\subsection{Summary}
-\begin{verbatim}
-Display IAX statistics
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show stats
-       Display statistics on IAX channel driver.
-
-\end{verbatim}
-
-
-\section{iax2 show threads}
-\subsection{Summary}
-\begin{verbatim}
-Display IAX helper thread info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show threads
-       Lists status of IAX helper threads
-
-\end{verbatim}
-
-
-\section{iax2 show users}
-\subsection{Summary}
-\begin{verbatim}
-List defined IAX users
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 show users [like <pattern>]
-       Lists all known IAX2 users.
-       Optional regular expression pattern is used to filter the user list.
-
-\end{verbatim}
-
-
-\section{iax2 test losspct}
-\subsection{Summary}
-\begin{verbatim}
-Set IAX2 incoming frame loss percentage
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 test losspct <percentage>
-       For testing, throws away <percentage> percent of incoming packets
-
-\end{verbatim}
-
-
-\section{iax2 unregister}
-\subsection{Summary}
-\begin{verbatim}
-Unregister (force expiration) an IAX2 peer from the registry
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: iax2 unregister <peername>
-       Unregister (force expiration) an IAX2 peer from the registry.
-
-\end{verbatim}
-
-
-\section{indication add}
-\subsection{Summary}
-\begin{verbatim}
-Add the given indication to the country
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: indication add <country> <indication> "<tonelist>"
-       Add the given indication to the country.
-
-\end{verbatim}
-
-
-\section{indication remove}
-\subsection{Summary}
-\begin{verbatim}
-Remove the given indication from the country
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: indication remove <country> <indication>
-       Remove the given indication from the country.
-
-\end{verbatim}
-
-
-\section{indication show}
-\subsection{Summary}
-\begin{verbatim}
-Display a list of all countries/indications
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: indication show [<country> ...]
-       Display either a condensed for of all country/indications, or the
-       indications for the specified countries.
-
-\end{verbatim}
-
-
-\section{jabber debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable Jabber debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: jabber debug
-       Enables dumping of Jabber packets for debugging purposes.
-
-\end{verbatim}
-
-
-\section{jabber debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable Jabber debug
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: jabber debug off
-       Disables dumping of Jabber packets for debugging purposes.
-
-\end{verbatim}
-
-
-\section{jabber reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload Jabber configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: jabber reload
-       Enables reloading of Jabber module.
-
-\end{verbatim}
-
-
-\section{jabber show connected}
-\subsection{Summary}
-\begin{verbatim}
-Show state of clients and components
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: jabber debug
-       Enables dumping of Jabber packets for debugging purposes.
-
-\end{verbatim}
-
-
-\section{jabber test}
-\subsection{Summary}
-\begin{verbatim}
-Shows roster, but is generally used for mog's debugging.
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: jabber test [client]
-       Sends test message for debugging purposes.  A specific client
-       as configured in jabber.conf can be optionally specified.
-
-\end{verbatim}
-
-
-\section{keys init}
-\subsection{Summary}
-\begin{verbatim}
-Initialize RSA key passcodes
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: keys init
-       Initializes private keys (by reading in pass code from the user)
-
-\end{verbatim}
-
-
-\section{keys show}
-\subsection{Summary}
-\begin{verbatim}
-Displays RSA key information
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: keys show
-       Displays information about RSA keys known by Asterisk
-
-\end{verbatim}
-
-
-\section{local show channels}
-\subsection{Summary}
-\begin{verbatim}
-List status of local channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: local show channels
-       Provides summary information on active local proxy channels.
-
-\end{verbatim}
-
-
-\section{logger mute}
-\subsection{Summary}
-\begin{verbatim}
-Toggle logging output to a console
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: logger mute
-       Disables logging output to the current console, making it possible to
-       gather information without being disturbed by scrolling lines.
-
-\end{verbatim}
-
-
-\section{logger reload}
-\subsection{Summary}
-\begin{verbatim}
-Reopens the log files
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: logger reload
-       Reloads the logger subsystem state.  Use after restarting syslogd(8) if you are using syslog logging.
-
-\end{verbatim}
-
-
-\section{logger rotate}
-\subsection{Summary}
-\begin{verbatim}
-Rotates and reopens the log files
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: logger rotate
-       Rotates and Reopens the log files.
-
-\end{verbatim}
-
-
-\section{logger show channels}
-\subsection{Summary}
-\begin{verbatim}
-List configured log channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: logger show channels
-       List configured logger channels.
-
-\end{verbatim}
-
-
-\section{manager debug}
-\subsection{Summary}
-\begin{verbatim}
-Show, enable, disable debugging of the manager code
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager debug [on|off]
-	Show, enable, disable debugging of the manager code.
-
-\end{verbatim}
-
-
-\section{manager dump actiondocs}
-\subsection{Summary}
-\begin{verbatim}
-Dump manager action documentation in LaTeX format
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager dump actiondocs [action]
-       Dump manager action documentation to /tmp/ast_manager_actiondocs.tex.
-
-\end{verbatim}
-
-
-\section{manager show command}
-\subsection{Summary}
-\begin{verbatim}
-Show a manager interface command
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager show command <actionname>
-	Shows the detailed description for a specific Asterisk manager interface command.
-
-\end{verbatim}
-
-
-\section{manager show commands}
-\subsection{Summary}
-\begin{verbatim}
-List manager interface commands
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager show commands
-	Prints a listing of all the available Asterisk manager interface commands.
-
-\end{verbatim}
-
-
-\section{manager show connected}
-\subsection{Summary}
-\begin{verbatim}
-List connected manager interface users
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager show connected
-	Prints a listing of the users that are currently connected to the
-Asterisk manager interface.
-
-\end{verbatim}
-
-
-\section{manager show eventq}
-\subsection{Summary}
-\begin{verbatim}
-List manager interface queued events
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager show eventq
-	Prints a listing of all events pending in the Asterisk manger
-event queue.
-
-\end{verbatim}
-
-
-\section{manager show users}
-\subsection{Summary}
-\begin{verbatim}
-List configured manager users
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: manager show users
-       Prints a listing of all managers that are currently configured on that
- system.
-
-\end{verbatim}
-
-
-\section{manager show user}
-\subsection{Summary}
-\begin{verbatim}
-Display information on a specific manager user
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
- Usage: manager show user <user>
-        Display all information related to the manager user specified.
-
-\end{verbatim}
-
-
-\section{meetme}
-\subsection{Summary}
-\begin{verbatim}
-Execute a command on a conference or conferee
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: meetme (un)lock|(un)mute|kick|list [concise] <confno> <usernumber>
-       Executes a command for the conference or on a conferee
-
-\end{verbatim}
-
-
-\section{memory show allocations}
-\subsection{Summary}
-\begin{verbatim}
-Display outstanding memory allocations
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: memory show allocations [<file>]
-       Dumps a list of all segments of allocated memory, optionally
-limited to those from a specific file
-
-\end{verbatim}
-
-
-\section{memory show summary}
-\subsection{Summary}
-\begin{verbatim}
-Summarize outstanding memory allocations
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: memory show summary [<file>]
-       Summarizes heap memory allocations by file, or optionally
-by function, if a file is specified
-
-\end{verbatim}
-
-
-\section{mgcp audit endpoint}
-\subsection{Summary}
-\begin{verbatim}
-Audit specified MGCP endpoint
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: mgcp audit endpoint <endpointid>
-       Lists the capabilities of an endpoint in the MGCP (Media Gateway Control Protocol) subsystem.
-       mgcp debug MUST be on to see the results of this command.
-
-\end{verbatim}
-
-
-\section{mgcp reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload MGCP configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: mgcp reload
-       Reloads MGCP configuration from mgcp.conf
-       Deprecated:  please use 'reload chan_mgcp.so' instead.
-
-\end{verbatim}
-
-
-\section{mgcp set debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable MGCP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: mgcp set debug
-       Enables dumping of MGCP packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{mgcp set debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable MGCP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: mgcp set debug off
-       Disables dumping of MGCP packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{mgcp show endpoints}
-\subsection{Summary}
-\begin{verbatim}
-List defined MGCP endpoints
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: mgcp show endpoints
-       Lists all endpoints known to the MGCP (Media Gateway Control Protocol) subsystem.
-
-\end{verbatim}
-
-
-\section{minivm list accounts}
-\subsection{Summary}
-\begin{verbatim}
-List defined mini-voicemail boxes
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm list accounts
-       Lists all mailboxes currently set up
-
-\end{verbatim}
-
-
-\section{minivm list templates}
-\subsection{Summary}
-\begin{verbatim}
-List message templates
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm list templates
-       Lists message templates for e-mail, paging and IM
-
-\end{verbatim}
-
-
-\section{minivm list zones}
-\subsection{Summary}
-\begin{verbatim}
-List zone message formats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm list zones
-       Lists zone message formats
-
-\end{verbatim}
-
-
-\section{minivm reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload Mini-voicemail configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm reload
-       Reload mini-voicemail configuration and reset statistics
-
-\end{verbatim}
-
-
-\section{minivm show settings}
-\subsection{Summary}
-\begin{verbatim}
-Show mini-voicemail general settings
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm show settings
-       Display Mini-Voicemail general settings
-
-\end{verbatim}
-
-
-\section{minivm show stats}
-\subsection{Summary}
-\begin{verbatim}
-Show some mini-voicemail statistics
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: minivm show stats
-       Display Mini-Voicemail counters
-
-\end{verbatim}
-
-
-\section{mixmonitor}
-\subsection{Summary}
-\begin{verbatim}
-Execute a MixMonitor command.
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-mixmonitor <start|stop> <chan_name> [args]
-
-The optional arguments are passed to the
-MixMonitor application when the 'start' command is used.
-
-\end{verbatim}
-
-
-\section{module load}
-\subsection{Summary}
-\begin{verbatim}
-Load a module by name
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: module load <module name>
-       Loads the specified module into Asterisk.
-
-\end{verbatim}
-
-
-\section{module reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: module reload [module ...]
-       Reloads configuration files for all listed modules which support
-       reloading, or for all supported modules if none are listed.
-
-\end{verbatim}
-
-
-\section{module show [like]}
-\subsection{Summary}
-\begin{verbatim}
-List modules and info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: module show [like keyword]
-       Shows Asterisk modules currently in use, and usage statistics.
-
-\end{verbatim}
-
-
-\section{module unload}
-\subsection{Summary}
-\begin{verbatim}
-Unload a module by name
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: module unload [-f|-h] <module_1> [<module_2> ... ]
-       Unloads the specified module from Asterisk. The -f
-       option causes the module to be unloaded even if it is
-       in use (may cause a crash) and the -h module causes the
-       module to be unloaded even if the module says it cannot, 
-       which almost always will cause a crash.
-
-\end{verbatim}
-
-
-\section{moh reload}
-\subsection{Summary}
-\begin{verbatim}
-Music On Hold
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Music On Hold
-\end{verbatim}
-
-
-\section{moh show classes}
-\subsection{Summary}
-\begin{verbatim}
-List MOH classes
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Lists all MOH classes
-\end{verbatim}
-
-
-\section{moh show files}
-\subsection{Summary}
-\begin{verbatim}
-List MOH file-based classes
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Lists all loaded file-based MOH classes and their files
-\end{verbatim}
-
-
-\section{no debug channel}
-\subsection{Summary}
-\begin{verbatim}
-Disable debugging on channel(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: core set debug channel <all|channel> [off]
-       Enables/disables debugging on all or on a specific channel.
-
-\end{verbatim}
-
-
-\section{odbc show}
-\subsection{Summary}
-\begin{verbatim}
-List ODBC DSN(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: odbc show [<class>]
-       List settings of a particular ODBC class.
-       or, if not specified, all classes.
-
-\end{verbatim}
-
-
-\section{originate}
-\subsection{Summary}
-\begin{verbatim}
-Originate a call
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-  There are two ways to use this command. A call can be originated between a
-channel and a specific application, or between a channel and an extension in
-the dialplan. This is similar to call files or the manager originate action.
-Calls originated with this command are given a timeout of 30 seconds.
-
-Usage1: originate <tech/data> application <appname> [appdata]
-  This will originate a call between the specified channel tech/data and the
-given application. Arguments to the application are optional. If the given
-arguments to the application include spaces, all of the arguments to the
-application need to be placed in quotation marks.
-
-Usage2: originate <tech/data> extension [exten@][context]
-  This will originate a call between the specified channel tech/data and the
-given extension. If no context is specified, the 'default' context will be
-used. If no extension is given, the 's' extension will be used.
-
-\end{verbatim}
-
-
-\section{parkedcalls show}
-\subsection{Summary}
-\begin{verbatim}
-List currently parked calls
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: parkedcalls show
-       List currently parked calls
-
-\end{verbatim}
-
-
-\section{queue add member}
-\subsection{Summary}
-\begin{verbatim}
-Add a channel to a specified queue
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: queue add member <channel> to <queue> [penalty <penalty>]
-
-\end{verbatim}
-
-
-\section{queue remove member}
-\subsection{Summary}
-\begin{verbatim}
-Removes a channel from a specified queue
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: queue remove member <channel> from <queue>
-
-\end{verbatim}
-
-
-\section{queue show}
-\subsection{Summary}
-\begin{verbatim}
-Show status of a specified queue
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: queue show
-       Provides summary information on a specified queue.
-
-\end{verbatim}
-
-
-\section{realtime load}
-\subsection{Summary}
-\begin{verbatim}
-Used to print out RealTime variables.
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: realtime load <family> <colmatch> <value>
-       Prints out a list of variables using the RealTime driver.
-
-\end{verbatim}
-
-
-\section{realtime update}
-\subsection{Summary}
-\begin{verbatim}
-Used to update RealTime variables.
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: realtime update <family> <colmatch> <value>
-       Update a single variable using the RealTime driver.
-
-\end{verbatim}
-
-
-\section{restart gracefully}
-\subsection{Summary}
-\begin{verbatim}
-Restart Asterisk gracefully
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: restart gracefully
-       Causes Asterisk to stop accepting new calls and exec() itself performing a cold
-       restart when all active calls have ended.
-
-\end{verbatim}
-
-
-\section{restart now}
-\subsection{Summary}
-\begin{verbatim}
-Restart Asterisk immediately
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: restart now
-       Causes Asterisk to hangup all calls and exec() itself performing a cold
-       restart.
-
-\end{verbatim}
-
-
-\section{restart when convenient}
-\subsection{Summary}
-\begin{verbatim}
-Restart Asterisk at empty call volume
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: restart when convenient
-       Causes Asterisk to perform a cold restart when all active calls have ended.
-
-\end{verbatim}
-
-
-\section{rpt debug level}
-\subsection{Summary}
-\begin{verbatim}
-Enable app_rpt debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt debug level {0-7}
-       Enables debug messages in app_rpt
-
-\end{verbatim}
-
-
-\section{rpt dump}
-\subsection{Summary}
-\begin{verbatim}
-Dump app_rpt structs for debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt dump <nodename>
-       Dumps struct debug info to log
-
-\end{verbatim}
-
-
-\section{rpt lstats}
-\subsection{Summary}
-\begin{verbatim}
-Dump link statistics
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt lstats <nodename>
-       Dumps link statistics to console
-
-\end{verbatim}
-
-
-\section{rpt reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload app_rpt config
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt reload
-       Reloads app_rpt running config parameters
-
-\end{verbatim}
-
-
-\section{rpt restart}
-\subsection{Summary}
-\begin{verbatim}
-Restart app_rpt
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt restart
-       Restarts app_rpt
-
-\end{verbatim}
-
-
-\section{rpt stats}
-\subsection{Summary}
-\begin{verbatim}
-Dump node statistics
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rpt stats <nodename>
-       Dumps node statistics to console
-
-\end{verbatim}
-
-
-\section{rtcp debug ip}
-\subsection{Summary}
-\begin{verbatim}
-Enable RTCP debugging on IP
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtcp debug [ip host[:port]]
-       Enable dumping of all RTCP packets to and from host.
-
-\end{verbatim}
-
-
-\section{rtcp debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable RTCP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtcp debug [ip host[:port]]
-       Enable dumping of all RTCP packets to and from host.
-
-\end{verbatim}
-
-
-\section{rtcp debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable RTCP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtcp debug off
-       Disable all RTCP debugging
-
-\end{verbatim}
-
-
-\section{rtcp stats}
-\subsection{Summary}
-\begin{verbatim}
-Enable RTCP stats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtcp stats
-       Enable dumping of RTCP stats.
-
-\end{verbatim}
-
-
-\section{rtcp stats off}
-\subsection{Summary}
-\begin{verbatim}
-Disable RTCP stats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtcp stats off
-       Disable all RTCP stats
-
-\end{verbatim}
-
-
-\section{rtp debug ip}
-\subsection{Summary}
-\begin{verbatim}
-Enable RTP debugging on IP
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtp debug [ip host[:port]]
-       Enable dumping of all RTP packets to and from host.
-
-\end{verbatim}
-
-
-\section{rtp debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable RTP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtp debug [ip host[:port]]
-       Enable dumping of all RTP packets to and from host.
-
-\end{verbatim}
-
-
-\section{rtp debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable RTP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: rtp debug off
-       Disable all RTP debugging
-
-\end{verbatim}
-
-
-\section{say load}
-\subsection{Summary}
-\begin{verbatim}
-set/show the say mode
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-say load new|old
-\end{verbatim}
-
-
-\section{sip history}
-\subsection{Summary}
-\begin{verbatim}
-Enable SIP history
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip history
-       Enables recording of SIP dialog history for debugging purposes.
-Use 'sip show history' to view the history of a call number.
-
-\end{verbatim}
-
-
-\section{sip history off}
-\subsection{Summary}
-\begin{verbatim}
-Disable SIP history
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip history off
-       Disables recording of SIP dialog history for debugging purposes
-
-\end{verbatim}
-
-
-\section{sip notify}
-\subsection{Summary}
-\begin{verbatim}
-Send a notify packet to a SIP peer
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip notify <type> <peer> [<peer>...]
-       Send a NOTIFY message to a SIP peer or peers
-       Message types are defined in sip_notify.conf
-
-\end{verbatim}
-
-
-\section{sip prune realtime}
-\subsection{Summary}
-\begin{verbatim}
-Prune cached Realtime object(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
-       Prunes object(s) from the cache.
-       Optional regular expression pattern is used to filter the objects.
-
-\end{verbatim}
-
-
-\section{sip prune realtime peer}
-\subsection{Summary}
-\begin{verbatim}
-Prune cached Realtime peer(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
-       Prunes object(s) from the cache.
-       Optional regular expression pattern is used to filter the objects.
-
-\end{verbatim}
-
-
-\section{sip prune realtime user}
-\subsection{Summary}
-\begin{verbatim}
-Prune cached Realtime user(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip prune realtime [peer|user] [<name>|all|like <pattern>]
-       Prunes object(s) from the cache.
-       Optional regular expression pattern is used to filter the objects.
-
-\end{verbatim}
-
-
-\section{sip reload}
-\subsection{Summary}
-\begin{verbatim}
-Reload SIP configuration
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip reload
-       Reloads SIP configuration from sip.conf
-
-\end{verbatim}
-
-
-\section{sip set debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable SIP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
-       sip set debug on
-          Enables dumping of all SIP messages for debugging purposes
-
-       sip set debug off
-          Disables dumping of all SIP messages
-
-       sip set debug ip <host[:PORT]>
-          Enables dumping of SIP messages to and from host.
-
-       sip set debug peer <peername>
-          Enables dumping of SIP messages to and from peer's IP.
-          Requires peer to be registered.
-
-\end{verbatim}
-
-
-\section{sip set debug ip}
-\subsection{Summary}
-\begin{verbatim}
-Enable SIP debugging on IP
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
-       sip set debug on
-          Enables dumping of all SIP messages for debugging purposes
-
-       sip set debug off
-          Disables dumping of all SIP messages
-
-       sip set debug ip <host[:PORT]>
-          Enables dumping of SIP messages to and from host.
-
-       sip set debug peer <peername>
-          Enables dumping of SIP messages to and from peer's IP.
-          Requires peer to be registered.
-
-\end{verbatim}
-
-
-\section{sip set debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable SIP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip set debug off
-       Disables dumping of SIP packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{sip set debug on}
-\subsection{Summary}
-\begin{verbatim}
-Enable SIP debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
-       sip set debug on
-          Enables dumping of all SIP messages for debugging purposes
-
-       sip set debug off
-          Disables dumping of all SIP messages
-
-       sip set debug ip <host[:PORT]>
-          Enables dumping of SIP messages to and from host.
-
-       sip set debug peer <peername>
-          Enables dumping of SIP messages to and from peer's IP.
-          Requires peer to be registered.
-
-\end{verbatim}
-
-
-\section{sip set debug peer}
-\subsection{Summary}
-\begin{verbatim}
-Enable SIP debugging on Peername
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip set debug {on|off|ip <host[:PORT]>|peer <peername>}
-       sip set debug on
-          Enables dumping of all SIP messages for debugging purposes
-
-       sip set debug off
-          Disables dumping of all SIP messages
-
-       sip set debug ip <host[:PORT]>
-          Enables dumping of SIP messages to and from host.
-
-       sip set debug peer <peername>
-          Enables dumping of SIP messages to and from peer's IP.
-          Requires peer to be registered.
-
-\end{verbatim}
-
-
-\section{sip show channels}
-\subsection{Summary}
-\begin{verbatim}
-List active SIP channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show channels
-       Lists all currently active SIP channels.
-
-\end{verbatim}
-
-
-\section{sip show channel}
-\subsection{Summary}
-\begin{verbatim}
-Show detailed SIP channel info
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show channel <channel>
-       Provides detailed status on a given SIP channel.
-
-\end{verbatim}
-
-
-\section{sip show domains}
-\subsection{Summary}
-\begin{verbatim}
-List our local SIP domains.
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show domains
-       Lists all configured SIP local domains.
-       Asterisk only responds to SIP messages to local domains.
-
-\end{verbatim}
-
-
-\section{sip show history}
-\subsection{Summary}
-\begin{verbatim}
-Show SIP dialog history
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show history <channel>
-       Provides detailed dialog history on a given SIP channel.
-
-\end{verbatim}
-
-
-\section{sip show inuse}
-\subsection{Summary}
-\begin{verbatim}
-List all inuse/limits
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show inuse [all]
-       List all SIP users and peers usage counters and limits.
-       Add option "all" to show all devices, not only those with a limit.
-
-\end{verbatim}
-
-
-\section{sip show objects}
-\subsection{Summary}
-\begin{verbatim}
-List all SIP object allocations
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show objects
-       Lists status of known SIP objects
-
-\end{verbatim}
-
-
-\section{sip show peers}
-\subsection{Summary}
-\begin{verbatim}
-List defined SIP peers
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show peers [like <pattern>]
-       Lists all known SIP peers.
-       Optional regular expression pattern is used to filter the peer list.
-
-\end{verbatim}
-
-
-\section{sip show peer}
-\subsection{Summary}
-\begin{verbatim}
-Show details on specific SIP peer
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show peer <name> [load]
-       Shows all details on one SIP peer and the current status.
-       Option "load" forces lookup of peer in realtime storage.
-
-\end{verbatim}
-
-
-\section{sip show registry}
-\subsection{Summary}
-\begin{verbatim}
-List SIP registration status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show registry
-       Lists all registration requests and status.
-
-\end{verbatim}
-
-
-\section{sip show settings}
-\subsection{Summary}
-\begin{verbatim}
-Show SIP global settings
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show settings
-       Provides detailed list of the configuration of the SIP channel.
-
-\end{verbatim}
-
-
-\section{sip show subscriptions}
-\subsection{Summary}
-\begin{verbatim}
-List active SIP subscriptions
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show subscriptions
-       Lists active SIP subscriptions for extension states
-
-\end{verbatim}
-
-
-\section{sip show users}
-\subsection{Summary}
-\begin{verbatim}
-List defined SIP users
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show users [like <pattern>]
-       Lists all known SIP users.
-       Optional regular expression pattern is used to filter the user list.
-
-\end{verbatim}
-
-
-\section{sip show user}
-\subsection{Summary}
-\begin{verbatim}
-Show details on specific SIP user
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip show user <name> [load]
-       Shows all details on one SIP user and the current status.
-       Option "load" forces lookup of peer in realtime storage.
-
-\end{verbatim}
-
-
-\section{sip unregister}
-\subsection{Summary}
-\begin{verbatim}
-Unregister (force expiration) a SIP peer from the registery
-
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sip unregister <peer>
-       Unregister (force expiration) a SIP peer from the registry
-
-\end{verbatim}
-
-
-\section{skinny reset}
-\subsection{Summary}
-\begin{verbatim}
-Reset Skinny device(s)
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: skinny reset <DeviceId|all> [restart]
-       Causes a Skinny device to reset itself, optionally with a full restart
-
-\end{verbatim}
-
-
-\section{skinny set debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable Skinny debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: skinny set debug
-       Enables dumping of Skinny packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{skinny set debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable Skinny debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: skinny set debug off
-       Disables dumping of Skinny packets for debugging purposes
-
-\end{verbatim}
-
-
-\section{skinny show devices}
-\subsection{Summary}
-\begin{verbatim}
-List defined Skinny devices
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: skinny show devices
-       Lists all devices known to the Skinny subsystem.
-
-\end{verbatim}
-
-
-\section{skinny show lines}
-\subsection{Summary}
-\begin{verbatim}
-List defined Skinny lines per device
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: skinny show lines
-       Lists all lines known to the Skinny subsystem.
-
-\end{verbatim}
-
-
-\section{sla show stations}
-\subsection{Summary}
-\begin{verbatim}
-Show SLA Stations
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sla show stations
-       This will list all stations defined in sla.conf
-
-\end{verbatim}
-
-
-\section{sla show trunks}
-\subsection{Summary}
-\begin{verbatim}
-Show SLA Trunks
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: sla show trunks
-       This will list all trunks defined in sla.conf
-
-\end{verbatim}
-
-
-\section{soft hangup}
-\subsection{Summary}
-\begin{verbatim}
-Request a hangup on a given channel
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: soft hangup <channel>
-       Request that a channel be hung up. The hangup takes effect
-       the next time the driver reads or writes from the channel
-
-\end{verbatim}
-
-
-\section{stop gracefully}
-\subsection{Summary}
-\begin{verbatim}
-Gracefully shut down Asterisk
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: stop gracefully
-       Causes Asterisk to not accept new calls, and exit when all
-       active calls have terminated normally.
-
-\end{verbatim}
-
-
-\section{stop now}
-\subsection{Summary}
-\begin{verbatim}
-Shut down Asterisk immediately
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: stop now
-       Shuts down a running Asterisk immediately, hanging up all active calls .
-
-\end{verbatim}
-
-
-\section{stop when convenient}
-\subsection{Summary}
-\begin{verbatim}
-Shut down Asterisk at empty call volume
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: stop when convenient
-       Causes Asterisk to perform a shutdown when all active calls have ended.
-
-\end{verbatim}
-
-
-\section{stun debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable STUN debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: stun debug
-       Enable STUN (Simple Traversal of UDP through NATs) debugging
-
-\end{verbatim}
-
-
-\section{stun debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable STUN debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: stun debug off
-       Disable STUN debugging
-
-\end{verbatim}
-
-
-\section{udptl debug}
-\subsection{Summary}
-\begin{verbatim}
-Enable UDPTL debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: udptl debug [ip host[:port]]
-       Enable dumping of all UDPTL packets to and from host.
-
-\end{verbatim}
-
-
-\section{udptl debug ip}
-\subsection{Summary}
-\begin{verbatim}
-Enable UDPTL debugging on IP
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: udptl debug [ip host[:port]]
-       Enable dumping of all UDPTL packets to and from host.
-
-\end{verbatim}
-
-
-\section{udptl debug off}
-\subsection{Summary}
-\begin{verbatim}
-Disable UDPTL debugging
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: udptl debug off
-       Disable all UDPTL debugging
-
-\end{verbatim}
-
-
-\section{ulimit}
-\subsection{Summary}
-\begin{verbatim}
-Set or show process resource limits
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: ulimit {-d|-l|-f|-m|-s|-t|-u|-v|-c|-n} [<num>]
-       Shows or sets the corresponding resource limit.
-         -d  Process data segment [readonly]
-         -l  Memory lock size [readonly]
-         -f  File size
-         -m  Process resident memory [readonly]
-         -s  Process stack size [readonly]
-         -t  CPU usage [readonly]
-         -u  Child processes
-         -v  Process virtual memory [readonly]
-         -c  Core dump file size
-         -n  Number of file descriptors
-
-\end{verbatim}
-
-
-\section{voicemail show users}
-\subsection{Summary}
-\begin{verbatim}
-List defined voicemail boxes
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: voicemail show users [for <context>]
-       Lists all mailboxes currently set up
-
-\end{verbatim}
-
-
-\section{voicemail show zones}
-\subsection{Summary}
-\begin{verbatim}
-List zone message formats
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: voicemail show zones
-       Lists zone message formats
-
-\end{verbatim}
-
-
-\section{zap destroy channel}
-\subsection{Summary}
-\begin{verbatim}
-Destroy a channel
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap destroy channel <chan num>
-	DON'T USE THIS UNLESS YOU KNOW WHAT YOU ARE DOING.  Immediately removes a given channel, whether it is in use or not
-
-\end{verbatim}
-
-
-\section{zap restart}
-\subsection{Summary}
-\begin{verbatim}
-Fully restart zaptel channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap restart
-	Restarts the zaptel channels: destroys them all and then
-	re-reads them from zapata.conf.
-	Note that this will STOP any running CALL on zaptel channels.
-
-\end{verbatim}
-
-
-\section{zap show cadences}
-\subsection{Summary}
-\begin{verbatim}
-List cadences
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap show cadences
-       Shows all cadences currently defined
-
-\end{verbatim}
-
-
-\section{zap show channels}
-\subsection{Summary}
-\begin{verbatim}
-Show active zapata channels
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap show channels [ trunkgroup <trunkgroup> | group <group> | context <context> ]
-	Shows a list of available channels with optional filtering
-	<group> must be a number between 0 and 63
-
-\end{verbatim}
-
-
-\section{zap show channel}
-\subsection{Summary}
-\begin{verbatim}
-Show information on a channel
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap show channel <chan num>
-	Detailed information about a given channel
-
-\end{verbatim}
-
-
-\section{zap show status}
-\subsection{Summary}
-\begin{verbatim}
-Show all Zaptel cards status
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap show status
-       Shows a list of Zaptel cards with status
-
-\end{verbatim}
-
-
-\section{zap show version}
-\subsection{Summary}
-\begin{verbatim}
-Show the Zaptel version in use
-\end{verbatim}
-\subsection{Usage}
-\begin{verbatim}
-Usage: zap show version
-       Shows the Zaptel version in use
-
-\end{verbatim}
-
-