Age | Commit message (Collapse) | Author | Files | Lines |
|
Removing all gtk source code, except for main.? which will remain
for the official removal during SFUS18
Change-Id: I4273baf207df1eaaa4b94623cfd10bf74b1fc4a4
Reviewed-on: https://code.wireshark.org/review/26937
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
|
|
Optimize code and open possibility for enriching IPv6 tap data.
Change-Id: I5a204d7464cde32123d5bfe664cc9b6bcf08dbe1
Reviewed-on: https://code.wireshark.org/review/23340
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Removed in v1.99.2rc0-399-g43f09e6, but some includes are still needed.
Basically I looked for the functions defined in the
ui/gtk/old-gtk-compat.h header file that were in files below ui/gtk/.
Then I matched it against the removed part in the above commit and added
the header back at its old place. In two other cases, the header was
only needed for Windows.
If the above commit did not reference the file, I checked which function
was in use and added the header on top, removing redundant conditionals.
Reported and tested by a user of GTK+ 2.12.12 on top of v2.0.5.
Change-Id: I649eec1e5531070f88c99d893c4920306f56d849
Reviewed-on: https://code.wireshark.org/review/17371
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
BYTES was not changed to account for the change of ip_len from 16 to 32 bits.
Change-Id: I37b472971fe42a05eb612f88bd38c753f5cf0a08
Reviewed-on: https://code.wireshark.org/review/16706
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change field ip_v_hl to version.
Change-Id: Ic7ce8d6d083f6413284a7b9ba91a2387b11b29fb
Reviewed-on: https://code.wireshark.org/review/16555
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
struct ws_ip is IP version agnostic. "ip_p" is too terse and less
appropriate.
Change-Id: I06b8740ab420e20781bf7b9efcf5dce19ad22ab2
Reviewed-on: https://code.wireshark.org/review/16519
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
This reverts commit 2e9f3c5d366eaa7139fc877b5301392166b3f985.
It breaks the registration of codec, dissector and libwiretap plugins.
Change-Id: I4ef91dd192f765adf87ea9fe9f3693e25dbd24de
Reviewed-on: https://code.wireshark.org/review/16012
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
|
|
Change-Id: I878ae6b121a669f9b7f4e1e57bc079f0cb44c0bf
Reviewed-on: https://code.wireshark.org/review/15270
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Try to improve address API and also fix some constness warnings
by not overloading the 'data' pointer to store malloc'ed buffers
(use private pointer for that instead).
Second try, now passing test suite.
Change-Id: Idc101cd866b6d4f13500c9d59da5c7a38847fb7f
Reviewed-on: https://code.wireshark.org/review/13946
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
This reverts commit 13ec77a9fc3af3b0b502820d0b55796c89997896.
This commit introduces a segmentation fault for Lua code (uncovered by the test suite).
Change-Id: Ibc273d1915cda9632697b9f138f0ae104d3fb65e
Reviewed-on: https://code.wireshark.org/review/13813
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Try to improve 'address' API (to be easier/safer) and also avoid
some constness warnings by not overloading the 'data' pointer to
store malloc'ed buffers (use private pointer for that instead).
Change-Id: I7456516b12c67620ceadac447907c12f5905bd49
Reviewed-on: https://code.wireshark.org/review/13463
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I70db0a345cc4c5c57c454371deb4f92f9ac4b9ac
Reviewed-on: https://code.wireshark.org/review/13501
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
directory.
This also moved color.h into color_filters.h
Change-Id: Ic19e27aa1b3ec67e764aa7ee8bbef7b1187bb12e
Reviewed-on: https://code.wireshark.org/review/12831
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the ui directory.
Change-Id: I10e95e66c8da5b880133452ebc484c53046e87ba
Reviewed-on: https://code.wireshark.org/review/11199
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Optional filter argument wasn't correctly parsed.
Change-Id: Ic0418fa866e1a00880b4e41bb28267a155a71aa5
Reviewed-on: https://code.wireshark.org/review/10088
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Selecting a row in the statistics table causes a Glib assertion failure.
GLib:ERROR:ghash.c:373:g_hash_table_lookup_node: assertion failed: (hash_table->ref_count > 0)
When the comparestat_draw() function is called, the cs->ip_id_set hash table
is created and then immediately destroyed, but the hash table lookup
to cs->ip_id_set in new_tree_view_selection_changed() can happen anytime
the user clicks on a table row.
Bug: 11098
Change-Id: I6c7a39c947ca11327c3fc3ab0d4caa735798d142
Reviewed-on: https://code.wireshark.org/review/10096
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: I2941bb7e6dc0fce3e1256af6e5e19d2997de5801
Reviewed-on: https://code.wireshark.org/review/7573
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The Service Response Time (SRT) window currently provides the
columns: Index, Procedure, Calls, Min SRT, Max SRT, and Avg SRT.
A Sum column has been found useful in some customer situations
to understand the total time spent doing a set of procedures.
For example, in one case we were trying to isolate whether most
time was being spent on a client thread or in the act of making
outbound calls. We knew the start and end time of the client call,
so with the "Sum" of time spent in that period, we could isolate
a particular set of procedures driving the slow down.
Additional changes made in this patch:
* Add " (s)" to Min, Max, Avg, and Sum columns to make it clear
that times are in seconds.
* Refactor out width and height constants used in calls to
gtk_window_set_default_size in most of the SRT users into
#define SRT_PREFERRED_WIDTH and SRT_PREFERRED_HEIGHT. Also
increase the common width of 550 to 650 to account for the
additional column.
Change-Id: I20f152eecbcd0bbf69f71c6c6b9f9463e8867e23
Reviewed-on: https://code.wireshark.org/review/7047
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Add by commit g43f09e67b (Remove unneeded includes from ui folder)
Change-Id: I7c9d9e2bbd76d062f96422c74ee8eb8c6ecd328b
Reviewed-on: https://code.wireshark.org/review/6808
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Also replaced comments mentioning se_alloc memory with wmem_file_scope, since it's more accurate.
It seems that many of the TShark stat taps may be leaking memory, because the hash tables created by the taps don't get a chance to be freed. Somewhat academic since TShark exits shortly after displaying any stats, but a leak none the less.
Change-Id: I8ceecbd00d65b3442dc02d720b39c2e15aa0c8a6
Reviewed-on: https://code.wireshark.org/review/6557
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
These cases were pretty easy to identify. Also replaced some comments that referenced ep_alloced memory, when it's now in fact wmem_alloced.
Change-Id: I07d2f390a9c0b34aa2956880476755d1acf5db0a
Reviewed-on: https://code.wireshark.org/review/6392
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change-Id: I4f1078b20f41800f72a751612703ad0d4c2ae87b
Reviewed-on: https://code.wireshark.org/review/6323
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change-Id: Ifd1eebff9080cd3867e44e4dcb2d2681370ed60a
Reviewed-on: https://code.wireshark.org/review/6128
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
|
|
Change-Id: I9cafa3cd5c74121168777d8c656e7e94e89efd3c
Reviewed-on: https://code.wireshark.org/review/6065
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
|
|
The intent is to handle more than just command-line arguments; reflect that.
Change-Id: Ia10efda85a9d11c6579d1bec6f789cee30d9e825
Reviewed-on: https://code.wireshark.org/review/5304
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The old routine had stat_ in the name, as the expectation was that they
were for statistics taps; that's still the expectation, so have stat_ in
the data structure and routine names.
Change-Id: Ic98d011012b8641173d41fa0ec4f4e625614370a
Reviewed-on: https://code.wireshark.org/review/5303
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The intent here is to centralize more UI information so that we can move
more tap UI stuff to common code. This is a beginning.
Change-Id: Ic35ac0c01bc7b942aab88177db4065847a5e6c30
Reviewed-on: https://code.wireshark.org/review/5301
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The only place where the packet list column precision should be set is
in the code for the column precision menu item, the code for the recent
file item for that precision, and, if we were to provide it, code for a
command-line optpion to set it. It's not up to some tap to change it.
Change-Id: I547e606fb346b4c21674a66e883cbbe382055a37
Reviewed-on: https://code.wireshark.org/review/4336
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
The groups are, technically, independent of the notion of a menu, and,
if we have mechanisms by which taps that are not only GUI
toolkit-independent but independent of the *existence* of a GUI can be
registered, they might want to register themselves in a group just in
case they're running in a program that has a GUI.
Also, this might fix the Debian package build.
Change-Id: I29435681e79748fd4f2e0c5ac872cd11f831d172
Reviewed-on: https://code.wireshark.org/review/2830
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I7bed7f7931845bc41035535cc62e1fe17c71047d
Reviewed-on: https://code.wireshark.org/review/2726
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
compare_stat.c:235:34: error: taking the absolute value of unsigned type 'guint32' (aka 'unsigned int') has no effect [-Werror,-Wabsolute-value]
compare_stat.c:235:34: note: remove the call to 'abs' since unsigned values cannot be negative
compare_stat.c:406:55: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
compare_stat.c:406:55: note: remove the call to 'abs' since unsigned values cannot be negative
compare_stat.c:432:56: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
compare_stat.c:432:56: note: remove the call to 'abs' since unsigned values cannot be negative
Change-Id: I03cc3136df3faf42c25986f52f015b8d87ce5774
Reviewed-on: https://code.wireshark.org/review/675
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
GtkStockItem usage is deprecated with all the GTK_STOCK_.* stock ids.
We keep a stock id based approach but without relying on GTK's
GtkStockItem system.
We create our own internal stock ids for {icon, label} tuples and keep
the original GTK stock id #define-s and values to preserve backward
compatibility.
Change-Id: Ia0b35a5903f079e92c8026e3df21bbf0be2d06b0
Reviewed-on: https://code.wireshark.org/review/302
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change-Id: I13fa3d6af3d0fddc367835fc05efdbe106b991e6
Reviewed-on: https://code.wireshark.org/review/228
Reviewed-by: Evan Huus <eapache@gmail.com>
|
|
Change-Id: I1cedc611c9b7888eb671cf858c6f7819d37afba9
Reviewed-on: https://code.wireshark.org/review/219
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
svn path=/trunk/; revision=54834
|
|
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9591
svn path=/trunk/; revision=54387
|
|
svn path=/trunk/; revision=54092
|
|
svn path=/trunk/; revision=53230
|
|
Dissectors should just use (reported) tvb length and taps have other ways to get the data.
svn path=/trunk/; revision=52899
|
|
there and moving it avoids having to recompile the file for use in editcap and capinfos (which don't link against libwireshark).
svn path=/trunk/; revision=50598
|
|
not wsutil.
svn path=/trunk/; revision=50159
|
|
A bunch of files didn't really need to include these header files so remove
the include line rather than changing it.
svn path=/trunk/; revision=50154
|
|
remove C++ incompatibilities
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8416 attachment #10408
Note: The following parts of the patch had been previously done:
asn1/snmp/packet-snmp-template.c
epan/dissectors/packet-snmp.c
epan/dissectors/packet-x11.c
svn path=/trunk/; revision=48448
|
|
function name;
(At least some (gcc ?) compilers give a "shadow" warning for these).
svn path=/trunk/; revision=46402
|
|
svn path=/trunk/; revision=45202
|
|
cleanup code by removing them.
svn path=/trunk/; revision=45201
|
|
svn path=/trunk/; revision=45016
|