diff options
| -rw-r--r-- | Makefile.target | 2 | ||||
| -rw-r--r-- | hw/ppce500_mpc8544ds.c | 33 | ||||
| -rw-r--r-- | hw/ppce500_spin.c | 215 |
3 files changed, 245 insertions, 5 deletions
diff --git a/Makefile.target b/Makefile.target index 8db9f37c7..ff3efa430 100644 --- a/Makefile.target +++ b/Makefile.target @@ -247,7 +247,7 @@ endif obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o obj-ppc-y += ppc440.o ppc440_bamboo.o # PowerPC E500 boards -obj-ppc-y += ppce500_mpc8544ds.o mpc8544_guts.o +obj-ppc-y += ppce500_mpc8544ds.o mpc8544_guts.o ppce500_spin.o # PowerPC 440 Xilinx ML507 reference board. obj-ppc-y += virtex_ml507.o obj-ppc-$(CONFIG_KVM) += kvm_ppc.o diff --git a/hw/ppce500_mpc8544ds.c b/hw/ppce500_mpc8544ds.c index 9379624e3..3b8b449a5 100644 --- a/hw/ppce500_mpc8544ds.c +++ b/hw/ppce500_mpc8544ds.c @@ -49,6 +49,7 @@ #define MPC8544_PCI_IO 0xE1000000 #define MPC8544_PCI_IOLEN 0x10000 #define MPC8544_UTIL_BASE (MPC8544_CCSRBAR_BASE + 0xe0000) +#define MPC8544_SPIN_BASE 0xEF000000 struct boot_info { @@ -164,6 +165,18 @@ static void mmubooke_create_initial_mapping(CPUState *env, tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; } +static void mpc8544ds_cpu_reset_sec(void *opaque) +{ + CPUState *env = opaque; + + cpu_reset(env); + + /* Secondary CPU starts in halted state for now. Needs to change when + implementing non-kernel boot. */ + env->halted = 1; + env->exception_index = EXCP_HLT; +} + static void mpc8544ds_cpu_reset(void *opaque) { CPUState *env = opaque; @@ -172,6 +185,7 @@ static void mpc8544ds_cpu_reset(void *opaque) cpu_reset(env); /* Set initial guest state. */ + env->halted = 0; env->gpr[1] = (16<<20) - 8; env->gpr[3] = bi->dt_base; env->nip = bi->entry; @@ -199,7 +213,6 @@ static void mpc8544ds_init(ram_addr_t ram_size, unsigned int pci_irq_nrs[4] = {1, 2, 3, 4}; qemu_irq **irqs, *mpic; DeviceState *dev; - struct boot_info *boot_info; CPUState *firstenv = NULL; /* Setup CPUs */ @@ -234,9 +247,16 @@ static void mpc8544ds_init(ram_addr_t ram_size, env->spr[SPR_40x_TCR] = 1 << 26; /* Register reset handler */ - boot_info = g_malloc0(sizeof(struct boot_info)); - qemu_register_reset(mpc8544ds_cpu_reset, env); - env->load_info = boot_info; + if (!i) { + /* Primary CPU */ + struct boot_info *boot_info; + boot_info = g_malloc0(sizeof(struct boot_info)); + qemu_register_reset(mpc8544ds_cpu_reset, env); + env->load_info = boot_info; + } else { + /* Secondary CPUs */ + qemu_register_reset(mpc8544ds_cpu_reset_sec, env); + } } env = firstenv; @@ -289,6 +309,9 @@ static void mpc8544ds_init(ram_addr_t ram_size, } } + /* Register spinning region */ + sysbus_create_simple("e500-spin", MPC8544_SPIN_BASE, NULL); + /* Load kernel. */ if (kernel_filename) { kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL); @@ -321,6 +344,8 @@ static void mpc8544ds_init(ram_addr_t ram_size, /* If we're loading a kernel directly, we must load the device tree too. */ if (kernel_filename) { + struct boot_info *boot_info; + #ifndef CONFIG_FDT cpu_abort(env, "Compiled without FDT support - can't load kernel\n"); #endif diff --git a/hw/ppce500_spin.c b/hw/ppce500_spin.c new file mode 100644 index 000000000..cccd94073 --- /dev/null +++ b/hw/ppce500_spin.c @@ -0,0 +1,215 @@ +/* + * QEMU PowerPC e500v2 ePAPR spinning code + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Alexander Graf, <agraf@suse.de> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + * + * This code is not really a device, but models an interface that usually + * firmware takes care of. It's used when QEMU plays the role of firmware. + * + * Specification: + * + * https://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.1.pdf + * + */ + +#include "hw.h" +#include "sysemu.h" +#include "sysbus.h" +#include "kvm.h" + +#define MAX_CPUS 32 + +typedef struct spin_info { + uint64_t addr; + uint64_t r3; + uint32_t resv; + uint32_t pir; + uint64_t reserved; +} __attribute__ ((packed)) SpinInfo; + +typedef struct spin_state { + SysBusDevice busdev; + MemoryRegion iomem; + SpinInfo spin[MAX_CPUS]; +} SpinState; + +typedef struct spin_kick { + CPUState *env; + SpinInfo *spin; +} SpinKick; + +static void spin_reset(void *opaque) +{ + SpinState *s = opaque; + int i; + + for (i = 0; i < MAX_CPUS; i++) { + SpinInfo *info = &s->spin[i]; + + info->pir = i; + info->r3 = i; + info->addr = 1; + } +} + +/* Create -kernel TLB entries for BookE, linearly spanning 256MB. */ +static inline target_phys_addr_t booke206_page_size_to_tlb(uint64_t size) +{ + return (ffs(size >> 10) - 1) >> 1; +} + +static void mmubooke_create_initial_mapping(CPUState *env, + target_ulong va, + target_phys_addr_t pa, + target_phys_addr_t len) +{ + ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 1); + target_phys_addr_t size; + + size = (booke206_page_size_to_tlb(len) << MAS1_TSIZE_SHIFT); + tlb->mas1 = MAS1_VALID | size; + tlb->mas2 = (va & TARGET_PAGE_MASK) | MAS2_M; + tlb->mas7_3 = pa & TARGET_PAGE_MASK; + tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; +} + +static void spin_kick(void *data) +{ + SpinKick *kick = data; + CPUState *env = kick->env; + SpinInfo *curspin = kick->spin; + target_phys_addr_t map_size = 64 * 1024 * 1024; + target_phys_addr_t map_start; + + cpu_synchronize_state(env); + stl_p(&curspin->pir, env->spr[SPR_PIR]); + env->nip = ldq_p(&curspin->addr) & (map_size - 1); + env->gpr[3] = ldq_p(&curspin->r3); + env->gpr[4] = 0; + env->gpr[5] = 0; + env->gpr[6] = 0; + env->gpr[7] = map_size; + env->gpr[8] = 0; + env->gpr[9] = 0; + + map_start = ldq_p(&curspin->addr) & ~(map_size - 1); + mmubooke_create_initial_mapping(env, 0, map_start, map_size); + + env->halted = 0; + env->exception_index = -1; + qemu_cpu_kick(env); +} + +static void spin_write(void *opaque, target_phys_addr_t addr, uint64_t value, + unsigned len) +{ + SpinState *s = opaque; + int env_idx = addr / sizeof(SpinInfo); + CPUState *env; + SpinInfo *curspin = &s->spin[env_idx]; + uint8_t *curspin_p = (uint8_t*)curspin; + + for (env = first_cpu; env != NULL; env = env->next_cpu) { + if (env->cpu_index == env_idx) { + break; + } + } + + if (!env) { + /* Unknown CPU */ + return; + } + + if (!env->cpu_index) { + /* primary CPU doesn't spin */ + return; + } + + curspin_p = &curspin_p[addr % sizeof(SpinInfo)]; + switch (len) { + case 1: + stb_p(curspin_p, value); + break; + case 2: + stw_p(curspin_p, value); + break; + case 4: + stl_p(curspin_p, value); + break; + } + + if (!(ldq_p(&curspin->addr) & 1)) { + /* run CPU */ + SpinKick kick = { + .env = env, + .spin = curspin, + }; + + run_on_cpu(env, spin_kick, &kick); + } +} + +static uint64_t spin_read(void *opaque, target_phys_addr_t addr, unsigned len) +{ + SpinState *s = opaque; + uint8_t *spin_p = &((uint8_t*)s->spin)[addr]; + + switch (len) { + case 1: + return ldub_p(spin_p); + case 2: + return lduw_p(spin_p); + case 4: + return ldl_p(spin_p); + default: + assert(0); + } +} + +const MemoryRegionOps spin_rw_ops = { + .read = spin_read, + .write = spin_write, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static int ppce500_spin_initfn(SysBusDevice *dev) +{ + SpinState *s; + + s = FROM_SYSBUS(SpinState, sysbus_from_qdev(dev)); + + memory_region_init_io(&s->iomem, &spin_rw_ops, s, "e500 spin pv device", + sizeof(SpinInfo) * MAX_CPUS); + sysbus_init_mmio_region(dev, &s->iomem); + + qemu_register_reset(spin_reset, s); + + return 0; +} + +static SysBusDeviceInfo ppce500_spin_info = { + .init = ppce500_spin_initfn, + .qdev.name = "e500-spin", + .qdev.size = sizeof(SpinState), +}; + +static void ppce500_spin_register(void) +{ + sysbus_register_withprop(&ppce500_spin_info); +} +device_init(ppce500_spin_register); |