aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--hw/realview.c108
-rw-r--r--qemu-doc.texi7
2 files changed, 83 insertions, 32 deletions
diff --git a/hw/realview.c b/hw/realview.c
index 0e57b5085..50386f8e0 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -16,12 +16,11 @@
#include "sysemu.h"
#include "boards.h"
+#define SMP_BOOT_ADDR 0xe0000000
/* Board init. */
static struct arm_boot_info realview_binfo = {
- .loader_start = 0x0,
- .smp_loader_start = 0x80000000,
- .board_id = 0x33b,
+ .smp_loader_start = SMP_BOOT_ADDR,
};
static void secondary_cpu_reset(void *opaque)
@@ -32,12 +31,13 @@ static void secondary_cpu_reset(void *opaque)
/* Set entry point for secondary CPUs. This assumes we're using
the init code from arm_boot.c. Real hardware resets all CPUs
the same. */
- env->regs[15] = 0x80000000;
+ env->regs[15] = SMP_BOOT_ADDR;
}
enum realview_board_type {
BOARD_EB,
- BOARD_EB_MPCORE
+ BOARD_EB_MPCORE,
+ BOARD_PB_A8
};
static void realview_init(ram_addr_t ram_size,
@@ -55,10 +55,13 @@ static void realview_init(ram_addr_t ram_size,
PCIBus *pci_bus;
NICInfo *nd;
int n;
- int done_smc = 0;
+ int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = (board_type == BOARD_EB_MPCORE);
+ int is_pb = (board_type == BOARD_PB_A8);
uint32_t proc_id = 0;
+ uint32_t sys_id;
+ ram_addr_t low_ram_size;
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
@@ -83,11 +86,22 @@ static void realview_init(ram_addr_t ram_size,
}
ram_offset = qemu_ram_alloc(ram_size);
+ low_ram_size = ram_size;
+ if (low_ram_size > 0x10000000)
+ low_ram_size = 0x10000000;
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
- cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
+ cpu_register_physical_memory(0, low_ram_size, ram_offset | IO_MEM_RAM);
+ if (is_pb) {
+ /* And again at a high address. */
+ cpu_register_physical_memory(0x70000000, ram_size,
+ ram_offset | IO_MEM_RAM);
+ } else {
+ ram_size = low_ram_size;
+ }
- arm_sysctl_init(0x10000000, 0xc1400400, proc_id);
+ sys_id = is_pb ? 0x01780500 : 0xc1400400;
+ arm_sysctl_init(0x10000000, sys_id, proc_id);
if (is_mpcore) {
dev = qdev_create(NULL, "realview_mpcore");
@@ -98,7 +112,9 @@ static void realview_init(ram_addr_t ram_size,
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
} else {
- dev = sysbus_create_simple("realview_gic", 0x10040000, cpu_irq[0]);
+ uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
+ /* For now just create the nIRQ GIC, and ignore the others. */
+ dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
@@ -124,23 +140,30 @@ static void realview_init(ram_addr_t ram_size,
sysbus_create_simple("pl031", 0x10017000, pic[10]);
- dev = sysbus_create_varargs("realview_pci", 0x60000000,
- pic[48], pic[49], pic[50], pic[51], NULL);
- pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
- if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
- }
- n = drive_get_max_bus(IF_SCSI);
- while (n >= 0) {
- pci_create_simple(pci_bus, -1, "lsi53c895a");
- n--;
+ if (!is_pb) {
+ dev = sysbus_create_varargs("realview_pci", 0x60000000,
+ pic[48], pic[49], pic[50], pic[51], NULL);
+ pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
+ if (usb_enabled) {
+ usb_ohci_init_pci(pci_bus, -1);
+ }
+ n = drive_get_max_bus(IF_SCSI);
+ while (n >= 0) {
+ pci_create_simple(pci_bus, -1, "lsi53c895a");
+ n--;
+ }
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
- if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
- smc91c111_init(nd, 0x4e000000, pic[28]);
- done_smc = 1;
+ if ((!nd->model && !done_nic)
+ || strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0) {
+ if (is_pb) {
+ lan9118_init(nd, 0x4e000000, pic[28]);
+ } else {
+ smc91c111_init(nd, 0x4e000000, pic[28]);
+ }
+ done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
@@ -155,7 +178,7 @@ static void realview_init(ram_addr_t ram_size,
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
- /* 0x10008000 Character LCD. */
+ /* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
@@ -169,17 +192,21 @@ static void realview_init(ram_addr_t ram_size,
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
- /* 0x10016000 Reserved. */
+ /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
- /* 0x10040000 GIC1. */
- /* 0x10050000 GIC2. */
- /* 0x10060000 GIC3. */
- /* 0x10070000 GIC4. */
+ /* 0x10040000 GIC1. (EB) */
+ /* 0x10050000 GIC2. (EB) */
+ /* 0x10060000 GIC3. (EB) */
+ /* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
+ /* 0x1e000000 GIC1. (PB) */
+ /* 0x1e001000 GIC2. (PB) */
+ /* 0x1e002000 GIC3. (PB) */
+ /* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
@@ -203,13 +230,16 @@ static void realview_init(ram_addr_t ram_size,
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(0x1000);
- cpu_register_physical_memory(0x80000000, 0x1000, ram_offset | IO_MEM_RAM);
+ cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
+ ram_offset | IO_MEM_RAM);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
+ realview_binfo.board_id = is_pb ? 0x769 : 0x33b;
+ realview_binfo.loader_start = is_pb ? 0x70000000 : 0;
arm_load_kernel(first_cpu, &realview_binfo);
}
@@ -237,6 +267,18 @@ static void realview_eb_mpcore_init(ram_addr_t ram_size,
initrd_filename, cpu_model, BOARD_EB_MPCORE);
}
+static void realview_pb_a8_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ if (!cpu_model) {
+ cpu_model = "cortex-a8";
+ }
+ realview_init(ram_size, boot_device, kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, BOARD_PB_A8);
+}
+
static QEMUMachine realview_eb_machine = {
.name = "realview-eb",
.desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",
@@ -252,10 +294,18 @@ static QEMUMachine realview_eb_mpcore_machine = {
.max_cpus = 4,
};
+static QEMUMachine realview_pb_a8_machine = {
+ .name = "realview-pb-a8",
+ .desc = "ARM RealView Platform Baseboard for Cortex-A8",
+ .init = realview_pb_a8_init,
+ .use_scsi = 1,
+};
+
static void realview_machine_init(void)
{
qemu_register_machine(&realview_eb_machine);
qemu_register_machine(&realview_eb_mpcore_machine);
+ qemu_register_machine(&realview_pb_a8_machine);
}
machine_init(realview_machine_init);
diff --git a/qemu-doc.texi b/qemu-doc.texi
index 38dbda7b2..eca43715b 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -80,7 +80,7 @@ For system emulation, the following hardware targets are supported:
@item MIPS Magnum (64-bit MIPS processor)
@item ARM Integrator/CP (ARM)
@item ARM Versatile baseboard (ARM)
-@item ARM RealView Emulation baseboard (ARM)
+@item ARM RealView Emulation/Platform baseboard (ARM)
@item Spitz, Akita, Borzoi, Terrier and Tosa PDAs (PXA270 processor)
@item Luminary Micro LM3S811EVB (ARM Cortex-M3)
@item Luminary Micro LM3S6965EVB (ARM Cortex-M3)
@@ -1659,7 +1659,8 @@ LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices.
PL181 MultiMedia Card Interface with SD card.
@end itemize
-The ARM RealView Emulation baseboard is emulated with the following devices:
+The ARM RealView Emulation/Platform baseboard is emulated with the following
+devices:
@itemize @minus
@item
@@ -1669,7 +1670,7 @@ ARM AMBA Generic/Distributed Interrupt Controller
@item
Four PL011 UARTs
@item
-SMC 91c111 Ethernet adapter
+SMC 91c111 or SMSC LAN9118 Ethernet adapter
@item
PL110 LCD controller
@item
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 05:09:43 +0000