split away drive init from ide_init2()

This allows the ide bus being initialized without drives attached
and the drives being attached and initialization later on as
separate step.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

2 files changed, 40 insertions, 32 deletions

diff --git a/hw/ide/core.c b/hw/ide/core.c
index 5f6e2cb5d..0b6de6caa 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2518,51 +2518,58 @@ void ide_reset(IDEState *s)
     s->media_changed = 0;
 }
 
+void ide_init_drive(IDEState *s, DriveInfo *dinfo)
+{
+    int cylinders, heads, secs;
+    uint64_t nb_sectors;
+
+    if (dinfo && dinfo->bdrv) {
+        s->bs = dinfo->bdrv;
+        bdrv_get_geometry(s->bs, &nb_sectors);
+        bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
+        s->cylinders = cylinders;
+        s->heads = heads;
+        s->sectors = secs;
+        s->nb_sectors = nb_sectors;
+        /* The SMART values should be preserved across power cycles
+           but they aren't.  */
+        s->smart_enabled = 1;
+        s->smart_autosave = 1;
+        s->smart_errors = 0;
+        s->smart_selftest_count = 0;
+        if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+            s->is_cdrom = 1;
+            bdrv_set_change_cb(s->bs, cdrom_change_cb, s);
+        }
+        strncpy(s->drive_serial_str, drive_get_serial(s->bs),
+                sizeof(s->drive_serial_str));
+    }
+    if (strlen(s->drive_serial_str) == 0)
+        snprintf(s->drive_serial_str, sizeof(s->drive_serial_str),
+                 "QM%05d", s->drive_serial);
+    ide_reset(s);
+}
+
 void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
                qemu_irq irq)
 {
     IDEState *s;
     static int drive_serial = 1;
-    int i, cylinders, heads, secs;
-    uint64_t nb_sectors;
+    int i;
 
     for(i = 0; i < 2; i++) {
         s = bus->ifs + i;
         s->bus = bus;
         s->unit = i;
-        if (i == 0 && hd0)
-            s->bs = hd0->bdrv;
-        if (i == 1 && hd1)
-            s->bs = hd1->bdrv;
-        s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
-        if (s->bs) {
-            bdrv_get_geometry(s->bs, &nb_sectors);
-            bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
-            s->cylinders = cylinders;
-            s->heads = heads;
-            s->sectors = secs;
-            s->nb_sectors = nb_sectors;
-	    /* The SMART values should be preserved across power cycles
-	       but they aren't.  */
-	    s->smart_enabled = 1;
-	    s->smart_autosave = 1;
-	    s->smart_errors = 0;
-	    s->smart_selftest_count = 0;
-	    s->smart_selftest_data = qemu_blockalign(s->bs, 512);
-            if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
-                s->is_cdrom = 1;
-		bdrv_set_change_cb(s->bs, cdrom_change_cb, s);
-            }
-        }
         s->drive_serial = drive_serial++;
-        strncpy(s->drive_serial_str, drive_get_serial(s->bs),
-                sizeof(s->drive_serial_str));
-        if (strlen(s->drive_serial_str) == 0)
-            snprintf(s->drive_serial_str, sizeof(s->drive_serial_str),
-                    "QM%05d", s->drive_serial);
+        s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4);
+        s->smart_selftest_data = qemu_blockalign(s->bs, 512);
         s->sector_write_timer = qemu_new_timer(vm_clock,
                                                ide_sector_write_timer_cb, s);
-        ide_reset(s);
+        if (i == 0)
+            ide_init_drive(s, hd0);
+        if (i == 1)
+            ide_init_drive(s, hd1);
     }
     bus->irq = irq;
 }
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index b9a7c721a..62aef1c3b 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -527,6 +527,7 @@ uint32_t ide_data_readw(void *opaque, uint32_t addr);
 void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
 uint32_t ide_data_readl(void *opaque, uint32_t addr);
 
+void ide_init_drive(IDEState *s, DriveInfo *dinfo);
 void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1,
                qemu_irq irq);
 void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);