Age | Commit message (Collapse) | Author | Files | Lines |
|
Log via LOGP() like the rest of the file instead of fprintf() for
consistency. While at it, also print error cause.
Change-Id: Id205bcd9bdb7c3e4b96493d50be8381a6fa80ac6
|
|
Change-Id: I2f871cb16e5e1033e42863a9e12459057004782c
|
|
Change-Id: I18eb46743e4c0e4e8f8032883f39fec355f03c78
|
|
This makes reading code easier and simplifies further modifications.
Change-Id: I7eff2a61495ff167dc19fc9a41882a7a11fbf32d
|
|
This simplifies adding new functions and re-using them from other parts
of the code.
Change-Id: Ibad400a99afe052f011f54fc706836b6bf89f4b9
|
|
Fixes following ASan warning:
git/osmocom-bb/src/host/layer23/src/misc/../common/main.c:146:2: runtime error: null pointer passed as argument 2, which is declared to never be null
The warning however is harmless since in that case, app_len = 0 and thus
size to copy is 0.
Change-Id: I009a5b53f1e5be72ce347d64d3a7cb1d95d37ea3
|
|
Change-Id: I0e97d3e8c3688064c959ea60ecef50cfbbc1bcd6
|
|
Change-Id: I5c1a6d98079ad846d114584a17ba9d80d95e0595
|
|
Unlike the DATA messages, traffic frames may have different length.
Instead of having fixed payload (i.e. TCH frame) length, let's
introduce a flexible array member. This would allow one to
calculate the frame length using the MSGB API.
Change-Id: I119fa36c84e95c3003d57c19e25f8146ed45c3c6
|
|
Change-Id: Iad00eebf03b38b9c4fc2d7ed66697d23a953d8b2
|
|
L1CTL implementation (i.e. l1ctl.c) is not a good place for the
SIM specific stuff. Let's move it to the proper place (i.e. sim.c).
As a bonus, this change fixes a possible problem of loosing the
cached APDUs if two or more L2&3 applications are using a single
LAPDm connection. The APDU buffer is dedicated per MS now.
Change-Id: I564c610e45aa3b630ca5d1ec6bc1cace0dc9c566
|
|
Previously the wildcard address (i.e. '0.0.0.0') was hard-coded
as the bind address of TRX interface. Let's make it configurable
by introducing a command line option.
Note that the '--trx-ip' option was deprecated by '--trx-remote',
because it isn't clean whether it is remore or local address. It
still can be used, but was removed from help message.
Change-Id: Ic2f43632cc57bb6f722eba05219e438f97fecb95
|
|
Change-Id: Ib63e1205d7b845c8779eb511635f26bae3a18085
|
|
Change-Id: I1176576f54c1d68e79cc6ac37d61a9033f7018dd
|
|
Almost all handlers for received L1CTL messages are also affected
by the bug fixed in I7fe2e00bb45ba07c9bb7438445eededfa09c96f3. In
short, they do verify the length of 'msg->l2h' or 'msg->l3h', but
not the 'msg->l1h'. Let's fix this, and also add missing checks.
Change-Id: I866bb5d97a1cc1b6cb887877bb444b9e3dca977a
|
|
As we assign the payload following L1CTL header to 'msg->l1h',
it makes sense to avoid possible naming confusion.
Change-Id: I5d21ca8664b3445f472d3ffde90d0e11805dcb16
|
|
The actual L1CTL header is pointed by 'msg->l1h', not 'l2h'!
Since msg->l2h is NULL (because nobody set it), the result of
msgb_l2len() would always be bigger than size of L1CTL header,
as it is calculated in the following way:
return msgb->tail - (uint8_t *)msgb_l2(msgb);
So, in case if 'msg->l2h' is NULL, it turns into:
return msgb->tail - 0;
Change-Id: I7fe2e00bb45ba07c9bb7438445eededfa09c96f3
|
|
In l1ctl_recv() we actually expect to 'see' the L1CTL header
instead of the DL info header. Let's fix this.
Change-Id: Ic7d017bef04f3c186565d5dade36959df1019bd8
|
|
There is no need to keep the L1CTL header in messages being sent
towards the upper layers, but the L1 info header can be used by
L2&3 to obtain some information, e.g. TDMA frame number.
Change-Id: Id64249f1b7a1c2be578263ba62aa195c452ab7e8
|
|
This change extends sched_trx_chan_nr2pchan_config() with Osmocom
specific cbits related to CBCH, so now one can to decode
CBCH channels in dedicated mode (see L1CTL_DM_EST_REQ).
Change-Id: I9347c45638223cac34f4b48eb736e51a5055a36f
|
|
According to GSM TS 05.02, there are two ways to enable CBCH:
a) replace sub-slot number 2 of CCCH+SDCCH/4 (comb. V),
b) replace sub-slot number 2 of SDCCH/8 (comb. VII).
Unlike SDCCH/8 (case b), CCCH+SDCCH/4 can be allocated on TS0
only, and shall not use frequency hopping. This means that
implementing CBCH support on SDCCH/8 would require much more
efforts than on combined CCCH+SDCCH/4, as in last case CBCH
messages can be received without the need to switch from
idle to dedicated mode.
This change introduces a new ccch_mode item, which should be
used by the higher layers to indicate presence of CBCH channel
on C0/TS0, so the PHY would enable decoding of CBCH messages
on CCCH+SDCCH/4 (case a) in idle mode.
Regarding to CBCH on SDCCH/8 (case b), it makes sense to
extend the 'l1ctl_dm_est_req', so it would be handled in
dedicated mode on request from the higher layers.
Change-Id: Ia94ebf22a2ec439dfe1f31d703b832ae57b48ef2
|
|
According to GSM TS 05.02, section 3.3.5, Cell Broadcast Channel
(CBCH) is a downlink only channel, which is used to carry the
short message service cell broadcast (SMSCB). CBCH is optional,
and uses the same physical channel as SDCCH. More precisely,
CBCH replaces sub-slot number 2 of SDCCH channels when enabled.
This change introduces the CBCH enabled multi-frame layouts,
and two separate logical channel types:
- GSM_PCHAN_CCCH_SDCCH4_CBCH (lchan TRXC_SDCCH4_CBCH),
- GSM_PCHAN_SDCCH8_SACCH8C_CBCH (lchan TRXC_SDCCH8_CBCH).
Both logical channels are separately identified using
the following Osmocom specific cbits:
- TRXC_SDCCH4_CBCH - 0x18 (0b11000),
- TRXC_SDCCH8_CBCH - 0x19 (0b11001).
The reason of this separation is that we somehow need to
distinguish between CBCH on C0/TS0, and CBCH on CX/TS0.
Unlike TRXC_SDCCH8_CBCH, TRXC_SDCCH4_CBCH is enabled
automatically (TRX_CH_FLAG_AUTO), so CBCH messages
can be decoded on C0 while being in idle mode.
Change-Id: Iad9905fc3a8a012ff1ada26ff95af384816f9873
|
|
The 'ccch_mode' enum from 'l1ctl_proto.h' to be extended in the
near future in order to reflect persistence of CBCH. Thus it
should be handled in a switch statement.
Change-Id: I75e3b8deac1da296efb178e65ff6992b5c407b80
|
|
According to GSM TS 08.58, chapter 9.3.1, channel number 0x08
describes sub-slot number 0 of SDCCH/8+ACCH. This is definitely
wrong. In OsmoBTS we use an Osmocom specific extension for packet
switched channels - 0xc0, so let's use it here too.
Change-Id: I11925408d6e63baf1eac880839ecd717843fba6a
|
|
In some conditions it's required to maintain continuous burst
transmission (e.g. on C0). If there is nothing to transmit at
a given moment, either a LAPDm func=UI fill frame,
or a "dummy" Paging Request is used.
In case of 'ccch_scan' application, they are useless.
Let's detect and omit them.
Change-Id: I6ccecb1a78bdac3e467bdc14b7a01afbe17aa53c
|
|
Change-Id: I81d6558525e7f68c4fcd6c6272224d58532e2efb
|
|
Change-Id: Ic88f5d4b263610a376bbb9729e882097393ef2be
|
|
Change-Id: I8c2594920fcad8a3e346b938bd0c20409f4d01c9
|
|
Change-Id: I03da1329501ce9b3c5cca49a1654ba68e9bb6a98
|
|
By definition, 'ccch_scan' application is intended to be used for
monitoring of CCCH channels on C0/TS0. There is no need to send
RACH requests, therefore there is no need to care about the
mobile allocation from SI1 message.
Most likely, this "dead" code was copy-pasted from mobile
application. Let's clean it up!
Change-Id: I7c2f47cbc825a5e5a50863d842729d3d8408b9dd
|
|
According to 3GPP TS 04.08, section 3.4.1, SACCH logical channel
accompanies either a traffic or a signaling channel. It has the
particularity that continuous transmission must occur in both
directions, so on the Uplink direction measurement result messages
are sent at each possible occasion when nothing else has to be sent.
The LAPDm fill frames (0x01, 0x03, 0x01, 0x2b, ...) are not
applicable on SACCH channels!
Unfortunately, 3GPP TS 04.08 doesn't clearly state which "else
messages" besides Measurement Reports can be send by the MS on
SACCH channels. However, in sub-clause 3.4.1 it's stated that
the interval between two successive measurement result messages
shall not exceed one L2 frame.
This change introduces a separate handler for SACCH primitives,
which dequeues a SACCH primitive from transmit queue, if present.
Otherwise it dequeues a cached Measurement Report (the last
received one). Finally, if the cache is empty, a "dummy"
measurement report is used. When it's possible,
a non-MR primitive is prioritized.
Change-Id: If1b8dc74ced746d6270676fdde75fcda32f91a3d
Related: OS#2988
|
|
Change-Id: I553b4cc39b2efd7b60346160c57f01ee4cf066be
|
|
Enforcing pointer to a 'trx_instance' structure is not flexible,
because it is used as parent talloc context only.
Change-Id: I5ab2ef5cea76f955bf72ef54541b3b75cdc2d23f
|
|
Having access to a logical channel state is required by the
follow-up change, which will introduce a separate function
for dequeuing SACCH primitives.
Change-Id: Ibde0acf8e6be224b1007be707a636eaad68c8d36
|
|
Change-Id: I863fb668500b2010dfef7a63217255fd010c06d7
|
|
Change-Id: I02bc581afb5a76c51fdef50ed40e2669c3eb3f2e
|
|
Same as the "network search" VTY command but implemented as primitive
and exposed to LUA.
Change-Id: I096233a2ca9dd7daa358cebed0523cb8c0dbf593
|
|
Add missing dependencies to make this file be includeable as the
only file.
Change-Id: I05b5f689f389b89deb5ff49507486b246111fc59
|
|
This makes packaging the binary for the gsm tester more easy.
Change-Id: Ibe572a4c17871785b623e70acc7f5da056f945e5
|
|
Change-Id: Ibb2a0850692c5ff86b13b820af10b12085589e67
|
|
Unlike xCCH, TCH/H channels are using block diagonal interleaving,
so every single burst carries 57 bits of one traffic frame, and 57
bits of another one. Moreover, unlike TCH/F where both traffic
and FACCH/F frames are interleaved over 8 bursts, a FACCH/H is
interleaved over 6 bursts, while a traffic frame is interleaved
over 4 bursts.
This is why a TCH/H burst transmission can't be initiated on
an arbitrary TDMA frame number. It shall be aligned as of
stated in GSM 05.02, clause 7, table 1.
This change introduces two basic functions:
- sched_tchh_block_map_fn - checks if a TCH/H block transmission
can be initiated / finished on a given frame number
and a given channel type;
- sched_tchh_block_dl_first_fn - calculates TDMA frame number of
the first burst using given frame number of the last burst;
and some auxiliary wrappers to simplify the usage of
sched_tchh_block_map_fn().
Change-Id: Iaf4cb33f1b79df23f8a90c8b14ebe0cd9907fbb9
|
|
The 'normal' math operations, such as addition and substraction,
are not applicable for TDMA frame numbers because they may result
in out-of-range values.
Having TDMA frame math helpers in a single place would allow
one to avoid possible out-of-range result mistakes.
Change-Id: Ibb66ba846cc3d6c2eaa88414569e5f3751128047
|
|
GSM48_CMODE_SIGN means 'signaling only', so we shall not send
bad frame indications in this state. Instead, it makes sense
to send dummy L2 frames like we do for xCCH channels.
Change-Id: Ie39d53522cafab265099076b3194fa96aff217ba
|
|
Change-Id: I88be6088141af6bac8d34844b71193bfef51ad31
|
|
Change-Id: I0e4f18173347e3a7cb875f95d796e8ea20bfc4bf
|
|
Despite the correct range of Timing Advance value is [0..63],
there is a special feature in OsmocomBB which allows one to
simulate the distance between both MS and a BTS by playing
with the signal delay.
This is why a signed 'int8_t' type is used in L1CTL protocol.
No need to limit the range, just forward it to TRX.
Change-Id: I06774b315b8451bf14083da6b2849d6e8594abc8
|
|
Despite the correct range of Timing Advance value is [0..63],
there is a special feature in OsmocomBB which allows one to
simulate the distance between both MS and a BTS by playing
with the signal delay.
It was discovered that l1ctl_tx_param_req() is using an unsigned
'uint8_t' type for Timing Advance value, while other code and
L1CTL protocol is using signed 'int8_t'. This may result in
distortion of negative values, so let's fix this!
Change-Id: I6ee42b5fa2ca9ebe187f0b933465c49f840a55c2
|
|
I am not sure we need the both control commands, as every burst
on DATA interface has a header that includes TX power.
Change-Id: Id14603e71df6dedb5a843bb3e20a320192dbca3d
|
|
Let's differentiate between 'expected' unimplemented messages
like L1CTL_NEIGH_PM_REQ and truly unknonw message types.
Change-Id: Id76993056fb514e6fb0242d505205316c61bb965
|
|
A BSC may allocate a dedicated channel on any ARFCN, not necessary
on the same one where a mobile station has requested this channel.
For some reason, the ARFCN info of L1CTL_DM_EST_REQ message was
not handled by trxcon. Let's fix this.
Related: OS#3526
Change-Id: I16ed5c64236c159bfa39002b05094c1f6c171f6b
|