summaryrefslogtreecommitdiffstats
path: root/src/host/layer23/src/mobile/subscriber.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-18host/mobile: Improved SAP interface integrationЯницкий Ва дим1-0/+53
1) Now the SAP interface is selectable as SIM source using the 'sim sap' command in VTY. 2) SAP connection starts only if it is configured as SIM source. 3) Fixed sap_socket_path configuration r/w errors. Written-by: Яницкий Ва дим <axilirator@gmail.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2014-06-15mobile: Use osmocom auth API instead of direct callsMax1-18/+15
Submitted-by: Max <max.suraev@fairwaves.co> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-01-08misc: Fix typosDario Lombardo1-1/+1
2013-01-07mobile: Allow test card to be maked as already attachedAndreas Eversberg1-2/+8
This way it is possible to use test card without making attachment to the network, if the LAI matches. It can be used to do faster testing.
2012-10-30Fixed decoding of hexadecimal LAI componentsAndreas Eversberg1-6/+9
libosmocore has changed its LAI decoding from hex to decimal. This caused wrong decoding of MCC and MNC. In order to provide required hex transcoding, special hex encoding and decoding function are added to mobile/sysinfo.c.
2012-02-14mobile: Add vty option to force rekeying for every new channelTim Ehlers1-0/+8
Written-by: Tim Ehlers <osmocom@ehlers.info> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2011-11-13host/mobile: Mobile will use SMS Service Center Address from SIMAndreas Eversberg1-14/+51
In case the SMS Service Center Address is not set in the config, the Address from the SIM card is used. The mobile checks if either one is defined, otherwise it will refuse sending SMS. Since records of SIM are read, this patch includes fixes to talk correctly with the SIM client. Written-by: Andreas Eversberg <jolly@eversberg.eu> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2011-07-17[layer23/mobile] Improvement and fixes of idle mode processAndreas Eversberg1-9/+30
This patch introduces cell re-relection. When camping on a cell, it scanns neighbour cells. If a 'better' cell is found, the cell is selected. If the cell is in a different location area, a location upating is performed under certain conditions. The 'better' cell depends on various informations that are broadcasted on the BCCH of a neihbour cell and of course the RX level. Most operators don't set these informations, so the 'better' cell depend on a better RX level for the same location area, or a much better RX level (6 dBm) at a different location area. There were many issues at the idle mode process that has been fixed. Expecially when moving, the state machines got stuck, so no more cell search was possible, or no further calls / location updating was possible. In order to see the process of cell selection, enter the VTY interface and enable the network monitor: enable monitor network 1 (where '1' is the instance of the MS) In order to see the current state of the processes, enter: show ms
2011-07-17[layer23] Detach SIM, if reading failsAndreas Eversberg1-0/+8
This way the mobility management and cell selection process continues as if no SIM has been inserted.
2011-05-02[sim] Fixed path handling in sim client and mobile app.Nico Golde1-1/+1
2011-04-26src: use new libosmogsm and include/osmocom/[gsm|core] path to headersPablo Neira Ayuso1-2/+2
This patch changes include paths to get osmocom-bb working with the current libosmocore tree. Among all these renames, you can notice several tweaks that I added on purpose, and that require some explanation, they are: * hexdump() in osmocon.c and osmoload.c has been renamed to avoid clashing with hexdump() defined in libosmocore. * gsmmap now depends on libosmogsm. Actually I had to cleanup Makefile.am because I was experiencing weird linking problems, probably due to a bug in the autotools. With the change included in this patch, I got it compiled and linked here correctly. This patch has been tested with the phone Motorola C123 and the following images files: * firmware/board/compal_e88/hello_world.compalram.bin * firmware/board/compal_e88/layer1.compalram.bin Using the osmocon, bcch_scan and mobile tools. Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2010-11-20[layer23] Adding LAC and TMSI (both optional) to test card (rplmn)Andreas.Eversberg1-4/+10
2010-09-26[layer23] VTY command for changing LAI on SIM cardAndreas.Eversberg1-0/+4
This speed up network selection process, because no manual network search is required to change a network.
2010-09-19[layer23] Fixed and improved subscriber (SIM) dump of VTYAndreas.Eversberg1-11/+19
For a detailed SIM infos: enable show subscriber
2010-09-19[layer23] Fixed and completed SIM's PIN handlingAndreas.Eversberg1-14/+58
Use VTY to handle PIN: enable sim pin 1 xxxx sim change-pin 1 xxxx yyyy sim disable-pin 1 xxxx sim enable-pin 1 xxxx sim unlock-pin 1 uuuuuuuu yyyy 1 = mobile station "1" xxxx = current PIN yyyy = new PIN uuuuuuuu = unlock key (PuK)
2010-09-18[layer23] SIM client completionAndreas.Eversberg1-10/+22
The SIM client is now complete. Because it usefull for multiple applications, i moved it to the layer23/src/common directory. The SIM reader works together with mobile process. Fixes were made. Thanx to all for testing, finding bugs, and making it work as it is supposed to do. The current version uses special L1CTL messages to send and receive APDUs. This will change in the future, when BTSAP interface is completed. Please note that this client will not work until the layer1 SIM reader fixes and extensions are committed.
2010-09-17layer23/mobile: Fix space/tab indenting in subscriber.cSylvain Munaut1-1/+1
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2010-09-17[layer23] Added XOR and COMP128 encryption to test SIMAndreas.Eversberg1-7/+39
To define/change a key for the test SIM, use the following sequence: conf t ms 1 test-sim ki comp128 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx end write or use: ki xor xx xx xx xx xx xx xx xx xx xx xx xx
2010-08-29[layer23] Fixed security issueAndreas.Eversberg1-3/+4
Authentication must not be performed using SIM client, if different IMSI is used, to protect identity of caller.
2010-08-29[layer23] Fix of corrupt MM event messagesAndreas.Eversberg1-2/+4
2010-08-28[layer23] Layer 3 now uses SIM client to request and update SIM dataAndreas.Eversberg1-42/+788
The SIM reader can be selected via VTY, but because it is not yet implemented in layer1, nothing happens when selecting it.
2010-07-27layer23: Split [2/2] -> The header filesSylvain Munaut1-3/+3
This split the headers and adapt the source. We use osmocom/bb as a prefix because libosomore also uses osmocom and generic names such as misc & common could conflict in the future. Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2010-07-27layer23: Split [1/2] -> The source codeSylvain Munaut1-0/+323
We split into : - common: Everything that can be shared - mobile: The real spec compliant mobile phones - misc: Different test stuff Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 06:51:16 +0000