diff options
Diffstat (limited to 'src/shared/libosmocore/include/osmocom/core/msgb.h')
-rw-r--r-- | src/shared/libosmocore/include/osmocom/core/msgb.h | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/src/shared/libosmocore/include/osmocom/core/msgb.h b/src/shared/libosmocore/include/osmocom/core/msgb.h deleted file mode 100644 index a1939ab6..00000000 --- a/src/shared/libosmocore/include/osmocom/core/msgb.h +++ /dev/null @@ -1,401 +0,0 @@ -#ifndef _MSGB_H -#define _MSGB_H - -/* (C) 2008 by Harald Welte <laforge@gnumonks.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#include <stdint.h> -#include <osmocom/core/linuxlist.h> -#include <osmocom/core/utils.h> - -/*! \defgroup msgb Message buffers - * @{ - */ - -/*! \file msgb.h - * \brief Osmocom message buffers - * The Osmocom message buffers are modelled after the 'struct skb' - * inside the Linux kernel network stack. As they exist in userspace, - * they are much simplified. However, terminology such as headroom, - * tailroom, push/pull/put etc. remains the same. - */ - -#define MSGB_DEBUG - -/*! \brief Osmocom message buffer */ -struct msgb { - struct llist_head list; /*!< \brief linked list header */ - - - /* Part of which TRX logical channel we were received / transmitted */ - /* FIXME: move them into the control buffer */ - union { - void *dst; /*!< \brief reference of origin/destination */ - struct gsm_bts_trx *trx; - }; - struct gsm_lchan *lchan; /*!< \brief logical channel */ - - unsigned char *l1h; /*!< \brief pointer to Layer1 header (if any) */ - unsigned char *l2h; /*!< \brief pointer to A-bis layer 2 header: OML, RSL(RLL), NS */ - unsigned char *l3h; /*!< \brief pointer to Layer 3 header. For OML: FOM; RSL: 04.08; GPRS: BSSGP */ - unsigned char *l4h; /*!< \brief pointer to layer 4 header */ - - unsigned long cb[5]; /*!< \brief control buffer */ - - uint16_t data_len; /*!< \brief length of underlying data array */ - uint16_t len; /*!< \brief length of bytes used in msgb */ - - unsigned char *head; /*!< \brief start of underlying memory buffer */ - unsigned char *tail; /*!< \brief end of message in buffer */ - unsigned char *data; /*!< \brief start of message in buffer */ - unsigned char _data[0]; /*!< \brief optional immediate data array */ -}; - -extern struct msgb *msgb_alloc(uint16_t size, const char *name); -extern void msgb_free(struct msgb *m); -extern void msgb_enqueue(struct llist_head *queue, struct msgb *msg); -extern struct msgb *msgb_dequeue(struct llist_head *queue); -extern void msgb_reset(struct msgb *m); -uint16_t msgb_length(const struct msgb *msg); - -#ifdef MSGB_DEBUG -#include <osmocom/core/panic.h> -#define MSGB_ABORT(msg, fmt, args ...) do { \ - osmo_panic("msgb(%p): " fmt, msg, ## args); \ - } while(0) -#else -#define MSGB_ABORT(msg, fmt, args ...) -#endif - -/*! \brief obtain L1 header of msgb */ -#define msgb_l1(m) ((void *)(m->l1h)) -/*! \brief obtain L2 header of msgb */ -#define msgb_l2(m) ((void *)(m->l2h)) -/*! \brief obtain L3 header of msgb */ -#define msgb_l3(m) ((void *)(m->l3h)) -/*! \brief obtain SMS header of msgb */ -#define msgb_sms(m) ((void *)(m->l4h)) - -/*! \brief determine length of L1 message - * \param[in] msgb message buffer - * \returns size of L1 message in bytes - * - * This function computes the number of bytes between the tail of the - * message and the layer 1 header. - */ -static inline unsigned int msgb_l1len(const struct msgb *msgb) -{ - return msgb->tail - (uint8_t *)msgb_l1(msgb); -} - -/*! \brief determine length of L2 message - * \param[in] msgb message buffer - * \returns size of L2 message in bytes - * - * This function computes the number of bytes between the tail of the - * message and the layer 2 header. - */ -static inline unsigned int msgb_l2len(const struct msgb *msgb) -{ - return msgb->tail - (uint8_t *)msgb_l2(msgb); -} - -/*! \brief determine length of L3 message - * \param[in] msgb message buffer - * \returns size of L3 message in bytes - * - * This function computes the number of bytes between the tail of the - * message and the layer 3 header. - */ -static inline unsigned int msgb_l3len(const struct msgb *msgb) -{ - return msgb->tail - (uint8_t *)msgb_l3(msgb); -} - -/*! \brief determine the length of the header - * \param[in] msgb message buffer - * \returns number of bytes between start of buffer and start of msg - * - * This function computes the length difference between the underlying - * data buffer and the used section of the \a msgb. - */ -static inline unsigned int msgb_headlen(const struct msgb *msgb) -{ - return msgb->len - msgb->data_len; -} - -/*! \brief determine how much tail room is left in msgb - * \param[in] msgb message buffer - * \returns number of bytes remaining at end of msgb - * - * This function computes the amount of octets left in the underlying - * data buffer after the end of the message. - */ -static inline int msgb_tailroom(const struct msgb *msgb) -{ - return (msgb->head + msgb->data_len) - msgb->tail; -} - -/*! \brief determine the amount of headroom in msgb - * \param[in] msgb message buffer - * \returns number of bytes left ahead of message start in msgb - * - * This function computes the amount of bytes left in the underlying - * data buffer before the start of the actual message. - */ -static inline int msgb_headroom(const struct msgb *msgb) -{ - return (msgb->data - msgb->head); -} - -/*! \brief append data to end of message buffer - * \param[in] msgb message buffer - * \param[in] len number of bytes to append to message - * \returns pointer to start of newly-appended data - * - * This function will move the \a tail pointer of the message buffer \a - * len bytes further, thus enlarging the message by \a len bytes. - * - * The return value is a pointer to start of the newly added section at - * the end of the message and can be used for actually filling/copying - * data into it. - */ -static inline unsigned char *msgb_put(struct msgb *msgb, unsigned int len) -{ - unsigned char *tmp = msgb->tail; - if (msgb_tailroom(msgb) < (int) len) - MSGB_ABORT(msgb, "Not enough tailroom msgb_push (%u < %u)\n", - msgb_tailroom(msgb), len); - msgb->tail += len; - msgb->len += len; - return tmp; -} - -/*! \brief append a uint8 value to the end of the message - * \param[in] msgb message buffer - * \param[in] word unsigned 8bit byte to be appended - */ -static inline void msgb_put_u8(struct msgb *msgb, uint8_t word) -{ - uint8_t *space = msgb_put(msgb, 1); - space[0] = word & 0xFF; -} - -/*! \brief append a uint16 value to the end of the message - * \param[in] msgb message buffer - * \param[in] word unsigned 16bit byte to be appended - */ -static inline void msgb_put_u16(struct msgb *msgb, uint16_t word) -{ - uint8_t *space = msgb_put(msgb, 2); - space[0] = word >> 8 & 0xFF; - space[1] = word & 0xFF; -} - -/*! \brief append a uint32 value to the end of the message - * \param[in] msgb message buffer - * \param[in] word unsigned 32bit byte to be appended - */ -static inline void msgb_put_u32(struct msgb *msgb, uint32_t word) -{ - uint8_t *space = msgb_put(msgb, 4); - space[0] = word >> 24 & 0xFF; - space[1] = word >> 16 & 0xFF; - space[2] = word >> 8 & 0xFF; - space[3] = word & 0xFF; -} - -/*! \brief remove data from end of message - * \param[in] msgb message buffer - * \param[in] len number of bytes to remove from end - */ -static inline unsigned char *msgb_get(struct msgb *msgb, unsigned int len) -{ - unsigned char *tmp = msgb->data - len; - if (msgb_length(msgb) < len) - MSGB_ABORT(msgb, "msgb too small to get %u (len %u)\n", - len, msgb_length(msgb)); - msgb->tail -= len; - msgb->len -= len; - return tmp; -} -/*! \brief remove uint8 from end of message - * \param[in] msgb message buffer - * \returns 8bit value taken from end of msgb - */ -static inline uint8_t msgb_get_u8(struct msgb *msgb) -{ - uint8_t *space = msgb_get(msgb, 1); - return space[0]; -} -/*! \brief remove uint16 from end of message - * \param[in] msgb message buffer - * \returns 16bit value taken from end of msgb - */ -static inline uint16_t msgb_get_u16(struct msgb *msgb) -{ - uint8_t *space = msgb_get(msgb, 2); - return space[0] << 8 | space[1]; -} -/*! \brief remove uint32 from end of message - * \param[in] msgb message buffer - * \returns 32bit value taken from end of msgb - */ -static inline uint32_t msgb_get_u32(struct msgb *msgb) -{ - uint8_t *space = msgb_get(msgb, 4); - return space[0] << 24 | space[1] << 16 | space[2] << 8 | space[3]; -} - -/*! \brief prepend (push) some data to start of message - * \param[in] msgb message buffer - * \param[in] len number of bytes to pre-pend - * \returns pointer to newly added portion at start of \a msgb - * - * This function moves the \a data pointer of the \ref msgb further - * to the front (by \a len bytes), thereby enlarging the message by \a - * len bytes. - * - * The return value is a pointer to the newly added section in the - * beginning of the message. It can be used to fill/copy data into it. - */ -static inline unsigned char *msgb_push(struct msgb *msgb, unsigned int len) -{ - if (msgb_headroom(msgb) < (int) len) - MSGB_ABORT(msgb, "Not enough headroom msgb_push (%u < %u)\n", - msgb_headroom(msgb), len); - msgb->data -= len; - msgb->len += len; - return msgb->data; -} -/*! \brief remove (pull) a header from the front of the message buffer - * \param[in] msgb message buffer - * \param[in] len number of octets to be pulled - * \returns pointer to new start of msgb - * - * This function moves the \a data pointer of the \ref msgb further back - * in the message, thereby shrinking the size of the message by \a len - * bytes. - */ -static inline unsigned char *msgb_pull(struct msgb *msgb, unsigned int len) -{ - msgb->len -= len; - return msgb->data += len; -} - -/*! \brief remove uint8 from front of message - * \param[in] msgb message buffer - * \returns 8bit value taken from end of msgb - */ -static inline uint8_t msgb_pull_u8(struct msgb *msgb) -{ - uint8_t *space = msgb_pull(msgb, 1) - 1; - return space[0]; -} -/*! \brief remove uint16 from front of message - * \param[in] msgb message buffer - * \returns 16bit value taken from end of msgb - */ -static inline uint16_t msgb_pull_u16(struct msgb *msgb) -{ - uint8_t *space = msgb_pull(msgb, 2) - 2; - return space[0] << 8 | space[1]; -} -/*! \brief remove uint32 from front of message - * \param[in] msgb message buffer - * \returns 32bit value taken from end of msgb - */ -static inline uint32_t msgb_pull_u32(struct msgb *msgb) -{ - uint8_t *space = msgb_pull(msgb, 4) - 4; - return space[0] << 24 | space[1] << 16 | space[2] << 8 | space[3]; -} - -/*! \brief Increase headroom of empty msgb, reducing the tailroom - * \param[in] msg message buffer - * \param[in] len amount of extra octets to be reserved as headroom - * - * This function reserves some memory at the beginning of the underlying - * data buffer. The idea is to reserve space in case further headers - * have to be pushed to the \ref msgb during further processing. - * - * Calling this function leads to undefined reusults if it is called on - * a non-empty \ref msgb. - */ -static inline void msgb_reserve(struct msgb *msg, int len) -{ - msg->data += len; - msg->tail += len; -} - -/*! \brief Trim the msgb to a given absolute length - * \param[in] msg message buffer - * \param[in] len new total length of buffer - * \returns 0 in case of success, negative in case of error - */ -static inline int msgb_trim(struct msgb *msg, int len) -{ - if (len > msg->data_len) - return -1; - - msg->len = len; - msg->tail = msg->data + len; - - return 0; -} - -/*! \brief Trim the msgb to a given layer3 length - * \pram[in] msg message buffer - * \param[in] l3len new layer3 length - * \returns 0 in case of success, negative in case of error - */ -static inline int msgb_l3trim(struct msgb *msg, int l3len) -{ - return msgb_trim(msg, (msg->l3h - msg->data) + l3len); -} - -/*! \brief Allocate message buffer with specified headroom - * \param[in] size size in bytes, including headroom - * \param[in] headroom headroom in bytes - * \param[in] name human-readable name - * \returns allocated message buffer with specified headroom - * - * This function is a convenience wrapper around \ref msgb_alloc - * followed by \ref msgb_reserve in order to create a new \ref msgb with - * user-specified amount of headroom. - */ -static inline struct msgb *msgb_alloc_headroom(int size, int headroom, - const char *name) -{ - osmo_static_assert(size > headroom, headroom_bigger); - - struct msgb *msg = msgb_alloc(size, name); - if (msg) - msgb_reserve(msg, headroom); - return msg; -} - -/* non inline functions to ease binding */ - -uint8_t *msgb_data(const struct msgb *msg); -void msgb_set_talloc_ctx(void *ctx); - -/*! @} */ - -#endif /* _MSGB_H */ |