diff options
| author | Andreas Eversberg <jolly@eversberg.eu> | 2016-12-09 16:42:19 +0100 |
|---|---|---|
| committer | Andreas Eversberg <jolly@eversberg.eu> | 2016-12-09 16:42:19 +0100 |
| commit | d1c6d6bc72d697c015407a83bd213ab232db8d6b (patch) | |
| tree | 4b99c8975b4753550c66b5efe7c2b51de48ac7b6 /docs/setup.html | |
| parent | 7585f9c22dd0dffdaac8b57b1e370fa901a20df4 (diff) | |
work on docs
Diffstat (limited to 'docs/setup.html')
| -rw-r--r-- | docs/setup.html | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/docs/setup.html b/docs/setup.html index 9ba8353..cae6034 100644 --- a/docs/setup.html +++ b/docs/setup.html @@ -40,7 +40,7 @@ This image shows a two-band amateur radio receiver without limitations for the f <p> I built several transmitters out of modified taxi radios. It features a simple digital PLL (configurable by jumpers) and allows to directly connect the audio signal to the oscillator. -This is highly recommended for the C-Netz, because signaling is done by sifting the carrier directly. +This is highly recommended for the C-Netz, because signaling is done by modulating (shifting) the carrier directly. One unit has a switch to change between A-Netz and B-Netz (2-meter version) and the other units to change between C-Netz and NMT (70-cm version). I added an input to switch between two channels for the B-Netz. (Whenever a B-Netz phone is paged, the channel must be temporarily switched to the paging channel.) @@ -135,7 +135,7 @@ I use 10 K resistor for connecting radio output (discriminator) to microphone in Connect the ground of input and output to one end of the resistor. (shown in the picture as 'Masse') Select this side to which the slider moves, if the knob turned all the way left (or moved all the way down). Connect the input signal ('Signaleingang') to the other end of the resistor. -At least connect the output signal ('Signalausgang') to the slider of the resistor. +Finally connect the output signal ('Signalausgang') to the slider of the resistor. </p> <p> |