diff options
Diffstat (limited to 'bsc/osmo-bsc-vamos.cfg')
-rw-r--r-- | bsc/osmo-bsc-vamos.cfg | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/bsc/osmo-bsc-vamos.cfg b/bsc/osmo-bsc-vamos.cfg new file mode 100644 index 00000000..73cafe7e --- /dev/null +++ b/bsc/osmo-bsc-vamos.cfg @@ -0,0 +1,418 @@ +! +! OsmoBSC (1.0.1.122-630df) configuration saved from vty +!! +password foo +! +log stderr + logging filter all 1 + logging print extended-timestamp 1 + logging print file basename last + logging print category-hex 0 + logging print category 1 + logging print level 1 + logging timestamp 1 + logging color 1 +! + logging level set-all notice + logging level rll notice + logging level mm notice + logging level rr notice + logging level rsl notice + logging level nm info + logging level pag notice + logging level meas notice + logging level msc notice + logging level ho notice + logging level ref notice + logging level ctrl notice + logging level filter debug + logging level pcu debug +! +stats interval 0 +stats reporter statsd + prefix TTCN3 + level subscriber + remote-ip 127.0.0.1 + remote-port 8125 + flush-period 1 + mtu 1024 + enable +! +line vty + no login + bind 127.0.0.1 +! +e1_input + e1_line 0 driver ipa + e1_line 0 port 0 + no e1_line 0 keepalive +cs7 instance 0 + asp asp-clnt-msc-0 2905 1905 m3ua + remote-ip 127.0.0.1 + role asp + sctp-role client + sccp-address msc2 + point-code 0.0.2 + sccp-address msc3 + point-code 0.0.3 +network + network country code 1 + mobile network code 1 + encryption a5 0 1 3 + neci 1 + paging any use tch 0 + handover 1 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + timer t3113 10 + timer t3212 30 + mgw 0 + mgw remote-ip 127.0.0.1 + bts 0 + type osmo-bts + band DCS1800 + cell_identity 0 + location_area_code 1 + dtx uplink force + dtx downlink + base_station_id_code 10 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden + ip.access unit_id 1234 0 + oml ip.access stream_id 255 line 0 + neighbor-list mode manual-si5 + neighbor-list add arfcn 100 + neighbor-list add arfcn 200 + si5 neighbor-list add arfcn 10 + si5 neighbor-list add arfcn 20 + codec-support fr hr efr amr + gprs mode gprs + gprs routing area 0 + gprs network-control-order nc0 + gprs cell bvci 1234 + gprs cell timer blocking-timer 3 + gprs cell timer blocking-retries 3 + gprs cell timer unblocking-retries 3 + gprs cell timer reset-timer 3 + gprs cell timer reset-retries 3 + gprs cell timer suspend-timer 10 + gprs cell timer suspend-retries 3 + gprs cell timer resume-timer 10 + gprs cell timer resume-retries 3 + gprs cell timer capability-update-timer 10 + gprs cell timer capability-update-retries 3 + gprs nsei 1234 + gprs ns timer tns-block 3 + gprs ns timer tns-block-retries 3 + gprs ns timer tns-reset 3 + gprs ns timer tns-reset-retries 3 + gprs ns timer tns-test 30 + gprs ns timer tns-alive 3 + gprs ns timer tns-alive-retries 10 + gprs nsvc 0 nsvci 1234 + gprs nsvc 0 local udp port 23000 + gprs nsvc 0 remote udp port 23000 + gprs nsvc 0 remote ip 192.168.100.239 + gprs nsvc 1 nsvci 0 + gprs nsvc 1 local udp port 0 + gprs nsvc 1 remote udp port 0 + gprs nsvc 1 remote ip 0.0.0.0 + no force-combined-si + si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3 + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4+CBCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + bts 1 + type osmo-bts + band DCS1800 + cell_identity 1 + location_area_code 1 + dtx uplink force + dtx downlink + base_station_id_code 11 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden + ip.access unit_id 1235 0 + oml ip.access stream_id 255 line 0 + neighbor-list mode manual-si5 + neighbor-list add arfcn 100 + neighbor-list add arfcn 200 + si5 neighbor-list add arfcn 10 + si5 neighbor-list add arfcn 20 + codec-support fr hr efr amr + gprs mode gprs + gprs routing area 0 + gprs network-control-order nc0 + gprs cell bvci 1235 + gprs cell timer blocking-timer 3 + gprs cell timer blocking-retries 3 + gprs cell timer unblocking-retries 3 + gprs cell timer reset-timer 3 + gprs cell timer reset-retries 3 + gprs cell timer suspend-timer 10 + gprs cell timer suspend-retries 3 + gprs cell timer resume-timer 10 + gprs cell timer resume-retries 3 + gprs cell timer capability-update-timer 10 + gprs cell timer capability-update-retries 3 + gprs nsei 1235 + gprs ns timer tns-block 3 + gprs ns timer tns-block-retries 3 + gprs ns timer tns-reset 3 + gprs ns timer tns-reset-retries 3 + gprs ns timer tns-test 30 + gprs ns timer tns-alive 3 + gprs ns timer tns-alive-retries 10 + gprs nsvc 0 nsvci 1235 + gprs nsvc 0 local udp port 23000 + gprs nsvc 0 remote udp port 23000 + gprs nsvc 0 remote ip 192.168.100.239 + gprs nsvc 1 nsvci 0 + gprs nsvc 1 local udp port 0 + gprs nsvc 1 remote udp port 0 + gprs nsvc 1 remote ip 0.0.0.0 + no force-combined-si + si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3 + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4+CBCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + bts 2 + type osmo-bts + band DCS1800 + cell_identity 1 + location_area_code 2 + dtx uplink force + dtx downlink + base_station_id_code 12 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden + ip.access unit_id 1236 0 + oml ip.access stream_id 255 line 0 + neighbor-list mode manual-si5 + neighbor-list add arfcn 100 + neighbor-list add arfcn 200 + si5 neighbor-list add arfcn 10 + si5 neighbor-list add arfcn 20 + codec-support fr hr efr amr + gprs mode gprs + gprs routing area 0 + gprs network-control-order nc0 + gprs cell bvci 1236 + gprs cell timer blocking-timer 3 + gprs cell timer blocking-retries 3 + gprs cell timer unblocking-retries 3 + gprs cell timer reset-timer 3 + gprs cell timer reset-retries 3 + gprs cell timer suspend-timer 10 + gprs cell timer suspend-retries 3 + gprs cell timer resume-timer 10 + gprs cell timer resume-retries 3 + gprs cell timer capability-update-timer 10 + gprs cell timer capability-update-retries 3 + gprs nsei 1236 + gprs ns timer tns-block 3 + gprs ns timer tns-block-retries 3 + gprs ns timer tns-reset 3 + gprs ns timer tns-reset-retries 3 + gprs ns timer tns-test 30 + gprs ns timer tns-alive 3 + gprs ns timer tns-alive-retries 10 + gprs nsvc 0 nsvci 1236 + gprs nsvc 0 local udp port 23000 + gprs nsvc 0 remote udp port 23000 + gprs nsvc 0 remote ip 192.168.100.239 + gprs nsvc 1 nsvci 0 + gprs nsvc 1 local udp port 0 + gprs nsvc 1 remote udp port 0 + gprs nsvc 1 remote ip 0.0.0.0 + no force-combined-si + si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3 + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4+CBCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + bts 3 + type osmo-bts + band DCS1800 + cell_identity 3 + location_area_code 3 + # re-use bts 2's ARFCN 871 and BSIC 12 (to test handover config) + base_station_id_code 12 + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + timeslot 1 + phys_chan_config TCH/F + timeslot 2 + phys_chan_config TCH/F + timeslot 3 + phys_chan_config TCH/F + timeslot 4 + phys_chan_config TCH/F + timeslot 5 + phys_chan_config TCH/H + timeslot 6 + phys_chan_config PDCH + timeslot 7 + phys_chan_config PDCH +msc 0 + allow-emergency allow + amr-config 12_2k forbidden + amr-config 10_2k forbidden + amr-config 7_95k forbidden + amr-config 7_40k forbidden + amr-config 6_70k forbidden + amr-config 5_90k allowed + amr-config 5_15k forbidden + amr-config 4_75k forbidden + codec-list fr1 fr2 fr3 hr1 hr3 + lcls-mode mgw-loop +msc 1 + msc-addr msc2 +msc 2 + msc-addr msc3 + +network + nri bitlen 10 + # a NULL NRI that is outside the NRI ranges used by the MSCs: + nri null add 0 + # a NULL NRI that is also used by an MSC: + nri null add 1 +msc 0 + nri add 1 255 +msc 1 + nri add 256 511 +msc 2 + nri add 512 767 + # range 768-1024 is not assigned to any MSC on purpose + +bsc + mid-call-timeout 0 +ctrl + bind 127.0.0.1 +cbc + mode disabled + client + remote-ip 127.0.0.1 + remote-port 48049 + server + local-ip 127.0.0.1 + local-port 48050 +smlc + enable |