diff options
| -rw-r--r-- | multivoltage-uart/mv-uart.brd | 64 |
1 files changed, 34 insertions, 30 deletions
diff --git a/multivoltage-uart/mv-uart.brd b/multivoltage-uart/mv-uart.brd index e49d4ad..c6fc992 100644 --- a/multivoltage-uart/mv-uart.brd +++ b/multivoltage-uart/mv-uart.brd @@ -765,7 +765,7 @@ Copyright: Würth Elektronik</description> <class number="0" name="default" width="0" drill="0"> </class> </classes> -<designrules name="sysmocom-basista-4layer-prototype *"> +<designrules name="SeeedStudio_2layer_DRU_no_angle_20140221 *"> <description language="de"><b>EAGLE Design Rules</b> <p> Die Standard-Design-Rules sind so gewählt, dass sie für @@ -773,31 +773,35 @@ die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab.</description> -<description language="en"><b>sysmocom Design rules for Basista 4-layer prototype</b> +<description language="en"><b>EAGLE Design Rules</b> <p> -Please note that the minimum drill distance is "two times diameter plus 10-20% between the -center of the two drills". This cannot be expressed in EAGLE DRU, but has been computed -for the minimum (VIA) drill of 0.3mm as 0.36mm.</description> +The default Design Rules have been set to cover +a wide range of applications. Your particular design +may have different requirements, so please make the +necessary adjustments and save your customized +design rules under a new name.</description> +<description language="zh"><b>Seeed Studio EAGLE Design Rules</b> +</description> <param name="layerSetup" value="(1*16)"/> -<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/> -<param name="mtIsolate" value="1.55mm 0.55mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.46mm"/> -<param name="mdWireWire" value="0.15mm"/> -<param name="mdWirePad" value="0.15mm"/> -<param name="mdWireVia" value="0.15mm"/> -<param name="mdPadPad" value="0.15mm"/> -<param name="mdPadVia" value="0.15mm"/> -<param name="mdViaVia" value="0.15mm"/> -<param name="mdSmdPad" value="0.15mm"/> -<param name="mdSmdVia" value="0.15mm"/> -<param name="mdSmdSmd" value="0.15mm"/> +<param name="mtCopper" value="0.035mm 0.0175mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.0175mm 0.035mm"/> +<param name="mtIsolate" value="1.5mm 1.1mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/> +<param name="mdWireWire" value="6mil"/> +<param name="mdWirePad" value="6mil"/> +<param name="mdWireVia" value="6mil"/> +<param name="mdPadPad" value="6mil"/> +<param name="mdPadVia" value="6mil"/> +<param name="mdViaVia" value="6mil"/> +<param name="mdSmdPad" value="0mil"/> +<param name="mdSmdVia" value="0mil"/> +<param name="mdSmdSmd" value="0mil"/> <param name="mdViaViaSameLayer" value="8mil"/> <param name="mnLayersViaInSmd" value="2"/> -<param name="mdCopperDimension" value="0.5mm"/> -<param name="mdDrill" value="0.36mm"/> +<param name="mdCopperDimension" value="10mil"/> +<param name="mdDrill" value="10mil"/> <param name="mdSmdStop" value="0mil"/> -<param name="msWidth" value="0.15mm"/> +<param name="msWidth" value="6mil"/> <param name="msDrill" value="0.3mm"/> -<param name="msMicroVia" value="9.99mm"/> +<param name="msMicroVia" value="12mil"/> <param name="msBlindViaRatio" value="0.5"/> <param name="rvPadTop" value="0.25"/> <param name="rvPadInner" value="0.25"/> @@ -806,15 +810,15 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description> <param name="rvViaInner" value="0.25"/> <param name="rvMicroViaOuter" value="0.25"/> <param name="rvMicroViaInner" value="0.25"/> -<param name="rlMinPadTop" value="0.15mm"/> +<param name="rlMinPadTop" value="10mil"/> <param name="rlMaxPadTop" value="20mil"/> -<param name="rlMinPadInner" value="0.15mm"/> +<param name="rlMinPadInner" value="10mil"/> <param name="rlMaxPadInner" value="20mil"/> -<param name="rlMinPadBottom" value="0.15mm"/> +<param name="rlMinPadBottom" value="10mil"/> <param name="rlMaxPadBottom" value="20mil"/> -<param name="rlMinViaOuter" value="0.15mm"/> +<param name="rlMinViaOuter" value="6mil"/> <param name="rlMaxViaOuter" value="20mil"/> -<param name="rlMinViaInner" value="0.15mm"/> +<param name="rlMinViaInner" value="6mil"/> <param name="rlMaxViaInner" value="20mil"/> <param name="rlMinMicroViaOuter" value="4mil"/> <param name="rlMaxMicroViaOuter" value="20mil"/> @@ -822,16 +826,16 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description> <param name="rlMaxMicroViaInner" value="20mil"/> <param name="psTop" value="-1"/> <param name="psBottom" value="-1"/> -<param name="psFirst" value="-1"/> +<param name="psFirst" value="0"/> <param name="psElongationLong" value="100"/> <param name="psElongationOffset" value="100"/> <param name="mvStopFrame" value="1"/> <param name="mvCreamFrame" value="0"/> -<param name="mlMinStopFrame" value="0.15mm"/> -<param name="mlMaxStopFrame" value="0.15mm"/> +<param name="mlMinStopFrame" value="2mil"/> +<param name="mlMaxStopFrame" value="2mil"/> <param name="mlMinCreamFrame" value="0mil"/> <param name="mlMaxCreamFrame" value="0mil"/> -<param name="mlViaStopLimit" value="0mil"/> +<param name="mlViaStopLimit" value="100mil"/> <param name="srRoundness" value="0"/> <param name="srMinRoundness" value="0mil"/> <param name="srMaxRoundness" value="0mil"/> @@ -842,7 +846,7 @@ for the minimum (VIA) drill of 0.3mm as 0.36mm.</description> <param name="checkGrid" value="0"/> <param name="checkAngle" value="0"/> <param name="checkFont" value="1"/> -<param name="checkRestrict" value="1"/> +<param name="checkRestrict" value="0"/> <param name="useDiameter" value="13"/> <param name="maxErrors" value="50"/> </designrules> |