Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I44e251ca2df02e4f1fdfc1492306ec25d0653ef6
|
|
The old command is deprecated since [1] has been merged.
Change-Id: Iac985f373de98206fdfb3196295ebec160189780
Related: [1] Ie6700c4e9d2df1eb5fde1b971e287b62668cc2de
Related: SYS#5324
|
|
MMEs connect over Gn interface using GTPCv1 towards the SGSN in order to
exchange RIM PDUs by using "RAN Information Relay" GTPCv1 message type.
For more info, see 3GPP TS 29.060 sec 7.5.14.1 "RAN Information Relay"
In order to support it, this commit does the following:
* Uses new libgtp APIs to rx and tx RAN Information Relay messages. The
same "gsn" object is reused, ie. the local GTPCv1 socket address used
for exchanging messages against GGSN is reused.
* Adds a new "sgsn_mme_ctx" struct holding information about MMEs
allowed by the SGSN, each one containing information about the GTP
address it uses, the in/out routing based on TAI requests, etc. The
set of MMEs and their config can be set up using new VTY node introduced
in this commit.
* The RIM related code in SGSN is refactored to allow forwarding from
and to several types of addresses/interfaces.
Depends: osmo-ggsn.git Change-Id Iea3eb032ccd4aed5187baca7f7719349d76039d4
Depends: libosmocore.git Change-Id I534db7d8bc5ceb19a2a6866f07d5f5c70e456c5c
Related: SYS#5314
Change-Id: I396450b8d8b66595dab8ff7bf41cbf964bb40d93
|
|
Change-Id: I09b01d2e4bc7b1c17588100b16ac9f04cf72cf99
|
|
Move 'doc' subdir further down to "make sure" the osmo-bsc binary is built
before the docs
Rremove sgsn_vty_reference from the source tree.
In manuals//Makefile.am use the new BUILT_REFERENCE_XML feature recently added
to osmo-gsm-manuals, and add a build target to generate the XML using the new
osmo-sgsn --vty-ref-xml cmdline switch.
Change-Id: Ied75fdd13283aa592350994fb4febce06c213d3a
Depends: I613d692328050a036d05b49a436ab495fc2087ba
|
|
New repository:
https://git.osmocom.org/osmo-gbproxy/
Related: OS#4992
Change-Id: I37f7cebaf2a06bd93627a452f5df44edcfc0f87a
|
|
Change-Id: Ie2ad652c8261ce56cb2ed1a6f16a81486ccdf063
Related: SYS#5115, SYS#5005
|
|
Mostly just change the chapter so it makes sense for gbproxy. Some todos
are still left
Change-Id: I905835c2be7be43fe376fbc9d743107948c7e6d4
Related: SYS#5115, SYS#5005
|
|
Related: SYS#5115, SYS#5005
Change-Id: I930f5df847ea6f40d0ee0c75dd25b6dd20e00839
|
|
Change-Id: I01f8d47f9fa384a2528ddf2e6c936ff28d11409e
Related: SYS#5115, SYS#5005
|
|
Change-Id: I7542ac1d5242f1784146de2df7cecaf70fe93c6c
Related: SYS#5115, SYS#5005
|
|
* Remove mention of features that are no longer supported
* Update the data model
Related: SYS#5115, SYS#5005
Change-Id: Icb9095f4002f2a0a4562fccecae109075cb93c7b
|
|
When there are multiple SGSNs inside a pool, we need to decide
how much of the per-BVC capacity advertised by the BSS in its
BVC-FLOW-CONTROL we should announce to each of the pool members.
A conservative approach would be to advertise 1/num_sgsn, but
there may also be use case where over-provisioning (announcing more
than an equal share of the capacity) is useful.
Hence, let's introduce "pool bvc-flow-control-ratio <1-100>" in order
to allow the administrator to decide.
Related: OS#4891
Change-Id: Ibe5addf657e7237499ca0205bacfe999ecd1e771
|
|
Related: SYS#5005
Change-Id: I383fcd3864a94177f13909c6b8c15648900d3201
|
|
Change-Id: I1af1b154d14de6d6d6fba08f15f167f4b2ed9aa2
Depends: libosmocore.git Change-Id If76a4bd2cc7b3c7adf5d84790a944d78be70e10a
Depends: osmo-gsm-masnuals.git Change-Id Icd75769ef630c3fa985fc5e2154d5521689cdd3c
Related: SYS#4986
|
|
Change-Id: I787bbc254ef10766fe8d480ffd93a16d9926a50e
|
|
Add 'cs7' default configuration, link to the
osmo-gsm-manuals/common/cs7-config.adoc chapter to fully explain the 'cs7'
client configuration.
Related: OS#2767
Depends: Ia2508d4c7b0fef9cdc57e7e122799a480e340bf7 (osmo-gsm-manuals)
Change-Id: If0f7c8fc4b94eb40b62570cf90999d5074dc00ee
|
|
Do not only update the VTY reference and counters of osmo-sgsn, but also
the VTY reference of gbproxy.
This was not possible with the old code path of calling "regen_doc.sh"
inside docker-playground.git, as it expects the program to be updated to
have the same name as the docker image. Using the docker-playground
script also has the disadvantage, that one must push the development
branch to git.osmocom.org before updating the VTY reference/counters,
because that script would build a new docker container with a freshly
cloned repository, check out the same commit that we have already
locally, build that and then finally regenerate the docs.
So instead of adding another parameter for the docker image to the
script in docker-playground.git and calling it twice, simplify the
process by rewriting the regen_doc.sh script in osmo-sgsn.git. Make it
start the locally installed osmo-sgsn and osmo-gbproxy binaries and
call osmo_interact_vty.py on them.
Related: OS#4292
Change-Id: I8b5bd5347ea34266ad650383372630f2a84d5cce
|
|
Depends: (osmo-gsm-manuals) I4dea3e07b88175b2a88e577129360af7ec5f87e1
Related: OS#4292
Change-Id: I24c3ca2fc2446673edceefb797c7d800c3a1a5d2
|
|
Change-Id: I5753ded676951998a1fd76e4d2c2bf3311213f53
|
|
This adds a very basic manual consisting of nothing more than
the common chapters and a high-level description of what it is
all about.
Change-Id: I80d4ea016376c59995ccfcd8685c7c0e86745bd2
|
|
Similar to what we already have in osmo-msc.
Change-Id: Iaa9e1d06dd0430848ef4f7498a3c15d13f899904
|
|
Change-Id: I3a2b84d386f55447e9eed35e59fdc0272e5147d1
Related: OS#1720
|
|
Fix some typos, correct data compression command, add example to turn
off compression.
Change-Id: I6beff8c66eacf12f1081d51dd6b124bdd4478558
Related: OS#1720
|
|
Quite a few features that are listed as not-implemented in the overview
section are actually implemented now.
Change-Id: I8d499a25293b69babc2aebb2d697438f8ba8141f
Related: OS#1720
|
|
Change-Id: Id7245eb1011d1f04d5dfa1503a96d100bc98344c
Related: OS#1700
|
|
Change-Id: I8ee63a3da532285def8de7fe5e90873152adb21e
Related: OS#1700
|
|
Previous commit introduced command "authentication (optional|required)",
which is only meaningful if auth-policy is remote. Upon adding the cmd,
it changed the default logic for remote policy to not require
authentication, which broke TTCN3 tests because sgsn no longer tries to
authenticate the users.
Since it's actually good to enable authentication by default where
possible, let's enable it by default when on auth-policy remote.
In order to do so, let's simply not care about the value of variable
require_authentication if auth_policy is not REMOTE. As a result, we
drop parts of the previous patch and remove unneeded checks (which are
only partially useful based on order of commands during VTY read).
Fixes: 794f446a284ed1ac6d31eb79a8f4c874d66fc34e
Change-Id: Ic707a95af178b44f08809df3d3bc8354bf34273c
|
|
It may be useful to have 'remote' authorization policy, but do not
require authentication in GERAN at the same time, e.g. in combination
with 'subscriber-create-on-demand' feature of OsmoHLR.
This change introduces a new VTY parameter similar to the one
that we already have in OsmoMSC:
authentication (optional|required)
Please note that 'required' only applies if 'auth-policy' is 'remote'.
Change-Id: I9909145e7e0af587c28827e16301a61b13eedaa9
|
|
Change-Id: I3dfe3598055457cc9724a371590e676f1920652b
|
|
I have verified, that the resulting debian packages build in my own OBS
namespace (see the -doc packages):
https://download.opensuse.org/repositories/home:/osmith42/Debian_9.0/all/
https://build.opensuse.org/project/show/home:osmith42
Depends: Ib7251cca9116151e473798879375cd5eb48ff3ad (osmo-ci)
Related: OS#3899
Change-Id: I9c09a0cb5c65fa2e2cd9817edb4656b2a1a35bb9
|
|
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I0477d7c871413bd90b365d3064bac3cba23a0883
|
|
Change-Id: I64d775efa6791aca025d116905e951e10ffa5d04
|
|
... to match the /etc/xml/catalog file on debian (no "www" in hostname)
Change-Id: Id9f3579c7f2bc3af13fe30b5268f249b6f59ed0d
|
|
This is the first update since the libosmocore changes to the 'show
online-help' generated output. Hence the produced document now benefits from
the structural improvements:
- not repeating common commands for every node;
- using section names that match the VTY prompt.
Drop most of the sgsn_vty_additions.xml -- they merely repeat what the online
VTY doc already explains. Many of these more verbose explanations have been
absorbed into the VTY online doc in osmo-sgsn.git change-id
I35984014424412e91437b7ed71576aef3819cb1e.
Adjust remaining sgsn_vty_additions.xml to match the new node ID scheme.
Change-Id: I71863e5056ad369d2055e9882a52a00fa999ab04
|
|
Change-Id: I94cc362a4f52e6bd9f93299665e73dc4fd75a2c6
|
|
Since the NITB split, GSUP is used in all three network elements, so
make the protocol a shared chapter
Change-Id: Id2d7c27ef16eb0ebe5f60d625a1fcf42f1603f4f
|
|
Change-Id: I4c5d5744f961a92bc7c8888ca739d1e8a8a0be9c
|
|
Change-Id: Ib729e2fc4898c20d27e95fc0f13abe9c0656dda5
|
|
Change-Id: I2d8b11496e75abd23a42efab8eabba2b5b0912e9
|
|
Change-Id: I056f278b64ab426b9455b6a667abf2fe7fc94022
|
|
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
|
|
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
|
|
Reserve a new IE for the charging characteristics. We need to handle
them as a GGSN might otherwise reject the PDP context creation. For
the SGSN it is enough to send the two octets as it.
Pick the 0x1X range for the IEs as it is used with the PDP contexts.
Change-Id: I1d7423582e154728a240cf15c32772a06822f4ad
|
|
QoS was supposed to be 13 as 12 has been used for the APN. Fix that
and document the APN.
Change-Id: Ib6113aa7c59841aada424e2cafd94ed88c7badc7
|
|
The arrow style used to desribe the flowcharts in gsup.adoc does not match
the arrow style used in the protocol descriptions which are included from
the common directory (gb.adoc, control_if.adoc, oap.adoc). This patch changes
the arrow style to match the already existing common parts.
Change-Id: I7faa0c97ee3705a64289a47bc63f311d05f988b3
|
|
The does not mention TCP/IP header compression yet. This
commit adds some info about it
Change-Id: I98408e72020a474d378e39263a933eb7567de146
|
|
The explaination of the access policy is a bit unclear. Users
that come from osmo-nitb might have trouble to grasp the functionality
of the access control list based approack correctly.
Change-Id: Iaae3035c4de3cb082f097441eff99289ee6dfc53
|
|
Change-Id: I6585144addd8501226572eda6f55db19d0e31c54
|
|
https://gerrit.osmocom.org/1731
Change-Id: Id33d300c4985be5f2602703a6d4dc83032f0a926
|