diff options
Diffstat (limited to 'OsmoSIPConnector/chapters/configuration.adoc')
| -rw-r--r-- | OsmoSIPConnector/chapters/configuration.adoc | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/OsmoSIPConnector/chapters/configuration.adoc b/OsmoSIPConnector/chapters/configuration.adoc deleted file mode 100644 index 5cd57fa..0000000 --- a/OsmoSIPConnector/chapters/configuration.adoc +++ /dev/null @@ -1,53 +0,0 @@ -== Configuring OsmoSIPConnector - -The configuration of OsmoSIPConnector consists mainly of two parts: -configuring the MNCC interface towards the MSC and configuring the SIP -interface towards the PBX. - -=== Configuring MNCC - -Configuring the MNCC interface is very simple. It has to be pointed to -the same path that OsmoMSC is also using. This means that OsmoMSC and -OsmoSIPConnector need to be running on the same machine or have a shared -directory that supports UNIX domain sockets. - -Note that you need to start `osmo-msc` with the `--mncc-sock` option and point -to the same file that osmo-sip-connector is configured to use. See the OsmoMSC -manual for more information. - -The example config below assumes that OsmoMSC was started with the command -line `osmo-msc -M /tmp/msc_mncc`. - -.Example: MNCC configuration ----- -OsmoSIPcon(config)# mncc -OsmoSIPcon(config-mncc)# socket-path /tmp/msc_mncc ----- - -=== Configuring SIP - -This section covers the SIP configuration. Source and destination IP and port -can be set for the connection to the PBX. - -.Example: SIP configuration ----- -OsmoSIPcon(config)# sip -OsmoSIPcon(config-sip)# local 10.0.0.1 5060 <1> -OsmoSIPcon(config-sip)# remote 10.0.0.2 5060 <2> ----- -<1> The local IP/port to use -<2> The remote SIP IP/port that the PBX uses - -There is also an option to use the IMSI as calling (source) address for -MO- and as called (destination) address for MT-calls. - -.Example: Use IMSI instead of MSISDN ----- -OsmoSIPcon(config)# app -OsmoSIPcon(config-app)# use-imsi <1> ----- -<1> Use the IMSI for MO calling and MT called address - -Since OsmoSIPConnector is just a shim between OsmoMSC and a proper SIP server -this is the extent of the configuration. Setting up a dialplan and other -SIP-related configuration should be done in the actual SIP server. |