1 files changed, 0 insertions, 242 deletions
diff --git a/nuttx/arch/c5471/src/up_irq.c b/nuttx/arch/c5471/src/up_irq.c
deleted file mode 100644
index fabd47b26c..0000000000
--- a/nuttx/arch/c5471/src/up_irq.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/************************************************************
- * up_irq.c
- *
- *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name Gregory Nutt nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ************************************************************/
-
-/************************************************************
- * Included Files
- ************************************************************/
-
-#include <nuttx/config.h>
-#include <sys/types.h>
-#include <nuttx/irq.h>
-#include "c5471.h"
-#include "os_internal.h"
-#include "up_internal.h"
-
-/************************************************************
- * Definitions
- ************************************************************/
-
-#define ILR_EDGESENSITIVE 0x00000020
-#define ILR_PRIORITY      0x0000001E
-
-/************************************************************
- * Public Data
- ************************************************************/
-
-uint32 *current_regs;
-
-/************************************************************
- * Private Data
- ************************************************************/
-
-/* The value of _vflashstart is defined in ld.script.  It
- * could be hard-coded because we know that correct IRAM
- * area is 0xffc00000.
- */
-
-extern int _svectors; /* Type does not matter */
-
-/* The C5471 has FLASH at the low end of memory.  The
- * rrload bootloaer will catch all interrupts and re-vector
- * them to vectors stored in IRAM.  The following table is
- * used to initialize those vectors.
- */
-
-static up_vector_t g_vectorinittab[] =
-{
-  (up_vector_t)NULL,
-  up_vectorundefinsn,
-  up_vectorswi,
-  up_vectorprefetch,
-  up_vectordata,
-  up_vectoraddrexcptn,
-  up_vectorirq,
-  up_vectorfiq
-};
-#define NVECTORS ((sizeof(g_vectorinittab)) / sizeof(up_vector_t))
-
-/************************************************************
- * Private Functions
- ************************************************************/
-
-/************************************************************
- * Name: up_ackirq
- *
- * Description:
- *   Acknowlede the IRQ.Bit 0 of the Interrupt Control
- *   Register ==  New IRQ agreement (NEW_IRQ_AGR). Reset IRQ
- *   output. Clear source IRQ register. Enables a new IRQ
- *   generation. Reset by internal logic.
- *
- ************************************************************/
-
-static inline void up_ackirq(unsigned int irq)
-{
-  uint32 reg;
-  reg = getreg32(SRC_IRQ_REG);              /* Insure appropriate IT_REG bit clears */
-  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
-}
-
-/************************************************************
- * Name: up_ackfiq
- *
- * Description:
- *   Acknowledge the FIQ.  Bit 1 of the Interrupt Control
- *   Register ==  New FIQ agreement (NEW_FIQ_AGR). Reset FIQ
- *   output. Clear source FIQ register. Enables a new FIQ
- *   generation. Reset by internal logic.
- *
- ************************************************************/
-
-static inline void up_ackfiq(unsigned int irq)
-{
-  uint32 reg;
-  reg = getreg32(SRC_FIQ_REG);              /* Insure appropriate IT_REG bit clears */
-  putreg32(reg | 0x00000002, INT_CTRL_REG); /* write the NEW_FIQ_AGR bit. */
-}
-
-/************************************************************
- * Name: up_vectorinitialize
- ************************************************************/
-
-static inline void up_vectorinitialize(void)
-{
-  up_vector_t *src  = g_vectorinittab;
-  up_vector_t *dest = (up_vector_t*)&_svectors;
-  int i;
-
-  for (i = 0; i < NVECTORS; i++)
-    {
-      *dest++ = *src++;
-    }
-}
-
-/************************************************************
- * Public Funtions
- ************************************************************/
-
-/************************************************************
- * Name: up_irqinitialize
- ************************************************************/
-
-void up_irqinitialize(void)
-{
-  /* Disable all interrupts. */
-
-  putreg32(0x0000ffff, MASK_IT_REG);
-
-  /* Clear any pending interrupts */
-
-  up_ackirq(0);
-  up_ackfiq(0);
-  putreg32(0x00000000, IT_REG);
-
-  /* Override hardware defaults */
-
-  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ2_REG);
-  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ4_REG);
-  putreg32(ILR_PRIORITY,                     ILR_IRQ6_REG);
-  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ15_REG);
-
-  /* Initialize hardware interrupt vectors */
-
-  up_vectorinitialize();
-  current_regs = NULL;
-
-  /* And finally, enable interrupts */
-
-#ifndef CONFIG_SUPPRESS_INTERRUPTS
-  irqrestore(SVC_MODE | F_BIT);
-#endif
-}
-
-/************************************************************
- * Name: up_disable_irq
- *
- * Description:
- *   Disable the IRQ specified by 'irq'
- *
- ************************************************************/
-
-void up_disable_irq(int irq)
-{
-  if ((unsigned)irq < NR_IRQS)
-    {
-      uint32 reg = getreg32(MASK_IT_REG);
-      putreg32(reg | (1 << irq), MASK_IT_REG);
-    }
-}
-
-/************************************************************
- * Name: up_enable_irq
- *
- * Description:
- *   Enable the IRQ specified by 'irq'
- *
- ************************************************************/
-
-void up_enable_irq(int irq)
-{
-  if ((unsigned)irq < NR_IRQS)
-    {
-      uint32 reg = getreg32(MASK_IT_REG);
-      putreg32(reg & ~(1 << irq), MASK_IT_REG);
-    }
-}
-
-/************************************************************
- * Name: up_maskack_irq
- *
- * Description:
- *   Mask the IRQ and acknowledge it
- *
- ************************************************************/
-
-void up_maskack_irq(int irq)
-{
-  uint32 reg = getreg32(INT_CTRL_REG);
-
-  /* Mask the interrupt */
-
-  reg = getreg32(MASK_IT_REG);
-  putreg32(reg | (1 << irq), MASK_IT_REG);
-
-  /* Set the NEW_IRQ_AGR bit.  This clears the IRQ src register
-   * enables generation of a new IRQ.
-   */
-
-  reg = getreg32(INT_CTRL_REG);
-  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
-}