The content for uIP web server demo is no longer canned, but is not built dynameically (Thanks to Max Holtzberg)

git-svn-id: https://nuttx.svn.sourceforge.net/svnroot/nuttx/trunk@5073 7fd9a85b-ad96-42d3-883c-3090e2eb8679

21 files changed, 1183 insertions, 873 deletions

diff --git a/nuttx/configs/stm3240g-eval/README.txt b/nuttx/configs/stm3240g-eval/README.txt
index 907c8e199d..15e8b9f3d1 100755
--- a/nuttx/configs/stm3240g-eval/README.txt
+++ b/nuttx/configs/stm3240g-eval/README.txt
@@ -370,7 +370,7 @@ There are two version of the FPU support built into the STM32 port.
    CONFIG_ARCH_FPU=y
    CONFIG_ARMV7M_CMNVECTOR=y
 
-   You will probably also changes to the ld.script in if this option is selected.
+   You will probably also changes to the scripts/ld.script in if this option is selected.
    This should work:
 
    -ENTRY(_stext)
diff --git a/nuttx/configs/stm3240g-eval/dhcpd/Make.defs b/nuttx/configs/stm3240g-eval/dhcpd/Make.defs
index e1c06d5143..8ce21b7bca 100644
--- a/nuttx/configs/stm3240g-eval/dhcpd/Make.defs
+++ b/nuttx/configs/stm3240g-eval/dhcpd/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nettest/Make.defs b/nuttx/configs/stm3240g-eval/nettest/Make.defs
index 5063f511c2..032bcc48ca 100644
--- a/nuttx/configs/stm3240g-eval/nettest/Make.defs
+++ b/nuttx/configs/stm3240g-eval/nettest/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nettest/ld.script b/nuttx/configs/stm3240g-eval/nettest/ld.script
deleted file mode 100644
index fea4d6b95a..0000000000
--- a/nuttx/configs/stm3240g-eval/nettest/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/nettest/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/nsh/Make.defs b/nuttx/configs/stm3240g-eval/nsh/Make.defs
index af9b9a8cb9..dd928ff35e 100644
--- a/nuttx/configs/stm3240g-eval/nsh/Make.defs
+++ b/nuttx/configs/stm3240g-eval/nsh/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nsh/ld.script b/nuttx/configs/stm3240g-eval/nsh/ld.script
deleted file mode 100644
index 750030989f..0000000000
--- a/nuttx/configs/stm3240g-eval/nsh/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/nsh/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/nsh2/Make.defs b/nuttx/configs/stm3240g-eval/nsh2/Make.defs
index ef5f2f5686..f2a9daf347 100644
--- a/nuttx/configs/stm3240g-eval/nsh2/Make.defs
+++ b/nuttx/configs/stm3240g-eval/nsh2/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nsh2/ld.script b/nuttx/configs/stm3240g-eval/nsh2/ld.script
deleted file mode 100644
index b3b6b5601a..0000000000
--- a/nuttx/configs/stm3240g-eval/nsh2/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/nsh2/ld.script
- *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/nxconsole/Make.defs b/nuttx/configs/stm3240g-eval/nxconsole/Make.defs
index 4f66b1c9fa..49a50f9dba 100644
--- a/nuttx/configs/stm3240g-eval/nxconsole/Make.defs
+++ b/nuttx/configs/stm3240g-eval/nxconsole/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxconsole/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nxconsole/ld.script b/nuttx/configs/stm3240g-eval/nxconsole/ld.script
deleted file mode 100644
index e1b92d140d..0000000000
--- a/nuttx/configs/stm3240g-eval/nxconsole/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/nxconsole/ld.script
- *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/nxwm/Make.defs b/nuttx/configs/stm3240g-eval/nxwm/Make.defs
index 9d110ef195..2fdbf70a1f 100644
--- a/nuttx/configs/stm3240g-eval/nxwm/Make.defs
+++ b/nuttx/configs/stm3240g-eval/nxwm/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxwm/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxwm/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/nxwm/ld.script b/nuttx/configs/stm3240g-eval/nxwm/ld.script
deleted file mode 100644
index e63cf55ca6..0000000000
--- a/nuttx/configs/stm3240g-eval/nxwm/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/nxwm/ld.script
- *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/ostest/Make.defs b/nuttx/configs/stm3240g-eval/ostest/Make.defs
index b854fac0e9..46d35b8974 100644
--- a/nuttx/configs/stm3240g-eval/ostest/Make.defs
+++ b/nuttx/configs/stm3240g-eval/ostest/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/ostest/ld.script b/nuttx/configs/stm3240g-eval/ostest/ld.script
deleted file mode 100644
index 97b0240a55..0000000000
--- a/nuttx/configs/stm3240g-eval/ostest/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/ostest/ld.script
- *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/dhcpd/ld.script b/nuttx/configs/stm3240g-eval/scripts/ld.script
index fb461a8046..078f2890f4 100644
--- a/nuttx/configs/stm3240g-eval/dhcpd/ld.script
+++ b/nuttx/configs/stm3240g-eval/scripts/ld.script
@@ -1,7 +1,7 @@
 /****************************************************************************
- * configs/stm3240g-eval/dhcpd/ld.script
+ * configs/stm3240g-eval/scripts/ld.script
  *
- *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
diff --git a/nuttx/configs/stm3240g-eval/telnetd/Make.defs b/nuttx/configs/stm3240g-eval/telnetd/Make.defs
index ccad685f0b..9ed3fcb830 100644
--- a/nuttx/configs/stm3240g-eval/telnetd/Make.defs
+++ b/nuttx/configs/stm3240g-eval/telnetd/Make.defs
@@ -105,14 +105,14 @@ ifeq ($(WINTOOL),y)
   MKDEP = $(TOPDIR)/tools/mknulldeps.sh
   ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
   ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
-  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT)}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
   MAXOPTIMIZATION = -O2
 else
   # Linux/Cygwin-native toolchain 
   MKDEP = $(TOPDIR)/tools/mkdeps.sh
   ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
   ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
-  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT)
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
 endif
 
 CC = $(CROSSDEV)gcc
diff --git a/nuttx/configs/stm3240g-eval/telnetd/ld.script b/nuttx/configs/stm3240g-eval/telnetd/ld.script
deleted file mode 100644
index ee14f4bfb5..0000000000
--- a/nuttx/configs/stm3240g-eval/telnetd/ld.script
+++ /dev/null
@@ -1,122 +0,0 @@
-/****************************************************************************
- * configs/stm3240g-eval/telnetd/ld.script
- *
- *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
- *   Author: Gregory Nutt <gnutt@nuttx.org>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
- * 192Kb of SRAM. SRAM is split up into three blocks:
- *
- * 1) 112Kb of SRAM beginning at address 0x2000:0000
- * 2)  16Kb of SRAM beginning at address 0x2001:c000
- * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
- *
- * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
- * where the code expects to begin execution by jumping to the entry point in
- * the 0x0800:0000 address
- * range.
- */
-
-MEMORY
-{
-    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
-    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
-}
-
-OUTPUT_ARCH(arm)
-ENTRY(_stext)
-SECTIONS
-{
-	.text : {
-		_stext = ABSOLUTE(.);
-		*(.vectors)
-		*(.text .text.*)        
-		*(.fixup)
-		*(.gnu.warning)
-		*(.rodata .rodata.*)        
-		*(.gnu.linkonce.t.*)
-		*(.glue_7)
-		*(.glue_7t)
-		*(.got)
-		*(.gcc_except_table)
-		*(.gnu.linkonce.r.*)
-		_etext = ABSOLUTE(.);
-	} > flash
-
-	.init_section : {
-		_sinit = ABSOLUTE(.);
-		*(.init_array .init_array.*)
-		_einit = ABSOLUTE(.);
-	} > flash
-
-	__exidx_start = ABSOLUTE(.);
-	.ARM.exidx : {
-		*(.ARM.exidx*)
-	} > flash
-	__exidx_end = ABSOLUTE(.);
-
-	_eronly = ABSOLUTE(.);
-
-	.data : {
-		_sdata = ABSOLUTE(.);
-		*(.data .data.*)
-		*(.gnu.linkonce.d.*)
-		CONSTRUCTORS
-		_edata = ABSOLUTE(.);
-	} > sram AT > flash
-
-	.ARM.extab : {
-		*(.ARM.extab*)
-	} >sram
-
-	.bss : {
-		_sbss = ABSOLUTE(.);
-		*(.bss .bss.*)
-		*(.gnu.linkonce.b.*)
-		*(COMMON)
-		_ebss = ABSOLUTE(.);
-	} > sram
-
-	/* Stabs debugging sections. */
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
-	.comment 0 : { *(.comment) }
-	.debug_abbrev 0 : { *(.debug_abbrev) }
-	.debug_info 0 : { *(.debug_info) }
-	.debug_line 0 : { *(.debug_line) }
-	.debug_pubnames 0 : { *(.debug_pubnames) }
-	.debug_aranges 0 : { *(.debug_aranges) }
-}
diff --git a/nuttx/configs/stm3240g-eval/webserver/Make.defs b/nuttx/configs/stm3240g-eval/webserver/Make.defs
new file mode 100644
index 0000000000..460a5e22a8
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/webserver/Make.defs
@@ -0,0 +1,197 @@
+############################################################################
+# configs/stm3240g-eval/webserver/Make.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
+  # CodeSourcery under Windows
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
+  # CodeSourcery under Linux
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+  MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y)
+  # Atollic toolchain under Windows
+  CROSSDEV = arm-atollic-eabi-
+  ARCROSSDEV =
+  WINTOOL = y
+ifeq ($(CONFIG_ARCH_FPU),y)
+  ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+else
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+endif
+ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y)
+  # Atollic toolchain under Windows
+  CROSSDEV = arm-atollic-eabi-
+  ARCROSSDEV = arm-atollic-eabi-
+  WINTOOL = y
+ifeq ($(CONFIG_ARCH_FPU),y)
+  ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+else
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+endif
+ifeq ($(CONFIG_STM32_DEVKITARM),y)
+  # devkitARM under Windows
+  CROSSDEV = arm-eabi-
+  ARCROSSDEV = arm-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_RAISONANCE),y)
+  # Raisonance RIDE7 under Windows
+  CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_BUILDROOT),y)
+  # NuttX buildroot under Linux or Cygwin
+  CROSSDEV = arm-elf-
+  ARCROSSDEV = arm-elf-
+  ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+  MAXOPTIMIZATION = -Os
+endif
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/stm3240g-eval/webserver/appconfig b/nuttx/configs/stm3240g-eval/webserver/appconfig
new file mode 100644
index 0000000000..cfd913b53e
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/webserver/appconfig
@@ -0,0 +1,38 @@
+############################################################################
+# configs/stm3240g-eval/webserver/appconfig
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+CONFIGURED_APPS += examples/uip
+CONFIGURED_APPS += netutils/uiplib
+CONFIGURED_APPS += netutils/webserver
diff --git a/nuttx/configs/stm3240g-eval/webserver/defconfig b/nuttx/configs/stm3240g-eval/webserver/defconfig
new file mode 100644
index 0000000000..0a625f93f0
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/webserver/defconfig
@@ -0,0 +1,854 @@
+############################################################################
+# configs/stm3240g-eval/webserver/defconfig
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture Selection
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32F407IG=y
+CONFIG_ARCH_BOARD="stm3240g-eval"
+CONFIG_ARCH_BOARD_STM3240G_EVAL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DRAM_SIZE=0x00030000
+CONFIG_DRAM_START=0x20000000
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_FPU=n
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_STM32_CODESOURCERYW=n
+CONFIG_STM32_CODESOURCERYL=y
+CONFIG_STM32_ATOLLIC_LITE=n
+CONFIG_STM32_ATOLLIC_PRO=n
+CONFIG_STM32_DEVKITARM=n
+CONFIG_STM32_RAISONANCE=n
+CONFIG_STM32_BUILDROOT=n
+
+#
+# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
+#
+CONFIG_STM32_DFU=n
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
+CONFIG_STM32_JTAG_SW_ENABLE=n
+
+#
+# On-chip CCM SRAM configuration
+#
+
+#
+# On-board FSMC SRAM configuration
+#
+CONFIG_STM32_FSMC_SRAM=y
+CONFIG_HEAP2_BASE=0x64000000
+CONFIG_HEAP2_END=0x64200000
+  
+#
+# Individual subsystems can be enabled:
+#
+# AHB1:
+CONFIG_STM32_CRC=n
+CONFIG_STM32_BKPSRAM=n
+CONFIG_STM32_CCMDATARAM=n
+CONFIG_STM32_DMA1=n
+CONFIG_STM32_DMA2=n
+CONFIG_STM32_ETHMAC=y
+CONFIG_STM32_OTGHS=n
+# AHB2:
+CONFIG_STM32_DCMI=n
+CONFIG_STM32_CRYP=n
+CONFIG_STM32_HASH=n
+CONFIG_STM32_RNG=n
+CONFIG_STM32_OTGFS=n
+# AHB3:
+CONFIG_STM32_FSMC=n
+# APB1:
+CONFIG_STM32_TIM2=n
+CONFIG_STM32_TIM3=n
+CONFIG_STM32_TIM4=n
+CONFIG_STM32_TIM5=n
+CONFIG_STM32_TIM6=n
+CONFIG_STM32_TIM7=n
+CONFIG_STM32_TIM12=n
+CONFIG_STM32_TIM13=n
+CONFIG_STM32_TIM14=n
+CONFIG_STM32_WWDG=n
+CONFIG_STM32_IWDG=n
+CONFIG_STM32_SPI2=n
+CONFIG_STM32_SPI3=n
+CONFIG_STM32_USART2=n
+CONFIG_STM32_USART3=y
+CONFIG_STM32_UART4=n
+CONFIG_STM32_UART5=n
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=n
+CONFIG_STM32_I2C3=n
+CONFIG_STM32_CAN1=n
+CONFIG_STM32_CAN2=n
+CONFIG_STM32_DAC=n
+CONFIG_STM32_PWR=y
+# APB2:
+CONFIG_STM32_TIM1=n
+CONFIG_STM32_TIM8=n
+CONFIG_STM32_USART1=n
+CONFIG_STM32_USART6=n
+CONFIG_STM32_ADC1=n
+CONFIG_STM32_ADC2=n
+CONFIG_STM32_ADC3=n
+CONFIG_STM32_SDIO=n
+CONFIG_STM32_SPI1=n
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM9=n
+CONFIG_STM32_TIM10=n
+CONFIG_STM32_TIM11=n
+
+#
+# STM32F40xxx specific serial device driver settings
+#
+CONFIG_USART1_SERIAL_CONSOLE=n
+CONFIG_USART2_SERIAL_CONSOLE=n
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART4_SERIAL_CONSOLE=n
+CONFIG_USART5_SERIAL_CONSOLE=n
+
+CONFIG_USART1_TXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART3_TXBUFSIZE=128
+CONFIG_USART4_TXBUFSIZE=128
+CONFIG_USART5_TXBUFSIZE=128
+
+CONFIG_USART1_RXBUFSIZE=128
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART3_RXBUFSIZE=128
+CONFIG_USART4_RXBUFSIZE=128
+CONFIG_USART5_RXBUFSIZE=128
+
+CONFIG_USART1_BAUD=115200
+CONFIG_USART2_BAUD=115200
+CONFIG_USART3_BAUD=115200
+CONFIG_USART4_BAUD=115200
+CONFIG_USART5_BAUD=115200
+
+CONFIG_USART1_BITS=8
+CONFIG_USART2_BITS=8
+CONFIG_USART3_BITS=8
+CONFIG_USART4_BITS=8
+CONFIG_USART5_BITS=8
+
+CONFIG_USART1_PARITY=0
+CONFIG_USART2_PARITY=0
+CONFIG_USART3_PARITY=0
+CONFIG_USART4_PARITY=0
+CONFIG_USART5_PARITY=0
+
+CONFIG_USART1_2STOP=0
+CONFIG_USART2_2STOP=0
+CONFIG_USART3_2STOP=0
+CONFIG_USART4_2STOP=0
+CONFIG_USART5_2STOP=0
+
+#
+# STM32F40xxx specific SSI device driver settings
+#
+CONFIG_SSI0_DISABLE=n
+CONFIG_SSI1_DISABLE=y
+CONFIG_SSI_POLLWAIT=y
+#CONFIG_SSI_TXLIMIT=4
+
+#
+# STM32F40xxx specific CAN device driver settings
+#
+CONFIG_CAN=n
+CONFIG_CAN_EXTID=n
+#CONFIG_CAN_FIFOSIZE
+#CONFIG_CAN_NPENDINGRTR
+CONFIG_CAN_LOOPBACK=n
+CONFIG_CAN1_BAUD=700000
+CONFIG_CAN2_BAUD=700000
+
+#
+# STM32F40xxx Ethernet device driver settings
+#
+CONFIG_STM32_PHYADDR=0x01
+CONFIG_STM32_MII=y
+CONFIG_STM32_MII_MCO1=y
+CONFIG_STM32_MII_MCO2=n
+CONFIG_STM32_RMII=n
+CONFIG_STM32_AUTONEG=y
+#CONFIG_STM32_ETHFD
+#CONFIG_STM32_ETH100MB
+CONFIG_STM32_PHYSR=16
+CONFIG_STM32_PHYSR_SPEED=0x0002
+CONFIG_STM32_PHYSR_100MBPS=0x0000
+CONFIG_STM32_PHYSR_MODE=0x0004
+CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
+CONFIG_STM32_ETH_PTP=n
+CONFIG_STM32_ETHMAC_REGDEBUG=n
+
+#
+# I2C configuration
+#
+CONFIG_I2C=y
+CONFIG_I2C_POLLED=y
+CONFIG_I2C_TRANSFER=y
+CONFIG_I2C_TRACE=n
+
+#
+# ADC configuration
+#
+# Enable ADC driver support.  The STM3240G-EVAL has a 10 Kohm potentiometer
+# RV1 connected to PF9 of STM32F407IGH6 on the board: TIM14_CH1/ SMC_CD/ADC3_IN7
+#
+CONFIG_ADC=n
+#CONFIG_STM32_TIM1_ADC=y
+CONFIG_STM32_TIM1_ADC3=y
+CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100
+
+#
+# PWM configuration
+#
+# The STM3240G-Eval has no real on-board PWM devices, but the board can be configured to output
+# a pulse train using several options (see board.h).  Here the default setup is for TIM8, CH4.
+# Don't forget to enable CONFIG_PWM and CONFIG_STM32_TIM8.
+#
+CONFIG_PWM=n
+CONFIG_PWM_PULSECOUNT=y
+CONFIG_STM32_TIM8_PWM=y
+CONFIG_STM32_TIM8_CHANNEL=4
+
+#
+# General build options
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+CONFIG_USER_ENTRYPOINT="uip_main"
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_FS=n
+CONFIG_DEBUG_GRAPHICS=n
+CONFIG_DEBUG_LCD=n
+CONFIG_DEBUG_USB=n
+CONFIG_DEBUG_NET=n
+CONFIG_DEBUG_RTC=n
+CONFIG_DEBUG_ANALOG=n
+CONFIG_DEBUG_PWM=n
+CONFIG_DEBUG_CAN=n
+CONFIG_DEBUG_I2C=n
+CONFIG_DEBUG_INPUT=n
+
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=50000
+CONFIG_SCHED_WORKSTACKSIZE=2048
+CONFIG_SIG_SIGWORK=4
+CONFIG_SCHED_WAITPID=y
+CONFIG_SCHED_ATEXIT=n
+
+#
+# System Logging
+#
+
+CONFIG_SYSLOG=n
+CONFIG_RAMLOG=n
+CONFIG_RAMLOG_CONSOLE=n
+CONFIG_RAMLOG_SYSLOG=n
+#CONFIG_RAMLOG_NPOLLWAITERS
+#CONFIG_RAMLOG_CONSOLE_BUFSIZE
+
+#
+# Settings for NXFLAT
+#
+CONFIG_NXFLAT=n
+CONFIG_NXFLAT_DUMPBUFFER=n
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Framebuffer driver options
+#
+CONFIG_FB_CMAP=n
+CONFIG_FB_HWCURSOR=n
+CONFIG_FB_HWCURSORIMAGE=n
+#CONFIG_FB_HWCURSORSIZE
+#CONFIG_FB_TRANSPARENCY
+
+#
+# Filesystem configuration
+#
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# STM32 SDIO-based MMC/SD driver
+#
+CONFIG_SDIO_DMA=n
+#CONFIG_SDIO_PRI=128
+#CONFIG_SDIO_DMAPRIO
+#CONFIG_SDIO_WIDTH_D1_ONLY
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+#
+CONFIG_NET=y
+CONFIG_NET_NOINTS=n
+CONFIG_NET_MULTIBUFFER=y
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=10
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=562
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=40
+#CONFIG_NET_TCP_READAHEAD_BUFSIZE
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_ARP_IPIN=n
+CONFIG_NET_MULTICAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# FTP Server
+#
+CONFIG_FTPD_CMDBUFFERSIZE=2048
+
+#
+# RTC Configuration
+#
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+CONFIG_RTC_HIRES=n
+CONFIG_RTC_FREQUENCY=n
+CONFIG_RTC_ALARM=n
+
+#
+# Input device configuration
+#
+CONFIG_INPUT=n
+CONFIG_INPUT_TSC2007=n
+
+#
+# STMPE811 input device configuration
+#
+# Prerequisites:  CONFIG_INPUT=y
+# Other settings that effect the driver: CONFIG_DISABLE_POLL
+#
+CONFIG_INPUT_STMPE811=n
+CONFIG_STMPE811_SPI=n
+CONFIG_STMPE811_I2C=y
+CONFIG_STMPE811_MULTIPLE=y
+CONFIG_STMPE811_ACTIVELOW=y
+CONFIG_STMPE811_EDGE=y
+#CONFIG_STMPE811_NPOLLWAITERS
+CONFIG_STMPE811_TSC_DISABLE=n
+CONFIG_STMPE811_ADC_DISABLE=y
+CONFIG_STMPE811_GPIO_DISABLE=y
+CONFIG_STMPE811_GPIOINT_DISABLE=y
+CONFIG_STMPE811_SWAPXY=y
+CONFIG_STMPE811_TEMP_DISABLE=y
+CONFIG_STMPE811_REGDEBUG=n
+CONFIG_STMPE811_THRESHX=26
+CONFIG_STMPE811_THRESHY=34
+
+#
+# STM32 USB OTG FS Device Configuration
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# STM32 USB OTG FS Host Configuration
+#
+CONFIG_USBHOST=n
+#CONFIG_STM32_OTGFS_RXFIFO_SIZE
+#CONFIG_STM32_OTGFS_NPTXFIFO_SIZE
+#CONFIG_STM32_OTGFS_PTXFIFO_SIZE
+#CONFIG_STM32_OTGFS_DESCSIZE
+CONFIG_STM32_OTGFS_SOFINTR=n
+CONFIG_STM32_USBHOST_REGDEBUG=n
+CONFIG_STM32_USBHOST_PKTDUMP=n
+
+#
+# USB Serial Device Configuration
+#
+CONFIG_PL2303=n
+CONFIG_PL2303_EPINTIN=1
+CONFIG_PL2303_EPBULKOUT=2
+CONFIG_PL2303_EPBULKIN=3
+CONFIG_PL2303_NWRREQS=4
+CONFIG_PL2303_NRDREQS=4
+CONFIG_PL2303_VENDORID=0x067b
+CONFIG_PL2303_PRODUCTID=0x2303
+CONFIG_PL2303_VENDORSTR="Nuttx"
+CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
+CONFIG_PL2303_RXBUFSIZE=512
+CONFIG_PL2303_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+
+#
+# Graphics related configuration settings
+#
+CONFIG_NX=n
+CONFIG_NX_MULTIUSER=n
+CONFIG_NX_NPLANES=1
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+CONFIG_NX_DISABLE_16BPP=n
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=y
+CONFIG_NX_PACKEDMSFIRST=n
+CONFIG_NX_LCDDRIVER=y
+CONFIG_LCD_MAXPOWER=1
+CONFIG_LCD_MAXCONTRAST=1
+CONFIG_NX_MOUSE=y
+CONFIG_NX_KBD=y
+#CONFIG_NXTK_BORDERWIDTH=4
+CONFIG_NXTK_BORDERCOLOR1=0xd69a
+CONFIG_NXTK_BORDERCOLOR2=0xad55
+CONFIG_NXTK_AUTORAISE=n
+CONFIG_NXFONT_SANS17X22=y
+CONFIG_NXFONT_SANS20X26=n
+CONFIG_NXFONT_SANS22X29=n
+CONFIG_NXFONT_SANS23X27=n
+CONFIG_NXFONT_SANS28X37=n
+CONFIG_NXFONT_SANS17X23B=n
+CONFIG_NXFONT_SANS20X27B=y
+CONFIG_NXFONT_SANS22X29B=y
+CONFIG_NXFONT_SANS28X37B=n
+CONFIG_NXFONT_SANS40X49B=n
+CONFIG_NXFONT_SERIF22X29=n
+CONFIG_NXFONT_SERIF29X37=n
+CONFIG_NXFONT_SERIF38X48=n
+CONFIG_NXFONT_SERIF22X28B=n
+CONFIG_NXFONT_SERIF27X38B=n
+CONFIG_NXFONT_SERIF38X49B=n
+CONFIG_NXFONTS_CHARBITS=7
+CONFIG_NX_BLOCKING=y
+CONFIG_NX_MXSERVERMSGS=32
+CONFIG_NX_MXCLIENTMSGS=16
+
+#
+# NxConsole Configuration Settings:
+#
+CONFIG_NXCONSOLE=n
+CONFIG_NXCONSOLE_BPP=16
+CONFIG_NXCONSOLE_MXCHARS=256
+CONFIG_NXCONSOLE_CACHESIZE=32
+#
+
+#
+# STM3240G-EVAL LCD Hardware Configuration
+#
+CONFIG_LCD_NOGETRUN=y
+CONFIG_LCD_LANDSCAPE=n
+CONFIG_LCD_RLANDSCAPE=n
+CONFIG_LCD_PORTRAIT=n
+CONFIG_LCD_RPORTRAIT=y
+
+#
+# STM3240G-EVAL specific LCD settings
+#
+CONFIG_STM32_ILI9320_DISABLE=n
+CONFIG_STM32_ILI9325_DISABLE=n
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=0xc0a80232
+CONFIG_EXAMPLE_UIP_DRIPADDR=0xc0a80201
+CONFIG_EXAMPLE_UIP_NETMASK=0xffffff00
+CONFIG_EXAMPLE_UIP_NOMAC=y
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=0x0a000002
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=0x0a000001
+CONFIG_EXAMPLE_NETTEST_NETMASK=0xffffff00
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=0x0a000001
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=y
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# I2C tool settings
+#
+CONFIG_I2CTOOL_BUILTIN=y
+CONFIG_I2CTOOL_MINBUS=1
+CONFIG_I2CTOOL_MAXBUS=3
+#CONFIG_I2CTOOL_MINADDR
+#CONFIG_I2CTOOL_MAXADDR
+#CONFIG_I2CTOOL_MAXREGADDR
+CONFIG_I2CTOOL_DEFFREQ=100000
+
+#
+# Settings for examples/usbserial
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/adc
+#
+
+#
+# Settings for examples/can
+#
+
+#
+# Settings for examples/nx
+#
+CONFIG_EXAMPLES_NX_BUILTIN=y
+CONFIG_EXAMPLES_NX_VPLANE=0
+CONFIG_EXAMPLES_NX_DEVNO=0
+CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
+CONFIG_EXAMPLES_NX_COLOR1=0xaedc
+CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
+CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
+CONFIG_EXAMPLES_NX_FONTID=0
+CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
+CONFIG_EXAMPLES_NX_BPP=16
+CONFIG_EXAMPLES_NX_RAWWINDOWS=n
+CONFIG_EXAMPLES_NX_STACKSIZE=2048
+CONFIG_EXAMPLES_NX_CLIENTPRIO=80
+CONFIG_EXAMPLES_NX_SERVERPRIO=120
+CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
+CONFIG_EXAMPLES_NX_EXTERNINIT=n
+
+#
+# Settings for examples/nxhello
+#
+CONFIG_EXAMPLES_NXHELLO_BUILTIN=y
+CONFIG_EXAMPLES_NXHELLO_VPLANE=0
+CONFIG_EXAMPLES_NXHELLO_DEVNO=0
+CONFIG_EXAMPLES_NXHELLO_BGCOLOR=0x0011
+CONFIG_EXAMPLES_NXHELLO_FONTID=6
+CONFIG_EXAMPLES_NXHELLO_FONTCOLOR=0xffdf
+CONFIG_EXAMPLES_NXHELLO_BPP=16
+CONFIG_EXAMPLES_NXHELLO_EXTERNINIT=n
+
+#
+# Settings for examples/nximage
+#
+CONFIG_EXAMPLES_NXIMAGE_BUILTIN=y
+CONFIG_EXAMPLES_NXIMAGE_VPLANE=0
+CONFIG_EXAMPLES_NXIMAGE_DEVNO=0
+CONFIG_EXAMPLES_NXIMAGE_BPP=16
+CONFIG_EXAMPLES_NXIMAGE_XSCALEp5=n
+CONFIG_EXAMPLES_NXIMAGE_XSCALE1p5=y
+CONFIG_EXAMPLES_NXIMAGE_XSCALE2p0=n
+CONFIG_EXAMPLES_NXIMAGE_YSCALEp5=n
+CONFIG_EXAMPLES_NXIMAGE_YSCALE1p5=y
+CONFIG_EXAMPLES_NXIMAGE_YSCALE2p0=n
+CONFIG_EXAMPLES_NXIMAGE_EXTERNINIT=n
+
+#
+# Settings for examples/nxlines
+#
+CONFIG_EXAMPLES_NXLINES_BUILTIN=n
+CONFIG_EXAMPLES_NXLINES_VPLANE=0
+CONFIG_EXAMPLES_NXLINES_DEVNO=0
+CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
+CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
+CONFIG_EXAMPLES_NXLINES_BPP=16
+CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n
+
+#
+# Settings for examples/touchscreen
+#
+CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=y
+CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
+CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
+CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=25
+
+#
+# Settings for examples/usbstorage
+#
+CONFIG_EXAMPLES_USBMSC_BUILTIN=y
+CONFIG_EXAMPLES_USBMSC_NLUNS=1
+CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0
+CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBMSC_DEBUGMM=n
+CONFIG_EXAMPLES_USBMSC_TRACEINIT=n
+CONFIG_EXAMPLES_USBMSC_TRACECLASS=n
+CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/watchdog
+#
+# This test depends on these specific Watchdog/NSH configurations settings (your
+# specific watchdog hardware settings might require additional settings).
+#
+
+#
+# Settings for examples/pwm
+#
+
+#
+# Settings for examples/ftpd
+#
+
+#
+# Stack and heap information
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+#CONFIG_STACK_POINTER
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/stm3240g-eval/webserver/setenv.sh b/nuttx/configs/stm3240g-eval/webserver/setenv.sh
new file mode 100644
index 0000000000..2347f39d84
--- /dev/null
+++ b/nuttx/configs/stm3240g-eval/webserver/setenv.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# configs/stm3240g-eval/webserver/setenv.sh
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"