Age | Commit message (Collapse) | Author | Files | Lines |
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@278132 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@277773 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@274783 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@273198 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@273197 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@180719 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r177096 | tilghman | 2009-02-18 12:30:38 -0600 (Wed, 18 Feb 2009) | 2 lines
Document the return value of the update method (as requested on -dev list)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@177098 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@176631 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@159818 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
and config_text_file_save to have an ast_ prefix
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@154260 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
leaks found with these changes.
(Closes issue #13505, closes issue #13543)
Reported by: mav3rick, triccyx
Patches:
20081001__bug13505.diff.txt uploaded by Corydon76 (license 14)
Tested by: mav3rick, triccyx
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@149199 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
'update2', which permits updates which match across multiple columns, instead
of requiring all tables to have a single unique identifier. All of the other
API calls with the exception of 'update' already had the ability to match on
multiple fields, so it was a missing and very desireable feature that an API
call implementing an update should have this, too.
This does not change any outward performance of Asterisk, but it should make
life easier for application developers who use the RealTime framework.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@148570 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@142992 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@135717 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@122766 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@121367 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
to realtime less painful in the future.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@120789 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115159 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
deprecated function)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@115157 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
to reload any file that references a given configuration file.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@111012 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
caching would not work properly for users.conf and any other file read from
more than one place. I needed to add the filename which requested the config
file to get it to work properly.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@107791 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Added ability to retrieve list of categories in a config file.
Added ability to retrieve the content of a particular category.
Added ability to empty a context.
Created new action to create a new file.
Updated delete action to allow deletion by line number with respect to category.
Added new action insert to add new variable to category at specified line.
Updated action newcat to allow new category to be inserted in file above another existing category.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@103331 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
field.
(from team/russell/chan_console)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@95410 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
see description in config.h .
They are a variant of the set of macros i used in chan_oss.c,
structured in a way to be more robust to the presence of
spurious ';' - basically, they define wrappers for 'do {'
and '} while (0)', plus some helper functions to deal with simple
cases such as ast_copy_string, ast_malloc, strtoul, ast_true ...
The prefix (CV_ as 'Config Variable') tries to be easy to remember
and has been chosen to not conflict with other existing macros in the tree.
For the time being, I have only updated the three source files in the
tree that used the old M_* macros. Hopefully, more files will be
converted.
NOTE:
I understand that inventing my own dialect of C is generally wrong;
however, the lack of adequate support in the language encourages
lazy programming practices (such as ignoring errors, bounds, etc.)
and this increases the chance of vulnerability in the code, especially
because we are parsing user input here.
Hopefully, these macros and the use of ast_parse_arg (in config.h)
should encourage the programmer to write more robust code.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@94191 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
types not supported (INT16 and UINT16)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@93925 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89333 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
once we have a pointer to the category.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89322 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89268 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@89202 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
defined in a file, and attaching any accumulated comments to that object (category header or variable declaration). The file_save routine also had to be upgraded to output these trailing comments. Config.h was modified to include the trailing comment list on categories and variables.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@81519 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
didn't add it to 1.4 yet, because it's not entirely clear to me if this is a bug fix or an enhancement. A lot of files were affected by small changes like ast_variable_new getting an added arg, for the file name the var was defined in; ast_category_new gets added args of filename and lineno; ast_category and ast_variable structures now record file and lineno for each entry; a list of all #include and #execs in a config file (or any of its inclusions are now kept in the ast_config struct; at save time, each entry is put back into its proper file of origin, in order. #include and #exec directives are folded in properly. Headers indicating that the file was generated, are generated also for each included file. Some changes to main/manager.c to take care of file renaming, via the UpdateConfig command. Multiple inclusions of the same file are handled by exploding these into multiple include files, uniquely named. There's probably more, but I can't remember it right now.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@81361 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@79747 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78103 | mmichelson | 2007-08-03 15:25:22 -0500 (Fri, 03 Aug 2007) | 7 lines
Changed the behavior of sip's realtime_peer function to match the corresponding way of matching for non-realtime peers.
Now matches are made on both the IP address and port number, or if the insecure setting is set to "port" then just match on the
IP address.
In order to accomplish this, I also added a new API call, ast_category_root, which returns the first variable of an ast_category struct
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@78186 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@75381 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
in a consistent way. This is meant to replace the custom code
which is repeated all over the place in the various files when
parsing config files, CLI entries and other string information.
Right now the code supports parsing int32, uint32 and sockaddr_in with
optional default values and bound checks. It contains minimal error
checking, but that can be easily extended as the need arises.
Being a new API i am introducing this only in trunk, though I believe
that once the interface has been ironed out it might become a
worthwhile addition to 1.4 as well - basically, the first time
we will need to fix a piece of argument parsing code, we might as
well bring in this change and use the new API instead.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@75379 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
use the \retval tag for documenting return values, fixing various warnings
when generating the documentation, and various other things.
(closes issue #10203, snuffy)
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@75164 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r61690 | russell | 2007-04-20 13:19:18 -0500 (Fri, 20 Apr 2007) | 4 lines
Fix the UpdateConfig manager action to properly treat "variables" and "objects"
differently (a=b versus a=>b).
(issue #9568, reported by pari, patch by me)
........
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@61691 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
store/destroy mechanisms needed these missing peices.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@61374 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
destroy_func, to make Realtime a complete database abstraction
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@59253 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@56665 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@54464 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
previously set are erroneously still set (Bug 6701). After discussion,
it was determined this should only be changed in trunk.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@49801 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@49727 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
(issue 7983).
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@43364 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@43052 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
no when appending.
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@38489 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@37936 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@12232 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@10989 f38db490-d61c-443f-a65b-d21fe96a405b
|
|
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@10988 f38db490-d61c-443f-a65b-d21fe96a405b
|