diff options
Diffstat (limited to 'configs')
-rw-r--r-- | configs/chan_dahdi.conf.sample | 7 | ||||
-rw-r--r-- | configs/chan_ooh323.conf.sample | 12 | ||||
-rw-r--r-- | configs/codecs.conf.sample | 19 | ||||
-rw-r--r-- | configs/confbridge.conf.sample | 23 | ||||
-rw-r--r-- | configs/features.conf.sample | 4 |
5 files changed, 62 insertions, 3 deletions
diff --git a/configs/chan_dahdi.conf.sample b/configs/chan_dahdi.conf.sample index 16269dc39..b7f59f795 100644 --- a/configs/chan_dahdi.conf.sample +++ b/configs/chan_dahdi.conf.sample @@ -664,6 +664,13 @@ transfer=yes ; ('canpark=no' is overridden by 'transfer=yes') ; canpark=yes + +; Sets the default parking lot for call parking. +; This is setable per channel. +; Parkinglots are configured in features.conf +; +;parkinglot=plaza + ; ; Support call forward variable ; diff --git a/configs/chan_ooh323.conf.sample b/configs/chan_ooh323.conf.sample index 8dbdafc73..20ccf73ec 100644 --- a/configs/chan_ooh323.conf.sample +++ b/configs/chan_ooh323.conf.sample @@ -122,6 +122,18 @@ dtmfmode=rfc2833 ; ;roundtrip=x,y +; +; FAX detection will cause the OOH323 channel to jump to the 'fax' extension (if it exists) +; based one or more events being detected. The events that can be detected are an incoming +; CNG tone or an incoming T.38 RequestMode packet +; +; yes - enable both detection (CNG & T.38) +; no - disable both +; cng - enable CNG detection (default) +; t38 - enable T.38 request detection +; +faxdetect = cng + ; User/peer/friend definitions: ; User config options Peer config options ; ------------------ ------------------- diff --git a/configs/codecs.conf.sample b/configs/codecs.conf.sample index 4404d4a0c..9b5738577 100644 --- a/configs/codecs.conf.sample +++ b/configs/codecs.conf.sample @@ -126,7 +126,6 @@ maxbitrate=20000 fec=true packetloss_percentage=10; - [silk24] type=silk samprate=24000 @@ -134,3 +133,21 @@ maxbitrate=30000 fec=true packetloss_percentage=10; + +; Default custom CELT codec definitions. Only one custom CELT definition is allowed +; per a sample rate. +;[celt44] +;type=celt +;samprate=44100 ; The samplerate in hz. This option is required. +;framesize=480 ; The framesize option represents the duration of each frame in samples. + ; This must be a factor of 2. This option is only advertised in an SDP + ; when it is set. Otherwise a default of framesize of 480 is assumed + ; internally + +;[celt48] +;type=celt +;samprate=48000 + +;[celt32] +;type=celt +;samprate=32000 diff --git a/configs/confbridge.conf.sample b/configs/confbridge.conf.sample index 408387012..e60ba73be 100644 --- a/configs/confbridge.conf.sample +++ b/configs/confbridge.conf.sample @@ -168,9 +168,13 @@ type=bridge ; larger amounts of delay into the bridge. Valid values here are 10, 20, 40, ; or 80. By default 20ms is used. -;video_mode = follow_talker ; Sets how confbridge handles video distribution to the conference participants. +;video_mode = follow_talker; Sets how confbridge handles video distribution to the conference participants. ; Note that participants wanting to view and be the source of a video feed - ; _MUST_ be sharing the same video codec. + ; _MUST_ be sharing the same video codec. Also, using video in conjunction with + ; with the jitterbuffer currently results in the audio being slightly out of sync + ; with the video. This is a result of the jitterbuffer only working on the audio + ; stream. It is recommended to disable the jitterbuffer when video is used. + ; ; --- MODES --- ; none: No video sources are set by default in the conference. It is still ; possible for a user to be set as a video source via AMI or DTMF action @@ -284,8 +288,23 @@ type=bridge ; admin_toggle_conference_lock ; This action allows an Admin to toggle locking and ; unlocking the conference. Non admins can not use ; this action even if it is in their menu. + ; set_as_single_video_src ; This action allows any user to set themselves as the ; single video source distributed to all participants. + ; This will make the video feed stick to them regardless + ; of what the video_mode is set to. + +; release_as_single_video_src ; This action allows a user to release themselves as + ; the video source. If video_mode is not set to "none" + ; this action will result in the conference returning to + ; whatever video mode the bridge profile is using. + ; + ; Note that this action will have no effect if the user + ; is not currently the video source. Also, the user is + ; not guaranteed by using this action that they will not + ; become the video source again. The bridge will return + ; to whatever operation the video_mode option is set to + ; upon release of the video src. [sample_user_menu] type=menu diff --git a/configs/features.conf.sample b/configs/features.conf.sample index f9d9dd45d..dfeec1757 100644 --- a/configs/features.conf.sample +++ b/configs/features.conf.sample @@ -73,6 +73,10 @@ context => parkedcalls ; Which context parked calls are in (default parking lot ; caller is connected, then by default, the system will try to call back the ; person that did the transfer. If this is set to "yes", the callback will ; not be attempted and the transfer will just fail. + ; For atxferdropcall=no to work properly, you also need to + ; define ATXFER_NULL_TECH in main/features.c. The reason the + ; code is not enabled by default is spelled out in the comment + ; block near the top of main/features.c describing ATXFER_NULL_TECH. ;atxferloopdelay = 10 ; Number of seconds to sleep between retries (if atxferdropcall = no) ;atxfercallbackretries = 2 ; Number of times to attempt to send the call back to the transferer. ; By default, this is 2. |