diff options
Diffstat (limited to 'configs/sla.conf.sample')
| -rw-r--r-- | configs/sla.conf.sample | 100 |
1 files changed, 50 insertions, 50 deletions
diff --git a/configs/sla.conf.sample b/configs/sla.conf.sample index fc8865424..9fdb3f336 100644 --- a/configs/sla.conf.sample +++ b/configs/sla.conf.sample @@ -8,10 +8,10 @@ [general] ;attemptcallerid=no ; Attempt CallerID handling. The default value for this - ; is "no" because CallerID handling with an SLA setup is - ; known to not work properly in some situations. However, - ; feel free to enable it if you would like. If you do, and - ; you find problems, please do not report them. +; is "no" because CallerID handling with an SLA setup is +; known to not work properly in some situations. However, +; feel free to enable it if you would like. If you do, and +; you find problems, please do not report them. ; ------------------------------------- @@ -22,30 +22,30 @@ ;type=trunk ; This line is what marks this entry as a trunk. ;device=DAHDI/3 ; Map this trunk declaration to a specific device. - ; NOTE: You can not just put any type of channel here. - ; DAHDI channels can be directly used. IP trunks - ; require some indirect configuration which is - ; described in doc/asterisk.pdf. +; NOTE: You can not just put any type of channel here. +; DAHDI channels can be directly used. IP trunks +; require some indirect configuration which is +; described in doc/asterisk.pdf. ;autocontext=line1 ; This supports automatic generation of the dialplan entries - ; if the autocontext option is used. Each trunk should have - ; a unique context name. Then, in chan_dahdi.conf, this device - ; should be configured to have incoming calls go to this context. +; if the autocontext option is used. Each trunk should have +; a unique context name. Then, in chan_dahdi.conf, this device +; should be configured to have incoming calls go to this context. ;ringtimeout=30 ; Set how long to allow this trunk to ring on an inbound call before hanging - ; it up as an unanswered call. The value is in seconds. +; it up as an unanswered call. The value is in seconds. ;barge=no ; If this option is set to "no", then no station will be - ; allowed to join a call that is in progress. The default - ; value is "yes". +; allowed to join a call that is in progress. The default +; value is "yes". ;hold=private ; This option configure hold permissions for this trunk. - ; "open" - This means that any station can put this trunk - ; on hold, and any station can retrieve it from - ; hold. This is the default. - ; "private" - This means that once a station puts the - ; trunk on hold, no other station will be - ; allowed to retrieve the call from hold. +; "open" - This means that any station can put this trunk +; on hold, and any station can retrieve it from +; hold. This is the default. +; "private" - This means that once a station puts the +; trunk on hold, no other station will be +; allowed to retrieve the call from hold. ;[line2] ;type=trunk @@ -60,9 +60,9 @@ ;[line4] ;type=trunk ;device=Local/disa@line4_outbound ; A Local channel in combination with the Disa - ; application can be used to support IP trunks. - ; See doc/asterisk.pdf on more information on how - ; IP trunks work. +; application can be used to support IP trunks. +; See doc/asterisk.pdf on more information on how +; IP trunks work. ;autocontext=line4 ; -------------------------------------- @@ -76,48 +76,48 @@ ;device=SIP/station1 ; Each station must be mapped to a device. ;autocontext=sla_stations ; This supports automatic generation of the dialplan entries if - ; the autocontext option is used. All stations can use the same - ; context without conflict. The device for this station should - ; have its context configured to the same one listed here. +; the autocontext option is used. All stations can use the same +; context without conflict. The device for this station should +; have its context configured to the same one listed here. ;ringtimeout=10 ; Set a timeout for how long to allow the station to ring for an - ; incoming call, in seconds. +; incoming call, in seconds. ;ringdelay=10 ; Set a time for how long to wait before beginning to ring this station - ; once there is an incoming call, in seconds. +; once there is an incoming call, in seconds. ;hold=private ; This option configure hold permissions for this station. Note - ; that if private hold is set in the trunk entry, that will override - ; anything here. However, if a trunk has open hold access, but this - ; station is set to private hold, then the private hold will be in - ; effect. - ; "open" - This means that once this station puts a call - ; on hold, any other station is allowed to retrieve - ; it. This is the default. - ; "private" - This means that once this station puts a - ; call on hold, no other station will be - ; allowed to retrieve the call from hold. - +; that if private hold is set in the trunk entry, that will override +; anything here. However, if a trunk has open hold access, but this +; station is set to private hold, then the private hold will be in +; effect. +; "open" - This means that once this station puts a call +; on hold, any other station is allowed to retrieve +; it. This is the default. +; "private" - This means that once this station puts a +; call on hold, no other station will be +; allowed to retrieve the call from hold. + ;trunk=line1 ; Individually list all of the trunks that will appear on this station. This - ; order is significant. It should be the same order as they appear on the - ; phone. The order here defines the order of preference that the trunks will - ; be used. +; order is significant. It should be the same order as they appear on the +; phone. The order here defines the order of preference that the trunks will +; be used. ;trunk=line2 ;trunk=line3,ringdelay=5 ; A ring delay for the station can also be specified for a specific trunk. - ; If a ring delay is specified both for the whole station and for a specific - ; trunk on a station, the setting for the specific trunk will take priority. - ; This value is in seconds. +; If a ring delay is specified both for the whole station and for a specific +; trunk on a station, the setting for the specific trunk will take priority. +; This value is in seconds. ;trunk=line4,ringtimeout=5 ; A ring timeout for the station can also be specified for a specific trunk. - ; If a ring timeout is specified both for the whole station and for a specific - ; trunk on a station, the setting for the specific trunk will take priority. - ; This value is in seconds. +; If a ring timeout is specified both for the whole station and for a specific +; trunk on a station, the setting for the specific trunk will take priority. +; This value is in seconds. ;[station](!) ; When there are a lot of stations that are configured the same way, - ; it is convenient to use a configuration template like this so that - ; the common settings stay in one place. +; it is convenient to use a configuration template like this so that +; the common settings stay in one place. ;type=station ;autocontext=sla_stations ;trunk=line1 |