diff options
| author | seanbright <seanbright@f38db490-d61c-443f-a65b-d21fe96a405b> | 2009-07-02 17:46:14 +0000 |
|---|---|---|
| committer | seanbright <seanbright@f38db490-d61c-443f-a65b-d21fe96a405b> | 2009-07-02 17:46:14 +0000 |
| commit | 0071975778c7b36b5c63d55df350397e63c45b3b (patch) | |
| tree | 217bddbe9752bc9d7d91a1aaac0610745b5be3f3 /configs/chan_dahdi.conf.sample | |
| parent | 63c792a4133b03e697f53e9f6aecf98776f1fae9 (diff) | |
Support setting and receiving Reverse Charging Indication over ISDN PRI.
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: http://svn.digium.com/svn/asterisk/trunk@204749 f38db490-d61c-443f-a65b-d21fe96a405b
Diffstat (limited to 'configs/chan_dahdi.conf.sample')
| -rw-r--r-- | configs/chan_dahdi.conf.sample | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/configs/chan_dahdi.conf.sample b/configs/chan_dahdi.conf.sample index 742de81bd..676c83ec9 100644 --- a/configs/chan_dahdi.conf.sample +++ b/configs/chan_dahdi.conf.sample @@ -77,6 +77,11 @@ ;service_message_support=yes ; Enable service message support for channel. Must be set after switchtype. ; +; PRI Reverse Charging Indication: Indicate to the called party that the +; call will be reverse charged. To enable, prefix the dialed number with one +; of the following letters: +; C - Reverse Charge Indication Requested +; ; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for ; the dialed number. For most installations, leaving this as 'unknown' (the ; default) works in the most cases. In some very unusual circumstances, you |