aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authortilghman <tilghman@f38db490-d61c-443f-a65b-d21fe96a405b>2008-08-15 20:35:24 +0000
committertilghman <tilghman@f38db490-d61c-443f-a65b-d21fe96a405b>2008-08-15 20:35:24 +0000
commit5a9b0a4deab9f3260a2d3880f7b4975736cf3a21 (patch)
treee2d07b0eddaa954c2742ea9d1f810c3a3ef196fe
parente39711a3c24a8e7f9efaee3d9eff3e466cb19fc0 (diff)
Remove deprecated syntax from sample config file
(closes issue #13314) Reported by: kue git-svn-id: http://svn.digium.com/svn/asterisk/trunk@138206 f38db490-d61c-443f-a65b-d21fe96a405b
-rw-r--r--configs/extensions.conf.sample21
-rw-r--r--main/pbx.c2
2 files changed, 11 insertions, 12 deletions
diff --git a/configs/extensions.conf.sample b/configs/extensions.conf.sample
index 2fe4db3f3..4f54c3c0f 100644
--- a/configs/extensions.conf.sample
+++ b/configs/extensions.conf.sample
@@ -180,18 +180,17 @@ TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
;
;[context]
;exten => someexten,{priority|label{+|-}offset}[(alias)],application(arg1,arg2,...)
-;exten => someexten,{priority|label{+|-}offset}[(alias)],application,arg1|arg2...
;
; Timing list for includes is
;
-; <time range>|<days of week>|<days of month>|<months>
+; <time range>,<days of week>,<days of month>,<months>
;
; Note that ranges may be specified to wrap around the ends. Also, minutes are
; fine-grained only down to the closest even minute.
;
-;include => daytime|9:00-17:00|mon-fri|*|*
-;include => weekend|*|sat-sun|*|*
-;include => weeknights|17:02-8:58|mon-fri|*|*
+;include => daytime,9:00-17:00,mon-fri,*,*
+;include => weekend,*,sat-sun,*,*
+;include => weeknights,17:02-8:58,mon-fri,*,*
;
; ignorepat can be used to instruct drivers to not cancel dialtone upon
; receipt of a particular pattern. The most commonly used example is
@@ -437,7 +436,7 @@ exten => s,n,Set(LOCAL(tortcntx)=${ARG4})
exten => s,n,Set(LOCAL(cntx)=${ARG5})
exten => s,n,Set(LOCAL(mbx)="${ext}"$["${cntx}" ? "@${cntx}" :: ""])
-exten => s,n,Dial(${dev},20|p) ; Ring the interface, 20 seconds maximum, call screening
+exten => s,n,Dial(${dev},20,p) ; Ring the interface, 20 seconds maximum, call screening
; option (or use P for databased call screening)
exten => s,n,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
@@ -466,12 +465,12 @@ exten => a,1,VoicemailMain(${mbx}) ; If they press *, send the user into Voicem
;
; ${ARG1} - Device to page
-exten => s,1,ChanIsAvail(${ARG1}|js) ; j is for Jump and s is for ANY call
+exten => s,1,ChanIsAvail(${ARG1},js) ; j is for Jump and s is for ANY call
exten => s,n,GoToIf([${AVAILSTATUS} = "1"]?autoanswer:fail)
exten => s,n(autoanswer),Set(_ALERT_INFO="RA") ; This is for the PolyComs
exten => s,n,SIPAddHeader(Call-Info: Answer-After=0) ; This is for the Grandstream, Snoms, and Others
exten => s,n,NoOp() ; Add others here and Post on the Wiki!!!!
-exten => s,n,Dial(${ARG1}||)
+exten => s,n,Dial(${ARG1})
exten => s,n(fail),Hangup
@@ -547,7 +546,7 @@ exten => _7XXX,1,Macro(page,SIP/${EXTEN})
; System Wide Page at extension 7999
;
exten => 7999,1,Set(TIMEOUT(absolute)=60)
-exten => 7999,2,Page(Local/Grandstream1@page&Local/Xlite1@page&Local/1234@page/n|d)
+exten => 7999,2,Page(Local/Grandstream1@page&Local/Xlite1@page&Local/1234@page/n,d)
; Give voicemail at extension 8500
;
@@ -620,11 +619,11 @@ include => demo
;exten => 6275,1,Gosub(stdexten,s,1(6275,${MARK}))
; assuming ${MARK} is something like DAHDI/2
;exten => 6275,n,Goto(default,s,1) ; exited Voicemail
-;exten => mark,1,Goto(6275|1) ; alias mark to 6275
+;exten => mark,1,Goto(6275,1) ; alias mark to 6275
;exten => 6536,1,Gosub(stdexten,s,1(6236,${WIL}))
; Ditto for wil
;exten => 6536,n,Goto(default,s,1) ; exited Voicemail
-;exten => wil,1,Goto(6236|1)
+;exten => wil,1,Goto(6236,1)
;If you want to subscribe to the status of a parking space, this is
;how you do it. Subscribe to extension 6600 in sip, and you will see
diff --git a/main/pbx.c b/main/pbx.c
index cb9a5bf5f..3bf360ad7 100644
--- a/main/pbx.c
+++ b/main/pbx.c
@@ -6272,7 +6272,7 @@ int ast_context_add_include2(struct ast_context *con, const char *value,
/* Strip off timing info, and process if it is there */
if ( (c = strchr(p, ',')) ) {
*c++ = '\0';
- new_include->hastime = ast_build_timing(&(new_include->timing), c);
+ new_include->hastime = ast_build_timing(&(new_include->timing), c);
}
new_include->next = NULL;
new_include->registrar = registrar;