diff options
Diffstat (limited to 'common2/services/delay/example/samd20_xplained_pro/iar')
4 files changed, 4921 insertions, 0 deletions
diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/asf.h b/common2/services/delay/example/samd20_xplained_pro/iar/asf.h new file mode 100644 index 00000000..2a8de59e --- /dev/null +++ b/common2/services/delay/example/samd20_xplained_pro/iar/asf.h @@ -0,0 +1,93 @@ +/** + * \file + * + * \brief Autogenerated API include file for the Atmel Software Framework (ASF) + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef ASF_H +#define ASF_H + +/* + * This file includes all API header files for the selected drivers from ASF. + * Note: There might be duplicate includes required by more than one driver. + * + * The file is automatically generated and will be re-written when + * running the ASF driver selector tool. Any changes will be discarded. + */ +
+// From module: Common SAM0 compiler driver
+#include <compiler.h>
+#include <status_codes.h>
+
+// From module: Delay routines
+#include <delay.h>
+
+// From module: Generic board support
+#include <board.h>
+
+// From module: Interrupt management - SAM implementation
+#include <interrupt.h>
+
+// From module: PORT - GPIO Pin Control
+#include <port.h>
+
+// From module: Part identification macros
+#include <parts.h>
+
+// From module: SYSTEM - Clock Management for SAMD20
+#include <clock.h>
+#include <gclk.h>
+
+// From module: SYSTEM - Core System Driver
+#include <system.h>
+
+// From module: SYSTEM - I/O Pin Multiplexer
+#include <pinmux.h>
+
+// From module: SYSTEM - Interrupt Driver
+#include <system_interrupt.h>
+
+// From module: SYSTEM - Power Management for SAM D20/D21/R21/D09/D10/D11/DA/HA
+#include <power.h>
+
+// From module: SYSTEM - Reset Management for SAM D20/D21/R21/D09/D10/D11/DA/HA
+#include <reset.h>
+ +#endif // ASF_H diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww new file mode 100644 index 00000000..2de78514 --- /dev/null +++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example.eww @@ -0,0 +1,6 @@ +<workspace> + <batchBuild></batchBuild> + <project> + <path>$WS_DIR$\delay_example_flash.ewp</path> + </project> +</workspace> diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd new file mode 100644 index 00000000..720c5d74 --- /dev/null +++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewd @@ -0,0 +1,2339 @@ +<project> + <fileVersion>2</fileVersion> + <configuration> + <name>Debug</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>23</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state></state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>1</state> + </option> + <option> + <name>OCProductVersion</name> + <state>6.40.4.54214</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>CMSISDAP_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>6.40.1.53794</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\Atmel\SAMD20\samD20-flash.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeConfigFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>0</version> + <state>33</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>0</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>0</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>14</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>JLinkSpeed</name> + <state>200</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>200</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>1</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>200</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>RDIJTAGJET_ID</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JTAGjetConfigure</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>23</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state>$PROJ_DIR$\../../../../../../sam0/boards/samd20_xplained_pro/debug_scripts/iar/samd20_xplained_pro_flash.mac</state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state></state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>1</state> + </option> + <option> + <name>OCProductVersion</name> + <state>6.40.4.54214</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>CMSISDAP_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state></state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeConfigFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>0</version> + <state>33</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>0</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>0</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>14</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>32</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>32</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>5</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>RDIJTAGJET_ID</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JTAGjetConfigure</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> +</project> diff --git a/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp new file mode 100644 index 00000000..d8154b9f --- /dev/null +++ b/common2/services/delay/example/samd20_xplained_pro/iar/delay_example_flash.ewp @@ -0,0 +1,2483 @@ +<project> + <fileVersion>2</fileVersion> + <configuration> + <name>Debug</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>21</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>ExePath</name> + <state>Debug\Exe</state> + </option> + <option> + <name>ObjPath</name> + <state>Debug\Obj</state> + </option> + <option> + <name>ListPath</name> + <state>Debug\List</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>35</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>5.10.0.159</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>6.40.1.53794</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>ATSAMD20J18 Atmel ATSAMD20J18</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>1</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>35</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>35</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>1</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>SYSTICK_MODE</state> + <state>__SAMD20J18__</state> + <state>BOARD=SAMD20_XPLAINED_PRO</state> + <state>ARM_MATH_CM0PLUS=true</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>0</version> + <state>1111111</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>0</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state> + <state>$PROJ_DIR$/../../..</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state> + <state>$PROJ_DIR$/../../../sam0</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state>1</state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>SYSTICK_MODE</state> + <state>__SAMD20J18__</state> + <state>BOARD=SAMD20_XPLAINED_PRO</state> + <state>ARM_MATH_CM0PLUS=true</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state> + <state>$PROJ_DIR$/../../..</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state> + <state>$PROJ_DIR$/../../../sam0</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>2</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>0</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>delay_example_flash.bin</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>IlinkOutputFile</name> + <state>delay_example_flash.out</state> + </option> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>0</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>1</state> + </option> + <option> + <name>IlinkExtraOptions</name> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>0</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>21</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>Release\Exe</state> + </option> + <option> + <name>ObjPath</name> + <state>Release\Obj</state> + </option> + <option> + <name>ListPath</name> + <state>Release\List</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>0</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>5.10.0.159</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>6.30.1.53141</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>ATSAMD20J18 Atmel ATSAMD20J18</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>0</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>0</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>0</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>1</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>SYSTICK_MODE</state> + <state>__SAMD20J18__</state> + <state>BOARD=SAMD20_XPLAINED_PRO</state> + <state>ARM_MATH_CM0PLUS=true</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>0</version> + <state>1111111</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>0</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state> + <state>$PROJ_DIR$/../../..</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state> + <state>$PROJ_DIR$/../../../sam0</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>1</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state>0</state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>SYSTICK_MODE</state> + <state>__SAMD20J18__</state> + <state>BOARD=SAMD20_XPLAINED_PRO</state> + <state>ARM_MATH_CM0PLUS=true</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/port</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source</state> + <state>$PROJ_DIR$/../../..</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power</state> + <state>$PROJ_DIR$/../../../../../../sam0/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt</state> + <state>$PROJ_DIR$/../../../sam0</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system</state> + <state>$PROJ_DIR$/../../../../../../sam0/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>0</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>delay_example_flash.bin</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkOutputFile</name> + <state>delay_example_flash.out</state> + </option> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$/../../../../../../sam0/utils/linker_scripts/samd20/iar/samd20j18_flash.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>0</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>1</state> + </option> + <option> + <name>IlinkExtraOptions</name> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state></state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + </configuration> + <group> + <name>common</name> + <group> + <name>utils</name> + <group> + <name>interrupt</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name> + </file> + </group> + <group> + <name>boards</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/boards/board.h</name> + </file> + </group> + </group> + <group> + <name>sam0</name> + <group> + <name>utils</name> + <group> + <name>cmsis</name> + <group> + <name>samd20</name> + <group> + <name>source</name> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/iar/startup_samd20.c</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/source/system_samd20.h</name> + </file> + </group> + <group> + <name>include</name> + <group> + <name>pio</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j18.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e18.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g16.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18u.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g17u.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20j16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g18.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20g15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/pio/samd20e16.h</name> + </file> + </group> + <group> + <name>instance</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/wdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac2.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sysctrl.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/gclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/ac.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dac.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/adc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/dsu.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/rtc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/port.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc6.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom2.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom4.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc5.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/nvmctrl.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc3.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc7.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom3.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc4.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom5.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/evsys.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/tc2.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/sercom1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/eic.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/instance/pac1.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16.h</name> + </file> + <group> + <name>component</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/wdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sysctrl.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/evsys.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/rtc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/sercom.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dac.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/tc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/gclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/dsu.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/port.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/eic.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/adc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/ac.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/pac.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/component/nvmctrl.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j18.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e14.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g15b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e18.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e17.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20j14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g14b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e16b.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20e15.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g17u.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18u.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/cmsis/samd20/include/samd20g18.h</name> + </file> + </group> + </group> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/status_codes.h</name> + </file> + <group> + <name>preprocessor</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/stringz.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/tpaste.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/preprocessor.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrecursion.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/preprocessor/mrepeat.h</name> + </file> + </group> + <group> + <name>header_files</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/header_files/io.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/utils/compiler.h</name> + </file> + </group> + <group> + <name>drivers</name> + <group> + <name>system</name> + <group> + <name>interrupt</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt.h</name> + </file> + <group> + <name>system_interrupt_samd20</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/interrupt/system_interrupt_samd20/system_interrupt_features.h</name> + </file> + </group> + </group> + <group> + <name>clock</name> + <group> + <name>clock_samd20</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/gclk.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_config_check.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock_samd20/clock_feature.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/gclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/clock/clock.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.c</name> + </file> + <group> + <name>pinmux</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.c</name> + </file> + <group> + <name>quick_start</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/quick_start/qs_pinmux_basic.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/pinmux/pinmux.h</name> + </file> + </group> + <group> + <name>reset</name> + <group> + <name>reset_sam_d_r_h</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/reset/reset_sam_d_r_h/reset.h</name> + </file> + </group> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/system.h</name> + </file> + <group> + <name>power</name> + <group> + <name>power_sam_d_r_h</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/system/power/power_sam_d_r_h/power.h</name> + </file> + </group> + </group> + </group> + <group> + <name>port</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/port/port.h</name> + </file> + <group> + <name>quick_start</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/drivers/port/quick_start/qs_port_basic.h</name> + </file> + </group> + </group> + </group> + <group> + <name>boards</name> + <group> + <name>samd20_xplained_pro</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/board_init.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam0/boards/samd20_xplained_pro/samd20_xplained_pro.h</name> + </file> + </group> + </group> + </group> + <group> + <name>common2</name> + <group> + <name>services</name> + <group> + <name>delay</name> + <group> + <name>example</name> + <file> + <name>$PROJ_DIR$/../../delay_example.c</name> + </file> + <group> + <name>samd20_xplained_pro</name> + <file> + <name>$PROJ_DIR$/../conf_board.h</name> + </file> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/asf.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../conf_clocks.h</name> + </file> + </group> + </group> + <group> + <name>sam0</name> + <file> + <name>$PROJ_DIR$/../../../sam0/systick_counter.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../sam0/systick_counter.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../delay.h</name> + </file> + </group> + </group> + </group> +</project> |