diff options
author | Harald Welte <laforge@gnumonks.org> | 2018-05-07 19:59:35 +0200 |
---|---|---|
committer | Harald Welte <laforge@gnumonks.org> | 2018-05-07 19:59:35 +0200 |
commit | 3634cc8e5d3124e3cf6cf46c0f1d5385ff511426 (patch) | |
tree | 1af66e339e767fc62d588766fd8d3b26edd29e3b /thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db |
initial check-in of ASF 3.39.0
Diffstat (limited to 'thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db')
20 files changed, 7763 insertions, 0 deletions
diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/FreeRTOSConfig.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/FreeRTOSConfig.h new file mode 100644 index 00000000..8b3144da --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/FreeRTOSConfig.h @@ -0,0 +1,154 @@ +/** + * + * \file + * + * \brief Generic FreeRTOS peripheral control functions + * + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +#if defined (__GNUC__) || defined (__ICCARM__) +#include <stdint.h> +#endif + +//#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#define configUSE_TICKLESS_IDLE 0 +#define configUSE_PREEMPTION 0 +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configCPU_CLOCK_HZ ( sysclk_get_cpu_hz() ) +#define configTICK_RATE_HZ ( ( portTickType ) 1000 ) +#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 ) +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 130 ) +#define configTOTAL_HEAP_SIZE ( ( size_t ) 12000 ) +#define configMAX_TASK_NAME_LEN ( 16 ) +#define configUSE_TRACE_FACILITY 0 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 12 +#define configCHECK_FOR_STACK_OVERFLOW 0 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Software timer definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_QUEUE_LENGTH 5 +#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 3 ) + +/* Set the following definitions to 1 to include the API function, or zero +to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 1 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_eTaskStateGet 1 + +#define INCLUDE_uxTaskGetStackHighWaterMark 1 + +/* FreeRTOS+CLI definitions. */ + +/* Dimensions a buffer into which command outputs can be written. The buffer +can be declared in the CLI code itself, to allow multiple command consoles to +share the same buffer. For example, an application may allow access to the +command interpreter by UART and by Ethernet. Sharing a buffer is done purely +to save RAM. Note, however, that the command console itself is not re-entrant, +so only one command interpreter interface can be used at any one time. For +that reason, no attempt at providing mutual exclusion to the buffer is +attempted. */ +#define configCOMMAND_INT_MAX_OUTPUT_SIZE 400 + + +/* Cortex-M specific definitions. */ + +#ifdef __NVIC_PRIO_BITS + /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */ + #define configPRIO_BITS __NVIC_PRIO_BITS +#else + #define configPRIO_BITS 4 /* 15 priority levels */ +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" +function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0x0f + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 10 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* Normal assert() semantics without relying on the provision of an assert.h +header file. */ +#define configASSERT( x ) //if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ) __asm volatile( "NOP" ); } +#define INCLUDE_MODULE_TEST 0 + +//#include "trcHooks.h" + +#endif /* FREERTOS_CONFIG_H */ + diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_board.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_board.h new file mode 100644 index 00000000..6fe10dad --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_board.h @@ -0,0 +1,69 @@ +/** + * \file + * + * \brief SAM4CMS-DB board configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_BOARD_H_INCLUDED +#define CONF_BOARD_H_INCLUDED + +/* Keep watchdog at board initialization (not disable it) */ +//#define CONF_BOARD_KEEP_WATCHDOG_AT_INIT + +/* Configure UART0 pins */ +#define CONF_BOARD_UART_CONSOLE +#define CONF_BOARD_UART0 + +/* Configure SPI pins */ +#define CONF_BOARD_SPI0 + +/* Configure SPI0 NPCS1 */ +//#define CONF_BOARD_SPI0_NPCS1 + +/* Configure SPI0 NPCS3 */ +#define CONF_BOARD_SPI0_NPCS3 + +/* Configure TWI pins*/ +//#define CONF_BOARD_TWI0 + +/* Configure AT30TSE pins */ +//#define CONF_BOARD_AT30TSE + +#endif /* CONF_BOARD_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_buart_if.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_buart_if.h new file mode 100644 index 00000000..bf217c31 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_buart_if.h @@ -0,0 +1,64 @@ +/** + * \file + * + * \brief PLC UART Buffered configuration file. + * + * This file contains basic functions for the SAM BUFFERED UART, with support + *for all + * modes, settings and clock speeds. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_BUART_IF_H_INCLUDED +#define CONF_BUART_IF_H_INCLUDED + +/** Timers Configuration */ +#define ID_TC_UART ID_TC5 +#define TC_UART TC1 +#define TC_UART_CHN 2 +#define TC_UART_Handler TC5_Handler + +/** Configuration Size Buffers */ +#define RX_UART_BUF0_SIZE 1024 +#define TX_UART_BUF0_SIZE 1024 + +#define RX_UART_BUF1_SIZE 1024 +#define TX_UART_BUF1_SIZE 1024 + +#endif /* CONF_BUART_IF_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_busart_if.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_busart_if.h new file mode 100644 index 00000000..0ab9f974 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_busart_if.h @@ -0,0 +1,64 @@ +/** + * \file + * + * \brief PLC USART Buffered configuration file. + * + * This file contains basic functions for the SAM BUFFERED USART, with support + *for all + * modes, settings and clock speeds. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_BUSART_IF_H_INCLUDED +#define CONF_BUSART_IF_H_INCLUDED + +/** Timers Configuration */ +#define ID_TC_USART ID_TC4 +#define TC_USART TC1 +#define TC_USART_CHN 1 +#define TC_USART_Handler TC4_Handler + +/** Configuration Size Buffers */ +#define RX_USART_BUF0_SIZE 1024 +#define TX_USART_BUF0_SIZE 1024 + +#define RX_USART_BUF1_SIZE 1024 +#define TX_USART_BUF1_SIZE 1024 + +#endif /* CONF_BUSART_IF_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_clock.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_clock.h new file mode 100644 index 00000000..d2011fa1 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_clock.h @@ -0,0 +1,108 @@ +/** + * \file + * + * \brief SAM4CM clock configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_CLOCK_H_INCLUDED +#define CONF_CLOCK_H_INCLUDED + +// ===== System Clock (MCK) Source Options +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_RC +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_XTAL +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_BYPASS +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_8M_RC +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_12M_RC +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_XTAL +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_BYPASS +//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK +#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLBCK + +// ===== System Clock (MCK) Prescaler Options (Fmck = Fsys / (SYSCLK_PRES)) +#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_2 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_4 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_8 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_16 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_32 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_64 +//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_3 + +// ===== PLL0 (A) Options (8.192M = (32.768K * 250) / 1) +//#define CONFIG_PLL0_SOURCE PLLA_SRC_SLCK_32K_XTAL + +// ===== PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div) +// Use mul and div effective values here. +#define CONFIG_PLL1_SOURCE PLLB_SRC_MAINCK_XTAL +#define CONFIG_PLL1_MUL (240000000UL / BOARD_FREQ_MAINCK_XTAL) +#define CONFIG_PLL1_DIV 2 + +// ===== Coprocessor System Clock (CPMCK) Options +// Fcpmck = Fcpclk_source / CPCLK_PRES + +// Note: +// CONFIG_CPCLK_ENABLE MUST be defined if using peripherals on bus matrix 1. +#define CONFIG_CPCLK_ENABLE + +// Coprocessor System Clock Source Options +//#define CONFIG_CPCLK_SOURCE CPCLK_SRC_SLCK +//#define CONFIG_CPCLK_SOURCE CPCLK_SRC_MAINCK +//#define CONFIG_CPCLK_SOURCE CPCLK_SRC_PLLACK +//#define CONFIG_CPCLK_SOURCE CPCLK_SRC_PLLBCK +#define CONFIG_CPCLK_SOURCE CPCLK_SRC_MCK + +// Coprocessor System Clock Prescaler Options (CPCLK_PRES may be 1 to 16). +#define CONFIG_CPCLK_PRES 1 + +// ===== Main processor frequency (MCK) +// - XTAL frequency: 8MHz +// - System clock source: PLLB +// - System clock prescaler: 1 (divided by 1) +// - PLLB source: XTAL +// - PLLB output: XTAL * 30 / 2 +// - System clock: 8 * 30 / 2 / 1 = 120MHz +// +// ===== Coprocessor frequency (CPMCK) +// - Coprocessor system clock source: MCK +// - Coprocessor system clock prescaler: 1 (divided by 1) +// - Coprocessor system clock: 120MHz / 1 = 120MHz + +#endif /* CONF_CLOCK_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_example.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_example.h new file mode 100644 index 00000000..c6bbf381 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_example.h @@ -0,0 +1,51 @@ +/** + * \file + * + * \brief Example configuration. + * + * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_EXAMPLE_H +#define CONF_EXAMPLE_H + +/* Task Monitor parameters */ +#define MONITOR_TIMER_RATE (500 / portTICK_RATE_MS) +#define MONITOR_BLOCK_TIME (1000 / portTICK_RATE_MS) + +#endif /* CONF_EXAMPLE_H */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_oss.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_oss.h new file mode 100644 index 00000000..ddb3f508 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_oss.h @@ -0,0 +1,53 @@ +/** + * \file + * + * \brief OSS Layer Configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_OSS_H_INCLUDE +#define CONF_OSS_H_INCLUDE + +/* Disable PRM capability */ +#define OSS_PRIME_DISABLE_PRM + +/* Enable embedded sniffer serialization */ +/* #define OSS_PRIME_ENABLE_EMB_SNIFFER */ + +#endif /* CONF_OSS_H_INCLUDE */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_phy.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_phy.h new file mode 100644 index 00000000..7a292363 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_phy.h @@ -0,0 +1,50 @@ +/** + * \file + * + * \brief PHY Layer Configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_PHY_H_INCLUDE +#define CONF_PHY_H_INCLUDE + +/* Select Coupling Board Configuration (see values in atpl230.h) */ +#define BOARD_COUPLING ATPLCOUP000_v2 + +#endif /* CONF_PHY_H_INCLUDE */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_pplc_if.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_pplc_if.h new file mode 100644 index 00000000..f9d57b21 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_pplc_if.h @@ -0,0 +1,69 @@ +/** + * \file + * + * \brief PPLC interface Configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_PPLC_IF_H_INCLUDE +#define CONF_PPLC_IF_H_INCLUDE + +#include "board.h" + +/* Select the SPI module that PPLC is connected to */ +#define PPLC_SPI_MODULE SPI0 + +/* Chip select used by PPLC internal peripheral */ +#define PPLC_CS 3 + +/* Interruption pin used by PPLC internal peripheral */ +#define PPLC_INT_GPIO (PIO_PB13_IDX) +#define PPLC_INT_FLAGS (IOPORT_MODE_DEBOUNCE) +#define PPLC_INT_SENSE (IOPORT_SENSE_FALLING) + +#define PPLC_INT {PIO_PB13, PIOB, ID_PIOB, PIO_INPUT, \ + PIO_DEBOUNCE | PIO_IT_FALL_EDGE} +#define PPLC_INT_MASK PIO_PB13 +#define PPLC_INT_PIO PIOB +#define PPLC_INT_ID ID_PIOB +#define PPLC_INT_TYPE PIO_INPUT +#define PPLC_INT_ATTR (PIO_DEBOUNCE | PIO_IT_FALL_EDGE) +#define PPLC_INT_IRQn PIOB_IRQn + +#endif /* CONF_PPLC_IF_H_INCLUDE */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_prime.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_prime.h new file mode 100644 index 00000000..23b55a69 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_prime.h @@ -0,0 +1,100 @@ +/** + * \file + * + * \brief PRIME configuration file. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_PRIME_H_INCLUDED +#define CONF_PRIME_H_INCLUDED + +#include "compiler.h" +#include "conf_usi.h" + +/* PRIME MODE */ +#define PRIME_BASE + +/* Firmware Information */ +#define PRIME_FW_VENDOR "ATMEL" +#define PRIME_FW_MODEL "SAM4CMSDB/000" +#define PRIME_FW_VERSION "01.03.08.01" + +/* Prime PIB firmware information */ +#define PRIME_PIB_VENDOR 0x0000 +#define PRIME_PIB_MODEL 0x3430 +#define PRIME_PIB_VERSION_LEN 8 +#define PRIME_PIB_VERSION "01030801" + +/* Not Minimum SNR value */ +/* #define NOT_USE_MINIMUM_SNR_VALID */ + +/* MAC Capabilities */ +/* #define NODE_CAPABLE_CFP */ +#define NODE_CAPABLE_PRM +#define NODE_CAPABLE_ARQ +#define NODE_CAPABLE_DIR_SW + +/* Firmware Upgrade Protocol */ +#define CFG_BASEMNG BASEMNG_DISABLE + +#ifdef USE_MNGP_PRIME_PORT + #define MNGLAYER_USE_SERIAL_PROFILE +#endif + +#ifdef USE_PROTOCOL_MAC_PRIME_PORT + #define MAC_USI_SERIALIZATION +#endif + +#ifdef USE_PROTOCOL_MLME_PRIME_PORT + #define MLME_USI_SERIALIZATION +#endif + +#ifdef USE_PROTOCOL_PLME_PRIME_PORT + #define PLME_USI_SERIALIZATION +#endif + +#ifdef USE_PROTOCOL_432_PRIME_PORT + #define SSCS432_USI_SERIALIZATION +#endif + +#ifdef USE_PROTOCOL_SNIF_PRIME_PORT + #define SNIFFER_USI_SERIALIZATION +#endif + +#endif /* CONF_PRIME_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_uart_serial.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_uart_serial.h new file mode 100644 index 00000000..bb9c6a93 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_uart_serial.h @@ -0,0 +1,56 @@ +/** + * \file + * + * \brief Serial UART service configuration. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_UART_SERIAL_H_INCLUDED +#define CONF_UART_SERIAL_H_INCLUDED + +/** Console Interface */ +#define CONF_UART CONSOLE_UART +/** Console Interface ID */ +#define CONF_UART_ID CONSOLE_UART_ID +/** Baudrate setting */ +#define CONF_UART_BAUDRATE 115200UL +/** Parity setting */ +#define CONF_UART_PARITY UART_MR_PAR_NO + +#endif /* CONF_UART_SERIAL_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_usi.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_usi.h new file mode 100644 index 00000000..d7c4d872 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/conf_usi.h @@ -0,0 +1,66 @@ +/** + * \file + * + * \brief USI Layer Configuration + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef CONF_USI_H_INCLUDED +#define CONF_USI_H_INCLUDED + +#include "conf_buart_if.h" +#include "conf_busart_if.h" + +/* Microcontroller Mode */ +/* #define USI_USE_UC_MODE */ + +/* Port Communications configuration */ +#define NUM_PORTS 1 +#define PORT_0 CONF_PORT(UART_TYPE, 0, 115200, TX_UART_BUF0_SIZE, \ + RX_UART_BUF0_SIZE) + +/* USI protocols configuration. Enable/Disable protocols */ +#define NUM_PROTOCOLS 4 +#define USE_MNGP_PRIME_PORT 0 +#define USE_PROTOCOL_432_PRIME_PORT 0 +#define USE_PROTOCOL_MLME_PRIME_PORT 0 +#define USE_PROTOCOL_PLME_PRIME_PORT 0 +/* #define USE_PROTOCOL_SNIF_PRIME_PORT 0 */ + +#endif /* CONF_USI_H_INCLUDED */ diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/doxygen/doxyfile.doxygen b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/doxygen/doxyfile.doxygen new file mode 100644 index 00000000..a50d3fac --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/doxygen/doxyfile.doxygen @@ -0,0 +1,1645 @@ +# Doxyfile 1.7.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "PRIME Serial Base application for SAM4CMS-DB" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = . + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES += asf_license_start=" " +ALIASES += asf_license_stop=" " + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = YES + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = YES + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = NO + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "[WARNING]$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ../../main.c ../../../../../../common/services/clock/sam4cm/sysclk.c ../../../../../../sam/drivers/pmc/pmc.c ../../../../../../sam/drivers/pmc/sleep.c ../../../../../../common/utils/interrupt/interrupt_sam_nvic.c ../../../../../../sam/utils/cmsis/sam4cm/source/templates/system_sam4cm.c ../../../../../../common/services/serial/usart_serial.c ../../../../../../sam/drivers/uart/uart.c ../../../../../../sam/drivers/usart/usart.c ../../../../../../common/utils/stdio/read.c ../../../../../../common/utils/stdio/write.c ../../../../../../sam/services/flash_efc/flash_efc.c ../../../../../../sam/drivers/efc/efc.c ../../../../../../sam/services/plc/hal/prime/hal.c ../../../../../../sam/drivers/pio/pio.c ../../../../../../sam/drivers/pio/pio_handler.c ../../../../../../sam/drivers/gpbr/gpbr.c ../../../../../../sam/drivers/wdt/wdt.c ../../../../oss/oss_if.c ../../../../phy/atpl230/coupling_config/conf_atpl230.c ../../../../phy/atpl230/source/atpl230.c ../../../../phy/atpl230/source/atpl230_iir_filter.c ../../../../../../sam/services/plc/pplc_if/atpl230/pplc_if.c ../../../../../../sam/drivers/spi/spi.c ../../../../../../sam/drivers/pdc/pdc.c ../../../../pal/atpl230_primemac13/source/pal.c ../../../../../../sam/services/plc/pcrc/pcrc.c ../../../../mac/mac_1_3/module_config/conf_mac.c ../../../../mac/mac_1_3/source/PrimeVersion.c ../../../../../../sam/services/plc/usi/usi.c ../../../../../../sam/services/plc/buart_if/buart_if.c ../../../../../../sam/drivers/tc/tc.c ../../../../../../sam/services/plc/busart_if/busart_if.c ../../../../../freertos/freertos-7.3.0/source/FreeRTOS_CLI.c ../../../../../freertos/freertos-7.3.0/source/list.c ../../../../../freertos/freertos-7.3.0/source/portable/memmang/heap_4.c ../../../../../freertos/freertos-7.3.0/source/queue.c ../../../../../freertos/freertos-7.3.0/source/tasks.c ../../../../../freertos/freertos-7.3.0/source/timers.c ../../../../mac/mac_1_3/addons/serial_if/serial_if_mlme.c ../../../../mac/mac_1_3/addons/serial_if/serial_if_plme.c ../../../../mac/mac_1_3/addons/serial_if/serial_if_sniffer.c ../../../../sscs/sscs-4-32/addons/serial_if/serial_432_if.c ../../../../../../sam/boards/sam4cms_db/init.c ../FreeRTOSConfig.h ../conf_board.h ../conf_buart_if.h ../conf_busart_if.h ../conf_clock.h ../conf_example.h ../conf_oss.h ../conf_phy.h ../conf_pplc_if.h ../conf_prime.h ../conf_uart_serial.h ../conf_usi.h ../../../../../../common/services/clock/genclk.h ../../../../../../common/services/clock/osc.h ../../../../../../common/services/clock/pll.h ../../../../../../common/services/clock/sam4cm/genclk.h ../../../../../../common/services/clock/sam4cm/osc.h ../../../../../../common/services/clock/sam4cm/pll.h ../../../../../../common/services/clock/sam4cm/sysclk.h ../../../../../../common/services/clock/sysclk.h ../../../../../../sam/drivers/pmc/pmc.h ../../../../../../sam/drivers/pmc/sleep.h ../../../../../../sam/utils/compiler.h ../../../../../../sam/utils/header_files/io.h ../../../../../../sam/utils/status_codes.h ../../../../../../sam/utils/preprocessor/mrepeat.h ../../../../../../sam/utils/preprocessor/preprocessor.h ../../../../../../sam/utils/preprocessor/stringz.h ../../../../../../sam/utils/preprocessor/tpaste.h ../../../../../../common/utils/interrupt.h ../../../../../../common/utils/interrupt/interrupt_sam_nvic.h ../../../../../../common/utils/parts.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cm.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp16c_0.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp16c_1.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp8c_0.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp8c_1.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms16c_0.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms16c_1.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms4c_0.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms4c_1.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms8c_0.h ../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms8c_1.h ../../../../../../sam/utils/cmsis/sam4cm/include/system_sam4cm.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/adc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/aes.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/chipid.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/cmcc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/efc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/gpbr.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/icm.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/ipc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/matrix.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/pdc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/pio.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/pmc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/pwm.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/rstc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/rswdt.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/rtc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/rtt.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/slcdc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/smc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/spi.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/supc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/tc.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/trng.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/twi.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/uart.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/usart.h ../../../../../../sam/utils/cmsis/sam4cm/include/component/wdt.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/adc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/aes.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/chipid.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/cmcc0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/cmcc1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/efc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/gpbr.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/icm.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/ipc0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/ipc1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/matrix0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/matrix1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/pioa.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/piob.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/pioc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/pmc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/pwm.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/rstc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/rswdt.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/rtc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/rtt.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/slcdc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/smc0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/smc1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/spi0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/spi1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/supc.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/tc0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/tc1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/trng.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/twi0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/twi1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/uart0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/uart1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart0.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart1.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart2.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart3.h ../../../../../../sam/utils/cmsis/sam4cm/include/instance/wdt.h ../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cmp16c.h ../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cmp8c.h ../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms16c.h ../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms4c.h ../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms8c.h ../../../../../../common/utils/stdio/stdio_serial/stdio_serial.h ../../../../../../common/services/serial/sam_uart/uart_serial.h ../../../../../../common/services/serial/serial.h ../../../../../../sam/drivers/uart/uart.h ../../../../../../sam/drivers/usart/usart.h ../../../../../../sam/services/flash_efc/flash_efc.h ../../../../../../sam/drivers/efc/efc.h ../../../../../../sam/services/plc/hal/prime/hal.h ../../../../mac/mac_1_3/addons/bootloader/boot_regions_sam4cms16c_0.h ../../../../../../sam/drivers/pio/pio.h ../../../../../../sam/drivers/pio/pio_handler.h ../../../../../../sam/drivers/gpbr/gpbr.h ../../../../../../sam/drivers/wdt/wdt.h ../../../../oss/oss_if.h ../../../../phy/atpl230/coupling_config/conf_atpl230.h ../../../../phy/atpl230/include/atpl230.h ../../../../phy/atpl230/include/atpl230_iir_filter.h ../../../../phy/atpl230/include/atpl230_reg.h ../../../../phy/atpl230/include/atpl230_version.h ../../../../../../sam/services/plc/pplc_if/atpl230/pplc_if.h ../../../../../../common/services/ioport/ioport.h ../../../../../../common/services/ioport/sam/ioport_pio.h ../../../../../../sam/drivers/spi/spi.h ../../../../../../sam/drivers/pdc/pdc.h ../../../../../../sam/drivers/pdc/pdc_uart_example/pdc_uart_example.h ../../../../pal/atpl230_primemac13/include/pal.h ../../../../pal/atpl230_primemac13/module_config/conf_pal.h ../../../../../../sam/services/plc/pcrc/pcrc.h ../../../../mac/mac_1_3/include/bmngt.h ../../../../mac/mac_1_3/include/mngl.h ../../../../mac/mac_1_3/include/prime.h ../../../../mac/mac_1_3/module_config/conf_mac.h ../../../../sscs/sscs-4-32/include/dl432.h ../../../../sscs/sscs-4-32/include/sscs432.h ../../../../../../sam/services/plc/usi/usi.h ../../../../../../sam/services/plc/buart_if/buart_if.h ../../../../../../sam/drivers/tc/tc.h ../../../../../../sam/services/plc/busart_if/busart_if.h ../../../../../freertos/freertos-7.3.0/source/include/FreeRTOS.h ../../../../../freertos/freertos-7.3.0/source/include/FreeRTOS_CLI.h ../../../../../freertos/freertos-7.3.0/source/include/StackMacros.h ../../../../../freertos/freertos-7.3.0/source/include/croutine.h ../../../../../freertos/freertos-7.3.0/source/include/list.h ../../../../../freertos/freertos-7.3.0/source/include/mpu_wrappers.h ../../../../../freertos/freertos-7.3.0/source/include/portable.h ../../../../../freertos/freertos-7.3.0/source/include/projdefs.h ../../../../../freertos/freertos-7.3.0/source/include/queue.h ../../../../../freertos/freertos-7.3.0/source/include/semphr.h ../../../../../freertos/freertos-7.3.0/source/include/task.h ../../../../../freertos/freertos-7.3.0/source/include/timers.h ../../../../mac/mac_1_3/addons/serial_if/serial_if_mlme.h ../../../../mac/mac_1_3/addons/serial_if/serial_if_plme.h ../../../../mac/mac_1_3/addons/serial_if/serial_if_sniffer.h ../../../../sscs/sscs-4-32/addons/serial_if/serial_432_if.h ../../../../../../sam/boards/sam4cms_db/sam4cms_db.h ../../../../../../common/boards/board.h ../../../../../../sam/boards/sam4cms_db/led.h + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = *.c \ + *.h \ + *.s \ + *.S + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = ./ ../../../../../../sam/drivers/pdc/pdc_uart_example + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = YES + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 1 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvances is that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = RTF + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = YES + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = .. ../.. ../../../../../../common/services/clock ../../../../../../sam/drivers/pmc ../../../../../../sam/utils ../../../../../../sam/utils/header_files ../../../../../../sam/utils/preprocessor ../../../../../../common/utils ../../../../../../sam/utils/cmsis/sam4cm/include ../../../../../../sam/utils/cmsis/sam4cm/source/templates ../../../../../../common/utils/stdio/stdio_serial ../../../../../../common/services/serial ../../../../../../common/services/serial/sam_uart ../../../../../../sam/drivers/uart ../../../../../../sam/drivers/usart ../../../../../../sam/services/flash_efc ../../../../../../sam/drivers/efc ../../../../../../sam/services/plc/hal/prime ../../../../mac/mac_1_3/addons/bootloader ../../../../../../sam/drivers/pio ../../../../../../sam/drivers/gpbr ../../../../../../sam/drivers/wdt ../../../../oss ../../../../phy/atpl230/coupling_config ../../../../phy/atpl230/include ../../../../../../sam/services/plc/pplc_if/atpl230 ../../../../../../common/services/ioport ../../../../../../sam/drivers/spi ../../../../../../sam/drivers/pdc ../../../../../../sam/drivers/pdc/pdc_uart_example ../../../../pal/atpl230_primemac13/include ../../../../pal/atpl230_primemac13/module_config ../../../../../../sam/services/plc/pcrc ../../../../mac/mac_1_3/include ../../../../mac/mac_1_3/module_config ../../../../sscs/sscs-4-32/include ../../../../../../sam/services/plc/usi ../../../../../../sam/services/plc/buart_if ../../../../../../sam/drivers/tc ../../../../../../sam/services/plc/busart_if ../../../../../freertos/freertos-7.3.0/source/include ../../../../mac/mac_1_3/addons/serial_if ../../../../sscs/sscs-4-32/addons/serial_if ../../../../../../sam/boards ../../../../../../sam/boards/sam4cms_db ../../../../../../common/boards + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = __DOXYGEN__ __AVR32_ABI_COMPILER__ __attribute__()= __GNUC__=4 ARM_MATH_CM4=true __FREERTOS__ BOARD=SAM4CMS_DB __SAM4CMS16C_0__ __SAM4CMS16C__ + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = YES + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = YES + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = gif + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/Makefile b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/Makefile new file mode 100644 index 00000000..ae3f617b --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/Makefile @@ -0,0 +1,52 @@ +# List of available make goals: +# +# all Default target, builds the project +# clean Clean up the project +# rebuild Rebuild the project +# +# +# doc Build the documentation +# cleandoc Clean up the documentation +# rebuilddoc Rebuild the documentation +# +# Copyright (c) 2011 Atmel Corporation. All rights reserved. +# +# \asf_license_start +# +# \page License +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# 3. The name of Atmel may not be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# 4. This software may only be redistributed and used in connection with an +# Atmel microcontroller product. +# +# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR +# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +# \asf_license_stop +# + +# Include the common Makefile, which will also include the project specific +# config.mk file. +MAKEFILE_PATH = ../../../../../../sam/utils/make/Makefile.sam.in +include $(MAKEFILE_PATH) diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/asf.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/asf.h new file mode 100644 index 00000000..a2d83461 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/asf.h @@ -0,0 +1,183 @@ +/** + * \file + * + * \brief Autogenerated API include file for the Atmel Software Framework (ASF) + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef ASF_H +#define ASF_H + +/* + * This file includes all API header files for the selected drivers from ASF. + * Note: There might be duplicate includes required by more than one driver. + * + * The file is automatically generated and will be re-written when + * running the ASF driver selector tool. Any changes will be discarded. + */ +
+// From module: Common SAM compiler driver
+#include <compiler.h>
+#include <status_codes.h>
+
+// From module: EEFC - Enhanced Embedded Flash Controller
+#include <efc.h>
+
+// From module: Flash - SAM Flash Service API
+#include <flash_efc.h>
+
+// From module: FreeRTOS mini Real-Time Kernel
+#include <FreeRTOS.h>
+#include <FreeRTOS_CLI.h>
+#include <StackMacros.h>
+#include <croutine.h>
+#include <list.h>
+#include <mpu_wrappers.h>
+#include <portable.h>
+#include <projdefs.h>
+#include <queue.h>
+#include <semphr.h>
+#include <task.h>
+#include <timers.h>
+
+// From module: GPBR - General Purpose Backup Register
+#include <gpbr.h>
+
+// From module: Generic board support
+#include <board.h>
+
+// From module: IOPORT - General purpose I/O service
+#include <ioport.h>
+
+// From module: Interrupt management - SAM implementation
+#include <interrupt.h>
+
+// From module: PDC - Peripheral DMA Controller Example
+#include <pdc.h>
+
+// From module: PIO - Parallel Input/Output Controller
+#include <pio.h>
+
+// From module: PLC Buffered PDC Uart Service Interface
+#include <buart_if.h>
+
+// From module: PLC Buffered PDC Usart Service Interface
+#include <busart_if.h>
+
+// From module: PLC PRIME CRC calculation service
+#include <pcrc.h>
+
+// From module: PLC Physical Layer Interface
+#include <atpl230.h>
+#include <atpl230_reg.h>
+
+// From module: PLC Universal Serial Interface
+#include <usi.h>
+
+// From module: PMC - Power Management Controller
+#include <pmc.h>
+#include <sleep.h>
+
+// From module: PRIME Embedded Sniffer Serial Interface Module
+#include <serial_if_sniffer.h>
+
+// From module: PRIME Hardware Abstraction Layer
+#include <hal.h>
+
+// From module: PRIME IEC 61334-4-32 Convergence Layer
+#include <dl432.h>
+#include <sscs432.h>
+
+// From module: PRIME IEC 61334-4-32 Convergence Layer Serial Interface Module
+#include <serial_432_if.h>
+
+// From module: PRIME MAC Layer
+#include <bmngt.h>
+#include <mngl.h>
+#include <prime.h>
+
+// From module: PRIME MLME Serial Interface Module
+#include <serial_if_mlme.h>
+
+// From module: PRIME Operative System Support (OSS)
+#include <oss_if.h>
+
+// From module: PRIME PLME Serial Interface Module
+#include <serial_if_plme.h>
+
+// From module: Part identification macros
+#include <parts.h>
+
+// From module: Physical Abstraction Layer (PAL) interface - ATPL230 and PRIME MAC 1.3
+#include <pal.h>
+
+// From module: Proxy Power Line Communication (PLC) Controller Interface - ATPL230 implementation
+#include <pplc_if.h>
+
+// From module: SAM4CMS Demo Board LED support enabled
+#include <led.h>
+
+// From module: SPI - Serial Peripheral Interface
+#include <spi.h>
+
+// From module: Standard serial I/O (stdio) - SAM implementation
+#include <stdio_serial.h>
+
+// From module: System Clock Control - SAM4CM implementation
+#include <sysclk.h>
+
+// From module: TC - Timer Counter
+#include <tc.h>
+
+// From module: UART - Univ. Async Rec/Trans
+#include <uart.h>
+
+// From module: USART - Serial interface - SAM implementation for devices with both UART and USART
+#include <serial.h>
+
+// From module: USART - Univ. Syn Async Rec/Trans
+#include <usart.h>
+
+// From module: WDT - Watchdog Timer
+#include <wdt.h>
+
+// From module: pio_handler support enabled
+#include <pio_handler.h>
+ +#endif // ASF_H diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/config.mk b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/config.mk new file mode 100644 index 00000000..ae03ef1a --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc/config.mk @@ -0,0 +1,222 @@ +# +# Copyright (c) 2011 Atmel Corporation. All rights reserved. +# +# \asf_license_start +# +# \page License +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# 3. The name of Atmel may not be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# 4. This software may only be redistributed and used in connection with an +# Atmel microcontroller product. +# +# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR +# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +# \asf_license_stop +# + +# Path to top level ASF directory relative to this project directory. +PRJ_PATH = ../../../../../.. + +# Target CPU architecture: cortex-m3, cortex-m4 +ARCH = cortex-m4 + +# Target part: none, sam3n4 or sam4l4aa +PART = sam4cms16c:0 + +# Application target name. Given with suffix .a for library and .elf for a +# standalone application. +TARGET_FLASH = apps_prime_base_serial_flash.elf +TARGET_SRAM = apps_prime_base_serial_sram.elf + +# List of C source files. +CSRCS = \ + common/services/clock/sam4cm/sysclk.c \ + common/services/serial/usart_serial.c \ + common/utils/interrupt/interrupt_sam_nvic.c \ + common/utils/stdio/read.c \ + common/utils/stdio/write.c \ + sam/boards/sam4cms_db/init.c \ + sam/drivers/efc/efc.c \ + sam/drivers/gpbr/gpbr.c \ + sam/drivers/pdc/pdc.c \ + sam/drivers/pio/pio.c \ + sam/drivers/pio/pio_handler.c \ + sam/drivers/pmc/pmc.c \ + sam/drivers/pmc/sleep.c \ + sam/drivers/spi/spi.c \ + sam/drivers/tc/tc.c \ + sam/drivers/uart/uart.c \ + sam/drivers/usart/usart.c \ + sam/drivers/wdt/wdt.c \ + sam/services/flash_efc/flash_efc.c \ + sam/services/plc/buart_if/buart_if.c \ + sam/services/plc/busart_if/busart_if.c \ + sam/services/plc/hal/prime/hal.c \ + sam/services/plc/pcrc/pcrc.c \ + sam/services/plc/pplc_if/atpl230/pplc_if.c \ + sam/services/plc/usi/usi.c \ + sam/utils/cmsis/sam4cm/source/templates/gcc/startup_sam4cm.c \ + sam/utils/cmsis/sam4cm/source/templates/system_sam4cm.c \ + sam/utils/syscalls/gcc/syscalls.c \ + thirdparty/freertos/freertos-7.3.0/source/FreeRTOS_CLI.c \ + thirdparty/freertos/freertos-7.3.0/source/list.c \ + thirdparty/freertos/freertos-7.3.0/source/portable/gcc/sam/port.c \ + thirdparty/freertos/freertos-7.3.0/source/portable/memmang/heap_4.c \ + thirdparty/freertos/freertos-7.3.0/source/queue.c \ + thirdparty/freertos/freertos-7.3.0/source/tasks.c \ + thirdparty/freertos/freertos-7.3.0/source/timers.c \ + thirdparty/prime/apps/prime_base_serial/main.c \ + thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_mlme.c \ + thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_plme.c \ + thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_sniffer.c \ + thirdparty/prime/mac/mac_1_3/module_config/conf_mac.c \ + thirdparty/prime/mac/mac_1_3/source/PrimeVersion.c \ + thirdparty/prime/oss/oss_if.c \ + thirdparty/prime/pal/atpl230_primemac13/source/pal.c \ + thirdparty/prime/phy/atpl230/coupling_config/conf_atpl230.c \ + thirdparty/prime/phy/atpl230/source/atpl230.c \ + thirdparty/prime/phy/atpl230/source/atpl230_iir_filter.c \ + thirdparty/prime/sscs/sscs-4-32/addons/serial_if/serial_432_if.c + +# List of assembler source files. +ASSRCS = + +# List of include paths. +INC_PATH = \ + common/boards \ + common/services/clock \ + common/services/ioport \ + common/services/serial \ + common/services/serial/sam_uart \ + common/utils \ + common/utils/stdio/stdio_serial \ + sam/boards \ + sam/boards/sam4cms_db \ + sam/drivers/efc \ + sam/drivers/gpbr \ + sam/drivers/pdc \ + sam/drivers/pdc/pdc_uart_example \ + sam/drivers/pio \ + sam/drivers/pmc \ + sam/drivers/spi \ + sam/drivers/tc \ + sam/drivers/uart \ + sam/drivers/usart \ + sam/drivers/wdt \ + sam/services/flash_efc \ + sam/services/plc/buart_if \ + sam/services/plc/busart_if \ + sam/services/plc/hal/prime \ + sam/services/plc/pcrc \ + sam/services/plc/pplc_if/atpl230 \ + sam/services/plc/usi \ + sam/utils \ + sam/utils/cmsis/sam4cm/include \ + sam/utils/cmsis/sam4cm/source/templates \ + sam/utils/header_files \ + sam/utils/preprocessor \ + thirdparty/CMSIS/Include \ + thirdparty/CMSIS/Lib/GCC \ + thirdparty/freertos/freertos-7.3.0/source/include \ + thirdparty/freertos/freertos-7.3.0/source/portable/gcc/sam \ + thirdparty/prime/apps/prime_base_serial \ + thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db \ + thirdparty/prime/mac/mac_1_3/addons/bootloader \ + thirdparty/prime/mac/mac_1_3/addons/serial_if \ + thirdparty/prime/mac/mac_1_3/include \ + thirdparty/prime/mac/mac_1_3/module_config \ + thirdparty/prime/oss \ + thirdparty/prime/pal/atpl230_primemac13/include \ + thirdparty/prime/pal/atpl230_primemac13/module_config \ + thirdparty/prime/phy/atpl230/coupling_config \ + thirdparty/prime/phy/atpl230/include \ + thirdparty/prime/sscs/sscs-4-32/addons/serial_if \ + thirdparty/prime/sscs/sscs-4-32/include \ + thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/gcc + +# Additional search paths for libraries. +LIB_PATH = \ + thirdparty/CMSIS/Lib/GCC \ + thirdparty/prime/mac/mac_1_3/libs/gcc \ + thirdparty/prime/sscs/sscs-4-32/libs/gcc + +# List of libraries to use during linking. +LIBS = \ + arm_cortexM4l_math \ + sam4c-mac13-bn-gcc \ + sam4c-sscs432-bn-gcc \ + m + +# Path relative to top level directory pointing to a linker script. +LINKER_SCRIPT_FLASH = sam/utils/linker_scripts/sam4cm/gcc/sam4cms16c_0_flash.ld +LINKER_SCRIPT_SRAM = sam/utils/linker_scripts/sam4cm/gcc/sam4cms16c_0_sram.ld + +# Path relative to top level directory pointing to a linker script. +DEBUG_SCRIPT_FLASH = sam/boards/sam4cms_db/debug_scripts/gcc/sam4cms_db_flash_0.gdb +DEBUG_SCRIPT_SRAM = sam/boards/sam4cms_db/debug_scripts/gcc/sam4cms_db_sram_0.gdb + +# Project type parameter: all, sram or flash +PROJECT_TYPE = flash + +# Additional options for debugging. By default the common Makefile.in will +# add -g3. +DBGFLAGS = + +# Application optimization used during compilation and linking: +# -O0, -O1, -O2, -O3 or -Os +OPTIMIZATION = -O1 + +# Extra flags to use when archiving. +ARFLAGS = + +# Extra flags to use when assembling. +ASFLAGS = + +# Extra flags to use when compiling. +CFLAGS = + +# Extra flags to use when preprocessing. +# +# Preprocessor symbol definitions +# To add a definition use the format "-D name[=definition]". +# To cancel a definition use the format "-U name". +# +# The most relevant symbols to define for the preprocessor are: +# BOARD Target board in use, see boards/board.h for a list. +# EXT_BOARD Optional extension board in use, see boards/board.h for a list. +CPPFLAGS = \ + -D ARM_MATH_CM4=true \ + -D BOARD=SAM4CMS_DB \ + -D __FREERTOS__ \ + -D __SAM4CMS16C_0__ \ + -D printf=iprintf \ + -D scanf=iscanf + +# Extra flags to use when linking +LDFLAGS = \ + +# Pre- and post-build commands +PREBUILD_CMD = +POSTBUILD_CMD =
\ No newline at end of file diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial.eww b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial.eww new file mode 100644 index 00000000..27264b65 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial.eww @@ -0,0 +1,6 @@ +<workspace> + <batchBuild></batchBuild> + <project> + <path>$WS_DIR$\apps_prime_base_serial_flash.ewp</path> + </project> +</workspace> diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewd b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewd new file mode 100644 index 00000000..65f68887 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewd @@ -0,0 +1,1655 @@ +<project> + <fileVersion>2</fileVersion> + <configuration> + <name>Debug</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>1</state> + </option> + <option> + <name>MacFile</name> + <state>$PROJ_DIR$\../../../../../../sam/boards/sam4cms_db/debug_scripts/iar/sam4cms_db_flash_0.mac</state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\ATSAM4CMS16C_0.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>1</state> + </option> + <option> + <name>OCProductVersion</name> + <state>6.10.5.52324</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>6.10.5.52324</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\Atmel\sam4cms16c\sam4cms16c-flash.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>12</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>JLinkSpeed</name> + <state>32</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>32</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>5</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCRDIUseETM</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>Browse to your third-party driver</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>1</state> + </option> + <option> + <name>MacFile</name> + <state>$PROJ_DIR$\../../../../../../sam/boards/sam4cms_db/debug_scripts/iar/sam4cms_db_flash_0.mac</state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\Atmel\ATSAM4CMS16C_0.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>1</state> + </option> + <option> + <name>OCProductVersion</name> + <state>6.10.5.52324</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state></state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\Atmel\sam4cms16c\sam4cms16c-flash.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>12</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>32</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>32</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>5</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCRDIUseETM</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> +</project> diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewp b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewp new file mode 100644 index 00000000..8616b5a2 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/apps_prime_base_serial_flash.ewp @@ -0,0 +1,2913 @@ +<project> + <fileVersion>2</fileVersion> + <configuration> + <name>Debug</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>21</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>ExePath</name> + <state>Debug\Exe</state> + </option> + <option> + <name>ObjPath</name> + <state>Debug\Obj</state> + </option> + <option> + <name>ListPath</name> + <state>Debug\List</state> + </option> + <option> + <name>Variant</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>6</state> + </option> + <option> + <name>Input description</name> + <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>3</state> + </option> + <option> + <name>Output description</name> + <state>No specifier a, A.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>5.10.0.159</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>6.21.1.52845</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>ATSAM4CMS16C_0 Atmel ATSAM4CMS16C Core0</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>1</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>27</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCDefines</name> + <state>__FREERTOS__</state> + <state>__SAM4CMS16C_0__</state> + <state>ARM_MATH_CM4=true</state> + <state>BOARD=SAM4CMS_DB</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>1</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>0</version> + <state>1111111</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>1</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>0</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$/../..</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/include</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pmc</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/efc</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/module_config</state> + <state>$PROJ_DIR$/../../../../oss</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/module_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/gpbr</state> + <state>$PROJ_DIR$/../../../../../../common/services/clock</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates</state> + <state>$PROJ_DIR$/../../../../../../sam/services/flash_efc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/spi</state> + <state>$PROJ_DIR$/../../../../../../sam/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/bootloader</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../common/utils/stdio/stdio_serial</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/wdt</state> + <state>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc_uart_example</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/uart</state> + <state>$PROJ_DIR$/../../../../../../sam/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/tc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/usart</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial/sam_uart</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/coupling_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/ioport</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pio</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/usi</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccRelaxedFpPrecision</name> + <state>0</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state>1</state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>__FREERTOS__</state> + <state>__SAM4CMS16C_0__</state> + <state>ARM_MATH_CM4=true</state> + <state>BOARD=SAM4CMS_DB</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$/../..</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/include</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pmc</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/efc</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/module_config</state> + <state>$PROJ_DIR$/../../../../oss</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/module_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/gpbr</state> + <state>$PROJ_DIR$/../../../../../../common/services/clock</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates</state> + <state>$PROJ_DIR$/../../../../../../sam/services/flash_efc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/spi</state> + <state>$PROJ_DIR$/../../../../../../sam/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/bootloader</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../common/utils/stdio/stdio_serial</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/wdt</state> + <state>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc_uart_example</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/uart</state> + <state>$PROJ_DIR$/../../../../../../sam/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/tc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/usart</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial/sam_uart</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/coupling_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/ioport</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pio</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/usi</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>2</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>apps_prime_base_serial_flash.bin</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>12</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>IlinkOutputFile</name> + <state>apps_prime_base_serial_flash.out</state> + </option> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$/../../../../../../sam/utils/linker_scripts/sam4cm/iar/sam4cms16c_0_flash.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>1</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>0</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>1</state> + </option> + <option> + <name>IlinkExtraOptions</name> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcAlgo</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>0</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>0</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>21</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>Release\Exe</state> + </option> + <option> + <name>ObjPath</name> + <state>Release\Obj</state> + </option> + <option> + <name>ListPath</name> + <state>Release\List</state> + </option> + <option> + <name>Variant</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>6</state> + </option> + <option> + <name>Input description</name> + <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>3</state> + </option> + <option> + <name>Output description</name> + <state>No specifier a, A.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>5.10.0.159</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>6.21.1.52845</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>ATSAM4CMS16C_0 Atmel ATSAM4CMS16C Core0</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>19</version> + <state>37</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>1</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>27</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCDefines</name> + <state>__FREERTOS__</state> + <state>__SAM4CMS16C_0__</state> + <state>ARM_MATH_CM4=true</state> + <state>BOARD=SAM4CMS_DB</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>1</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>0</version> + <state>1111111</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>0</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>1</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>0</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$/../..</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/include</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pmc</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/efc</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/module_config</state> + <state>$PROJ_DIR$/../../../../oss</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/module_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/gpbr</state> + <state>$PROJ_DIR$/../../../../../../common/services/clock</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates</state> + <state>$PROJ_DIR$/../../../../../../sam/services/flash_efc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/spi</state> + <state>$PROJ_DIR$/../../../../../../sam/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/bootloader</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../common/utils/stdio/stdio_serial</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/wdt</state> + <state>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc_uart_example</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/uart</state> + <state>$PROJ_DIR$/../../../../../../sam/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/tc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/usart</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial/sam_uart</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/coupling_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/ioport</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pio</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/usi</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccRelaxedFpPrecision</name> + <state>0</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state>0</state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>__FREERTOS__</state> + <state>__SAM4CMS16C_0__</state> + <state>ARM_MATH_CM4=true</state> + <state>BOARD=SAM4CMS_DB</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$/../..</state> + <state>$PROJ_DIR$/..</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/include</state> + <state>$PROJ_DIR$/../../../../../../common/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/preprocessor</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pmc</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/header_files</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/efc</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/module_config</state> + <state>$PROJ_DIR$/../../../../oss</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/module_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/gpbr</state> + <state>$PROJ_DIR$/../../../../../../common/services/clock</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates</state> + <state>$PROJ_DIR$/../../../../../../sam/services/flash_efc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/spi</state> + <state>$PROJ_DIR$/../../../../../../sam/boards</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc</state> + <state>$PROJ_DIR$/../../../../../../common/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/bootloader</state> + <state>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include</state> + <state>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../common/utils/stdio/stdio_serial</state> + <state>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/wdt</state> + <state>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc_uart_example</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/uart</state> + <state>$PROJ_DIR$/../../../../../../sam/utils</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/tc</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/usart</state> + <state>$PROJ_DIR$/../../../../../../common/services/serial/sam_uart</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if</state> + <state>$PROJ_DIR$/../../../../phy/atpl230/coupling_config</state> + <state>$PROJ_DIR$/../../../../../../common/services/ioport</state> + <state>$PROJ_DIR$/../../../../../../sam/drivers/pio</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/usi</state> + <state>$PROJ_DIR$/../../../../pal/atpl230_primemac13/include</state> + <state>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include</state> + <state>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc</state> + <state>$PROJ_DIR$/.</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>2</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>apps_prime_base_serial_flash.bin</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>12</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkOutputFile</name> + <state>apps_prime_base_serial_flash.out</state> + </option> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$/../../../../../../sam/utils/linker_scripts/sam4cm/iar/sam4cms16c_0_flash.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>0</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>1</state> + </option> + <option> + <name>IlinkExtraOptions</name> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcAlgo</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data></data> + </settings> + </configuration> + <group> + <name>thirdparty</name> + <group> + <name>prime</name> + <group> + <name>sscs</name> + <group> + <name>sscs-4-32</name> + <group> + <name>libs</name> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/../../../../sscs/sscs-4-32/libs/iar/libsam4c-sscs432-bn-iar.a</name> + </file> + </group> + </group> + <group> + <name>addons</name> + <group> + <name>serial_if</name> + <file> + <name>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if/serial_432_if.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../sscs/sscs-4-32/addons/serial_if/serial_432_if.h</name> + </file> + </group> + </group> + <group> + <name>include</name> + <file> + <name>$PROJ_DIR$/../../../../sscs/sscs-4-32/include/dl432.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../sscs/sscs-4-32/include/sscs432.h</name> + </file> + </group> + </group> + </group> + <group> + <name>mac</name> + <group> + <name>mac_1_3</name> + <group> + <name>libs</name> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/libs/iar/libsam4c-mac13-bn-iar.a</name> + </file> + </group> + </group> + <group> + <name>addons</name> + <group> + <name>serial_if</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_plme.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_sniffer.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_mlme.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_sniffer.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_plme.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/serial_if/serial_if_mlme.h</name> + </file> + </group> + <group> + <name>bootloader</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/addons/bootloader/boot_regions_sam4cms16c_0.h</name> + </file> + </group> + </group> + <group> + <name>source</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/source/PrimeVersion.c</name> + </file> + </group> + <group> + <name>module_config</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/module_config/conf_mac.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/module_config/conf_mac.h</name> + </file> + </group> + <group> + <name>include</name> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/include/bmngt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/include/mngl.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../mac/mac_1_3/include/prime.h</name> + </file> + </group> + </group> + </group> + <group> + <name>oss</name> + <file> + <name>$PROJ_DIR$/../../../../oss/oss_if.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../oss/oss_if.h</name> + </file> + </group> + <group> + <name>phy</name> + <group> + <name>atpl230</name> + <group> + <name>source</name> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/source/atpl230_iir_filter.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/source/atpl230.c</name> + </file> + </group> + <group> + <name>coupling_config</name> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/coupling_config/conf_atpl230.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/coupling_config/conf_atpl230.h</name> + </file> + </group> + <group> + <name>include</name> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/include/atpl230.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/include/atpl230_reg.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/include/atpl230_iir_filter.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../phy/atpl230/include/atpl230_version.h</name> + </file> + </group> + </group> + </group> + <group> + <name>pal</name> + <group> + <name>atpl230_primemac13</name> + <group> + <name>source</name> + <file> + <name>$PROJ_DIR$/../../../../pal/atpl230_primemac13/source/pal.c</name> + </file> + </group> + <group> + <name>module_config</name> + <file> + <name>$PROJ_DIR$/../../../../pal/atpl230_primemac13/module_config/conf_pal.h</name> + </file> + </group> + <group> + <name>include</name> + <file> + <name>$PROJ_DIR$/../../../../pal/atpl230_primemac13/include/pal.h</name> + </file> + </group> + </group> + </group> + <group> + <name>apps</name> + <group> + <name>prime_base_serial</name> + <file> + <name>$PROJ_DIR$/../../main.c</name> + </file> + <group> + <name>sam4cms16c_sam4cms_db</name> + <file> + <name>$PROJ_DIR$/../conf_board.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_buart_if.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_usi.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_uart_serial.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_busart_if.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_prime.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_oss.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_pplc_if.h</name> + </file> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/asf.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../conf_example.h</name> + </file> + <file> + <name>$PROJ_DIR$/../FreeRTOSConfig.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_clock.h</name> + </file> + <file> + <name>$PROJ_DIR$/../conf_phy.h</name> + </file> + </group> + </group> + </group> + </group> + <group> + <name>freertos</name> + <group> + <name>freertos-7.3.0</name> + <group> + <name>source</name> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/FreeRTOS_CLI.c</name> + </file> + <group> + <name>portable</name> + <group> + <name>iar</name> + <group> + <name>sam</name> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam/port.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam/portasm.s</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/iar/sam/portmacro.h</name> + </file> + </group> + </group> + <group> + <name>memmang</name> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/portable/memmang/heap_4.c</name> + </file> + </group> + </group> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/tasks.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/list.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/timers.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/queue.c</name> + </file> + <group> + <name>include</name> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/queue.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/semphr.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/StackMacros.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/FreeRTOS.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/mpu_wrappers.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/portable.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/list.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/timers.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/FreeRTOS_CLI.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/projdefs.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/croutine.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../freertos/freertos-7.3.0/source/include/task.h</name> + </file> + </group> + </group> + </group> + </group> + </group> + <group> + <name>common</name> + <group> + <name>utils</name> + <group> + <name>stdio</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/stdio/write.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/stdio/read.c</name> + </file> + <group> + <name>stdio_serial</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/stdio/stdio_serial/stdio_serial.h</name> + </file> + </group> + </group> + <group> + <name>interrupt</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt/interrupt_sam_nvic.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/interrupt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/utils/parts.h</name> + </file> + </group> + <group> + <name>services</name> + <group> + <name>clock</name> + <group> + <name>sam4cm</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sam4cm/sysclk.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sam4cm/sysclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sam4cm/pll.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sam4cm/osc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sam4cm/genclk.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/osc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/genclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/sysclk.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/clock/pll.h</name> + </file> + </group> + <group> + <name>serial</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/serial/usart_serial.c</name> + </file> + <group> + <name>sam_uart</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/serial/sam_uart/uart_serial.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/serial/serial.h</name> + </file> + </group> + <group> + <name>ioport</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/ioport/ioport.h</name> + </file> + <group> + <name>sam</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/services/ioport/sam/ioport_pio.h</name> + </file> + </group> + </group> + </group> + <group> + <name>boards</name> + <file> + <name>$PROJ_DIR$/../../../../../../common/boards/board.h</name> + </file> + </group> + </group> + <group> + <name>sam</name> + <group> + <name>services</name> + <group> + <name>plc</name> + <group> + <name>hal</name> + <group> + <name>prime</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime/hal.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/hal/prime/hal.h</name> + </file> + </group> + </group> + <group> + <name>pplc_if</name> + <group> + <name>atpl230</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230/pplc_if.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/pplc_if/atpl230/pplc_if.h</name> + </file> + </group> + </group> + <group> + <name>pcrc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc/pcrc.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/pcrc/pcrc.h</name> + </file> + </group> + <group> + <name>usi</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/usi/usi.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/usi/usi.h</name> + </file> + </group> + <group> + <name>busart_if</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if/busart_if.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/busart_if/busart_if.h</name> + </file> + </group> + <group> + <name>buart_if</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if/buart_if.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/plc/buart_if/buart_if.h</name> + </file> + </group> + </group> + <group> + <name>flash_efc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/flash_efc/flash_efc.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/services/flash_efc/flash_efc.h</name> + </file> + </group> + </group> + <group> + <name>drivers</name> + <group> + <name>uart</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/uart/uart.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/uart/uart.h</name> + </file> + </group> + <group> + <name>pmc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pmc/sleep.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pmc/pmc.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pmc/sleep.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pmc/pmc.h</name> + </file> + </group> + <group> + <name>efc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/efc/efc.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/efc/efc.h</name> + </file> + </group> + <group> + <name>wdt</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/wdt/wdt.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/wdt/wdt.h</name> + </file> + </group> + <group> + <name>tc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/tc/tc.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/tc/tc.h</name> + </file> + </group> + <group> + <name>spi</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/spi/spi.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/spi/spi.h</name> + </file> + </group> + <group> + <name>usart</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/usart/usart.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/usart/usart.h</name> + </file> + </group> + <group> + <name>pio</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pio/pio.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pio/pio_handler.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pio/pio_handler.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pio/pio.h</name> + </file> + </group> + <group> + <name>gpbr</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/gpbr/gpbr.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/gpbr/gpbr.h</name> + </file> + </group> + <group> + <name>pdc</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc.c</name> + </file> + <group> + <name>pdc_uart_example</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc_uart_example/pdc_uart_example.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam/drivers/pdc/pdc.h</name> + </file> + </group> + </group> + <group> + <name>boards</name> + <group> + <name>sam4cms_db</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db/init.c</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db/sam4cms_db.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/boards/sam4cms_db/led.h</name> + </file> + </group> + </group> + <group> + <name>utils</name> + <group> + <name>cmsis</name> + <group> + <name>sam4cm</name> + <group> + <name>source</name> + <group> + <name>templates</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates/system_sam4cm.c</name> + </file> + <group> + <name>iar</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/source/templates/iar/startup_sam4cm.c</name> + </file> + </group> + </group> + </group> + <group> + <name>include</name> + <group> + <name>instance</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/slcdc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/trng.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/uart1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/adc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/tc0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/tc1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/chipid.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/ipc0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/wdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/rswdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/uart0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/pwm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/icm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/pmc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/rstc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/spi1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart2.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/smc0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/efc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/rtc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/supc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/matrix0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/spi0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/twi1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/piob.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/cmcc1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/aes.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart3.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/pioc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/smc1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/pioa.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/matrix1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/rtt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/twi0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/gpbr.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/usart1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/ipc1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/instance/cmcc0.h</name> + </file> + </group> + <group> + <name>component</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/chipid.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/rtt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/tc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/pmc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/pio.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/spi.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/uart.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/trng.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/supc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/smc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/twi.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/icm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/cmcc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/aes.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/wdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/gpbr.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/rswdt.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/usart.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/efc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/ipc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/pdc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/rstc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/matrix.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/adc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/rtc.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/pwm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/component/slcdc.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms4c_1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms8c_1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp16c_1.h</name> + </file> + <group> + <name>pio</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cmp8c.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms8c.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms16c.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cms4c.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/pio/sam4cmp16c.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms4c_0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp8c_1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp16c_0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms16c_0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cm.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms8c_0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cms16c_1.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/sam4cmp8c_0.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/cmsis/sam4cm/include/system_sam4cm.h</name> + </file> + </group> + </group> + </group> + <group> + <name>preprocessor</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/preprocessor/mrepeat.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/preprocessor/preprocessor.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/preprocessor/tpaste.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/preprocessor/stringz.h</name> + </file> + </group> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/compiler.h</name> + </file> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/status_codes.h</name> + </file> + <group> + <name>header_files</name> + <file> + <name>$PROJ_DIR$/../../../../../../sam/utils/header_files/io.h</name> + </file> + </group> + </group> + </group> +</project> diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/asf.h b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/asf.h new file mode 100644 index 00000000..a2d83461 --- /dev/null +++ b/thirdparty/prime/apps/prime_base_serial/sam4cms16c_sam4cms_db/iar/asf.h @@ -0,0 +1,183 @@ +/** + * \file + * + * \brief Autogenerated API include file for the Atmel Software Framework (ASF) + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef ASF_H +#define ASF_H + +/* + * This file includes all API header files for the selected drivers from ASF. + * Note: There might be duplicate includes required by more than one driver. + * + * The file is automatically generated and will be re-written when + * running the ASF driver selector tool. Any changes will be discarded. + */ +
+// From module: Common SAM compiler driver
+#include <compiler.h>
+#include <status_codes.h>
+
+// From module: EEFC - Enhanced Embedded Flash Controller
+#include <efc.h>
+
+// From module: Flash - SAM Flash Service API
+#include <flash_efc.h>
+
+// From module: FreeRTOS mini Real-Time Kernel
+#include <FreeRTOS.h>
+#include <FreeRTOS_CLI.h>
+#include <StackMacros.h>
+#include <croutine.h>
+#include <list.h>
+#include <mpu_wrappers.h>
+#include <portable.h>
+#include <projdefs.h>
+#include <queue.h>
+#include <semphr.h>
+#include <task.h>
+#include <timers.h>
+
+// From module: GPBR - General Purpose Backup Register
+#include <gpbr.h>
+
+// From module: Generic board support
+#include <board.h>
+
+// From module: IOPORT - General purpose I/O service
+#include <ioport.h>
+
+// From module: Interrupt management - SAM implementation
+#include <interrupt.h>
+
+// From module: PDC - Peripheral DMA Controller Example
+#include <pdc.h>
+
+// From module: PIO - Parallel Input/Output Controller
+#include <pio.h>
+
+// From module: PLC Buffered PDC Uart Service Interface
+#include <buart_if.h>
+
+// From module: PLC Buffered PDC Usart Service Interface
+#include <busart_if.h>
+
+// From module: PLC PRIME CRC calculation service
+#include <pcrc.h>
+
+// From module: PLC Physical Layer Interface
+#include <atpl230.h>
+#include <atpl230_reg.h>
+
+// From module: PLC Universal Serial Interface
+#include <usi.h>
+
+// From module: PMC - Power Management Controller
+#include <pmc.h>
+#include <sleep.h>
+
+// From module: PRIME Embedded Sniffer Serial Interface Module
+#include <serial_if_sniffer.h>
+
+// From module: PRIME Hardware Abstraction Layer
+#include <hal.h>
+
+// From module: PRIME IEC 61334-4-32 Convergence Layer
+#include <dl432.h>
+#include <sscs432.h>
+
+// From module: PRIME IEC 61334-4-32 Convergence Layer Serial Interface Module
+#include <serial_432_if.h>
+
+// From module: PRIME MAC Layer
+#include <bmngt.h>
+#include <mngl.h>
+#include <prime.h>
+
+// From module: PRIME MLME Serial Interface Module
+#include <serial_if_mlme.h>
+
+// From module: PRIME Operative System Support (OSS)
+#include <oss_if.h>
+
+// From module: PRIME PLME Serial Interface Module
+#include <serial_if_plme.h>
+
+// From module: Part identification macros
+#include <parts.h>
+
+// From module: Physical Abstraction Layer (PAL) interface - ATPL230 and PRIME MAC 1.3
+#include <pal.h>
+
+// From module: Proxy Power Line Communication (PLC) Controller Interface - ATPL230 implementation
+#include <pplc_if.h>
+
+// From module: SAM4CMS Demo Board LED support enabled
+#include <led.h>
+
+// From module: SPI - Serial Peripheral Interface
+#include <spi.h>
+
+// From module: Standard serial I/O (stdio) - SAM implementation
+#include <stdio_serial.h>
+
+// From module: System Clock Control - SAM4CM implementation
+#include <sysclk.h>
+
+// From module: TC - Timer Counter
+#include <tc.h>
+
+// From module: UART - Univ. Async Rec/Trans
+#include <uart.h>
+
+// From module: USART - Serial interface - SAM implementation for devices with both UART and USART
+#include <serial.h>
+
+// From module: USART - Univ. Syn Async Rec/Trans
+#include <usart.h>
+
+// From module: WDT - Watchdog Timer
+#include <wdt.h>
+
+// From module: pio_handler support enabled
+#include <pio_handler.h>
+ +#endif // ASF_H |