diff options
Diffstat (limited to 'src/target/firmware/include/calypso/l1_environment.h')
| -rw-r--r-- | src/target/firmware/include/calypso/l1_environment.h | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/src/target/firmware/include/calypso/l1_environment.h b/src/target/firmware/include/calypso/l1_environment.h new file mode 100644 index 00000000..2d1f8d97 --- /dev/null +++ b/src/target/firmware/include/calypso/l1_environment.h @@ -0,0 +1,365 @@ +#include <stdint.h> + +typedef unsigned short API; +typedef signed short API_SIGNED; + +#define FAR + +#define CHIPSET 12 +#define DSP 36 +#define ANLG_FAM 2 /* Iota */ + +/* MFTAB */ +#define L1_MAX_FCT 5 /* Max number of fctions in a frame */ +#define MFTAB_SIZE 20 + +#define NBMAX_CARRIER 174+374 /* Number of carriers (GSM-Ext + DCS */ + +#define DPAGC_FIFO_LEN 4 + +#define SIZE_HIST 10 + +#if !L1_GPRS +# define NBR_DL_L1S_TASKS 32 +#else +# define NBR_DL_L1S_TASKS 45 +#endif + +#define NBR_L1A_PROCESSES 46 + +#define W_A_DSP_IDLE3 1 + + + +// Identifier for all DSP tasks. +// ...RX & TX tasks identifiers. +#define NO_DSP_TASK 0 // No task. +#define NP_DSP_TASK 21 // Normal Paging reading task. +#define EP_DSP_TASK 22 // Extended Paging reading task. +#define NBS_DSP_TASK 19 // Normal BCCH serving reading task. +#define EBS_DSP_TASK 20 // Extended BCCH serving reading task. +#define NBN_DSP_TASK 17 // Normal BCCH neighbour reading task. +#define EBN_DSP_TASK 18 // Extended BCCH neighbour reading task. +#define ALLC_DSP_TASK 24 // CCCH reading task while performing FULL BCCH/CCCH reading task. +#define CB_DSP_TASK 25 // CBCH reading task. +#define DDL_DSP_TASK 26 // SDCCH/D (data) reading task. +#define ADL_DSP_TASK 27 // SDCCH/A (SACCH) reading task. +#define DUL_DSP_TASK 12 // SDCCH/D (data) transmit task. +#define AUL_DSP_TASK 11 // SDCCH/A (SACCH) transmit task. +#define RACH_DSP_TASK 10 // RACH transmit task. +#define TCHT_DSP_TASK 13 // TCH Traffic data DSP task id (RX or TX) +#define TCHA_DSP_TASK 14 // TCH SACCH data DSP task id (RX or TX) +#define TCHD_DSP_TASK 28 // TCH Traffic data DSP task id (RX or TX) + +#define TCH_DTX_UL 15 // Replace UL task in DSP->MCU com. to say "burst not transmitted". + +#if (L1_GPRS) + // Identifier for DSP tasks Packet dedicated. + // ...RX & TX tasks identifiers. + //------------------------------------------------------------------------ + // WARNING ... Need to aligned following macro with MCU/DSP GPRS Interface + //------------------------------------------------------------------------ + #define PNP_DSP_TASK 30 + #define PEP_DSP_TASK 31 + #define PALLC_DSP_TASK 32 + #define PBS_DSP_TASK 33 + + #define PTCCH_DSP_TASK 33 + +#endif + +// Identifier for measurement, FB / SB search tasks. +// Values 1,2,3 reserved for "number of measurements". +#define FB_DSP_TASK 5 // Freq. Burst reading task in Idle mode. +#define SB_DSP_TASK 6 // Sync. Burst reading task in Idle mode. +#define TCH_FB_DSP_TASK 8 // Freq. Burst reading task in Dedicated mode. +#define TCH_SB_DSP_TASK 9 // Sync. Burst reading task in Dedicated mode. +#define IDLE1 1 + +// Debug tasks +#define CHECKSUM_DSP_TASK 33 +#define TST_NDB 35 // Checksum DSP->MCU +#define TST_DB 36 // DB communication check +#define INIT_VEGA 37 +#define DSP_LOOP_C 38 + +// Identifier for measurement, FB / SB search tasks. +// Values 1,2,3 reserved for "number of measurements". +#define TCH_LOOP_A 31 +#define TCH_LOOP_B 32 + +// bits in d_gsm_bgd_mgt - background task management +#define B_DSPBGD_RECO 1 // start of reco in dsp background +#define B_DSPBGD_UPD 2 // start of alignement update in dsp background +#define B_DSPBGD_STOP_RECO 256 // stop of reco in dsp background +#define B_DSPBGD_STOP_UPD 512 // stop of alignement update in dsp background + +// bit in d_pll_config +#define B_32KHZ_CALIB (1 << 14) // force DSP in Idle1 during 32 khz calibration +// **************************************************************** +// NDB AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS +// **************************************************************** +// bits in d_tch_mode +#define B_EOTD (1 << 0) // EOTD mode +#define B_PLAY_UL (1 << 3) // Play UL +#define B_DCO_ON (1 << 4) // DCO ON/OFF +#define B_AUDIO_ASYNC (1 << 1) // WCP reserved + +// **************************************************************** +// PARAMETER AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS +// **************************************************************** +#define C_POND_RED 1L +// below values are defined in the file l1_time.h +//#define D_NSUBB_IDLE 296L +//#define D_NSUBB_DEDIC 30L +#define D_FB_THR_DET_IACQ 0x3333L +#define D_FB_THR_DET_TRACK 0x28f6L +#define D_DC_OFF_THRES 0x7fffL +#define D_DUMMY_THRES 17408L +#define D_DEM_POND_GEWL 26624L +#define D_DEM_POND_RED 20152L +#define D_HOLE 0L +#define D_TRANSFER_RATE 0x6666L + +// Full Rate vocoder definitions. +#define D_MACCTHRESH1 7872L +#define D_MLDT -4L +#define D_MACCTHRESH 7872L +#define D_GU 5772L +#define D_GO 7872L +#define D_ATTMAX 53L +#define D_SM -892L +#define D_B 208L +#define D_SD_MIN_THR_TCHFS 15L //(24L *C_POND_RED) +#define D_MA_MIN_THR_TCHFS 738L //(1200L *C_POND_RED) +#define D_MD_MAX_THR_TCHFS 1700L //(2000L *C_POND_RED) +#define D_MD1_MAX_THR_TCHFS 99L //(160L *C_POND_RED) + +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + // Frequency burst definitions + #define D_FB_MARGIN_BEG 24 + #define D_FB_MARGIN_END 22 + + // V42bis definitions + #define D_V42B_SWITCH_HYST 16L + #define D_V42B_SWITCH_MIN 64L + #define D_V42B_SWITCH_MAX 250L + #define D_V42B_RESET_DELAY 10L + + // Latencies definitions + #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + // C.f. BUG1404 + #define D_LAT_MCU_BRIDGE 0x000FL + #else + #define D_LAT_MCU_BRIDGE 0x0009L + #endif + + #define D_LAT_MCU_HOM2SAM 0x000CL + + #define D_LAT_MCU_BEF_FAST_ACCESS 0x0005L + #define D_LAT_DSP_AFTER_SAM 0x0004L + + // Background Task in GSM mode: Initialization. + #define D_GSM_BGD_MGT 0L + +#if (CHIPSET == 4) + #define D_MISC_CONFIG 0L +#elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) + #define D_MISC_CONFIG 1L +#else + #define D_MISC_CONFIG 0L +#endif + +#endif + +// Hall Rate vocoder and ched definitions. + +#define D_SD_MIN_THR_TCHHS 37L +#define D_MA_MIN_THR_TCHHS 344L +#define D_MD_MAX_THR_TCHHS 2175L +#define D_MD1_MAX_THR_TCHHS 138L +#define D_SD_AV_THR_TCHHS 1845L +#define D_WED_FIL_TC 0x7c00L +#define D_WED_FIL_INI 4650L +#define D_X_MIN 15L +#define D_X_MAX 23L +#define D_Y_MIN 703L +#define D_Y_MAX 2460L +#define D_SLOPE 135L +#define D_WED_DIFF_THRESHOLD 406L +#define D_MABFI_MIN_THR_TCHHS 5320L +#define D_LDT_HR -5 +#define D_MACCTRESH_HR 6500 +#define D_MACCTRESH1_HR 6500 +#define D_GU_HR 2620 +#define D_GO_HR 3700 +#define D_B_HR 182 +#define D_SM_HR -1608 +#define D_ATTMAX_HR 53 + +// Enhanced Full Rate vocoder and ched definitions. + +#define C_MLDT_EFR -4 +#define C_MACCTHRESH_EFR 8000 +#define C_MACCTHRESH1_EFR 8000 +#define C_GU_EFR 4522 +#define C_GO_EFR 6500 +#define C_B_EFR 174 +#define C_SM_EFR -878 +#define C_ATTMAX_EFR 53 +#define D_SD_MIN_THR_TCHEFS 15L //(24L *C_POND_RED) +#define D_MA_MIN_THR_TCHEFS 738L //(1200L *C_POND_RED) +#define D_MD_MAX_THR_TCHEFS 1230L //(2000L *C_POND_RED) +#define D_MD1_MAX_THR_TCHEFS 99L //(160L *C_POND_RED) + + +// Integrated Data Services definitions. +#define D_MAX_OVSPD_UL 8 +// Detect frames containing 90% of 1s as synchro frames +#define D_SYNC_THRES 0x3f50 +// IDLE frames are only frames with 100 % of 1s +#define D_IDLE_THRES 0x4000 +#define D_M1_THRES 5 +#define D_MAX_OVSP_DL 8 + +// d_ra_act: bit field definition +#define B_F48BLK 5 + +// Mask for b_itc information (d_ra_conf) +#define CE_MASK 0x04 + +#define D_FACCH_THR 0 +#define D_DSP_TEST 0 +#define D_VERSION_NUMBER 0 +#define D_TI_VERSION 0 + + +/*------------------------------------------------------------------------------*/ +/* */ +/* DEFINITIONS FOR DSP <-> MCU COMMUNICATION. */ +/* ++++++++++++++++++++++++++++++++++++++++++ */ +/* */ +/*------------------------------------------------------------------------------*/ +// COMMUNICATION Interrupt definition +//------------------------------------ +#define ALL_16BIT 0xffffL +#define B_GSM_PAGE (1 << 0) +#define B_GSM_TASK (1 << 1) +#define B_MISC_PAGE (1 << 2) +#define B_MISC_TASK (1 << 3) + +#define B_GSM_PAGE_MASK (ALL_16BIT ^ B_GSM_PAGE) +#define B_GSM_TASK_MASK (ALL_16BIT ^ B_GSM_TASK) +#define B_MISC_PAGE_MASK (ALL_16BIT ^ B_MISC_PAGE) +#define B_MISC_TASK_MASK (ALL_16BIT ^ B_MISC_TASK) + +// Common definition +//---------------------------------- +// Index to *_DEMOD* arrays. +#define D_TOA 0 // Time Of Arrival. +#define D_PM 1 // Power Measurement. +#define D_ANGLE 2 // Angle (AFC correction) +#define D_SNR 3 // Signal / Noise Ratio. + +// Bit name/position definitions. +#define B_FIRE0 5 // Fire result bit 0. (00 -> NO ERROR) (01 -> ERROR CORRECTED) +#define B_FIRE1 6 // Fire result bit 1. (10 -> ERROR) (11 -> unused) +#define B_SCH_CRC 8 // CRC result for SB decoding. (1 for ERROR). +#define B_BLUD 15 // Uplink,Downlink data block Present. (1 for PRESENT). +#define B_AF 14 // Activity bit: 1 if data block is valid. +#define B_BFI 2 // Bad Frame Indicator +#define B_UFI 0 // UNRELIABLE FRAME Indicator +#define B_ECRC 9 // Enhanced full rate CRC bit +#define B_EMPTY_BLOCK 10 // for voice memo purpose, this bit is used to determine + +#if (DEBUG_DEDIC_TCH_BLOCK_STAT == 1) + #define FACCH_GOOD 10 + #define FACCH_BAD 11 +#endif + +#if (AMR == 1) + // Place of the RX type in the AMR block header + #define RX_TYPE_SHIFT 3 + #define RX_TYPE_MASK 0x0038 + + // Place of the vocoder type in the AMR block header + #define VOCODER_TYPE_SHIFT 0 + #define VOCODER_TYPE_MASK 0x0007 + + // List of the possible RX types in a_dd block + #define SPEECH_GOOD 0 + #define SPEECH_DEGRADED 1 + #define ONSET 2 + #define SPEECH_BAD 3 + #define SID_FIRST 4 + #define SID_UPDATE 5 + #define SID_BAD 6 + #define AMR_NO_DATA 7 + #define AMR_INHIBIT 8 + + // List of possible RX types in RATSCCH block + #define C_RATSCCH_GOOD 5 + + // List of the possible AMR channel rate + #define AMR_CHANNEL_4_75 0 + #define AMR_CHANNEL_5_15 1 + #define AMR_CHANNEL_5_9 2 + #define AMR_CHANNEL_6_7 3 + #define AMR_CHANNEL_7_4 4 + #define AMR_CHANNEL_7_95 5 + #define AMR_CHANNEL_10_2 6 + #define AMR_CHANNEL_12_2 7 + + // Types of RATSCCH blocks + #define C_RATSCCH_UNKNOWN 0 + #define C_RATSCCH_CMI_PHASE_REQ 1 + #define C_RATSCCH_AMR_CONFIG_REQ_MAIN 2 + #define C_RATSCCH_AMR_CONFIG_REQ_ALT 3 + #define C_RATSCCH_AMR_CONFIG_REQ_ALT_IGNORE 4 // Alternative AMR_CONFIG_REQ with updates coming in the next THRES_REQ block + #define C_RATSCCH_THRES_REQ 5 + + // These flags define a bitmap that indicates which AMR parameters are being modified by a RATSCCH + #define C_AMR_CHANGE_CMIP 0 + #define C_AMR_CHANGE_ACS 1 + #define C_AMR_CHANGE_ICM 2 + #define C_AMR_CHANGE_THR1 3 + #define C_AMR_CHANGE_THR2 4 + #define C_AMR_CHANGE_THR3 5 + #define C_AMR_CHANGE_HYST1 6 + #define C_AMR_CHANGE_HYST2 7 + #define C_AMR_CHANGE_HYST3 8 + + // CMIP default value + #define C_AMR_CMIP_DEFAULT 1 // According to ETSI specification 05.09, cmip is always 1 by default (new channel, handover...) + +#endif +// "d_ctrl_tch" bits positions for TCH configuration. +#define B_CHAN_MODE 0 +#define B_CHAN_TYPE 4 +#define B_RESET_SACCH 6 +#define B_VOCODER_ON 7 +#define B_SYNC_TCH_UL 8 +#if (AMR == 1) + #define B_SYNC_AMR 9 +#else +#define B_SYNC_TCH_DL 9 +#endif +#define B_STOP_TCH_UL 10 +#define B_STOP_TCH_DL 11 +#define B_TCH_LOOP 12 +#define B_SUBCHANNEL 15 + +// "d_ctrl_abb" bits positions for conditionnal loading of abb registers. +#define B_RAMP 0 +#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) + #define B_BULRAMPDEL 3 // Note: this name is changed + #define B_BULRAMPDEL2 2 // Note: this name is changed + #define B_BULRAMPDEL_BIS 9 + #define B_BULRAMPDEL2_BIS 10 +#endif +#define B_AFC 4 + +// "d_ctrl_system" bits positions. +#define B_TSQ 0 +#define B_BCCH_FREQ_IND 3 +#define B_TASK_ABORT 15 // Abort RF tasks for DSP. |