1 files changed, 416 insertions, 0 deletions
diff --git a/src/ericsson-rbs/er_ccu_if.c b/src/ericsson-rbs/er_ccu_if.c
new file mode 100644
index 00000000..98abbf7d
--- /dev/null
+++ b/src/ericsson-rbs/er_ccu_if.c
@@ -0,0 +1,416 @@
+/*
+ * (C) 2022 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
+ * All Rights Reserved
+ *
+ * Author: Philipp Maier
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <er_ccu_if.h>
+#include <er_ccu_descr.h>
+#include <string.h>
+#include <errno.h>
+
+#include <osmocom/abis/e1_input.h>
+#include <osmocom/abis/abis.h>
+#include <osmocom/trau/trau_sync.h>
+#include <osmocom/trau/trau_pcu_ericsson.h>
+#include <bts.h>
+#include <gprs_debug.h>
+#include <pcu_l1_if.h>
+
+#define E1_TS_BYTES 160
+#define DEBUG_BITS_MAX 1280
+#define DEBUG_BYTES_MAX 40
+
+#define LOGPCCU(ccu_descr, level, tag, fmt, args...) \
+	LOGP(DE1, level, "E1TS(%u:%u:%u) %s:" fmt, \
+	     ccu_descr->e1_conn_pars->e1_nr, ccu_descr->e1_conn_pars->e1_ts, \
+	     ccu_descr->e1_conn_pars->e1_ts_ss == E1_SUBSLOT_FULL ? 0 : ccu_descr->e1_conn_pars->e1_ts_ss, tag, \
+	     ## args)
+
+struct e1_ts_descr {
+	uint8_t usecount;
+	bool i460_ts_initialized;
+	struct osmo_i460_timeslot i460_ts;
+};
+
+struct e1_line_descr {
+	struct e1_ts_descr e1_ts[NUM_E1_TS - 1];
+};
+
+static struct e1_line_descr e1_lines[32];
+static void *tall_ccu_ctx = NULL;
+
+static const struct e1inp_line_ops dummy_e1_line_ops = {
+	.sign_link_up = NULL,
+	.sign_link_down = NULL,
+	.sign_link = NULL,
+};
+
+/* called by trau frame synchronizer: feed received MAC blocks into PCU */
+static void sync_frame_out_cb(void *user_data, const ubit_t *bits, unsigned int num_bits)
+{
+	struct er_ccu_descr *ccu_descr = user_data;
+
+	if (!bits || num_bits == 0)
+		return;
+
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "I.460-RX", "receiving %u TRAU frame bits from subslot (synchronized): %s...\n",
+		num_bits, osmo_ubit_dump(bits, num_bits > DEBUG_BITS_MAX ? DEBUG_BITS_MAX : num_bits));
+
+	ccu_descr->er_ccu_rx_cb(ccu_descr, bits, num_bits);
+}
+
+/* called by I.460 de-multiplexer: feed output of I.460 demux into TRAU frame sync */
+static void e1_i460_demux_bits_cb(struct osmo_i460_subchan *schan, void *user_data, const ubit_t *bits,
+				  unsigned int num_bits)
+{
+	struct er_ccu_descr *ccu_descr = user_data;
+
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "I.460-RX", "receiving %u TRAU frame bits from subslot: %s...\n", num_bits,
+		osmo_ubit_dump(bits, num_bits > DEBUG_BITS_MAX ? DEBUG_BITS_MAX : num_bits));
+
+	OSMO_ASSERT(ccu_descr->link.trau_sync_fi);
+	osmo_trau_sync_rx_ubits(ccu_descr->link.trau_sync_fi, bits, num_bits);
+
+}
+
+/* called by I.460 de-multiplexer: ensure that sync indications are sent when mux buffer runs empty */
+static void e1_i460_mux_empty_cb(struct osmo_i460_subchan *schan2, void *user_data)
+{
+	struct er_ccu_descr *ccu_descr = user_data;
+
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "I.460-TX", "demux buffer empty\n");
+	ccu_descr->er_ccu_empty_cb(ccu_descr);
+}
+
+/* handle outgoing E1 traffic */
+static void e1_send_ts_frame(struct e1inp_ts *ts)
+{
+	void *ctx = tall_ccu_ctx;
+	struct e1_ts_descr *ts_descr;
+	struct msgb *msg;
+	uint8_t *ptr;
+
+	/* The line number and ts number that arrives here should be clean. */
+	OSMO_ASSERT(ts->line->num < ARRAY_SIZE(e1_lines));
+
+	ts_descr = &e1_lines[ts->line->num].e1_ts[ts->num];
+
+	/* Do not send anything in case the E1 timeslot is not ready. */
+	if (ts_descr->usecount == 0)
+		return;
+
+	/* Get E1 frame from I.460 multiplexer */
+	msg = msgb_alloc_c(ctx, E1_TS_BYTES, "E1-TX-timeslot-bytes");
+	ptr = msgb_put(msg, E1_TS_BYTES);
+	osmo_i460_mux_out(&ts_descr->i460_ts, ptr, E1_TS_BYTES);
+
+	LOGPITS(ts, DE1, LOGL_DEBUG, "E1-TX: sending %u bytes: %s...\n",
+	     msgb_length(msg), osmo_hexdump_nospc(msgb_data(msg),
+						  msgb_length(msg) >
+						  DEBUG_BYTES_MAX ? DEBUG_BYTES_MAX : msgb_length(msg)));
+
+	/* Hand data over to the E1 stack */
+	msgb_enqueue(&ts->raw.tx_queue, msg);
+}
+
+/* Callback function to handle incoming E1 traffic */
+static void e1_recv_cb(struct e1inp_ts *ts, struct msgb *msg)
+{
+	struct e1_ts_descr *ts_descr;
+
+	if (msg->len != E1_TS_BYTES) {
+		LOGPITS(ts, DE1, LOGL_ERROR,
+		     "E1-RX: receiving bad, expected length is %u, actual length is %u!\n",
+		     E1_TS_BYTES, msg->len);
+		msgb_free(msg);
+		return;
+	}
+
+	LOGPITS(ts, DE1, LOGL_DEBUG, "E1-RX: receiving %u bytes: %s ...\n",
+		msg->len, osmo_hexdump_nospc(msg->data, msg->len));
+
+	/* Note: The line number and ts number that arrives here should be clean. */
+	OSMO_ASSERT(ts->line->num < ARRAY_SIZE(e1_lines));
+	ts_descr = &e1_lines[ts->line->num].e1_ts[ts->num];
+
+	/* Hand data over to the I640 demultiplexer. */
+	osmo_i460_demux_in(&ts_descr->i460_ts, msg->data, msg->len);
+
+	/* Trigger sending of pending E1 traffic */
+	e1_send_ts_frame(ts);
+
+	/* e1inp_rx_ts(), the caller of this callback does not free() msgb. */
+	msgb_free(msg);
+}
+
+static struct e1_ts_descr *ts_descr_from_ccu_descr(struct er_ccu_descr *ccu_descr)
+{
+	/* Make sure E1 line number is valid */
+	if (ccu_descr->e1_conn_pars->e1_nr >= ARRAY_SIZE(e1_lines)) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "Invalid E1 line number!\n");
+		return NULL;
+	}
+
+	/* Make sure E1 timeslot number is valid */
+	if (ccu_descr->e1_conn_pars->e1_ts < 1 || ccu_descr->e1_conn_pars->e1_ts > NUM_E1_TS - 1) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "Invalid E1 timeslot number!\n");
+		return NULL;
+	}
+
+	/* Timeslots are only initialized once and will stay open after that. */
+	return &e1_lines[ccu_descr->e1_conn_pars->e1_nr].e1_ts[ccu_descr->e1_conn_pars->e1_ts];
+}
+
+/* Configure an I.460 subslot and add it to the CCU descriptor */
+static int add_i460_subslot(void *ctx, struct er_ccu_descr *ccu_descr)
+{
+	struct e1_ts_descr *ts_descr;
+	enum osmo_tray_sync_pat_id sync_pattern;
+
+	if (ccu_descr->link.schan) {
+		/* NOTE: This is a serious error: subslots should be removed when l1if_close_trx() is called by the
+		 * PCU. This log line points towards a problem with the PDCH management inside the PCU! */
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "I.460 subslot is already configured -- will not touch it!\n");
+		return -EINVAL;
+	}
+
+	ts_descr = ts_descr_from_ccu_descr(ccu_descr);
+	if (!ts_descr)
+		return -EINVAL;
+	if (ts_descr->usecount == 0) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "E1 timeslot not ready!\n");
+		return -EINVAL;
+	}
+
+	/* Set up I.460 subchannel and connect it to the MUX on the E1 timeslot */
+	if (ccu_descr->e1_conn_pars->e1_ts_ss == E1_SUBSLOT_FULL) {
+		LOGPCCU(ccu_descr, LOGL_INFO, "SETUP", "using 64k subslots\n");
+		ccu_descr->link.scd.rate = OSMO_I460_RATE_64k;
+		ccu_descr->link.scd.demux.num_bits = E1_TS_BYTES * 8;
+		ccu_descr->link.scd.bit_offset = 0;
+		sync_pattern = OSMO_TRAU_SYNCP_64_ER_CCU;
+	} else {
+		LOGPCCU(ccu_descr, LOGL_INFO, "SETUP", "using 16k subslots\n");
+		if (ccu_descr->e1_conn_pars->e1_ts_ss > 3) {
+			LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "Invalid I.460 subslot number!\n");
+			return -EINVAL;
+		}
+		ccu_descr->link.scd.rate = OSMO_I460_RATE_16k;
+		ccu_descr->link.scd.demux.num_bits = E1_TS_BYTES / 4 * 8;
+		ccu_descr->link.scd.bit_offset = ccu_descr->e1_conn_pars->e1_ts_ss * 2;
+		sync_pattern = OSMO_TRAU_SYNCP_16_ER_CCU;
+	}
+
+	ccu_descr->link.scd.demux.out_cb_bits = e1_i460_demux_bits_cb;
+	ccu_descr->link.scd.demux.out_cb_bytes = NULL;
+	ccu_descr->link.scd.demux.user_data = ccu_descr;
+	ccu_descr->link.scd.mux.in_cb_queue_empty = e1_i460_mux_empty_cb;
+	ccu_descr->link.scd.mux.user_data = ccu_descr;
+
+	LOGPCCU(ccu_descr, LOGL_INFO, "SETUP", "adding I.460 subchannel: bit_offset=%u, num_bits=%zu\n",
+		ccu_descr->link.scd.bit_offset, ccu_descr->link.scd.demux.num_bits);
+	ccu_descr->link.schan = osmo_i460_subchan_add(ctx, &ts_descr->i460_ts, &ccu_descr->link.scd);
+	if (!ccu_descr->link.schan) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "adding I.460 subchannel: failed!\n");
+		return -EINVAL;
+	}
+
+	/* Configure TRAU synchronizer */
+	ccu_descr->link.trau_sync_fi = osmo_trau_sync_alloc(tall_ccu_ctx, "trau-sync", sync_frame_out_cb, sync_pattern, ccu_descr);
+	if (!ccu_descr->link.trau_sync_fi) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "adding I.460 TRAU frame sync: failed!\n");
+		return -EINVAL;
+	}
+
+	/* Ericsson uses a different synchronization pattern for MCS9 TRAU frames */
+	if (sync_pattern == OSMO_TRAU_SYNCP_64_ER_CCU)
+		osmo_trau_sync_set_secondary_pat(ccu_descr->link.trau_sync_fi, OSMO_TRAU_SYNCP_64_ER_CCU_MCS9, 1);
+
+	return 0;
+}
+
+/* Remove an I.460 subslot from the CCU descriptor */
+static void del_i460_subslot(struct er_ccu_descr *ccu_descr)
+{
+	if (ccu_descr->link.schan)
+		osmo_i460_subchan_del(ccu_descr->link.schan);
+	ccu_descr->link.schan = NULL;
+	if (ccu_descr->link.trau_sync_fi)
+		osmo_fsm_inst_term(ccu_descr->link.trau_sync_fi, OSMO_FSM_TERM_REGULAR, NULL);
+	ccu_descr->link.trau_sync_fi = NULL;
+
+	memset(&ccu_descr->link.scd, 0, sizeof(ccu_descr->link.scd));
+}
+
+/* Configure an E1 timeslot according to the description in the ccu_descr */
+static int open_e1_timeslot(struct er_ccu_descr *ccu_descr)
+{
+	struct e1inp_line *e1_line;
+	struct e1_ts_descr *ts_descr;
+	int rc;
+
+	/* Find timeslot descriptor and check if the timeslot is already open. */
+	ts_descr = ts_descr_from_ccu_descr(ccu_descr);
+	if (!ts_descr)
+		return -EINVAL;
+	if (ts_descr->usecount > 0) {
+		LOGPCCU(ccu_descr, LOGL_DEBUG, "SETUP", "E1 timeslot already open -- using it as it is!\n");
+		ts_descr->usecount++;
+		return 0;
+	}
+
+	/* Find and set up E1 line */
+	e1_line = e1inp_line_find(ccu_descr->e1_conn_pars->e1_nr);
+	if (!e1_line) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "no such E1 line!\n");
+		return -EINVAL;
+	}
+	e1inp_line_bind_ops(e1_line, &dummy_e1_line_ops);
+
+	/* Set up E1 timeslot */
+	rc = e1inp_ts_config_raw(&e1_line->ts[ccu_descr->e1_conn_pars->e1_ts - 1], e1_line, e1_recv_cb);
+	if (rc < 0) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "configuration of timeslot failed!\n");
+		return -EINVAL;
+	}
+	rc = e1inp_line_update(e1_line);
+	if (rc < 0) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "line update failed!\n");
+		return -EINVAL;
+	}
+
+	/* Make sure the i460 mux is ready */
+	if (!ts_descr->i460_ts_initialized) {
+		osmo_i460_ts_init(&ts_descr->i460_ts);
+		ts_descr->i460_ts_initialized = true;
+	}
+
+	ts_descr->usecount++;
+	OSMO_ASSERT(ts_descr->usecount == 1);
+
+	return 0;
+}
+
+/* Configure an E1 timeslot according to the description in the ccu_descr */
+static int close_e1_timeslot(struct er_ccu_descr *ccu_descr)
+{
+	struct e1inp_line *e1_line;
+	struct e1_ts_descr *ts_descr;
+	int rc;
+
+	/* Find timeslot descriptor and check if the timeslot is still used by another subslot. */
+	ts_descr = ts_descr_from_ccu_descr(ccu_descr);
+	if (!ts_descr)
+		return -EINVAL;
+	if (ts_descr->usecount > 1) {
+		LOGPCCU(ccu_descr, LOGL_DEBUG, "SETUP",
+			"E1 timeslot still in used by another subslot, leaving it open!\n");
+		ts_descr->usecount--;
+		return 0;
+	} else if (ts_descr->usecount == 0) {
+		/* This should not be as it means we close the timeslot too often. */
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "E1 timeslot already closed, leaving it as it is...\n");
+		return -EINVAL;
+	}
+
+	/* Find E1 line */
+	e1_line = e1inp_line_find(ccu_descr->e1_conn_pars->e1_nr);
+	if (!e1_line) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "no such E1 line!\n");
+		return -EINVAL;
+	}
+
+	/* Release E1 timeslot */
+	rc = e1inp_ts_config_none(&e1_line->ts[ccu_descr->e1_conn_pars->e1_ts - 1], e1_line);
+	if (rc < 0) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "failed to disable E1 timeslot!\n");
+		return -EINVAL;
+	}
+	rc = e1inp_line_update(e1_line);
+	if (rc < 0) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "failed to update E1 line!\n");
+		return -EINVAL;
+	}
+
+	ts_descr->usecount--;
+	OSMO_ASSERT(ts_descr->usecount == 0);
+
+	return 0;
+}
+
+int er_ccu_if_open(struct er_ccu_descr *ccu_descr)
+{
+	if (ccu_descr->link.ccu_connected) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP",
+			"cannot connect CCU since it is already connected -- ignored!\n");
+		return 0;
+	}
+
+	if (open_e1_timeslot(ccu_descr) < 0)
+		return -EINVAL;
+
+	if (add_i460_subslot(tall_ccu_ctx, ccu_descr) < 0)
+		return -EINVAL;
+
+	ccu_descr->link.ccu_connected = true;
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "SETUP", "CCU connected.\n");
+	return 0;
+}
+
+void er_ccu_if_close(struct er_ccu_descr *ccu_descr)
+{
+	if (!ccu_descr->link.ccu_connected) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP",
+			"cannot disconnect CCU since it is already disconnected -- ignored!\n");
+		return;
+	}
+
+	del_i460_subslot(ccu_descr);
+	close_e1_timeslot(ccu_descr);
+
+	ccu_descr->link.ccu_connected = false;
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "SETUP", "CCU disconnected.\n");
+}
+
+void er_ccu_if_tx(struct er_ccu_descr *ccu_descr, const ubit_t *bits, unsigned int num_bits)
+{
+	struct msgb *msg;
+	uint8_t *ptr;
+
+	if (!ccu_descr->link.ccu_connected) {
+		LOGPCCU(ccu_descr, LOGL_ERROR, "SETUP", "cannot TX block, CCU is disconnected -- ignored!\n");
+		return;
+	}
+
+	msg = msgb_alloc_c(tall_ccu_ctx, num_bits, "E1-I.460-PCU-IND-frame");
+	ptr = msgb_put(msg, num_bits);
+	memcpy(ptr, bits, num_bits);
+	LOGPCCU(ccu_descr, LOGL_DEBUG, "I.460-TX", "sending %u bits: %s...\n", msgb_length(msg),
+		osmo_ubit_dump(msgb_data(msg), msgb_length(msg) > DEBUG_BITS_MAX ? DEBUG_BITS_MAX : msgb_length(msg)));
+	osmo_i460_mux_enqueue(ccu_descr->link.schan, msg);
+}
+
+void er_ccu_if_init(void *ctx)
+{
+	libosmo_abis_init(ctx);
+	e1inp_vty_init();
+
+	tall_ccu_ctx = talloc_new(ctx);
+	memset(e1_lines, 0, sizeof(e1_lines));
+}