diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/handover_cfg.vty | 101 |
1 files changed, 57 insertions, 44 deletions
diff --git a/tests/handover_cfg.vty b/tests/handover_cfg.vty index e2e4b28cd..a9d3f520b 100644 --- a/tests/handover_cfg.vty +++ b/tests/handover_cfg.vty @@ -38,7 +38,7 @@ OsmoBSC(config-net-bts)# do show network ... OsmoBSC(config-net-bts)# ### Add arbitrary handover config item for bts 1: -OsmoBSC(config-net-bts)# handover power budget interval 23 +OsmoBSC(config-net-bts)# handover1 power budget interval 23 OsmoBSC(config-net-bts)# exit OsmoBSC(config-net)# ### HO is 'on' globally, bts 0 disables it, bts 1 tweaks a param: OsmoBSC(config-net)# show running-config @@ -53,7 +53,7 @@ network ... !handover bts 1 ... !handover - handover power budget interval 23 + handover1 power budget interval 23 ... !handover OsmoBSC(config-net)# ### Set global default to 'off', now bts 1 also uses the global default of 'off': @@ -74,7 +74,7 @@ network ... !handover bts 1 ... !handover - handover power budget interval 23 + handover1 power budget interval 23 ... !handover OsmoBSC(config-net)# ### Remove the global setting, i.e. use the factory default net level, with same effect: @@ -96,7 +96,7 @@ network ... !handover bts 1 ... !handover - handover power budget interval 23 + handover1 power budget interval 23 ... !handover OsmoBSC(config-net)# ### Re-enable net-level handover, but bts 0 remains disabled explicitly @@ -117,7 +117,7 @@ network ... !handover bts 1 ... !handover - handover power budget interval 23 + handover1 power budget interval 23 ... !handover OsmoBSC(config-net)# ### Remove explicit setting of bts 0 to also use the global setting: @@ -140,7 +140,7 @@ network ... !handover bts 1 ... !handover - handover power budget interval 23 + handover1 power budget interval 23 ... !handover OsmoBSC(config-net-bts)# ### Verify that 'min rxlev' value range stops at -50 @@ -165,12 +165,12 @@ OsmoBSC(config-net)# list ... handover (0|1|default) handover algorithm (1|2|default) - handover window rxlev averaging (<1-10>|default) - handover window rxqual averaging (<1-10>|default) - handover window rxlev neighbor averaging (<1-10>|default) - handover power budget interval (<1-99>|default) - handover power budget hysteresis (<0-999>|default) - handover maximum distance (<0-9999>|default) + handover1 window rxlev averaging (<1-10>|default) + handover1 window rxqual averaging (<1-10>|default) + handover1 window rxlev neighbor averaging (<1-10>|default) + handover1 power budget interval (<1-99>|default) + handover1 power budget hysteresis (<0-999>|default) + handover1 maximum distance (<0-9999>|default) handover2 window rxlev averaging (<1-10>|default) handover2 window rxqual averaging (<1-10>|default) handover2 window rxlev neighbor averaging (<1-10>|default) @@ -190,12 +190,16 @@ OsmoBSC(config-net)# list handover2 penalty-time failed-ho (<0-99999>|default) handover2 penalty-time failed-assignment (<0-99999>|default) handover2 retries (<0-9>|default) +... !handover2 handover2 congestion-check (disabled|<1-999>|now) ... OsmoBSC(config-net)# handover? handover Handover general config +OsmoBSC(config-net)# handover1? + handover1 Handover options for handover decision algorithm 1 + OsmoBSC(config-net)# handover2? handover2 Handover options for handover decision algorithm 2 @@ -204,9 +208,12 @@ OsmoBSC(config-net)# handover ? 1 Enable in-call handover default Enable/disable handover: Use default (0), remove explicit setting on this node algorithm Choose algorithm for handover decision - window Measurement averaging settings - power Neighbor cell power triggering - maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO +... + +OsmoBSC(config-net)# handover1 ? + window Measurement averaging settings + power Neighbor cell power triggering + maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO OsmoBSC(config-net)# handover2 ? window Measurement averaging settings @@ -227,51 +234,51 @@ OsmoBSC(config-net)# handover algorithm ? 2 Algorithm 2: trigger handover on RxLev/RxQual, and also to balance the load across several cells. Consider available codecs. Prevent repeated handover by penalty timers. default Use default (1), remove explicit setting on this node -OsmoBSC(config-net)# handover window ? +OsmoBSC(config-net)# handover1 window ? rxlev Received-Level averaging rxqual Received-Quality averaging -OsmoBSC(config-net)# handover window rxlev ? +OsmoBSC(config-net)# handover1 window rxlev ? averaging How many RxLev measurements are used for averaging neighbor How many Neighbor RxLev measurements are used for averaging -OsmoBSC(config-net)# handover window rxlev averaging ? +OsmoBSC(config-net)# handover1 window rxlev averaging ? <1-10> RxLev averaging: Number of values to average over default Use default (10), remove explicit setting on this node -OsmoBSC(config-net)# handover window rxlev neighbor ? +OsmoBSC(config-net)# handover1 window rxlev neighbor ? averaging How many Neighbor RxLev measurements are used for averaging -OsmoBSC(config-net)# handover window rxlev neighbor averaging ? +OsmoBSC(config-net)# handover1 window rxlev neighbor averaging ? <1-10> Neighbor RxLev averaging: Number of values to average over default Use default (10), remove explicit setting on this node -OsmoBSC(config-net)# handover window rxqual ? +OsmoBSC(config-net)# handover1 window rxqual ? averaging How many RxQual measurements are used for averaging -OsmoBSC(config-net)# handover window rxqual averaging ? +OsmoBSC(config-net)# handover1 window rxqual averaging ? <1-10> RxQual averaging: Number of values to average over default Use default (1), remove explicit setting on this node -OsmoBSC(config-net)# handover power ? +OsmoBSC(config-net)# handover1 power ? budget Neighbor cell power triggering -OsmoBSC(config-net)# handover power budget ? +OsmoBSC(config-net)# handover1 power budget ? interval How often to check for a better cell (SACCH frames) hysteresis How many dBm stronger must a neighbor be to become a HO candidate -OsmoBSC(config-net)# handover power budget interval ? +OsmoBSC(config-net)# handover1 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node -OsmoBSC(config-net)# handover power budget hysteresis ? +OsmoBSC(config-net)# handover1 power budget hysteresis ? <0-999> Neighbor's strength difference in dBm default Use default (3), remove explicit setting on this node -OsmoBSC(config-net)# handover maximum ? +OsmoBSC(config-net)# handover1 maximum ? distance Maximum Timing-Advance value (i.e. MS distance) before triggering HO -OsmoBSC(config-net)# handover maximum distance ? +OsmoBSC(config-net)# handover1 maximum distance ? <0-9999> Maximum Timing-Advance value (i.e. MS distance) before triggering HO default Use default (9999), remove explicit setting on this node @@ -409,6 +416,9 @@ OsmoBSC(config-net)# bts 0 OsmoBSC(config-net-bts)# handover? handover Handover general config +OsmoBSC(config-net-bts)# handover1? + handover1 Handover options for handover decision algorithm 1 + OsmoBSC(config-net-bts)# handover2? handover2 Handover options for handover decision algorithm 2 @@ -417,9 +427,12 @@ OsmoBSC(config-net-bts)# handover ? 1 Enable in-call handover default Enable/disable handover: Use default (0), remove explicit setting on this node algorithm Choose algorithm for handover decision - window Measurement averaging settings - power Neighbor cell power triggering - maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO +... + +OsmoBSC(config-net-bts)# handover1 ? + window Measurement averaging settings + power Neighbor cell power triggering + maximum Maximum Timing-Advance value (i.e. MS distance) before triggering HO OsmoBSC(config-net-bts)# handover2 ? window Measurement averaging settings @@ -439,51 +452,51 @@ OsmoBSC(config-net-bts)# handover algorithm ? 2 Algorithm 2: trigger handover on RxLev/RxQual, and also to balance the load across several cells. Consider available codecs. Prevent repeated handover by penalty timers. default Use default (1), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover window ? +OsmoBSC(config-net-bts)# handover1 window ? rxlev Received-Level averaging rxqual Received-Quality averaging -OsmoBSC(config-net-bts)# handover window rxlev ? +OsmoBSC(config-net-bts)# handover1 window rxlev ? averaging How many RxLev measurements are used for averaging neighbor How many Neighbor RxLev measurements are used for averaging -OsmoBSC(config-net-bts)# handover window rxlev averaging ? +OsmoBSC(config-net-bts)# handover1 window rxlev averaging ? <1-10> RxLev averaging: Number of values to average over default Use default (10), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover window rxlev neighbor ? +OsmoBSC(config-net-bts)# handover1 window rxlev neighbor ? averaging How many Neighbor RxLev measurements are used for averaging -OsmoBSC(config-net-bts)# handover window rxlev neighbor averaging ? +OsmoBSC(config-net-bts)# handover1 window rxlev neighbor averaging ? <1-10> Neighbor RxLev averaging: Number of values to average over default Use default (10), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover window rxqual ? +OsmoBSC(config-net-bts)# handover1 window rxqual ? averaging How many RxQual measurements are used for averaging -OsmoBSC(config-net-bts)# handover window rxqual averaging ? +OsmoBSC(config-net-bts)# handover1 window rxqual averaging ? <1-10> RxQual averaging: Number of values to average over default Use default (1), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover power ? +OsmoBSC(config-net-bts)# handover1 power ? budget Neighbor cell power triggering -OsmoBSC(config-net-bts)# handover power budget ? +OsmoBSC(config-net-bts)# handover1 power budget ? interval How often to check for a better cell (SACCH frames) hysteresis How many dBm stronger must a neighbor be to become a HO candidate -OsmoBSC(config-net-bts)# handover power budget interval ? +OsmoBSC(config-net-bts)# handover1 power budget interval ? <1-99> Check for stronger neighbor every N number of SACCH frames default Use default (6), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover power budget hysteresis ? +OsmoBSC(config-net-bts)# handover1 power budget hysteresis ? <0-999> Neighbor's strength difference in dBm default Use default (3), remove explicit setting on this node -OsmoBSC(config-net-bts)# handover maximum ? +OsmoBSC(config-net-bts)# handover1 maximum ? distance Maximum Timing-Advance value (i.e. MS distance) before triggering HO -OsmoBSC(config-net-bts)# handover maximum distance ? +OsmoBSC(config-net-bts)# handover1 maximum distance ? <0-9999> Maximum Timing-Advance value (i.e. MS distance) before triggering HO default Use default (9999), remove explicit setting on this node |