diff options
35 files changed, 2223 insertions, 311 deletions
@@ -37,6 +37,7 @@ libosmocore-*.tar.* Doxyfile.core Doxyfile.ctrl Doxyfile.gsm +Doxyfile.isdn Doxyfile.vty Doxyfile.codec Doxyfile.coding @@ -80,6 +81,7 @@ doc/vty/latex doc/vty/html doc/vty/doxygen_sqlite3.db doc/gsm +doc/isdn doc/gb doc/html.tar doc/*.tag diff --git a/Doxyfile.codec.in b/Doxyfile.codec.in index 88f0d27a..40be69fe 100644 --- a/Doxyfile.codec.in +++ b/Doxyfile.codec.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmovty.tag=../../vty/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.coding.in b/Doxyfile.coding.in index d0e99425..50355de4 100644 --- a/Doxyfile.coding.in +++ b/Doxyfile.coding.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.core.in b/Doxyfile.core.in index 29507e04..fb4ceffb 100644 --- a/Doxyfile.core.in +++ b/Doxyfile.core.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmogsm.tag=../../gsm/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.ctrl.in b/Doxyfile.ctrl.in index 5612a741..6d101dfc 100644 --- a/Doxyfile.ctrl.in +++ b/Doxyfile.ctrl.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.gb.in b/Doxyfile.gb.in index b3b2128d..da8e7705 100644 --- a/Doxyfile.gb.in +++ b/Doxyfile.gb.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.gsm.in b/Doxyfile.gsm.in index fd893907..c04a1f6a 100644 --- a/Doxyfile.gsm.in +++ b/Doxyfile.gsm.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmoisdn.tag=../../isdn/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Doxyfile.isdn.in b/Doxyfile.isdn.in new file mode 100644 index 00000000..9476ab2a --- /dev/null +++ b/Doxyfile.isdn.in @@ -0,0 +1,1716 @@ +# Doxyfile 1.7.4 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = libosmoisdn + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = "Osmocom ISDN library" + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/isdn + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit command for a brief description.) + +QT_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = @srcdir@/include/osmocom/isdn @srcdir@/src/isdn + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +# IMAGE_PATH = images/ + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = NO + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 1 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = YES + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the +# mathjax.org site, so you can quickly see the result without installing +# MathJax, but it is strongly recommended to install a local copy of MathJax +# before deployment. + +MATHJAX_RELPATH = http://www.mathjax.org/mathjax + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmovty.tag=../../vty/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = doc/libosmoisdn.tag + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will write a font called Helvetica to the output +# directory and reference it in all dot files that doxygen generates. +# When you want a differently looking font you can specify the font name +# using DOT_FONTNAME. You need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = /usr/bin/dot + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/Doxyfile.vty.in b/Doxyfile.vty.in index 9f56fd7f..8d9fc69e 100644 --- a/Doxyfile.vty.in +++ b/Doxyfile.vty.in @@ -1485,7 +1485,7 @@ SKIP_FUNCTION_MACROS = YES # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. -TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html +TAGFILES = doc/libosmocore.tag=../../core/html doc/libosmogsm.tag=../../gsm/html doc/libosmoisdn.tag=../../isdn/html doc/libosmocodec.tag=../../codec/html doc/libosmocoding.tag=../../coding/html doc/libosmoctrl.tag=../../ctrl/html doc/libosmogb.tag=../../gb/html # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. diff --git a/Makefile.am b/Makefile.am index 48d6e9bb..e57b0221 100644 --- a/Makefile.am +++ b/Makefile.am @@ -12,7 +12,7 @@ SUBDIRS = \ pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc \ libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc \ - libosmousb.pc + libosmousb.pc libosmoisdn.pc aclocaldir = $(datadir)/aclocal dist_aclocal_DATA = m4/osmo_ac_code_coverage.m4 \ @@ -47,6 +47,7 @@ EXTRA_DIST = \ HTML = \ $(top_builddir)/doc/core/html/index.html \ $(top_builddir)/doc/gsm/html/index.html \ + $(top_builddir)/doc/isdn/html/index.html \ $(top_builddir)/doc/vty/html/index.html \ $(top_builddir)/doc/codec/html/index.html \ $(top_builddir)/doc/coding/html/index.html \ @@ -100,6 +101,14 @@ $(top_builddir)/doc/libosmogsm.tag.prep: $(top_builddir)/Doxyfile.gsm \ -$(DOXYGEN) $(top_builddir)/Doxyfile.gsm touch "$@" +$(top_builddir)/doc/libosmoisdn.tag.prep: $(top_builddir)/Doxyfile.isdn \ + $(top_srcdir)/include/osmocom/isdn/*.h \ + $(top_srcdir)/src/isdn/*.c + rm -rf $(top_builddir)/doc/isdn; mkdir -p $(top_builddir)/doc/isdn + rm -rf $(top_builddir)/doc/libosmoisdn.map + -$(DOXYGEN) $(top_builddir)/Doxyfile.isdn + touch "$@" + # Don't delete the entire doc/vty, it contains example.xml and vtydoc.xsd (OS#3986) $(top_builddir)/doc/libosmovty.tag.prep: $(top_builddir)/Doxyfile.vty \ $(top_srcdir)/include/osmocom/vty/*.h \ @@ -155,6 +164,7 @@ $(top_builddir)/doc/libosmogb.tag.prep: $(top_builddir)/Doxyfile.gb \ $(top_builddir)/doc/core/html/index.html: $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ @@ -165,6 +175,7 @@ $(top_builddir)/doc/core/html/index.html: $(top_builddir)/doc/libosmocore.tag.pr $(top_builddir)/doc/gsm/html/index.html: $(top_builddir)/doc/libosmogsm.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ @@ -173,10 +184,22 @@ $(top_builddir)/doc/gsm/html/index.html: $(top_builddir)/doc/libosmogsm.tag.prep rm -rf $(top_builddir)/doc/gsm; mkdir -p $(top_builddir)/doc/gsm $(DOXYGEN) Doxyfile.gsm +$(top_builddir)/doc/isdn/html/index.html: $(top_builddir)/doc/libosmoisdn.tag.prep \ + $(top_builddir)/doc/libosmocore.tag.prep \ + $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmovty.tag.prep \ + $(top_builddir)/doc/libosmocodec.tag.prep \ + $(top_builddir)/doc/libosmocoding.tag.prep \ + $(top_builddir)/doc/libosmoctrl.tag.prep \ + $(top_builddir)/doc/libosmogb.tag.prep + rm -rf $(top_builddir)/doc/isdn; mkdir -p $(top_builddir)/doc/isdn + $(DOXYGEN) Doxyfile.isdn + # Don't delete the entire doc/vty, it contains example.xml and vtydoc.xsd (OS#3986) $(top_builddir)/doc/vty/html/index.html: $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ $(top_builddir)/doc/libosmoctrl.tag.prep \ @@ -187,6 +210,7 @@ $(top_builddir)/doc/vty/html/index.html: $(top_builddir)/doc/libosmovty.tag.prep $(top_builddir)/doc/codec/html/index.html: $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ $(top_builddir)/doc/libosmoctrl.tag.prep \ @@ -197,6 +221,7 @@ $(top_builddir)/doc/codec/html/index.html: $(top_builddir)/doc/libosmocodec.tag. $(top_builddir)/doc/coding/html/index.html: $(top_builddir)/doc/libosmocoding.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmoctrl.tag.prep \ @@ -207,6 +232,7 @@ $(top_builddir)/doc/coding/html/index.html: $(top_builddir)/doc/libosmocoding.ta $(top_builddir)/doc/ctrl/html/index.html: $(top_builddir)/doc/libosmoctrl.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ @@ -217,6 +243,7 @@ $(top_builddir)/doc/ctrl/html/index.html: $(top_builddir)/doc/libosmoctrl.tag.pr $(top_builddir)/doc/gb/html/index.html: $(top_builddir)/doc/libosmogb.tag.prep \ $(top_builddir)/doc/libosmocore.tag.prep \ $(top_builddir)/doc/libosmogsm.tag.prep \ + $(top_builddir)/doc/libosmoisdn.tag.prep \ $(top_builddir)/doc/libosmovty.tag.prep \ $(top_builddir)/doc/libosmocodec.tag.prep \ $(top_builddir)/doc/libosmocoding.tag.prep \ @@ -229,9 +256,9 @@ install-data-hook: cd $(DESTDIR)$(htmldir) && tar xf html.tar && rm -f html.tar uninstall-hook: - cd $(DESTDIR)$(htmldir) && rm -rf {core,gsm,vty,codec,coding,ctrl,gb} + cd $(DESTDIR)$(htmldir) && rm -rf {core,gsm,isdn,vty,codec,coding,ctrl,gb} -DX_CLEAN = doc/{core,gsm,vty,codec,coding,ctrl,gb}/html/search/* doc/{core,gsm,vty,codec,coding,ctrl,gb}/{html,latex}/* doc/html.tar doc/{core,gsm,vty,codec,coding,ctrl,gb}/doxygen_sqlite3.db doc/*.tag doc/*.tag.prep +DX_CLEAN = doc/{core,gsm,isdn,vty,codec,coding,ctrl,gb}/html/search/* doc/{core,gsm,isdn,vty,codec,coding,ctrl,gb}/{html,latex}/* doc/html.tar doc/{core,gsm,isdn,vty,codec,coding,ctrl,gb}/doxygen_sqlite3.db doc/*.tag doc/*.tag.prep endif MOSTLYCLEANFILES = $(DX_CLEAN) diff --git a/configure.ac b/configure.ac index 9c9681d8..1a87ec19 100644 --- a/configure.ac +++ b/configure.ac @@ -53,12 +53,14 @@ case $host in *) LTLDFLAGS_OSMOGB='-Wl,--version-script=$(srcdir)/libosmogb.map' LTLDFLAGS_OSMOGSM='-Wl,--version-script=$(srcdir)/libosmogsm.map' + LTLDFLAGS_OSMOISDN='-Wl,--version-script=$(srcdir)/libosmoisdn.map' LTLDFLAGS_OSMOCODING='-Wl,--version-script=$(srcdir)/libosmocoding.map' LTLDFLAGS_OSMOCTRL='-Wl,--version-script=$(srcdir)/libosmoctrl.map' ;; esac AC_SUBST(LTLDFLAGS_OSMOGB) AC_SUBST(LTLDFLAGS_OSMOGSM) +AC_SUBST(LTLDFLAGS_OSMOISDN) AC_SUBST(LTLDFLAGS_OSMOCODING) AC_SUBST(LTLDFLAGS_OSMOCTRL) @@ -580,6 +582,7 @@ AC_OUTPUT( libosmocoding.pc libosmovty.pc libosmogsm.pc + libosmoisdn.pc libosmogb.pc libosmoctrl.pc libosmosim.pc @@ -595,6 +598,7 @@ AC_OUTPUT( include/osmocom/gprs/protocol/Makefile include/osmocom/gsm/Makefile include/osmocom/gsm/protocol/Makefile + include/osmocom/isdn/Makefile include/osmocom/sim/Makefile include/osmocom/usb/Makefile include/osmocom/vty/Makefile @@ -606,6 +610,7 @@ AC_OUTPUT( src/sim/Makefile src/usb/Makefile src/gsm/Makefile + src/isdn/Makefile src/gb/Makefile src/ctrl/Makefile src/pseudotalloc/Makefile @@ -616,6 +621,7 @@ AC_OUTPUT( utils/osmo-stat-dummy/Makefile Doxyfile.core Doxyfile.gsm + Doxyfile.isdn Doxyfile.vty Doxyfile.codec Doxyfile.coding diff --git a/contrib/libosmocore.spec.in b/contrib/libosmocore.spec.in index 208f42da..14e8a7e9 100644 --- a/contrib/libosmocore.spec.in +++ b/contrib/libosmocore.spec.in @@ -211,6 +211,8 @@ License: GPL-2.0-or-later AND AGPL-3.0-or-later Group: Development/Libraries/C and C++ Requires: libosmocore-devel = %version Requires: libosmogsm18 = %version +Requires: libosmoisdn-devel = %version +Requires: libosmoisdn0 = %version %description -n libosmogsm-devel The libosmogsm library in particular is a collection of common code @@ -222,6 +224,34 @@ protocol definitions for a series of protocols. This subpackage contains libraries and header files for developing applications that want to make use of libosmogsm. +%package -n libosmoisdn0 +Summary: Osmocom ISDN utility library +License: GPL-2.0-or-later +Group: System/Libraries + +%description -n libosmoisdn0 +libosmocore is a package with various utility functions that were +originally developed as part of the OpenBSC project. + +The libosmoisdn library in particular is a collection of common code used in +various ISDN related sub-projects inside the Osmocom family of projects. It +includes an I.460 sub-channel multiplex and a generic LAPD core. + +%package -n libosmoisdn-devel +Summary: Development files for the Osmocom ISDN utility library +License: GPL-2.0-or-later +Group: Development/Libraries/C and C++ +Requires: libosmocore-devel = %version +Requires: libosmoisdn0 = %version + +%description -n libosmoisdn-devel +The libosmoisdn library in particular is a collection of common code used in +various ISDN related sub-projects inside the Osmocom family of projects. It +includes an I.460 sub-channel multiplex and a generic LAPD core. + +This subpackage contains libraries and header files for developing +applications that want to make use of libosmogsm. + %package -n libosmosim2 Summary: Osmocom SIM card related utility library License: GPL-2.0-or-later @@ -332,6 +362,8 @@ make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +) %postun -n libosmogb14 -p /sbin/ldconfig %post -n libosmogsm18 -p /sbin/ldconfig %postun -n libosmogsm18 -p /sbin/ldconfig +%post -n libosmoisdn0 -p /sbin/ldconfig +%postun -n libosmoisdn0 -p /sbin/ldconfig %post -n libosmosim2 -p /sbin/ldconfig %postun -n libosmosim2 -p /sbin/ldconfig %post -n libosmovty9 -p /sbin/ldconfig @@ -418,6 +450,18 @@ make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +) %_libdir/libosmogsm.so %_libdir/pkgconfig/libosmogsm.pc +%files -n libosmoisdn0 +%defattr(-,root,root) +%_libdir/libosmoisdn.so.0* + +%files -n libosmoisdn-devel +%defattr(-,root,root) +%dir %_includedir/%name +%dir %_includedir/%name/osmocom +%_includedir/%name/osmocom/isdn/ +%_libdir/libosmoisdn.so +%_libdir/pkgconfig/libosmoisdn.pc + %files -n libosmosim2 %defattr(-,root,root) %_libdir/libosmosim.so.2* diff --git a/debian/control b/debian/control index ec231336..2b8504a7 100644 --- a/debian/control +++ b/debian/control @@ -34,6 +34,7 @@ Depends: libosmocodec0 (= ${binary:Version}), libosmocore19 (= ${binary:Version}), libosmogb14 (= ${binary:Version}), libosmogsm18 (= ${binary:Version}), + libosmoisdn0 (= ${binary:Version}), libosmovty9 (= ${binary:Version}), libosmoctrl0 (= ${binary:Version}), libosmosim2 (= ${binary:Version}), @@ -141,6 +142,7 @@ Depends: ${misc:Depends}, libosmocodec-doc, libosmocoding-doc, libosmogsm-doc, + libosmoisdn-doc, libosmovty-doc Description: Documentation for the Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library @@ -218,6 +220,39 @@ Description: Documentation for the Osmo GSM utility library . This package contains the documentation for the libosmogsm library. +Package: libosmoisdn0 +Section: libs +Architecture: any +Multi-Arch: same +Depends: ${shlibs:Depends}, + ${misc:Depends} +Pre-Depends: ${misc:Pre-Depends} +Description: Osmo ISDN utility library + This is part of the libosmocore "meta"-library. The libosmocore library + contains various utility functions that were originally developed as part of + the OpenBSC project, but which are of a more generic nature and thus useful to + (at least) other programs that are developed in the sphere of Free Software / + Open Source mobile communication. + . + The libosmoisdn library in particular is a collection of common code used in + various ISDN related sub-projects inside the Osmocom family of projects. It + includes an I.460 sub-channel multiplex and a generic LAPD core. + +Package: libosmoisdn-doc +Architecture: all +Section: doc +Depends: ${misc:Depends}, + libosmoisdn0, + libjs-jquery +Description: Documentation for the Osmo ISDN utility library + This is part of the libosmocore "meta"-library. The libosmocore library + contains various utility functions that were originally developed as part of + the OpenBSC project, but which are of a more generic nature and thus useful to + (at least) other programs that are developed in the sphere of Free Software / + Open Source mobile communication. + . + This package contains the documentation for the libosmoisdnm library. + Package: libosmovty9 Section: libs Architecture: any diff --git a/debian/copyright b/debian/copyright index 31a2946d..9281f03d 100644 --- a/debian/copyright +++ b/debian/copyright @@ -36,7 +36,7 @@ Copyright: 2011 Harald Welte <laforge@gnumonks.org> License: GPL-2+ Files: src/gsm/gsm48_ie.c - src/gsm/lapd_core.c + src/isdn/lapd_core.c src/gsm/lapdm.c Copyright: 2008,2010-2011 Harald Welte <laforge@gnumonks.org> 2009-2011 Andreas Eversberg <jolly@eversberg.eu> diff --git a/debian/libosmocore.dirs b/debian/libosmocore.dirs index 94090a39..9c10e3aa 100644 --- a/debian/libosmocore.dirs +++ b/debian/libosmocore.dirs @@ -5,4 +5,5 @@ usr/include/osmocom/codec usr/include/osmocom/core usr/include/osmocom/crypt usr/include/osmocom/gsm +usr/include/osmocom/isdn usr/include/osmocom/vty diff --git a/debian/libosmoisdn-doc.doc-base b/debian/libosmoisdn-doc.doc-base new file mode 100644 index 00000000..bca6e1d0 --- /dev/null +++ b/debian/libosmoisdn-doc.doc-base @@ -0,0 +1,7 @@ +Document: libosmoisdn-doc +Title: Documentation for the libosmoisdn library +Section: Programming + +Format: HTML +Index: /usr/share/doc/libosmocore/isdn/html/index.html +Files: /usr/share/doc/libosmocore/isdn/html/*.html diff --git a/debian/libosmoisdn-doc.install b/debian/libosmoisdn-doc.install new file mode 100644 index 00000000..9c985503 --- /dev/null +++ b/debian/libosmoisdn-doc.install @@ -0,0 +1 @@ +usr/share/doc/libosmocore/isdn/ diff --git a/debian/libosmoisdn0.install b/debian/libosmoisdn0.install new file mode 100644 index 00000000..691a3e0f --- /dev/null +++ b/debian/libosmoisdn0.install @@ -0,0 +1 @@ +usr/lib/*/libosmoisdn*.so.* diff --git a/debian/rules b/debian/rules index f5b71ebb..a96c8939 100755 --- a/debian/rules +++ b/debian/rules @@ -50,6 +50,7 @@ override_dh_clean: $(RM) -r doc/core/ $(RM) -r doc/ctrl/ $(RM) -r doc/gsm/ + $(RM) -r doc/isdn/ $(RM) -r doc/gb/ $(RM) -r doc/vty/html/ $(RM) -r doc/vty/latex/ diff --git a/include/osmocom/Makefile.am b/include/osmocom/Makefile.am index 1cc3fb7f..33538094 100644 --- a/include/osmocom/Makefile.am +++ b/include/osmocom/Makefile.am @@ -3,6 +3,7 @@ SUBDIRS = \ vty \ codec \ gsm \ + isdn \ crypt \ coding \ gprs \ diff --git a/include/osmocom/gsm/i460_mux.h b/include/osmocom/gsm/i460_mux.h index 770b1e15..7c2f4af3 100644 --- a/include/osmocom/gsm/i460_mux.h +++ b/include/osmocom/gsm/i460_mux.h @@ -1,116 +1,2 @@ -/*! \file i460_mux.h - * ITU-T I.460 sub-channel multiplexer + demultiplexer */ -/* - * (C) 2020 by Harald Welte <laforge@gnumonks.org> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - #pragma once -#include <stdint.h> -#include <osmocom/core/bits.h> -#include <osmocom/core/linuxlist.h> -#include <osmocom/core/msgb.h> - -/* I.460 sub-slot rate */ -enum osmo_i460_rate { - OSMO_I460_RATE_NONE, /* disabled */ - OSMO_I460_RATE_64k, - OSMO_I460_RATE_32k, - OSMO_I460_RATE_16k, - OSMO_I460_RATE_8k, -}; - -struct osmo_i460_subchan; - -typedef void (*out_cb_bits_t)(struct osmo_i460_subchan *schan, void *user_data, - const ubit_t *bits, unsigned int num_bits); -typedef void (*out_cb_bytes_t)(struct osmo_i460_subchan *schan, void *user_data, - const uint8_t *bytes, unsigned int num_bytes); - -struct osmo_i460_subchan_demux { - /*! bit-buffer for output bits */ - uint8_t *out_bitbuf; - /*! size of out_bitbuf in bytes */ - unsigned int out_bitbuf_size; - /*! offset of next bit to be written in out_bitbuf */ - unsigned int out_idx; - /*! callback to be called once we have received out_bitbuf_size bits */ - out_cb_bits_t out_cb_bits; - out_cb_bytes_t out_cb_bytes; - void *user_data; -}; - -typedef void (*in_cb_queue_empty_t)(struct osmo_i460_subchan *schan, void *user_data); - -struct osmo_i460_subchan_mux { - /*! list of to-be-transmitted message buffers */ - struct llist_head tx_queue; - in_cb_queue_empty_t in_cb_queue_empty; - void *user_data; -}; - -struct osmo_i460_subchan { - struct osmo_i460_timeslot *ts; /* back-pointer */ - enum osmo_i460_rate rate; /* 8/16/32/64k */ - uint8_t bit_offset; /* bit offset inside each byte of the B-channel */ - struct osmo_i460_subchan_demux demux; - struct osmo_i460_subchan_mux mux; -}; - -struct osmo_i460_timeslot { - struct osmo_i460_subchan schan[8]; -}; - -/*! description of a sub-channel; passed by caller */ -struct osmo_i460_schan_desc { - enum osmo_i460_rate rate; - uint8_t bit_offset; - struct { - /* size (in bits) of the internal buffer; determines granularity */ - size_t num_bits; - /*! call-back function called whenever we received num_bits */ - out_cb_bits_t out_cb_bits; - /*! out_cb_bytes call-back function called whenever we received num_bits. - * The user is usually expected to provide either out_cb_bits or out_cb_bytes. If only - * out_cb_bits is provided, output data will always be provided as unpacked bits; if only - * out_cb_bytes is provided, output data will always be provided as packet bits (bytes). If - * both are provided, it is up to the I.460 multiplex to decide if it calls either of the two, - * depending on what can be provided without extra conversion. */ - out_cb_bytes_t out_cb_bytes; - /* opaque user data pointer to pass to out_cb */ - void *user_data; - } demux; - - struct { - /* call-back function whenever the muxer requires more input data from the sub-channels, - * but has nothing enqueued yet. A typical function would then call osmo_i460_mux_enqueue() */ - in_cb_queue_empty_t in_cb_queue_empty; - /* opaque user data pointer to pass to in_cb */ - void *user_data; - } mux; -}; - -void osmo_i460_demux_in(struct osmo_i460_timeslot *ts, const uint8_t *data, size_t data_len); - -void osmo_i460_mux_enqueue(struct osmo_i460_subchan *schan, struct msgb *msg); -int osmo_i460_mux_out(struct osmo_i460_timeslot *ts, uint8_t *out, size_t out_len); - -void osmo_i460_ts_init(struct osmo_i460_timeslot *ts); - -struct osmo_i460_subchan * -osmo_i460_subchan_add(void *ctx, struct osmo_i460_timeslot *ts, const struct osmo_i460_schan_desc *chd); - -void osmo_i460_subchan_del(struct osmo_i460_subchan *schan); - -/*! @} */ +#include <osmocom/isdn/i460_mux.h> diff --git a/include/osmocom/gsm/lapd_core.h b/include/osmocom/gsm/lapd_core.h index 3f31881d..a4dc2505 100644 --- a/include/osmocom/gsm/lapd_core.h +++ b/include/osmocom/gsm/lapd_core.h @@ -1,177 +1,2 @@ -/*! \file lapd_core.h - * primitive related stuff - */ #pragma once - -#include <stdint.h> - -#include <osmocom/core/timer.h> -#include <osmocom/core/msgb.h> -#include <osmocom/gsm/prim.h> - -/*! \defgroup lapd LAPD implementation common part - * @{ - * \file lapd_core.h - */ - -#define LOGDL(dl, level, fmt, args...) \ - LOGP(DLLAPD, level, "(%s) " fmt, (dl)->name, ## args) - -/*! LAPD related primitives (L2<->L3 SAP)*/ -enum osmo_dl_prim { - PRIM_DL_UNIT_DATA, /*!< DL-UNIT-DATA */ - PRIM_DL_DATA, /*!< DL-DATA */ - PRIM_DL_EST, /*!< DL-ESTABLISH */ - PRIM_DL_REL, /*!< DL-RLEEASE */ - PRIM_DL_SUSP, /*!< DL-SUSPEND */ - PRIM_DL_RES, /*!< DL-RESUME */ - PRIM_DL_RECON, /*!< DL-RECONNECT */ - PRIM_MDL_ERROR, /*!< MDL-ERROR */ -}; - -/* Uses the same values as RLL, so no conversion for GSM is required. */ -#define MDL_CAUSE_T200_EXPIRED 0x01 -#define MDL_CAUSE_REEST_REQ 0x02 -#define MDL_CAUSE_UNSOL_UA_RESP 0x03 -#define MDL_CAUSE_UNSOL_DM_RESP 0x04 -#define MDL_CAUSE_UNSOL_DM_RESP_MF 0x05 -#define MDL_CAUSE_UNSOL_SPRV_RESP 0x06 -#define MDL_CAUSE_SEQ_ERR 0x07 -#define MDL_CAUSE_UFRM_INC_PARAM 0x08 -#define MDL_CAUSE_SFRM_INC_PARAM 0x09 -#define MDL_CAUSE_IFRM_INC_MBITS 0x0a -#define MDL_CAUSE_IFRM_INC_LEN 0x0b -#define MDL_CAUSE_FRM_UNIMPL 0x0c -#define MDL_CAUSE_SABM_MF 0x0d -#define MDL_CAUSE_SABM_INFO_NOTALL 0x0e -#define MDL_CAUSE_FRMR 0x0f - -/*! for MDL-ERROR.ind */ -struct mdl_error_ind_param { - uint8_t cause; /*!< generic cause value */ -}; - -/*! for DL-REL.req */ -struct dl_rel_req_param { - uint8_t mode; /*!< release mode */ -}; - -/*! primitive header for LAPD DL-SAP primitives */ -struct osmo_dlsap_prim { - struct osmo_prim_hdr oph; /*!< generic primitive header */ - union { - struct mdl_error_ind_param error_ind; - struct dl_rel_req_param rel_req; - } u; /*!< request-specific data */ -}; - -/*! LAPD mode/role */ -enum lapd_mode { - LAPD_MODE_USER, /*!< behave like user */ - LAPD_MODE_NETWORK, /*!< behave like network */ -}; - -/*! LAPD state (Figure B.2/Q.921)*/ -enum lapd_state { - LAPD_STATE_NULL = 0, - LAPD_STATE_TEI_UNASS, - LAPD_STATE_ASS_TEI_WAIT, - LAPD_STATE_EST_TEI_WAIT, - LAPD_STATE_IDLE, - LAPD_STATE_SABM_SENT, - LAPD_STATE_DISC_SENT, - LAPD_STATE_MF_EST, - LAPD_STATE_TIMER_RECOV, -}; - -/*! LAPD message format (I / S / U) */ -enum lapd_format { - LAPD_FORM_UKN = 0, - LAPD_FORM_I, - LAPD_FORM_S, - LAPD_FORM_U, -}; - -/*! LAPD message context */ -struct lapd_msg_ctx { - struct lapd_datalink *dl; - int n201; - /* address */ - uint8_t cr; - uint8_t sapi; - uint8_t tei; - uint8_t lpd; - /* control */ - uint8_t format; - uint8_t p_f; /* poll / final bit */ - uint8_t n_send; - uint8_t n_recv; - uint8_t s_u; /* S or repectivly U function bits */ - /* length */ - int length; - uint8_t more; -}; - -struct lapd_cr_ent { - uint8_t cmd; - uint8_t resp; -}; - -struct lapd_history { - struct msgb *msg; /* message to be sent / NULL, if histoy is empty */ - int more; /* if message is fragmented */ -}; - -/*! LAPD datalink */ -struct lapd_datalink { - int (*send_dlsap)(struct osmo_dlsap_prim *dp, - struct lapd_msg_ctx *lctx); - int (*send_ph_data_req)(struct lapd_msg_ctx *lctx, struct msgb *msg); - int (*update_pending_frames)(struct lapd_msg_ctx *lctx); - struct { - /*! filled-in once we set the lapd_mode above */ - struct lapd_cr_ent loc2rem; - struct lapd_cr_ent rem2loc; - } cr; - enum lapd_mode mode; /*!< current mode of link */ - int use_sabme; /*!< use SABME instead of SABM */ - int reestablish; /*!< enable reestablish support */ - int n200, n200_est_rel; /*!< number of retranmissions */ - struct lapd_msg_ctx lctx; /*!< LAPD context */ - int maxf; /*!< maximum frame size (after defragmentation) */ - uint8_t k; /*!< maximum number of unacknowledged frames */ - uint8_t v_range; /*!< range of sequence numbers */ - uint8_t v_send; /*!< seq nr of next I frame to be transmitted */ - uint8_t v_ack; /*!< last frame ACKed by peer */ - uint8_t v_recv; /*!< seq nr of next I frame expected to be received */ - uint32_t state; /*!< LAPD state (\ref lapd_state) */ - int seq_err_cond; /*!< condition of sequence error */ - uint8_t own_busy; /*!< receiver busy on our side */ - uint8_t peer_busy; /*!< receiver busy on remote side */ - int t200_sec, t200_usec; /*!< retry timer (default 1 sec) */ - int t203_sec, t203_usec; /*!< retry timer (default 10 secs) */ - struct osmo_timer_list t200; /*!< T200 timer */ - struct osmo_timer_list t203; /*!< T203 timer */ - uint8_t retrans_ctr; /*!< re-transmission counter */ - struct llist_head tx_queue; /*!< frames to L1 */ - struct llist_head send_queue; /*!< frames from L3 */ - struct msgb *send_buffer; /*!< current frame transmitting */ - int send_out; /*!< how much was sent from send_buffer */ - struct lapd_history *tx_hist; /*!< tx history structure array */ - uint8_t range_hist; /*!< range of history buffer 2..2^n */ - struct msgb *rcv_buffer; /*!< buffer to assemble the received message */ - struct msgb *cont_res; /*!< buffer to store content resolution data on network side, to detect multiple phones on same channel */ - char *name; /*!< user-provided name */ -}; - -void lapd_dl_init(struct lapd_datalink *dl, uint8_t k, uint8_t v_range, int maxf) - OSMO_DEPRECATED("Use lapd_dl_init2() instead"); -void lapd_dl_init2(struct lapd_datalink *dl, uint8_t k, uint8_t v_range, int maxf, const char *name); -void lapd_dl_set_name(struct lapd_datalink *dl, const char *name); -void lapd_dl_exit(struct lapd_datalink *dl); -void lapd_dl_reset(struct lapd_datalink *dl); -int lapd_set_mode(struct lapd_datalink *dl, enum lapd_mode mode); -int lapd_ph_data_ind(struct msgb *msg, struct lapd_msg_ctx *lctx); -int lapd_recv_dlsap(struct osmo_dlsap_prim *dp, struct lapd_msg_ctx *lctx); - -/*! @} */ +#include <osmocom/isdn/lapd_core.h> diff --git a/include/osmocom/isdn/Makefile.am b/include/osmocom/isdn/Makefile.am new file mode 100644 index 00000000..bf33623a --- /dev/null +++ b/include/osmocom/isdn/Makefile.am @@ -0,0 +1,6 @@ +osmoisdn_HEADERS = \ + i460_mux.h \ + lapd_core.h \ + $(NULL) + +osmoisdndir = $(includedir)/osmocom/isdn diff --git a/include/osmocom/isdn/i460_mux.h b/include/osmocom/isdn/i460_mux.h new file mode 100644 index 00000000..770b1e15 --- /dev/null +++ b/include/osmocom/isdn/i460_mux.h @@ -0,0 +1,116 @@ +/*! \file i460_mux.h + * ITU-T I.460 sub-channel multiplexer + demultiplexer */ +/* + * (C) 2020 by Harald Welte <laforge@gnumonks.org> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#pragma once +#include <stdint.h> +#include <osmocom/core/bits.h> +#include <osmocom/core/linuxlist.h> +#include <osmocom/core/msgb.h> + +/* I.460 sub-slot rate */ +enum osmo_i460_rate { + OSMO_I460_RATE_NONE, /* disabled */ + OSMO_I460_RATE_64k, + OSMO_I460_RATE_32k, + OSMO_I460_RATE_16k, + OSMO_I460_RATE_8k, +}; + +struct osmo_i460_subchan; + +typedef void (*out_cb_bits_t)(struct osmo_i460_subchan *schan, void *user_data, + const ubit_t *bits, unsigned int num_bits); +typedef void (*out_cb_bytes_t)(struct osmo_i460_subchan *schan, void *user_data, + const uint8_t *bytes, unsigned int num_bytes); + +struct osmo_i460_subchan_demux { + /*! bit-buffer for output bits */ + uint8_t *out_bitbuf; + /*! size of out_bitbuf in bytes */ + unsigned int out_bitbuf_size; + /*! offset of next bit to be written in out_bitbuf */ + unsigned int out_idx; + /*! callback to be called once we have received out_bitbuf_size bits */ + out_cb_bits_t out_cb_bits; + out_cb_bytes_t out_cb_bytes; + void *user_data; +}; + +typedef void (*in_cb_queue_empty_t)(struct osmo_i460_subchan *schan, void *user_data); + +struct osmo_i460_subchan_mux { + /*! list of to-be-transmitted message buffers */ + struct llist_head tx_queue; + in_cb_queue_empty_t in_cb_queue_empty; + void *user_data; +}; + +struct osmo_i460_subchan { + struct osmo_i460_timeslot *ts; /* back-pointer */ + enum osmo_i460_rate rate; /* 8/16/32/64k */ + uint8_t bit_offset; /* bit offset inside each byte of the B-channel */ + struct osmo_i460_subchan_demux demux; + struct osmo_i460_subchan_mux mux; +}; + +struct osmo_i460_timeslot { + struct osmo_i460_subchan schan[8]; +}; + +/*! description of a sub-channel; passed by caller */ +struct osmo_i460_schan_desc { + enum osmo_i460_rate rate; + uint8_t bit_offset; + struct { + /* size (in bits) of the internal buffer; determines granularity */ + size_t num_bits; + /*! call-back function called whenever we received num_bits */ + out_cb_bits_t out_cb_bits; + /*! out_cb_bytes call-back function called whenever we received num_bits. + * The user is usually expected to provide either out_cb_bits or out_cb_bytes. If only + * out_cb_bits is provided, output data will always be provided as unpacked bits; if only + * out_cb_bytes is provided, output data will always be provided as packet bits (bytes). If + * both are provided, it is up to the I.460 multiplex to decide if it calls either of the two, + * depending on what can be provided without extra conversion. */ + out_cb_bytes_t out_cb_bytes; + /* opaque user data pointer to pass to out_cb */ + void *user_data; + } demux; + + struct { + /* call-back function whenever the muxer requires more input data from the sub-channels, + * but has nothing enqueued yet. A typical function would then call osmo_i460_mux_enqueue() */ + in_cb_queue_empty_t in_cb_queue_empty; + /* opaque user data pointer to pass to in_cb */ + void *user_data; + } mux; +}; + +void osmo_i460_demux_in(struct osmo_i460_timeslot *ts, const uint8_t *data, size_t data_len); + +void osmo_i460_mux_enqueue(struct osmo_i460_subchan *schan, struct msgb *msg); +int osmo_i460_mux_out(struct osmo_i460_timeslot *ts, uint8_t *out, size_t out_len); + +void osmo_i460_ts_init(struct osmo_i460_timeslot *ts); + +struct osmo_i460_subchan * +osmo_i460_subchan_add(void *ctx, struct osmo_i460_timeslot *ts, const struct osmo_i460_schan_desc *chd); + +void osmo_i460_subchan_del(struct osmo_i460_subchan *schan); + +/*! @} */ diff --git a/include/osmocom/isdn/lapd_core.h b/include/osmocom/isdn/lapd_core.h new file mode 100644 index 00000000..e4e8b469 --- /dev/null +++ b/include/osmocom/isdn/lapd_core.h @@ -0,0 +1,176 @@ +/*! \file lapd_core.h + * primitive related stuff + */ +#pragma once + +#include <stdint.h> + +#include <osmocom/core/timer.h> +#include <osmocom/core/msgb.h> +#include <osmocom/gsm/prim.h> + +/*! \defgroup lapd LAPD implementation common part + * @{ + * \file lapd_core.h + */ + +#define LOGDL(dl, level, fmt, args...) \ + LOGP(DLLAPD, level, "(%s) " fmt, (dl)->name, ## args) + +/*! LAPD related primitives (L2<->L3 SAP)*/ +enum osmo_dl_prim { + PRIM_DL_UNIT_DATA, /*!< DL-UNIT-DATA */ + PRIM_DL_DATA, /*!< DL-DATA */ + PRIM_DL_EST, /*!< DL-ESTABLISH */ + PRIM_DL_REL, /*!< DL-RLEEASE */ + PRIM_DL_SUSP, /*!< DL-SUSPEND */ + PRIM_DL_RES, /*!< DL-RESUME */ + PRIM_DL_RECON, /*!< DL-RECONNECT */ + PRIM_MDL_ERROR, /*!< MDL-ERROR */ +}; + +/* Uses the same values as RLL, so no conversion for GSM is required. */ +#define MDL_CAUSE_T200_EXPIRED 0x01 +#define MDL_CAUSE_REEST_REQ 0x02 +#define MDL_CAUSE_UNSOL_UA_RESP 0x03 +#define MDL_CAUSE_UNSOL_DM_RESP 0x04 +#define MDL_CAUSE_UNSOL_DM_RESP_MF 0x05 +#define MDL_CAUSE_UNSOL_SPRV_RESP 0x06 +#define MDL_CAUSE_SEQ_ERR 0x07 +#define MDL_CAUSE_UFRM_INC_PARAM 0x08 +#define MDL_CAUSE_SFRM_INC_PARAM 0x09 +#define MDL_CAUSE_IFRM_INC_MBITS 0x0a +#define MDL_CAUSE_IFRM_INC_LEN 0x0b +#define MDL_CAUSE_FRM_UNIMPL 0x0c +#define MDL_CAUSE_SABM_MF 0x0d +#define MDL_CAUSE_SABM_INFO_NOTALL 0x0e +#define MDL_CAUSE_FRMR 0x0f + +/*! for MDL-ERROR.ind */ +struct mdl_error_ind_param { + uint8_t cause; /*!< generic cause value */ +}; + +/*! for DL-REL.req */ +struct dl_rel_req_param { + uint8_t mode; /*!< release mode */ +}; + +/*! primitive header for LAPD DL-SAP primitives */ +struct osmo_dlsap_prim { + struct osmo_prim_hdr oph; /*!< generic primitive header */ + union { + struct mdl_error_ind_param error_ind; + struct dl_rel_req_param rel_req; + } u; /*!< request-specific data */ +}; + +/*! LAPD mode/role */ +enum lapd_mode { + LAPD_MODE_USER, /*!< behave like user */ + LAPD_MODE_NETWORK, /*!< behave like network */ +}; + +/*! LAPD state (Figure B.2/Q.921)*/ +enum lapd_state { + LAPD_STATE_NULL = 0, + LAPD_STATE_TEI_UNASS, + LAPD_STATE_ASS_TEI_WAIT, + LAPD_STATE_EST_TEI_WAIT, + LAPD_STATE_IDLE, + LAPD_STATE_SABM_SENT, + LAPD_STATE_DISC_SENT, + LAPD_STATE_MF_EST, + LAPD_STATE_TIMER_RECOV, +}; + +/*! LAPD message format (I / S / U) */ +enum lapd_format { + LAPD_FORM_UKN = 0, + LAPD_FORM_I, + LAPD_FORM_S, + LAPD_FORM_U, +}; + +/*! LAPD message context */ +struct lapd_msg_ctx { + struct lapd_datalink *dl; + int n201; + /* address */ + uint8_t cr; + uint8_t sapi; + uint8_t tei; + uint8_t lpd; + /* control */ + uint8_t format; + uint8_t p_f; /* poll / final bit */ + uint8_t n_send; + uint8_t n_recv; + uint8_t s_u; /* S or repectivly U function bits */ + /* length */ + int length; + uint8_t more; +}; + +struct lapd_cr_ent { + uint8_t cmd; + uint8_t resp; +}; + +struct lapd_history { + struct msgb *msg; /* message to be sent / NULL, if histoy is empty */ + int more; /* if message is fragmented */ +}; + +/*! LAPD datalink */ +struct lapd_datalink { + int (*send_dlsap)(struct osmo_dlsap_prim *dp, struct lapd_msg_ctx *lctx); + int (*send_ph_data_req)(struct lapd_msg_ctx *lctx, struct msgb *msg); + int (*update_pending_frames)(struct lapd_msg_ctx *lctx); + struct { + /*! filled-in once we set the lapd_mode above */ + struct lapd_cr_ent loc2rem; + struct lapd_cr_ent rem2loc; + } cr; + enum lapd_mode mode; /*!< current mode of link */ + int use_sabme; /*!< use SABME instead of SABM */ + int reestablish; /*!< enable reestablish support */ + int n200, n200_est_rel; /*!< number of retranmissions */ + struct lapd_msg_ctx lctx; /*!< LAPD context */ + int maxf; /*!< maximum frame size (after defragmentation) */ + uint8_t k; /*!< maximum number of unacknowledged frames */ + uint8_t v_range; /*!< range of sequence numbers */ + uint8_t v_send; /*!< seq nr of next I frame to be transmitted */ + uint8_t v_ack; /*!< last frame ACKed by peer */ + uint8_t v_recv; /*!< seq nr of next I frame expected to be received */ + uint32_t state; /*!< LAPD state (\ref lapd_state) */ + int seq_err_cond; /*!< condition of sequence error */ + uint8_t own_busy; /*!< receiver busy on our side */ + uint8_t peer_busy; /*!< receiver busy on remote side */ + int t200_sec, t200_usec; /*!< retry timer (default 1 sec) */ + int t203_sec, t203_usec; /*!< retry timer (default 10 secs) */ + struct osmo_timer_list t200; /*!< T200 timer */ + struct osmo_timer_list t203; /*!< T203 timer */ + uint8_t retrans_ctr; /*!< re-transmission counter */ + struct llist_head tx_queue; /*!< frames to L1 */ + struct llist_head send_queue; /*!< frames from L3 */ + struct msgb *send_buffer; /*!< current frame transmitting */ + int send_out; /*!< how much was sent from send_buffer */ + struct lapd_history *tx_hist; /*!< tx history structure array */ + uint8_t range_hist; /*!< range of history buffer 2..2^n */ + struct msgb *rcv_buffer; /*!< buffer to assemble the received message */ + struct msgb *cont_res; /*!< buffer to store content resolution data on network side, to detect multiple phones on same channel */ + char *name; /*!< user-provided name */ +}; + +void lapd_dl_init(struct lapd_datalink *dl, uint8_t k, uint8_t v_range, int maxf) + OSMO_DEPRECATED("Use lapd_dl_init2() instead"); +void lapd_dl_init2(struct lapd_datalink *dl, uint8_t k, uint8_t v_range, int maxf, const char *name); +void lapd_dl_set_name(struct lapd_datalink *dl, const char *name); +void lapd_dl_exit(struct lapd_datalink *dl); +void lapd_dl_reset(struct lapd_datalink *dl); +int lapd_set_mode(struct lapd_datalink *dl, enum lapd_mode mode); +int lapd_ph_data_ind(struct msgb *msg, struct lapd_msg_ctx *lctx); +int lapd_recv_dlsap(struct osmo_dlsap_prim *dp, struct lapd_msg_ctx *lctx); + +/*! @} */ diff --git a/libosmogsm.pc.in b/libosmogsm.pc.in index 0aaf51ed..17b9212a 100644 --- a/libosmogsm.pc.in +++ b/libosmogsm.pc.in @@ -6,6 +6,6 @@ includedir=@includedir@ Name: Osmocom GSM Core Library Description: GSM Core Library Version: @VERSION@ -Requires: talloc, libosmocore +Requires: talloc, libosmocore, libosmoisdn Libs: -L${libdir} -losmogsm Cflags: -I${includedir}/ diff --git a/libosmoisdn.pc.in b/libosmoisdn.pc.in new file mode 100644 index 00000000..fedbb694 --- /dev/null +++ b/libosmoisdn.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: Osmocom ISDN Library +Description: ISDN Library +Version: @VERSION@ +Requires: talloc, libosmocore +Libs: -L${libdir} -losmoisdn +Cflags: -I${includedir}/ diff --git a/src/Makefile.am b/src/Makefile.am index 5d8343c8..86066466 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -1,6 +1,7 @@ SUBDIRS = \ core \ vty \ + isdn \ codec \ gsm \ coding \ diff --git a/src/gsm/Makefile.am b/src/gsm/Makefile.am index eb0f7e45..aa2e6ec2 100644 --- a/src/gsm/Makefile.am +++ b/src/gsm/Makefile.am @@ -25,18 +25,18 @@ libgsmint_la_SOURCES = a5.c rxlev_stat.c tlv_parser.c comp128.c comp128v23.c \ gsm48_ie.c gsm0808.c sysinfo.c \ gprs_cipher_core.c gprs_rlc.c gsm0480.c abis_nm.c gsm0502.c \ gsm0411_utils.c gsm0411_smc.c gsm0411_smr.c gsm0414.c \ - lapd_core.c lapdm.c kasumi.c gsm29205.c gsm_04_08_gprs.c \ + lapdm.c kasumi.c gsm29205.c gsm_04_08_gprs.c \ auth_core.c auth_comp128v1.c auth_comp128v23.c auth_xor.c \ auth_milenage.c milenage/aes-encblock.c gea.c \ milenage/aes-internal.c milenage/aes-internal-enc.c \ milenage/milenage.c gan.c ipa.c gsm0341.c apn.c \ gsup.c gsup_sms.c gprs_gea.c gsm0503_conv.c oap.c gsm0808_utils.c \ gsm23003.c gsm23236.c mncc.c bts_features.c oap_client.c \ - gsm29118.c gsm48_rest_octets.c cbsp.c gsm48049.c i460_mux.c \ + gsm29118.c gsm48_rest_octets.c cbsp.c gsm48049.c \ gad.c bsslap.c bssmap_le.c kdf.c iuup.c libgsmint_la_LDFLAGS = -no-undefined -libgsmint_la_LIBADD = $(top_builddir)/src/core/libosmocore.la +libgsmint_la_LIBADD = $(top_builddir)/src/core/libosmocore.la $(top_builddir)/src/isdn/libosmoisdn.la libosmogsm_la_SOURCES = libosmogsm_la_LDFLAGS = $(LTLDFLAGS_OSMOGSM) -version-info $(LIBVERSION) -no-undefined diff --git a/src/isdn/Makefile.am b/src/isdn/Makefile.am new file mode 100644 index 00000000..97e7a280 --- /dev/null +++ b/src/isdn/Makefile.am @@ -0,0 +1,25 @@ +# This is _NOT_ the library release version, it's an API version. +# Please read chapter "Library interface versions" of the libtool documentation +# before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html +LIBVERSION=0:0:0 + +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include +AM_CFLAGS = -Wall $(TALLOC_CFLAGS) + +if ENABLE_PSEUDOTALLOC +AM_CPPFLAGS += -I$(top_srcdir)/src/pseudotalloc +endif + +noinst_LTLIBRARIES = libisdnint.la +lib_LTLIBRARIES = libosmoisdn.la + +libisdnint_la_SOURCES = i460_mux.c lapd_core.c + +libisdnint_la_LDFLAGS = -no-undefined +libisdnint_la_LIBADD = $(top_builddir)/src/core/libosmocore.la + +libosmoisdn_la_SOURCES = +libosmoisdn_la_LDFLAGS = $(LTLDFLAGS_OSMOISDN) -version-info $(LIBVERSION) -no-undefined +libosmoisdn_la_LIBADD = libisdnint.la $(TALLOC_LIBS) + +EXTRA_DIST = libosmoisdn.map diff --git a/src/gsm/i460_mux.c b/src/isdn/i460_mux.c index a6a0835c..eeaed3c7 100644 --- a/src/gsm/i460_mux.c +++ b/src/isdn/i460_mux.c @@ -21,7 +21,7 @@ #include <osmocom/core/bits.h> #include <osmocom/core/utils.h> #include <osmocom/core/msgb.h> -#include <osmocom/gsm/i460_mux.h> +#include <osmocom/isdn/i460_mux.h> /* count the number of sub-channels in this I460 slot */ static int osmo_i460_subchan_count(struct osmo_i460_timeslot *ts) diff --git a/src/gsm/lapd_core.c b/src/isdn/lapd_core.c index 7441285d..6475cb0f 100644 --- a/src/gsm/lapd_core.c +++ b/src/isdn/lapd_core.c @@ -79,7 +79,7 @@ #include <osmocom/core/msgb.h> #include <osmocom/core/utils.h> #include <osmocom/core/talloc.h> -#include <osmocom/gsm/lapd_core.h> +#include <osmocom/isdn/lapd_core.h> #include <osmocom/gsm/rsl.h> /* TS 04.06 Table 4 / Section 3.8.1 */ diff --git a/src/isdn/libosmoisdn.map b/src/isdn/libosmoisdn.map new file mode 100644 index 00000000..76e8c813 --- /dev/null +++ b/src/isdn/libosmoisdn.map @@ -0,0 +1,24 @@ +LIBOSMOISDN_1.0 { +global: + +tall_lapd_ctx; +lapd_dl_exit; +lapd_dl_init; +lapd_dl_init2; +lapd_dl_set_name; +lapd_dl_reset; +lapd_msgb_alloc; +lapd_ph_data_ind; +lapd_recv_dlsap; +lapd_set_mode; +lapd_state_names; + +osmo_i460_demux_in; +osmo_i460_mux_enqueue; +osmo_i460_mux_out; +osmo_i460_subchan_add; +osmo_i460_subchan_del; +osmo_i460_ts_init; + +local: *; +}; diff --git a/tests/Makefile.am b/tests/Makefile.am index 78666e9d..a28aa7fc 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -160,7 +160,7 @@ gprs_gprs_test_SOURCES = gprs/gprs_test.c gprs_gprs_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la lapd_lapd_test_SOURCES = lapd/lapd_test.c -lapd_lapd_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la +lapd_lapd_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la $(top_builddir)/src/isdn/libosmoisdn.la msgb_msgb_test_SOURCES = msgb/msgb_test.c @@ -315,7 +315,7 @@ exec_exec_test_SOURCES = exec/exec_test.c exec_exec_test_LDADD = $(LDADD) i460_mux_i460_mux_test_SOURCES = i460_mux/i460_mux_test.c -i460_mux_i460_mux_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la +i460_mux_i460_mux_test_LDADD = $(LDADD) $(top_builddir)/src/isdn/libosmoisdn.la bitgen_bitgen_test_SOURCES = bitgen/bitgen_test.c bitgen_bitgen_test_LDADD = $(LDADD) diff --git a/tests/i460_mux/i460_mux_test.c b/tests/i460_mux/i460_mux_test.c index 7695cb4a..1be35e7d 100644 --- a/tests/i460_mux/i460_mux_test.c +++ b/tests/i460_mux/i460_mux_test.c @@ -1,7 +1,7 @@ #include <osmocom/core/utils.h> -#include <osmocom/gsm/i460_mux.h> +#include <osmocom/isdn/i460_mux.h> static void bits_cb(struct osmo_i460_subchan *schan, void *user_data, const ubit_t *bits, unsigned int num_bits) |