/* packet-nb_rtpmux.c * Routines for 3GPP RTP Multiplex dissection, 3GPP TS 29.414 * Copyright 2009, ip.access ltd * * Wireshark - Network traffic analyzer * By Gerald Combs * Copyright 1998 Gerald Combs * * SPDX-License-Identifier: GPL-2.0-or-later */ #include "config.h" #include void proto_register_nb_rtpmux(void); void proto_reg_handoff_nb_rtpmux(void); /* Initialize the protocol and registered fields */ static int proto_nb_rtpmux = -1; static int hf_nb_rtpmux_compressed = -1; static int hf_nb_rtpmux_dstport = -1; static int hf_nb_rtpmux_length = -1; static int hf_nb_r_bit = -1; static int hf_nb_rtpmux_srcport = -1; static int hf_nb_rtpmux_data = -1; static int hf_nb_rtpmux_cmp_rtp_sequence_no = -1; static int hf_nb_rtpmux_cmp_rtp_timestamp = -1; static int hf_nb_rtpmux_cmp_rtp_data = -1; /* Initialize the subtree pointers */ static gint ett_nb_rtpmux = -1; static gint ett_nb_rtpmux_cmp_rtp_hdr = -1; static dissector_handle_t rtpdissector; static int dissect_nb_rtpmux(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { /* Set up structures needed to add the protocol subtree and manage it */ proto_item *ti; proto_tree *nb_rtpmux_tree, *nb_rtpmux_cmp_rtp_tree; unsigned int offset = 0; gboolean first_rtp_payload_seen = FALSE; /* First, if at all possible, do some heuristics to check if the packet cannot * possibly belong to your protocol. This is especially important for * protocols directly on top of TCP or UDP where port collisions are * common place (e.g., even though your protocol uses a well known port, * someone else may set up, for example, a web server on that port which, * if someone analyzed that web server's traffic in Wireshark, would result * in Wireshark handing an HTTP packet to your dissector). For example: */ /* * XXX - this is *FAR* too weak a heuristic; it could cause all sorts * of stuff to be incorrectly identified as Nb_RTPmux. Either this * needs a stronger heuristic, or it needs to have a preference to * set the port on which to dissect it, or it needs to be a non-heuristic * dissector and *require* that a user use "Decode As..." to decode * traffic as Nb_RTPmux. * * Look for a payload that looks like an RTP packet, using the * same (weakish) heuristics as RTP uses? */ /* Check that there's enough data */ if (tvb_captured_length(tvb) < 6) return 0; /* Make entries in Protocol column and Info column on summary display */ col_set_str(pinfo->cinfo, COL_PROTOCOL, "NB_RTPMUX"); /* NOTE: The offset and length values in the call to "proto_tree_add_item()" define what data bytes to highlight in the hex display window when the line in the protocol tree display corresponding to that item is selected. Supplying a length of -1 is the way to highlight all data from the offset to the end of the packet. */ /* create display subtree for the protocol */ while (offset < tvb_reported_length(tvb)-5) { guint16 dstport, srcport; unsigned int length; gint captured_length; tvbuff_t *next_tvb; gboolean tbit; length = tvb_get_guint8(tvb, offset+2); ti = proto_tree_add_item(tree, proto_nb_rtpmux, tvb, offset, length+5, ENC_NA); nb_rtpmux_tree = proto_item_add_subtree(ti, ett_nb_rtpmux); /* T bit */ proto_tree_add_item(nb_rtpmux_tree, hf_nb_rtpmux_compressed, tvb, offset, 2, ENC_BIG_ENDIAN); tbit = tvb_get_guint8(tvb,offset)>>7; if(tbit == 1){ /* 6.4.2.4 Transport Format for multiplexing with RTP header compression */ dstport = (tvb_get_ntohs(tvb, offset) & 0x7fff) << 1; proto_tree_add_uint(nb_rtpmux_tree, hf_nb_rtpmux_dstport, tvb, offset, 2, dstport ); proto_tree_add_item(nb_rtpmux_tree, hf_nb_rtpmux_length, tvb, offset+2, 1, ENC_BIG_ENDIAN); proto_tree_add_item(nb_rtpmux_tree, hf_nb_r_bit, tvb, offset+3, 2, ENC_BIG_ENDIAN); srcport = (tvb_get_ntohs(tvb, offset+3) & 0x7fff) << 1; proto_tree_add_uint(nb_rtpmux_tree, hf_nb_rtpmux_srcport, tvb, offset+3, 2, srcport ); nb_rtpmux_cmp_rtp_tree = proto_tree_add_subtree( nb_rtpmux_tree, tvb, offset+5, 3, ett_nb_rtpmux_cmp_rtp_hdr, NULL, "Compressed RTP header" ); /* Sequence Number (SN) */ proto_tree_add_item(nb_rtpmux_cmp_rtp_tree, hf_nb_rtpmux_cmp_rtp_sequence_no, tvb, offset+5, 1, ENC_BIG_ENDIAN); /* Timestamp (TS) */ proto_tree_add_item(nb_rtpmux_cmp_rtp_tree, hf_nb_rtpmux_cmp_rtp_timestamp, tvb, offset+6, 2, ENC_BIG_ENDIAN); if (length != 0) proto_tree_add_item(nb_rtpmux_cmp_rtp_tree, hf_nb_rtpmux_cmp_rtp_data,tvb, offset+8, length-3, ENC_NA); /* Not trying to decompress... */ /* Add summary to protocol root */ proto_item_append_text(ti, ", Src Port: %u, Dst Port: %u Length: %u", srcport, dstport, length); }else{ /* 6.4.2.3 Transport Format for multiplexing without RTP Header Compression */ dstport = (tvb_get_ntohs(tvb, offset) & 0x7fff) << 1; proto_tree_add_uint(nb_rtpmux_tree, hf_nb_rtpmux_dstport, tvb, offset, 2, dstport ); proto_tree_add_item(nb_rtpmux_tree, hf_nb_rtpmux_length, tvb, offset+2, 1, ENC_BIG_ENDIAN); proto_tree_add_item(nb_rtpmux_tree, hf_nb_r_bit, tvb, offset+3, 1, ENC_BIG_ENDIAN); srcport = (tvb_get_ntohs(tvb, offset+3) & 0x7fff) << 1; proto_tree_add_uint(nb_rtpmux_tree, hf_nb_rtpmux_srcport, tvb, offset+3, 2, srcport ); /* Add summary to protocol root */ proto_item_append_text(ti, ", Src Port: %u, Dst Port: %u Length: %u", srcport, dstport, length); if (length != 0) { /* We have an RTP payload. */ if (rtpdissector) { captured_length = tvb_reported_length_remaining(tvb, offset + 5); if (captured_length > (gint)length) captured_length = length; next_tvb = tvb_new_subset_length_caplen(tvb, offset+5, captured_length, length); if (first_rtp_payload_seen) { /* Don't want to clear the column, instead show where multiple RTP frames are being carried */ col_append_str(pinfo->cinfo, COL_INFO, " | "); col_set_fence(pinfo->cinfo, COL_INFO); } call_dissector(rtpdissector, next_tvb, pinfo, nb_rtpmux_tree); first_rtp_payload_seen = TRUE; } else { proto_tree_add_item(nb_rtpmux_tree, hf_nb_rtpmux_data, tvb, offset+5, length, ENC_NA); } } } /* if tbit */ offset += 5+length; } /* Return the amount of data this dissector was able to dissect */ return tvb_reported_length(tvb); } /* Register the protocol with Wireshark */ void proto_register_nb_rtpmux(void) { static hf_register_info hf[] = { { &hf_nb_rtpmux_compressed, { "Compressed headers(T bit)", "nb_rtpmux.compressed", FT_BOOLEAN, 16, NULL, 0x8000, NULL, HFILL } }, { &hf_nb_rtpmux_dstport, { "Dst port", "nb_rtpmux.dstport", FT_UINT16, BASE_DEC, NULL, 0x0, NULL, HFILL } }, { &hf_nb_rtpmux_length, { "Length", "nb_rtpmux.length", FT_UINT8, BASE_DEC, NULL, 0x00, NULL, HFILL } }, { &hf_nb_r_bit, { "R bit", "nb_rtpmux.r_bit", FT_BOOLEAN, 16, NULL, 0x8000, NULL, HFILL } }, { &hf_nb_rtpmux_srcport, { "Src port", "nb_rtpmux.srcport", FT_UINT16, BASE_DEC, NULL, 0x0, NULL, HFILL } }, { &hf_nb_rtpmux_data, { "RTP Packet", "nb_rtpmux.data", FT_BYTES, BASE_NONE, NULL, 0x00, NULL, HFILL } }, { &hf_nb_rtpmux_cmp_rtp_sequence_no, { "Sequence Number", "nb_rtpmux.cmp_rtp.sequence_no", FT_UINT16, BASE_DEC, NULL, 0x00, NULL, HFILL } }, { &hf_nb_rtpmux_cmp_rtp_timestamp, { "Timestamp", "nb_rtpmux.cmp_rtp.timestamp", FT_UINT16, BASE_DEC, NULL, 0x00, NULL, HFILL } }, { &hf_nb_rtpmux_cmp_rtp_data, { "RTP Data", "nb_rtpmux.cmp_rtp.data", FT_BYTES, BASE_NONE, NULL, 0x00, NULL,HFILL } } }; /* Setup protocol subtree array */ static gint *ett[] = { &ett_nb_rtpmux, &ett_nb_rtpmux_cmp_rtp_hdr }; /* Register the protocol name and description */ proto_nb_rtpmux = proto_register_protocol("3GPP Nb Interface RTP Multiplex", "NB_RTPMUX", "nb_rtpmux"); register_dissector("nb_rtpmux", dissect_nb_rtpmux, proto_nb_rtpmux); /* Required function calls to register the header fields and subtrees used */ proto_register_field_array(proto_nb_rtpmux, hf, array_length(hf)); proto_register_subtree_array(ett, array_length(ett)); } void proto_reg_handoff_nb_rtpmux(void) { dissector_handle_t nb_rtpmux_handle; nb_rtpmux_handle = create_dissector_handle(dissect_nb_rtpmux, proto_nb_rtpmux); dissector_add_uint_range_with_preference("udp.port", "", nb_rtpmux_handle); rtpdissector = find_dissector_add_dependency("rtp", proto_nb_rtpmux); } /* * Editor modelines - http://www.wireshark.org/tools/modelines.html * * Local variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * vi: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */