/* packet-f5ethtrailer.c * * F5 Ethernet Trailer Copyright 2008-2018 F5 Networks * * SPDX-License-Identifier: GPL-2.0-or-later */ /* Supported Platforms: BIG-IP 9.4.2 - 13.x for the old format trailers BIG-IP 11.2.0 and later for fileinfo BIG-IP 14.0 began using the new format trailers Usage: * Acquire capture files using the following command line: * tcpdump -w capture.pcap -s0 -i internal:nnn * Load the capture file into wireshark. * Observe the grammar added to the beginning of each packet in the "Info" column of the packet list pane. * Observe the added "F5 Ethernet trailer" section in the packet detail pane. * These fields are filterable like any other field. * Review the preferences for the dissector. * If you are missing the Low details of the trailer for some packets, try modifying the settings for the Ethernet dissector. Go to "Edit/Preferences...", expand "Protocols" on the left and select "Ethernet". Disable "Assume short frames which include a trailer contain padding". Notes: Follow F5 Conversation: As an alternative to the Populate Fields for Other Dissectors below, you can now follow a connection through the BIG-IP using the main menu Analyze/Conversation Filter menu. There are three options: follow "F5 IP", "F5 TCP" or "F5 UDP". Select a frame and choose the appropriate menu item. For best results, disable Populate Fields for Other Dissectors. This method of following a conversation should avoid the stray packets problem mentioned below. These menu selections will populate an appropriate filter expression with ip.addr, tcp.port or udp.port, f5ethtrailer.peeraddr, f5ethtrailer.peerport and f5ethtrailer.peeripproto. You will need to have gathered the capture with high noise (":nnn") to contain the peer flow information in order for this to work. Populate Fields for Other Dissectors: The populate fields for other dissectors will add hidden fields to the f5ethtrailer for "ip.addr", "ipv6.addr", "tcp.port" and "udp.port" based on information in high noise of a packet. This will allow the "Conversation Filter" option in Wireshark to find both the client-side and server-side flows for a connection. In order to use this, you will need to enable the "Populate fields for other dissectors" preference. Note that the fields are registered when the preference is enabled. After changing the preference, you may need to restart Wireshark for proper handling. Please note that this may cause some stray packets to show up in filter results since, for example, "tcp.port eq A and tcp.port eq B" can now be matching on at least four fields (tcp.port from the TCP dissector and tcp.port from the f5ethtrailer dissector) and a filter can match on an address/port from the IP/TCP/UDP dissector or an address/port from the f5ethtrailer dissector. For example, given two connections: client:12345 <-> VIP:443 {BIGIP} clientS:12346 <-> poolmember:80 client:12346 <-> VIP:443 {BIGIP} clientS:12347 <-> poolmember:80 Selecting "Conversation Filter->TCP" on the client side of the second connection will result in a filter of: ip.addr eq client and ip.addr eq VIP and tcp.port eq 12346 and tcp.port eq 443 All four flows would be displayed by the filter: * From client:12345 <-> VIP:443 (unexpected) - ip.addr from ip.src matches. - ip.addr from ip.dst matches. - tcp.port from f5ethtrailer.peerlocalport matches. - tcp.port from tcp.dstport matches. * From clientS:12346 <-> poolmember:80 (unexpected) - ip.addr from f5ethtrailer.peerremoteaddr matches. - ip.addr from f5ethtrailer.peerlocaladdr matches. - tcp.port from tcp.srcport matches. - tcp.port from f5ethtrailer.peerlocalport matches. * From client:12346 <-> VIP:443 (expected) - ip.addr from ip.src matches. - ip.addr from ip.dst matches. - tcp.port from tcp.srcport matches. - tcp.port from tcp.dstport matches. * From clientS:12347 <-> poolmember:80 (desired) - ip.addr from f5ethtrailer.peerremoteaddr matches. - ip.addr from f5ethtrailer.peerlocaladdr matches. - tcp.port from f5ethtrailer.peerremoteport matches. - tcp.port from f5ethtrailer.peerlocalport matches. You can filter based on IP/port information by disabling the "Populate fields for other dissectors" and creating your own filter like: ( ip.addr eq client and ip.addr eq VIP and tcp.port eq 12346 and tcp.port eq 443 ) or ( f5ethtrailer.peeraddr eq client and f5ethtrailer.peeraddr eq VIP and f5ethtrailer.peerport eq 12346 and f5ethtrailer.peerport eq 443 ) Since the preference is disabled by default, it should not cause any interference unless the user actively enables the preference. Analysis: The f5ethtrailer dissector can add an "F5 Analysis" subtree to the "F5 Ethernet trailer" protocol tree. The items added here are also added to Wireshark expert info. The analysis done is intended to help spot traffic anomalies. Possible Analysis: * Flow reuse or SYN retransmit Filter field name: f5ethtrailer.analysis.flowreuse This is intended to highlight initial packets that arrive that match a pre-existing flow. In other words, a TCP SYN packet that arrives and matches an existing flow. This can indicate: - A prior flow was not properly terminated and a new flow is starting. - A stray SYN has arrived for an existing connection. - A SYN has been retransmitted (the first SYN would have created the flow that subsequent SYNs would match). * Flow lost, incorrect VLAN, loose initiation, tunnel or SYN cookie use Filter field name: f5ethtrailer.analysis.flowlost This is intended to highlight non-initial packets that arrive that do not match an existing flow. In other words, a TCP non-SYN packet arriving that does not match an existing flow. This can indicate: - The flow is no longer in the BIGIP's connection table. - VLAN keyed connections is in use (the default) and a packet arrived on an incorrect VLAN. - A stray packet has arrived. - The packet may be handled by a virtual server with loose initiation. In this case, a packet in the middle of a TCP conversation could arrive and then be handled by a virtual server that has loose initiation enabled to create a flow. - The packet may be the inner payload of a tunnel. For inbound tunnel traffic, the encapsulating packet is shown as well as the encapsulated packet (and the encapsulated packet may not have flow information). - SYN cookies are being used (the initial SYN would not have created a flow). A few notes. The analysis is implemented by using Wireshark taps and tapping the IP/IPv6/TCP dissectors. The taps are not called until after packet dissection is completely finished. So, the f5ethtrailer dissector may not have the necessary data to draw conclusions. The traffic light in the lower left corner of the Wireshark GUI might not properly reflect the existence of these analysis fields. Hiding Slot Information in Info Column: You can now specify which platforms will display slot information in the summary in the info columns. In the preferences for the F5 Ethernet trailer dissector, you can provide a regular expression to match the platform in F5 tcpdump header packet. If there is no platform information in the header (or there is no header at all), slot information will always be displayed. A reasonable regular expression would be "^(A.*|Z101)$" to match chassis and vCMP platforms (there is no distinction for vCMP on a chassis versus an appliance). The default is to always display slot information (no regular expression is provided by default). Statistics reports: All statistics are reported as packet counts and byte counts. Byte count statistics do not include the bytes of the trailer. Statistics menu now has: F5/Virtual Server Distribution A line for each named virtual server name A line for traffic with a flow ID and no virtual server name A line for traffic without a flow ID. F5/tmm Distribution A line for each tmm. A line each for ingress and egress (should add to tmm total) A line each for (should add to tmm total) Traffic with a virtual server name Traffic with a flow ID and no virtual server name Traffic without a flow ID. */ #include "config.h" #include #include #include #include #include #include #include #include #include #include #include "packet-ip.h" #include "packet-tcp.h" #include #include #include #define F5FILEINFOTAP_SRC #include "packet-f5ethtrailer.h" #undef F5FILEINFOTAP_SRC #include /* Wireshark ID of the F5ETHTRAILER protocol */ static int proto_f5ethtrailer; static int tap_f5ethtrailer = -1; static int proto_f5fileinfo; static int tap_f5fileinfo = -1; /** Helper dissector for DPT format noise */ static int proto_f5ethtrailer_dpt_noise; void proto_reg_handoff_f5ethtrailer(void); void proto_register_f5ethtrailer(void); void proto_reg_handoff_f5fileinfo(void); void proto_register_f5fileinfo(void); static dissector_handle_t f5dpt_noise_handle; static dissector_handle_t f5dpt_tls_handle; /* Common Fields */ static gint hf_provider; static gint hf_type; static gint hf_length; static gint hf_version; static gint hf_data; static gint hf_data_str; static gint hf_dpt_unknown; static gint hf_trailer_hdr; static gint hf_orig_fcs; /* Low */ static gint hf_low_id; static gint hf_flags; static gint hf_flags_ingress; static gint hf_flags_hwaction; static gint hf_ingress; static gint hf_slot0; static gint hf_slot1; static gint hf_tmm; static gint hf_obj_name_type; static gint hf_obj_data_len; static gint hf_vipnamelen; static gint hf_vip; static gint hf_portnamelen; static gint hf_phys_port; static gint hf_trunknamelen; static gint hf_trunk; /* Med */ static gint hf_med_id; static gint hf_flow_id; static gint hf_peer_id; static gint hf_any_flow; static gint hf_cf_flags; static gint hf_cf_flags2; static gint hf_flow_type; static gint hf_ha_unit; static gint hf_reserved; static gint hf_priority; static gint hf_rstcause; static gint hf_rstcause_len; static gint hf_rstcause_ver; static gint hf_rstcause_peer; static gint hf_rstcause_val; static gint hf_rstcause_line; static gint hf_rstcause_txt; /* High */ static gint hf_high_id; static gint hf_peer_ipproto; static gint hf_peer_vlan; static gint hf_peer_remote_addr; static gint hf_peer_remote_ip6addr; static gint hf_peer_remote_rtdom; static gint hf_peer_local_addr; static gint hf_peer_local_ip6addr; static gint hf_peer_local_rtdom; static gint hf_peer_ipaddr; static gint hf_peer_ip6addr; static gint hf_peer_rtdom; static gint hf_peer_remote_port; static gint hf_peer_local_port; static gint hf_peer_port; static gint hf_peer_nopeer; /* Analysis */ static gint hf_analysis; /* These fields will be used if pref_pop_other_fields is enabled. They will be populated with data from the "high" trailer so that filtering on ip.addr, tcp.port, etc... can find peer side flows of the specific flow you're searching for. */ static gint hf_ip_ipaddr; static gint hf_ip6_ip6addr; static gint hf_tcp_tcpport; static gint hf_udp_udpport; static gint hf_dpt_magic; static gint hf_dpt_ver; static gint hf_dpt_len; static expert_field ei_f5eth_flowlost; static expert_field ei_f5eth_flowreuse; static expert_field ei_f5eth_badlen; static expert_field ei_f5eth_undecoded; /* These are the ids of the subtrees that we may be creating */ static gint ett_f5ethtrailer; static gint ett_f5ethtrailer_unknown; static gint ett_f5ethtrailer_low; static gint ett_f5ethtrailer_low_flags; static gint ett_f5ethtrailer_med; static gint ett_f5ethtrailer_high; static gint ett_f5ethtrailer_rstcause; static gint ett_f5ethtrailer_trailer_hdr; static gint ett_f5ethtrailer_obj_names; /* For fileinformation */ static gint hf_fi_command; static gint hf_fi_version; static gint hf_fi_hostname; static gint hf_fi_platform; static gint hf_fi_platformname; static gint hf_fi_product; static gint hf_fi_session; /* Wireshark preference to show RST cause in info column */ static gboolean rstcause_in_info = TRUE; /** Wireshark preference to look at all trailer bytes for f5ethtrailer */ static gboolean pref_walk_trailer = FALSE; /* Wireshark preference to enable/disable the population of other dissectors' * fields.*/ static gboolean pref_pop_other_fields = FALSE; /** Wireshark preference to perform analysis */ static gboolean pref_perform_analysis = FALSE; /** Wireshark preference to generate keylog entries from f5ethtrailer TLS data */ static gboolean pref_generate_keylog = TRUE; /** Identifiers for taps (when enabled), only the address is important, the * values are unused. */ static gboolean tap_ip_enabled; static gboolean tap_ipv6_enabled; static gboolean tap_tcp_enabled; /** Used "in" and "out" map for the true and false for ingress. (Not actually * used in field definition, but rather used to display via a format call * and in the info column information.) */ static const true_false_string f5tfs_ing = {"IN", "OUT"}; static const value_string f5_flags_ingress_vs[] = { {0, "Out"}, {1, "In"}, {0, NULL} }; /** Strings for decoding the hardware action */ static const value_string f5_flags_hwaction_vs[] = { {0, "Not set"}, {1, "Challenge"}, {2, "Drop"}, {3, "Forward"}, {0, NULL} }; static int * const hf_flags__fields[] = { &hf_flags_ingress, &hf_flags_hwaction, NULL, }; typedef enum { NONE, NEW_FORMAT, OLD_FORMAT, } found_t; /** Table containing subdissectors for different providers * These are used with new format trailers */ static dissector_table_t provider_subdissector_table; static dissector_table_t noise_subdissector_table; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Convert a Wireshark port type to a IP protocol number. * * @attention Not all port types are supported, only the ones that this dissector actively uses. * * @param ptype The Wireshark port_type * @return The IP protocol number corresponding to the port type. */ inline static guint8 ptype_to_ipproto(const port_type ptype) { guint8 ipproto = 0; switch (ptype) { case PT_TCP: ipproto = IP_PROTO_TCP; break; case PT_UDP: ipproto = IP_PROTO_UDP; break; default: ipproto = 0; break; } return ipproto; } /* ptype_to_ipproto() */ /*===============================================================================================*/ /* Analyze menu functions */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Determines if we can apply an IP Conversation filter. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3 data. * @return True if it is valid IP/IPv6, false otherwise */ static gboolean f5_ip_conv_valid(packet_info *pinfo, void *user_data _U_) { gboolean is_ip = FALSE; gboolean is_f5ethtrailer = FALSE; proto_get_frame_protocols(pinfo->layers, &is_ip, NULL, NULL, NULL, NULL, NULL, NULL); is_f5ethtrailer = proto_is_frame_protocol(pinfo->layers, "f5ethtrailer"); return is_ip && is_f5ethtrailer; } /* f5_ip_conv_valid() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Determines if we can apply a TCP Conversation filter. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3/L4 data. * @return True if it is valid IP/IPv6 + TCP, false otherwise */ static gboolean f5_tcp_conv_valid(packet_info *pinfo, void *user_data _U_) { gboolean is_ip = FALSE; gboolean is_tcp = FALSE; gboolean is_f5ethtrailer = FALSE; proto_get_frame_protocols(pinfo->layers, &is_ip, &is_tcp, NULL, NULL, NULL, NULL, NULL); is_f5ethtrailer = proto_is_frame_protocol(pinfo->layers, "f5ethtrailer"); return is_ip && is_tcp && is_f5ethtrailer; } /* f5_tcp_conv_valid() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Determines if we can apply a UDP Conversation filter. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3/L4 data. * @return True if it is valid IP/IPv6 + UDP, false otherwise */ static gboolean f5_udp_conv_valid(packet_info *pinfo, void *user_data _U_) { gboolean is_ip = FALSE; gboolean is_udp = FALSE; gboolean is_f5ethtrailer = FALSE; proto_get_frame_protocols(pinfo->layers, &is_ip, NULL, &is_udp, NULL, NULL, NULL, NULL); is_f5ethtrailer = proto_is_frame_protocol(pinfo->layers, "f5ethtrailer"); return is_ip && is_udp && is_f5ethtrailer; } /* f5_tcp_conv_valid() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Calculates the F5 IP conversation filter based on the current packet. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3/L4 data. * @return A filter string for the F5 IP conversation or NULL if no filter can be * computed. The caller should free this string with g_free(). * * @attention This function uses ws_strdup_printf() rather than the wmem equivalent because the * caller (menu_dissector_filter_cb()) uses g_free to free the filter string. * (as of WS 1.12). */ static gchar * f5_ip_conv_filter(packet_info *pinfo, void *user_data _U_) { gchar *buf = NULL; gchar src_addr[WS_INET6_ADDRSTRLEN]; gchar dst_addr[WS_INET6_ADDRSTRLEN]; *dst_addr = *src_addr = '\0'; if (pinfo->net_src.type == AT_IPv4 && pinfo->net_dst.type == AT_IPv4) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ip.addr eq %s and ip.addr eq %s) or" " (f5ethtrailer.peeraddr eq %s and f5ethtrailer.peeraddr eq %s)", src_addr, dst_addr, src_addr, dst_addr); } } else if (pinfo->net_src.type == AT_IPv6 && pinfo->net_dst.type == AT_IPv6) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ipv6.addr eq %s and ipv6.addr eq %s) or" " (f5ethtrailer.peeraddr6 eq %s and f5ethtrailer.peeraddr6 eq %s)", src_addr, dst_addr, src_addr, dst_addr); } } return buf; } /* f5_ip_conv_filter() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Calculates the F5 TCP conversation filter based on the current packet. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3/L4 data. * * @return A filter string for the F5 TCP conversation or NULL if no filter can be * computed. The caller should free this string with g_free(). * * Prior to version 11.0.0, the f5ethtrailer.peeripproto field was not populated properly. In * an effort to accurately match the appropriate protocol, the filter adds: * f5ethtrailer.ipproto eq 6 (for the >=11.0.0 case) * or f5ethtrailer.ipproto eq 0 and tcp (for the <11.0.0 case) * This is in an attempt to try to not pick up UDP packets that happen to have the same ports when * you are filtering on a TCP conversation. Note that in the <11.0.0 case, an IP protocol change * across the peer flows (I don't know that I've seen that happen, so it's at least rare) will not * be filtered properly. In the >=11.0.0 case, if you have TCP on one side and UDP on the other * and it should "do the right thing". * * @attention This function uses ws_strdup_printf() rather than the wmem equivalent because the * caller (menu_dissector_filter_cb()) uses g_free to free the filter string. * (as of WS 1.12). */ static gchar * f5_tcp_conv_filter(packet_info *pinfo, void *user_data _U_) { gchar *buf = NULL; gchar src_addr[WS_INET6_ADDRSTRLEN]; gchar dst_addr[WS_INET6_ADDRSTRLEN]; *dst_addr = *src_addr = '\0'; if (pinfo->net_src.type == AT_IPv4 && pinfo->net_dst.type == AT_IPv4) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ip.addr eq %s and ip.addr eq %s and tcp.port eq %d and tcp.port eq %d) or" " (f5ethtrailer.peeraddr eq %s and f5ethtrailer.peeraddr eq %s and" " f5ethtrailer.peerport eq %d and f5ethtrailer.peerport eq %d and" " (f5ethtrailer.peeripproto eq 6 or (f5ethtrailer.peeripproto eq 0 and tcp)))", src_addr, dst_addr, pinfo->srcport, pinfo->destport, src_addr, dst_addr, pinfo->srcport, pinfo->destport); } } else if (pinfo->net_src.type == AT_IPv6 && pinfo->net_dst.type == AT_IPv6) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ipv6.addr eq %s and ipv6.addr eq %s and tcp.port eq %d and tcp.port eq %d) or" " (f5ethtrailer.peeraddr6 eq %s and f5ethtrailer.peeraddr6 eq %s and" " f5ethtrailer.peerport eq %d and f5ethtrailer.peerport eq %d and" " (f5ethtrailer.peeripproto eq 6 or (f5ethtrailer.peeripproto eq 0 and tcp)))", src_addr, dst_addr, pinfo->srcport, pinfo->destport, src_addr, dst_addr, pinfo->srcport, pinfo->destport); } } return buf; } /* f5_tcp_conv_filter() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Calculates the F5 UDP conversation filter based on the current packet. * * @attention This is an interface function to be called from the rest of wireshark. * * @param pinfo A pointer to the packet info to look at for the L3/L4 data. * @return A filter string for the F5 UDP conversation or NULL if no filter can be * computed. The caller should free this string with g_free(). * * Prior to version 11.0.0, the f5ethtrailer.peeripproto field was not populated properly. In * an effort to accurately match the appropriate protocol, the filter adds: * f5ethtrailer.ipproto eq 17 (for the >=11.0.0 case) * or f5ethtrailer.ipproto eq 0 and udp (for the <11.0.0 case) * This is in an attempt to try to not pick up TCP packets that happen to have the same ports when * you are filtering on a UDP conversation. Note that in the <11.0.0 case, an IP protocol change * across the peer flows (I don't know that I've seen that happen, so it's at least rare) will not * be filtered properly. In the >=11.0.0 case, if you have TCP on one side and UDP on the other * and it should "do the right thing". * * @attention This function uses ws_strdup_printf() rather than the wmem equivalent because the * caller (menu_dissector_filter_cb()) uses g_free to free the filter string. * (as of WS 1.12). */ static gchar * f5_udp_conv_filter(packet_info *pinfo, void *user_data _U_) { gchar *buf = NULL; gchar src_addr[WS_INET6_ADDRSTRLEN]; gchar dst_addr[WS_INET6_ADDRSTRLEN]; *dst_addr = *src_addr = '\0'; if (pinfo->net_src.type == AT_IPv4 && pinfo->net_dst.type == AT_IPv4) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ip.addr eq %s and ip.addr eq %s and udp.port eq %d and udp.port eq %d) or" " (f5ethtrailer.peeraddr eq %s and f5ethtrailer.peeraddr eq %s and" " f5ethtrailer.peerport eq %d and f5ethtrailer.peerport eq %d and" " (f5ethtrailer.peeripproto eq 17 or (f5ethtrailer.peeripproto eq 0 and udp)))", src_addr, dst_addr, pinfo->srcport, pinfo->destport, src_addr, dst_addr, pinfo->srcport, pinfo->destport); } } else if (pinfo->net_src.type == AT_IPv6 && pinfo->net_dst.type == AT_IPv6) { address_to_str_buf(&pinfo->src, src_addr, WS_INET6_ADDRSTRLEN); address_to_str_buf(&pinfo->dst, dst_addr, WS_INET6_ADDRSTRLEN); if (*src_addr != '\0' && *dst_addr != '\0') { buf = ws_strdup_printf( "(ipv6.addr eq %s and ipv6.addr eq %s and udp.port eq %d and udp.port eq %d) or" " (f5ethtrailer.peeraddr6 eq %s and f5ethtrailer.peeraddr6 eq %s and" " f5ethtrailer.peerport eq %d and f5ethtrailer.peerport eq %d and" " (f5ethtrailer.peeripproto eq 17 or (f5ethtrailer.peeripproto eq 0 and udp)))", src_addr, dst_addr, pinfo->srcport, pinfo->destport, src_addr, dst_addr, pinfo->srcport, pinfo->destport); } } return buf; } /* f5_udp_conv_filter() */ /* End of Analyze menu functions */ /*===============================================================================================*/ /*===============================================================================================*/ /* Stats tree functions */ static int st_node_tmmpktdist = -1; /**< Tree for packet counts */ static int st_node_tmmbytedist = -1; /**< Tree for byte counts (excludes trailer) */ static const gchar *st_str_tmmdist = "F5" STATS_TREE_MENU_SEPARATOR "tmm Distribution"; static const gchar *st_str_tmmdist_pkts = "tmm Packet Distribution"; static const gchar *st_str_tmmdist_bytes = "tmm Byte Distribution (excludes trailer)"; static const gchar *st_str_tmm_dir_in = "direction in"; static const gchar *st_str_tmm_dir_out = "direction out"; static const gchar *st_str_tmm_flow_virt = "flow with virtual"; static const gchar *st_str_tmm_flow_novirt = "flow without virtual"; static const gchar *st_str_tmm_flow_none = "flow none"; static int st_node_virtpktdist = -1; /**< Tree for packet counts */ static int st_node_virtbytedist = -1; /**< Tree for packet counts (excludes trailer) */ static const gchar *st_str_virtdist = "F5" STATS_TREE_MENU_SEPARATOR "Virtual Server Distribution"; static const gchar *st_str_virtdist_pkts = "Virtual Server Packet Distribution"; static const gchar *st_str_virtdist_bytes = "Virtual Server Byte Distribution (excludes trailer)"; static const gchar *st_str_virtdist_noflow = "No flow"; static const gchar *st_str_virtdist_novirt = "Flow without virtual server name"; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Initializer for tmm distribution statistics * * @attention This is an interface function to be called from the rest of wireshark. * * @param st A pointer to the stats tree to use * */ static void f5eth_tmmdist_stats_tree_init(stats_tree *st) { st_node_tmmpktdist = stats_tree_create_node(st, st_str_tmmdist_pkts, 0, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_tmmdist_pkts, 0, TRUE, ST_FLG_SORT_TOP); st_node_tmmbytedist = stats_tree_create_node(st, st_str_tmmdist_bytes, 0, STAT_DT_INT, TRUE); } /* f5eth_tmmdist_stats_tree_init() */ #define PER_TMM_STAT_NAME_BUF_LEN (sizeof("slot SSS,tmm TTT")) /*-----------------------------------------------------------------------------------------------*/ /** * @brief Per-packet tmm distribution statistics * * @attention This is an interface function to be called from the rest of wireshark. * * @param st A pointer to the stats tree to use * @param pinfo A pointer to the packet info. * @param edt Unused * @param data A pointer to the data provided by the tap * @return TAP_PACKET_REDRAW if the data was actually used to alter * the statistics, TAP_PACKET_DONT_REDRAW otherwise. * */ static tap_packet_status f5eth_tmmdist_stats_tree_packet( stats_tree *st, packet_info *pinfo, epan_dissect_t *edt _U_, const void *data, tap_flags_t flags _U_) { const f5eth_tap_data_t *tdata = (const f5eth_tap_data_t *)data; guint32 pkt_len; int st_node_tot_pkts; int st_node_tot_bytes; int st_node_tmm_pkts; int st_node_tmm_bytes; char tmm_stat_name_buffer[PER_TMM_STAT_NAME_BUF_LEN]; if (tdata == NULL) return TAP_PACKET_DONT_REDRAW; /* Unnecessary since this tap packet function and the F5 Ethernet trailer dissector are both in * the same source file. If you are using this function as an example in a separate tap source * file, you should uncomment this. if(check_f5eth_tap_magic(tdata) == 0) return TAP_PACKET_DONT_REDRAW; */ snprintf(tmm_stat_name_buffer, PER_TMM_STAT_NAME_BUF_LEN, "slot %3d,tmm %3d", tdata->slot, tdata->tmm); pkt_len = pinfo->fd->pkt_len - tdata->trailer_len; st_node_tot_pkts = tick_stat_node(st, st_str_tmmdist_pkts, 0, TRUE); st_node_tot_bytes = increase_stat_node(st, st_str_tmmdist_bytes, 0, TRUE, pkt_len); st_node_tmm_pkts = tick_stat_node(st, tmm_stat_name_buffer, st_node_tot_pkts, TRUE); st_node_tmm_bytes = increase_stat_node(st, tmm_stat_name_buffer, st_node_tot_bytes, TRUE, pkt_len); if (tdata->ingress == 1) { tick_stat_node(st, st_str_tmm_dir_in, st_node_tmm_pkts, FALSE); increase_stat_node(st, st_str_tmm_dir_in, st_node_tmm_bytes, FALSE, pkt_len); /* Create nodes in case we see no egress packets */ increase_stat_node(st, st_str_tmm_dir_out, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_dir_out, st_node_tmm_bytes, FALSE, 0); } else { tick_stat_node(st, st_str_tmm_dir_out, st_node_tmm_pkts, FALSE); increase_stat_node(st, st_str_tmm_dir_out, st_node_tmm_bytes, FALSE, pkt_len); /* Create nodes in case we see no ingress packets */ increase_stat_node(st, st_str_tmm_dir_in, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_dir_in, st_node_tmm_bytes, FALSE, 0); } if (tdata->virtual_name == NULL) { if (tdata->flow == 0) { /* No flow ID and no virtual name */ tick_stat_node(st, st_str_tmm_flow_none, st_node_tmm_pkts, FALSE); increase_stat_node(st, st_str_tmm_flow_none, st_node_tmm_bytes, FALSE, pkt_len); /* Create nodes in case we see no packets without a virtual */ increase_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_bytes, FALSE, 0); } else { /* Flow ID and no virtual name */ tick_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_pkts, FALSE); increase_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_bytes, FALSE, pkt_len); /* Create nodes in case we see no packets with a virtual */ increase_stat_node(st, st_str_tmm_flow_none, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_flow_none, st_node_tmm_bytes, FALSE, 0); } /* Create nodes in case we see no packets with a virtual */ increase_stat_node(st, st_str_tmm_flow_virt, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_flow_virt, st_node_tmm_bytes, FALSE, 0); } else { /* Has a virtual name */ tick_stat_node(st, st_str_tmm_flow_virt, st_node_tmm_pkts, FALSE); increase_stat_node(st, st_str_tmm_flow_virt, st_node_tmm_bytes, FALSE, pkt_len); /* Create nodes in case we see no packets without a virtual */ increase_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_flow_novirt, st_node_tmm_bytes, FALSE, 0); /* Create nodes in case we see no packets without a flow */ increase_stat_node(st, st_str_tmm_flow_none, st_node_tmm_pkts, FALSE, 0); increase_stat_node(st, st_str_tmm_flow_none, st_node_tmm_bytes, FALSE, 0); } return TAP_PACKET_REDRAW; } /* f5eth_tmmdist_stats_tree_packet() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Initialize Virtual Server stats tree * * @param st A pointer to the stats tree to use */ static void f5eth_virtdist_stats_tree_init(stats_tree *st) { st_node_virtpktdist = stats_tree_create_node(st, st_str_virtdist_pkts, 0, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_virtdist_pkts, 0, TRUE, ST_FLG_SORT_TOP); st_node_virtbytedist = stats_tree_create_node(st, st_str_virtdist_bytes, 0, STAT_DT_INT, TRUE); stats_tree_create_node(st, st_str_virtdist_noflow, st_node_virtpktdist, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_virtdist_noflow, st_node_virtpktdist, TRUE, ST_FLG_SORT_TOP); stats_tree_create_node(st, st_str_virtdist_novirt, st_node_virtpktdist, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_virtdist_novirt, st_node_virtpktdist, TRUE, ST_FLG_SORT_TOP); stats_tree_create_node(st, st_str_virtdist_noflow, st_node_virtbytedist, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_virtdist_noflow, st_node_virtbytedist, TRUE, ST_FLG_SORT_TOP); stats_tree_create_node(st, st_str_virtdist_novirt, st_node_virtbytedist, STAT_DT_INT, TRUE); stat_node_set_flags(st, st_str_virtdist_novirt, st_node_virtbytedist, TRUE, ST_FLG_SORT_TOP); } /* f5eth_virtdist_stats_tree_init() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Per-packet Virtual Server distribution statistics * * @param st A pointer to the stats tree to use * @param pinfo A pointer to the packet info. * @param edt Unused * @param data A pointer to the data provided by the tap * @return TAP_PACKET_REDRAW if the data was actually used to alter * the statistics, TAP_PACKET_DONT_REDRAW otherwise. */ static tap_packet_status f5eth_virtdist_stats_tree_packet( stats_tree *st, packet_info *pinfo, epan_dissect_t *edt _U_, const void *data, tap_flags_t flags _U_) { const f5eth_tap_data_t *tdata = (const f5eth_tap_data_t *)data; guint32 pkt_len; if (tdata == NULL) return TAP_PACKET_DONT_REDRAW; /* Unnecessary since this tap packet function and the F5 Ethernet trailer dissector are both in * the same source file. If you are using this function as an example in a separate tap source * file, you should uncomment this. if(check_f5eth_tap_magic(tdata) == 0) return TAP_PACKET_DONT_REDRAW; */ pkt_len = pinfo->fd->pkt_len - tdata->trailer_len; tick_stat_node(st, st_str_virtdist_pkts, 0, TRUE); increase_stat_node(st, st_str_virtdist_bytes, 0, TRUE, pkt_len); /* We could have low noise (with a virtual name) without medium noise (with the flow ID). * That will get treated as a no flow case. */ if (tdata->virtual_name == NULL) { if (tdata->flow == 0) { /* No flow ID */ tick_stat_node(st, st_str_virtdist_noflow, st_node_virtpktdist, TRUE); increase_stat_node(st, st_str_virtdist_noflow, st_node_virtbytedist, TRUE, pkt_len); } else { /* Flow ID without virtual name */ tick_stat_node(st, st_str_virtdist_novirt, st_node_virtpktdist, TRUE); increase_stat_node(st, st_str_virtdist_novirt, st_node_virtbytedist, TRUE, pkt_len); } } else { /* Has virtual name */ tick_stat_node(st, tdata->virtual_name, st_node_virtpktdist, TRUE); increase_stat_node(st, tdata->virtual_name, st_node_virtbytedist, TRUE, pkt_len); } return TAP_PACKET_REDRAW; } /* f5eth_virtdist_stats_tree_packet() */ /* End of statistics gathering */ /*===============================================================================================*/ /*===============================================================================================*/ /* Info column display handling. * * Format Specifiers: * in/out are separate formats so that no printf formatting is required for these two common * alternatives. * There are two sets of six format strings. One set corresponding to "full" or long output * ("long" is not used due to conflict with C keyword) and the other set corresponding to * "brief" output. * Full: * in/out only; one for in, one for out: * info_format_full_in_only, info_format_full_out_only * in/out, slot and tmm; one for in and one for out: * info_format_full_in_slot, info_format_full_out_slot * in/out and tmm (no slot information); one for in and one for out: * info_format_full_in_noslot, info_format_full_out_noslot * Brief: * in/out only; one for in, one for out: * info_format_brief_in_only, info_format_brief_out_only * in/out, slot and tmm; one for in and one for out: * info_format_brief_in_slot, info_format_brief_out_slot * in/out and tmm (no slot information); one for in and one for out: * info_format_brief_in_noslot, info_format_brief_out_noslot * The set of format specifiers in use are chosen based on whether brief is chosen and the * following variables are set accordingly: * info_format_in_only, info_format_out_only (should have no format specifiers) * info_format_in_slot, info_format_out_slot (should have two format specifiers) * info_format_in_noslot, info_format_out_noslot (should have one format specifier) * * Functions: * Separate functions depending on the amount of information desired. The decision is made once * when the preference is set and a function pointer is used to call the appropriate one: * f5eth_set_info_col_inout(): In/out only. * f5eth_set_info_col_slot(): in/out, slot and tmm. * f5eth_set_info_col_noslot(): in/out and tmm (no slot information). * f5eth_set_info_col is the function pointer to the function currently in use. */ /** Info column display format formats */ static const char info_format_full_in_only[] = "IN : "; static const char info_format_full_out_only[] = "OUT: "; static const char info_format_full_in_slot[] = "IN s%u/tmm%-2u: "; static const char info_format_full_out_slot[] = "OUT s%u/tmm%-2u: "; static const char info_format_full_in_noslot[] = "IN tmm%-2u: "; static const char info_format_full_out_noslot[] = "OUT tmm%-2u: "; /* Variables used in f5eth_set_info_col functions initialized to defaults */ static char *info_format_in_only = NULL; /**< In format in use with in/out only */ static char *info_format_out_only = NULL; /**< Out format in use with in/out only */ static char *info_format_in_noslot = NULL; /**< In format in use without slot */ static char *info_format_out_noslot = NULL; /**< Out format in use without slot */ static char *info_format_in_slot = NULL; /**< In format in use with slot */ static char *info_format_out_slot = NULL; /**< Out format in use with slot */ /** Info column display format preference types: * These correspond to bit flags * Display on = 0x0001 * In out only = 0x0002 * Brief = 0x0004 */ typedef enum { none = 0, full = 1, in_out_only = 3, brief = 5, brief_in_out_only = 7 } f5eth_info_type_t; /** Info column display format type strings */ static const enum_val_t f5eth_display_strings[] = { {"None", "None", 0}, {"Full", "Full", 1}, {"InOutOnly", "In/out only", 3}, {"Brief", "Brief", 5}, {"BriefInOutOnly", "Brief in/out only", 7}, {NULL, NULL, 0} }; /** Info column display preference (default to full) */ static f5eth_info_type_t pref_info_type = full; /** Preference for the brief in/out characters */ static const char *pref_brief_inout_chars = NULL; /** Function pointer prototype for info column set functions */ typedef void (*f5eth_set_col_info_func)(packet_info *, guint, guint, guint); /** Preference for setting platform regex for which platforms to display slot information for. */ static const char *pref_slots_regex = NULL; /** Whether or not to display slot information, set based on platform and regex preference. */ static gboolean display_slot = TRUE; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Adds full format (in/out, slot, tmm) to info column * * @param pinfo A pointer to the packet info structure. * @param ingress zero for egress, non-zero for ingress. * @param slot The slot number handling the packet * @param tmm The tmm handling the packet */ static void f5eth_set_info_col_slot(packet_info *pinfo, guint ingress, guint slot, guint tmm) { gboolean col_writable; /* * HTTP and other protocols set writable to false to protect * their data. We don't care. */ col_writable = col_get_writable(pinfo->cinfo, COL_INFO); col_set_writable(pinfo->cinfo, COL_INFO, TRUE); if (ingress != 0) { DISSECTOR_ASSERT(info_format_in_slot); col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, info_format_in_slot, slot, tmm); } else { DISSECTOR_ASSERT(info_format_out_slot); col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, info_format_out_slot, slot, tmm); } /* Reset writable to whatever it was before we got here. */ col_set_writable(pinfo->cinfo, COL_INFO, col_writable); } /* f5eth_set_info_col_slot() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Adds format without slot (in/out, tmm) to info column * * @param pinfo A pointer to the packet info structure. * @param ingress zero for egress, non-zero for ingress. * @param slot The slot number handling the packet (unused) * @param tmm The tmm handling the packet */ static void f5eth_set_info_col_noslot(packet_info *pinfo, guint ingress, guint slot _U_, guint tmm) { gboolean col_writable; /* * HTTP and other protocols set writable to false to protect * their data. We don't care. */ col_writable = col_get_writable(pinfo->cinfo, COL_INFO); col_set_writable(pinfo->cinfo, COL_INFO, TRUE); if (ingress != 0) { col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, info_format_in_noslot, tmm); } else { col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, info_format_out_noslot, tmm); } /* Reset writable to whatever it was before we got here. */ col_set_writable(pinfo->cinfo, COL_INFO, col_writable); } /* f5eth_set_info_col_noslot() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Adds format with only direction (in/out) to info column * * @param pinfo A pointer to the packet info structure. * @param ingress zero for egress, non-zero for ingress. * @param slot The slot number handling the packet (unused) * @param tmm The tmm handling the packet (unused) */ static void f5eth_set_info_col_inout(packet_info *pinfo, guint ingress, guint slot _U_, guint tmm _U_) { gboolean col_writable; /* * HTTP and other protocols set writable to false to protect * their data. We don't care. */ col_writable = col_get_writable(pinfo->cinfo, COL_INFO); col_set_writable(pinfo->cinfo, COL_INFO, TRUE); if (ingress != 0) { col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, "%s", info_format_in_only); } else { col_prepend_fence_fstr(pinfo->cinfo, COL_INFO, "%s", info_format_out_only); } /* Reset writable to whatever it was before we got here. */ col_set_writable(pinfo->cinfo, COL_INFO, col_writable); } /* f5eth_set_info_col_inout() */ /** The column display function. Will really be set in proto_reg_handoff_f5fileinfo() */ static f5eth_set_col_info_func f5eth_set_info_col = f5eth_set_info_col_slot; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Called out of f5info processing to determine platform display information * * @param platform String representing the platform name (can be NULL, will not be referenced * after the function returns.) */ static void f5eth_process_f5info(const guint8 *platform) { /** Always display slot information when there is no platform information in the header or * if there was no regex specified in the preference. But use the in/out only * function if that is specified in the preference.*/ if (platform == NULL || platform[0] == '\0' || pref_slots_regex == NULL || pref_slots_regex[0] == '\0') { display_slot = TRUE; if (pref_info_type == in_out_only || pref_info_type == brief_in_out_only) { f5eth_set_info_col = f5eth_set_info_col_inout; } else { f5eth_set_info_col = f5eth_set_info_col_slot; } return; } /** If the string matches the regex */ if (g_regex_match_simple(pref_slots_regex, platform, G_REGEX_RAW, (GRegexMatchFlags)0) == TRUE) { /** Then display the slot information (only if in/out only is not selected). */ display_slot = TRUE; if (pref_info_type == in_out_only || pref_info_type == brief_in_out_only) { f5eth_set_info_col = f5eth_set_info_col_inout; } else { f5eth_set_info_col = f5eth_set_info_col_slot; } } else { /** Else do not display the slot information (only if in/out only is not selected). */ display_slot = FALSE; if (pref_info_type == in_out_only || pref_info_type == brief_in_out_only) { f5eth_set_info_col = f5eth_set_info_col_inout; } else { f5eth_set_info_col = f5eth_set_info_col_noslot; } } } /* f5eth_process_f5info() */ /* End of info column display handling. */ /*===============================================================================================*/ /** Magic information for the fileinfo packet that might appear at the beginning of a capture. */ static const guint8 fileinfomagic1[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x05, 0xff, 'F', '5', '-', 'P', 's', 'e', 'u', 'd', 'o', '-', 'p', 'k', 't', 0 }; #define F5_OFF_TYPE 0 #define F5_OFF_LENGTH 1 #define F5_OFF_VERSION 2 #define F5_OFF_VALUE 3 /** This is used only for old format trailers. The highest version number is 3 for medium trailers. */ #define F5TRAILER_VER_MAX 3 #define F5TYPE_LOW 1 #define F5TYPE_MED 2 #define F5TYPE_HIGH 3 /* These are to perform a sanity check to try to avoid rendering true garbage * in packets. So, in addition to matching one of the types, the len of the * suspected trailer needs to fall into this range. * * Max length seems to be 42 on high detail. * Max length with RST cause in medium(v1) is 30 + 8 + 1 + 96 (might be 30+96)? * Max length with RST cause in medium(v2) is 31 + 8 + 1 + 96 (might be 31+96)? * Max length with RST cause in medium(v3) is 35 + 8 + 1 + 96 (might be 35+96)? * Min length is 8 on v9.4 medium detail. * Min length is 7 on v11.2 low trailer with no VIP name. * * These are only used for old format trailers. */ #define F5_MIN_SANE 7 #define F5_MAX_SANE 140 #define F5_LOW_FLAGS_INGRESS_MASK 0x01 #define F5_LOW_FLAGS_HWACTION_MASK 0x06 #define F5_HIV0_LEN 42 /* Old format trailers */ #define F5_MEDV94_LEN 8 #define F5_MEDV10_LEN 21 #define F5_MEDV11_LEN 29 #define F5_MEDV1_LENMIN 30 #define F5_MEDV2_LENMIN 31 #define F5_MEDV3_LENMIN 35 #define F5_LOWV94_LEN 35 #define F5_LOWV10_LEN 22 #define F5_OFF_LOW_ING 3 #define F5_OFF_LOW_SLOT 4 #define F5_OFF_LOW_TMM 5 #define VIP_NAME_LEN 16 #define F5_LOWV1_LENMIN 7 /* New format (DPT) trailers */ #define F5_MEDV4_LENMIN 32 /**< Minimum length without TLV header */ #define F5_DPT_V1_HDR_MAGIC_OFF 0 #define F5_DPT_V1_HDR_MAGIC_LEN 4 #define F5_DPT_V1_HDR_MAGIC 0xf5deb0f5 #define F5_DPT_V1_HDR_LENGTH_OFF (F5_DPT_V1_HDR_MAGIC_OFF + F5_DPT_V1_HDR_MAGIC_LEN) #define F5_DPT_V1_HDR_LENGTH_LEN 2 #define F5_DPT_V1_HDR_VERSION_OFF (F5_DPT_V1_HDR_LENGTH_OFF + F5_DPT_V1_HDR_LENGTH_LEN) #define F5_DPT_V1_HDR_VERSION_LEN 2 #define F5_DPT_V1_HDR_VERSION_MIN 1 /**< Minimum DPT version handled by this dissector. */ #define F5_DPT_V1_HDR_VERSION_MAX 1 /**< Maximum DPT version handled by this dissector. */ #define F5_DPT_V1_HDR_LEN (F5_DPT_V1_HDR_VERSION_OFF + F5_DPT_V1_HDR_VERSION_LEN) #define F5_DPT_PROVIDER_NOISE 1 #define F5_DPT_V1_TLV_PROVIDER_OFF 0 #define F5_DPT_V1_TLV_PROVIDER_LEN 2 #define F5_DPT_V1_TLV_TYPE_OFF (F5_DPT_V1_TLV_PROVIDER_OFF + F5_DPT_V1_TLV_PROVIDER_LEN) #define F5_DPT_V1_TLV_TYPE_LEN 2 #define F5_DPT_V1_TLV_LENGTH_OFF (F5_DPT_V1_TLV_TYPE_OFF + F5_DPT_V1_TLV_TYPE_LEN) #define F5_DPT_V1_TLV_LENGTH_LEN 2 #define F5_DPT_V1_TLV_VERSION_OFF (F5_DPT_V1_TLV_LENGTH_OFF + F5_DPT_V1_TLV_LENGTH_LEN) #define F5_DPT_V1_TLV_VERSION_LEN 2 #define F5_DPT_V1_TLV_HDR_LEN (F5_DPT_V1_TLV_VERSION_OFF+F5_DPT_V1_TLV_VERSION_LEN) /*===============================================================================================*/ /* This section is for performing analysis of the trailer information. */ /** Analysis Overview: * * The analysis in this dissector is meant to correlate data in the F5 Ethernet trailer with other * data in the frame (e.g. IP, TCP) and highlight things that don't look right. They might be * perfectly valid, but in most cases, they are not. * * How it works: * * When analysis is enabled, the dissector ties protocol data to each packet. The dissector * populates some useful data it needs to perform analysis into the protocol data. It also * registers taps on IP, IPv6 and TCP to populate data from those headers into the stored protocol * data. * * All of that information is then used to look for certain, common anomalies. * * It uses taps rather than surfing the WS protocol tree because: * 1. I suspect that surfing the protocol tree is rather expensive. * 2. We need to try to find the outer-most headers and use those. The taps should fire in * order so that should get what is needed. When searching the tree, it's difficult to * know if, for example, the TCP header we are on is tied to the outer IP header or to * the IP header that's inside and ICMP inside an IP. * * Challenges: * * 1. Taps run after all dissectors run on a packet. As a result, when the trailer dissector is * running, it does not have the data from the other protocols to perform the analysis. * 2. The Ethernet dissector does not call trailer dissectors if it is not building a tree. * * Flow: * * In the trailer dissector, if ip_visited is set and analysis done is not set, then analysis * is performed. * * In the tcp tap, if analysis_done is not set and pkt_ingress is not unknown (meaning that the * trailer dissector had an opportunity to run on this packet), then analysis is performed. Also * in this case, we attempt to attach the expert info to a top-level tree element for the * F5 Ethernet trailer. * * The purpose of the analysis in the dissector is for first-pass misses of the dissector. For * example, on initial file load, if the Ethernet dissector does not call the trailer dissector * then analysis cannot be performed by the tcp tap because the data from the trailer is not * available. In order to get the analysis on the second pass, we run here. * * The purpose of the analysis and rendering in the tcp tap is to handle one-pass situations * (e.g. tshark). In one-pass situations, after the tcp tap is called, the trailer dissector * will not run again to have an opportunity to perform and render analysis. */ #define IP_MF 0x2000 /** IP more fragments flag */ #define IP_OFFSET_WIDTH 13 /** Size of fragment offset field */ #define IP_OFFSET_MASK ((1 << IP_OFFSET_WIDTH) - 1) /** Structure used to store data gathered by the taps and dissector that is attached to the pinfo * structure for the packet. This structure ends up getting allocated for every packet. So, we * want to keep it small. * * For fields that are 1 bit wide, they have 0 == false and 1 == true. * For fields that are 2 bits wide, they have 0 == false, 1 == true and 3 == unknown. */ struct f5eth_analysis_data_t { guint8 ip_visited : 1; /**< Did the IPv4 or IPv6 tap look at this packet already? */ guint8 tcp_visited : 1; /**< Did the TCP tap look at this packet already? */ guint8 ip_istcp : 2; /**< Is this a TCP (set by ip/ip6 tap on first header) */ guint8 ip_isfrag : 2; /**< Is this packet an IP fragment? */ guint8 tcp_synset : 2; /**< Is the SYN flag set in the TCP header? */ guint8 tcp_ackset : 2; /**< Is the ACK flag set in the TCP header? */ guint8 pkt_ingress : 2; /**< Packet is ingress packet */ guint8 pkt_has_flow : 2; /**< Packet has associated flow */ guint8 pkt_has_peer : 2; /**< Packet has associated peer flow */ guint8 analysis_done : 1; /**< Analysis has been performed */ guint8 analysis_flowreuse : 1; /**< Analysis indicates flow reuse */ guint8 analysis_flowlost : 1; /**< Analysis indicates flow lost */ guint8 analysis_hasresults : 1; /**< Are there actually any results? */ }; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Allocates a new analysis data structure and initializes the values. * * @return wmem allocated analysis structure */ static struct f5eth_analysis_data_t * new_f5eth_analysis_data_t(void) { struct f5eth_analysis_data_t *r = wmem_new0(wmem_file_scope(), struct f5eth_analysis_data_t); /* r->ip_visited = 0; */ /* r->tcp_visited = 0; */ r->ip_istcp = 3; r->tcp_synset = 3; r->tcp_ackset = 3; r->ip_isfrag = 3; r->pkt_ingress = 3; r->pkt_has_flow = 3; r->pkt_has_peer = 3; /* r->analysis_done = 0; */ /* r->analysis_flowreuse = 0; */ /* r->analysis_flowlost = 0; */ /* r->analysis_hasresults = 0; */ return r; } /* new_f5eth_analysis_data_t() */ /* Functions for find a subtree of a particular type of the current tree. */ /** Structure used as the anonymous data in the proto_tree_children_foreach() function */ struct subtree_search { proto_tree *tree; /**< The matching tree that we found */ gint hf; /**< The type of tree that we are looking for. */ }; /*-----------------------------------------------------------------------------------------------*/ /** * @brief Function to see if a node is of a particular type and return it if it is a tree. * * @param pn A pointer to the proto_node being looked at. * @param data A pointer to the subtree_search structure with search criteria and results. */ static void compare_subtree(proto_node *pn, gpointer data) { struct subtree_search *search_struct; search_struct = (struct subtree_search *)data; if (pn && pn->finfo && pn->finfo->hfinfo && pn->finfo->hfinfo->id == search_struct->hf) { search_struct->tree = proto_item_get_subtree(pn); } } /* compare_subtree() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Function to search child trees (one level) for a tree of a specific type. * * @param tree A pointer to the proto_tree being looked at. * @param hf The register hfinfo id that we are looking for. * @return The tree that was found or NULL if it was not found. */ static proto_tree * find_subtree(proto_tree *tree, gint hf) { struct subtree_search search_struct; if (tree == NULL || hf == -1) return NULL; search_struct.tree = NULL; search_struct.hf = hf; proto_tree_children_foreach(tree, compare_subtree, &search_struct); return search_struct.tree; } /* find_subtree() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Computes the analysis results based on the data in the analysis data struct. * * @param ad A pointer to the f5eth_analysis_data_t struct */ static void perform_analysis(struct f5eth_analysis_data_t *ad) { /** Tests that apply to ingress TCP non-frags */ if (ad->pkt_ingress == 1 && ad->ip_istcp == 1 && ad->tcp_visited == 1 && ad->ip_isfrag == 0) { /** If this is an inbound SYN and there is a flow ID, we might have a problem. */ if (ad->tcp_synset == 1 && ad->tcp_ackset == 0 && ad->pkt_has_flow == 1) { ad->analysis_flowreuse = 1; ad->analysis_hasresults = 1; } /** If this is an inbound packet with the ACK flag set and there is no flow, we might have * a problem. */ if (ad->tcp_ackset == 1 && ad->pkt_has_flow == 0) { ad->analysis_flowlost = 1; ad->analysis_hasresults = 1; } } ad->analysis_done = 1; } /* perform_analysis() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Puts the results of the F5 Ethernet trailer analysis into the protocol tree. * * @param tvb A pointer to a TV buffer for the packet. * @param pinfo A pointer to the packet info struction for the packet * @param tree A pointer to the protocol tree structure * @param ad A pointer to the intra-noise information data */ static void render_analysis( tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, const struct f5eth_analysis_data_t *ad) { proto_item *pi; if (ad == NULL || ad->analysis_hasresults == 0) return; pi = proto_tree_add_item(tree, hf_analysis, tvb, 0, 0, ENC_NA); proto_item_set_generated(pi); if (ad->analysis_flowreuse) { expert_add_info(pinfo, pi, &ei_f5eth_flowreuse); } if (ad->analysis_flowlost) { expert_add_info(pinfo, pi, &ei_f5eth_flowlost); } } /* render_analysis() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Tap call back to retrieve information about the IP headers. * * @param tapdata UNUSED * @param pinfo Pointer to acket Info data structure * @param edt UNUSED * @param data Pointer to ws_ip4 structure * @return tap_packet_status */ static tap_packet_status ip_tap_pkt(void *tapdata _U_, packet_info *pinfo, epan_dissect_t *edt _U_, const void *data, tap_flags_t flags _U_) { struct f5eth_analysis_data_t *ad; const ws_ip4 *iph; ad = (struct f5eth_analysis_data_t *)p_get_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer, 0); if (ad == NULL) return TAP_PACKET_DONT_REDRAW; /* No F5 information */ if (ad->ip_visited == 1) return TAP_PACKET_DONT_REDRAW; ad->ip_visited = 1; if (data == NULL) return TAP_PACKET_DONT_REDRAW; iph = (const ws_ip4 *)data; /* Only care about TCP at this time */ /* We wait until here to make this check so that if TCP in encapsulated in something else, we * don't work on the encapsulated header. So, we only want to work on TCP if it associated * with the first IP header (not if it's embedded in an ICMP datagram or some sort of tunnel). */ if (iph->ip_proto != IP_PROTO_TCP) { ad->ip_istcp = 0; return TAP_PACKET_DONT_REDRAW; } ad->ip_istcp = 1; ad->ip_isfrag = ((iph->ip_off & IP_OFFSET_MASK) || (iph->ip_off & IP_MF)) ? 1 : 0; return TAP_PACKET_REDRAW; } /* ip_tap_pkt() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Tap call back to retrieve information about the IPv6 headers. * * @param tapdata UNUSED * @param pinfo Pointer to acket Info data structure * @param edt UNUSED * @param data Pointer to ws_ip6_hdr structure * @return tap_packet_status */ static tap_packet_status ipv6_tap_pkt(void *tapdata _U_, packet_info *pinfo, epan_dissect_t *edt _U_, const void *data, tap_flags_t flags _U_) { struct f5eth_analysis_data_t *ad; const struct ws_ip6_hdr *ipv6h; ad = (struct f5eth_analysis_data_t *)p_get_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer, 0); if (ad == NULL) return TAP_PACKET_DONT_REDRAW; /* No F5 information */ if (ad->ip_visited == 1) return TAP_PACKET_DONT_REDRAW; ad->ip_visited = 1; if (data == NULL) return TAP_PACKET_DONT_REDRAW; ipv6h = (const struct ws_ip6_hdr *)data; /* Only care about TCP at this time */ /* We wait until here to make this check so that if TCP in encapsulated in something else, we * don't work on the encapsulated header. So, we only want to work on TCP if it associated * with the first IP header (not if it's embedded in an ICMP datagram or some sort of tunnel. */ /* Note that this only works if TCP is the first next header. If there are other IPv6 headers, * we will not see the fact that it is TCP (limitation of IPv6 tap). This becomes a problem if * there are hop_by_hop or routing headers or other (non-fragment) IPv6 headers. If it's a * fragment, we don't care anyways (too much effort). */ if (ipv6h->ip6h_nxt != IP_PROTO_TCP) { ad->ip_istcp = 0; return TAP_PACKET_DONT_REDRAW; } ad->ip_istcp = 1; return TAP_PACKET_REDRAW; } /* ipv6_tap_pkt() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Tap call back to retrieve information about the TCP headers. * * @param tapdata UNUSED * @param pinfo Pointer to acket Info data structure * @param edt UNUSED * @param data Pointer to tcp_info_t structure * @return tap_packet_status */ static tap_packet_status tcp_tap_pkt(void *tapdata _U_, packet_info *pinfo, epan_dissect_t *edt _U_, const void *data, tap_flags_t flags _U_) { struct f5eth_analysis_data_t *ad; const tcp_info_t *tcph; ad = (struct f5eth_analysis_data_t *)p_get_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer, 0); if (ad == NULL) return TAP_PACKET_DONT_REDRAW; /* No F5 information */ if (ad->tcp_visited == 1) return TAP_PACKET_DONT_REDRAW; ad->tcp_visited = 1; if (data == NULL) return TAP_PACKET_DONT_REDRAW; tcph = (const tcp_info_t *)data; ad->tcp_synset = (tcph->th_flags & TH_SYN) ? 1 : 0; ad->tcp_ackset = (tcph->th_flags & TH_ACK) ? 1 : 0; /** Only do this if the trailer dissector ran. */ if (ad->pkt_ingress != 3 && ad->analysis_done == 0) { perform_analysis(ad); /** If there were results from the analysis, go find the tree and try to insert them. */ if (ad->analysis_hasresults == 1) { proto_tree *tree; /** This was the first opportunity to run, so add anything necessary to the tree. */ /* If we don't find a tree, we could theoretically anchor it to the top-tree. However, * this situation should not happen since, if we know the ingress property, then the * trailer dissector ran and probably created a subtree, so it should most always be * there. If it is not there, it could be because there is nothing of interest to a * filter in the f5ethtrailer protocol, so it didn't create a tree (so probably don't * want to blindly tie this to the top-tree). Other causes would warrant further * investigation as to why it couldn't be found. */ if ((tree = find_subtree(edt->tree, proto_f5ethtrailer)) != NULL) render_analysis(edt->tvb, pinfo, tree, ad); } } return TAP_PACKET_REDRAW; } /* tcp_tap_pkt() */ /* End of analysis functions */ /*===============================================================================================*/ /* Used to determine if an address is an IPv4 address represented as an IPv6 * address. */ static const guint8 ipv4as6prefix[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0xff, 0xff}; static const guint8 f5rtdomprefix[] = {0x26, 0x20, 0, 0, 0x0c, 0x10, 0xf5, 0x01, 0, 0}; #define F5_IPV6ADDR_LEN 16 /*---------------------------------------------------------------------------*/ /** * @brief Display an IPv6 encoded IPv4 addr in an IPv4 field if appropriate. * * @param tree Pointer to tree struct * @param addrfield hf_index address will be placed in * @param rtdomfield hf_index route doamin will be placed in * @param tvb Pointer to tvb * @param offset Offset into the tvb containg the IPv6 address * @param hidden Should the protocol item be hidden * @return Pointer to proto_item created */ static proto_item * displayIPv6as4( proto_tree *tree, int addrfield, int rtdomfield, tvbuff_t *tvb, int offset, gboolean hidden) { proto_item *pi = NULL; if (tvb_memeql(tvb, offset, ipv4as6prefix, sizeof(ipv4as6prefix)) == 0) { if (addrfield >= 0) { pi = proto_tree_add_item( tree, addrfield, tvb, offset + (int)sizeof(ipv4as6prefix), 4, ENC_BIG_ENDIAN); if (hidden) proto_item_set_hidden(pi); } } else if (tvb_memeql(tvb, offset, f5rtdomprefix, sizeof(f5rtdomprefix)) == 0) { /* Route domain information may show up here if the traffic is between tmm and the BIG-IP * host (e.g. monitor traffic). If so, break it up and render it for ease of viewing (and * searching). Ignore the incorrect addresses used by 10.0.x (solution 10511) as these * will hopefully not be common. */ /* TODO: review - These are technically backwards as we are probably returning the wrong pi. However, * when configuring, people usually see route domain after the address, so that is why this * particular ordering is used (and none of the callers currently use the return value). */ if (addrfield >= 0) { pi = proto_tree_add_item( tree, addrfield, tvb, offset + (int)sizeof(f5rtdomprefix) + 2, 4, ENC_BIG_ENDIAN); if (hidden) proto_item_set_hidden(pi); } if (rtdomfield >= 0) { pi = proto_tree_add_item( tree, rtdomfield, tvb, offset + (int)sizeof(f5rtdomprefix), 2, ENC_BIG_ENDIAN); if (hidden) proto_item_set_hidden(pi); } } return pi; } /* displayIPv6as4() */ /** * @brief Render a tree item to dispalay header info for old format trailer blocks * * @attention The old format trailers used a fair amount of magic numbers. Continuing that use for now with the same magic numbers in this function * * @param tvb Pointer to the tvb * @param tree Pointer to tree struct * @param offset Offset into the tvb * @return Number of bytes consumed */ static gint render_f5_legacy_hdr(tvbuff_t *tvb, proto_tree *tree, gint offset) { proto_item *pi = NULL; guint32 trailer_type; pi = proto_tree_add_item(tree, hf_trailer_hdr, tvb, offset, 3, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_trailer_hdr); proto_tree_add_item_ret_uint(tree, hf_type, tvb, offset, 1, ENC_BIG_ENDIAN, &trailer_type); offset += 1; proto_item_append_text(pi, ", Type: %u", trailer_type); proto_tree_add_item(tree, hf_length, tvb, offset, 1, ENC_BIG_ENDIAN); offset += 1; proto_tree_add_item(tree, hf_version, tvb, offset, 1, ENC_BIG_ENDIAN); /* offset += 1; */ return 3; } /* render_f5_legacy_hdr() */ /*---------------------------------------------------------------------------*/ /** * @brief Dissect old format "high" trailer TLV * * @param tvb Pointer to the tvb to be processed * @param pinfo Pointer to packet_info struct * @param tree Pointer to protocol tree * @param offset Offset into the tvb where trailer begins * @param trailer_length Length of the trailer data to process * @param trailer_ver Version of the trailer detected * @param tdata Pointer to tap data structure * @return Number of btyes consumed */ static guint dissect_high_trailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, guint offset, guint8 trailer_length, guint8 trailer_ver, f5eth_tap_data_t *tdata) { proto_item *pi = NULL; guint o; guint8 ipproto; if (trailer_ver != 0 || trailer_length != F5_HIV0_LEN) return 0; /* We do not need to do anything if we don't have a tree */ if (tree == NULL) return trailer_length; o = offset; o += render_f5_legacy_hdr(tvb, tree, o); if (tdata->peer_flow == 0) { proto_tree_add_item(tree, hf_peer_nopeer, tvb, o, trailer_length - 3, ENC_NA); return trailer_length; } /* Add in the high order structures. */ ipproto = tvb_get_guint8(tvb, o); proto_tree_add_item(tree, hf_peer_ipproto, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; proto_tree_add_item(tree, hf_peer_vlan, tvb, o, 2, ENC_BIG_ENDIAN); o += 2; /* peer remote address */ if (pref_pop_other_fields) { displayIPv6as4(tree, hf_ip_ipaddr, -1, tvb, o, TRUE); pi = proto_tree_add_item(tree, hf_ip6_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); } displayIPv6as4(tree, hf_peer_remote_addr, hf_peer_remote_rtdom, tvb, o, FALSE); displayIPv6as4(tree, hf_peer_ipaddr, hf_peer_rtdom, tvb, o, TRUE); proto_tree_add_item(tree, hf_peer_remote_ip6addr, tvb, o, 16, ENC_NA); pi = proto_tree_add_item(tree, hf_peer_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); o += 16; /* peer local address */ if (pref_pop_other_fields) { displayIPv6as4(tree, hf_ip_ipaddr, -1, tvb, o, TRUE); pi = proto_tree_add_item(tree, hf_ip6_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); } displayIPv6as4(tree, hf_peer_local_addr, hf_peer_local_rtdom, tvb, o, FALSE); displayIPv6as4(tree, hf_peer_ipaddr, hf_peer_rtdom, tvb, o, TRUE); proto_tree_add_item(tree, hf_peer_local_ip6addr, tvb, o, 16, ENC_NA); pi = proto_tree_add_item(tree, hf_peer_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); o += 16; if (pref_pop_other_fields) { /* If there is no proto in the trailer, go get it from the actual packet * information. */ if (ipproto == 0) { ipproto = ptype_to_ipproto(pinfo->ptype); } /* peer remote port */ switch (ipproto) { case IP_PROTO_TCP: pi = proto_tree_add_item(tree, hf_tcp_tcpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; case IP_PROTO_UDP: pi = proto_tree_add_item(tree, hf_udp_udpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; } } proto_tree_add_item(tree, hf_peer_remote_port, tvb, o, 2, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_peer_port, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 2; /* peer remote port */ if (pref_pop_other_fields) { switch (ipproto) { case IP_PROTO_TCP: pi = proto_tree_add_item(tree, hf_tcp_tcpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; case IP_PROTO_UDP: pi = proto_tree_add_item(tree, hf_udp_udpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; } } proto_tree_add_item(tree, hf_peer_local_port, tvb, o, 2, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_peer_port, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); return trailer_length; } /* dissect_high_trailer() */ /*---------------------------------------------------------------------------*/ /** * @brief Dissect old format "medium" trailer TLV * * @param tvb Pointer to the tvb to be processed * @param pinfo Pointer to packet_info struct * @param tree Pointer to protocol tree * @param offset Offset into the tvb where trailer begins * @param trailer_length Length of the trailer data to process * @param trailer_ver Version of the trailer detected * @param tdata Pointer to tap data structure * @return Number of btyes consumed */ static guint dissect_med_trailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, guint offset, guint8 trailer_length, guint8 trailer_ver, f5eth_tap_data_t *tdata) { proto_item *pi = NULL; guint o; guint rstcauselen = 0; guint rstcausever = 0xff; switch (trailer_ver) { case 0: if (trailer_length != F5_MEDV11_LEN && trailer_length != F5_MEDV10_LEN && trailer_length != F5_MEDV94_LEN) { return 0; } break; case 1: if (trailer_length < F5_MEDV1_LENMIN) { /* too small */ return 0; } rstcauselen = tvb_get_guint8(tvb, offset + F5_MEDV1_LENMIN - 1); /* check size is valid */ if (rstcauselen + F5_MEDV1_LENMIN != trailer_length) { return 0; } if (rstcauselen) rstcausever = (tvb_get_guint8(tvb, offset + F5_MEDV1_LENMIN) & 0xfe) >> 1; /* If we want the RST cause in the summary, we need to do it here, * before the tree check below */ if (rstcauselen && rstcause_in_info) { if (rstcausever == 0x00) { col_append_sep_fstr(pinfo->cinfo, COL_INFO, " ", "[F5RST%s: %s]", tvb_get_guint8(tvb, offset + F5_MEDV1_LENMIN) & 0x01 ? "(peer)" : "", tvb_get_string_enc(pinfo->pool, tvb, offset + F5_MEDV1_LENMIN + 9, rstcauselen - 9, ENC_ASCII)); } } break; case 2: if (trailer_length < F5_MEDV2_LENMIN) { /* too small */ return 0; } rstcauselen = tvb_get_guint8(tvb, offset + F5_MEDV2_LENMIN - 1); /* check size is valid */ if (rstcauselen + F5_MEDV2_LENMIN != trailer_length) { return 0; } if (rstcauselen) rstcausever = (tvb_get_guint8(tvb, offset + F5_MEDV2_LENMIN) & 0x0fe) >> 1; /* If we want the RST cause in the summary, we need to do it here, * before the tree check below */ if (rstcauselen && rstcause_in_info) { if (rstcausever == 0x00) { col_append_sep_fstr(pinfo->cinfo, COL_INFO, " ", "[F5RST%s: %s]", tvb_get_guint8(tvb, offset + F5_MEDV2_LENMIN) & 0x01 ? "(peer)" : "", tvb_get_string_enc(pinfo->pool, tvb, offset + F5_MEDV2_LENMIN + 9, rstcauselen - 9, ENC_ASCII)); } } break; case 3: if (trailer_length < F5_MEDV3_LENMIN) { /* too small */ return 0; } rstcauselen = tvb_get_gint8(tvb, offset + F5_MEDV3_LENMIN -1); /* check size is valid */ if (rstcauselen + F5_MEDV3_LENMIN != trailer_length) { return 0; } if (rstcauselen) rstcausever = (tvb_get_gint8(tvb, offset + F5_MEDV3_LENMIN) & 0xfe) >>1; /* If we want the RST cause in the summary, we need to do it here, * before the tree check below */ if (rstcauselen && rstcause_in_info) { if (rstcausever == 0x00) { col_append_sep_fstr(pinfo->cinfo, COL_INFO, " ", "[F5RST%s: %s]", tvb_get_gint8(tvb, offset + F5_MEDV3_LENMIN) & 0x01 ? "(peer)" : "", tvb_get_string_enc(pinfo->pool, tvb, offset + F5_MEDV3_LENMIN + 9, rstcauselen - 9, ENC_ASCII)); } } break; default: return 0; } /* We do not need to do anything more if we don't have a tree and we are not performing * analysis */ if (pref_perform_analysis == FALSE && tree == NULL) return trailer_length; o = offset; o += render_f5_legacy_hdr(tvb, tree, o); /* After 9.4, flow IDs and flags and type are here in medium */ if (trailer_length != F5_MEDV94_LEN || trailer_ver > 0) { if (trailer_length == F5_MEDV10_LEN && trailer_ver == 0) { /* In v10, flowIDs are 32bit */ tdata->flow = tvb_get_ntohl(tvb, o); proto_tree_add_item(tree, hf_flow_id, tvb, o, 4, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 4, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 4; tdata->peer_flow = tvb_get_ntohl(tvb, o); proto_tree_add_item(tree, hf_peer_id, tvb, o, 4, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 4, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 4; } else { /* After v10, flowIDs are 64bit */ tdata->flow = tvb_get_ntoh64(tvb, o); proto_tree_add_item(tree, hf_flow_id, tvb, o, 8, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 8, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 8; tdata->peer_flow = tvb_get_ntoh64(tvb, o); proto_tree_add_item(tree, hf_peer_id, tvb, o, 8, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 8, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 8; } tdata->flows_set = 1; if (trailer_ver >= 3) { proto_tree_add_item(tree, hf_cf_flags2, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; } proto_tree_add_item(tree, hf_cf_flags, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; proto_tree_add_item(tree, hf_flow_type, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; } /* We do not need to do anything if we don't have a tree */ /* Needed to get here so that analysis and tap will work. */ if (tree == NULL) return trailer_length; proto_tree_add_item(tree, hf_ha_unit, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; proto_tree_add_item(tree, hf_reserved, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; if (trailer_ver >= 2) { proto_tree_add_item(tree, hf_priority, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; } if (trailer_ver >= 1) { if (rstcauselen) { proto_tree *rc_tree; proto_item *rc_item; guint64 rstcauseval; guint64 rstcauseline; guint startcause; guint8 rstcausepeer; rc_item = proto_tree_add_item(tree, hf_rstcause, tvb, o, rstcauselen + 1, ENC_NA); rc_tree = proto_item_add_subtree(rc_item, ett_f5ethtrailer_rstcause); proto_tree_add_item(rc_tree, hf_rstcause_len, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; startcause = o; switch (rstcausever) { case 0x00: rstcausepeer = tvb_get_guint8(tvb, o) & 0x1; proto_tree_add_item(rc_tree, hf_rstcause_ver, tvb, o, 1, ENC_BIG_ENDIAN); proto_tree_add_item(rc_tree, hf_rstcause_peer, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; rstcauseval = tvb_get_ntoh64(tvb, o); rstcauseline = (rstcauseval & 0x000000000000ffffLL); rstcauseval = (rstcauseval & 0xffffffffffff0000LL) >> 16; proto_tree_add_uint64_format_value(rc_tree, hf_rstcause_val, tvb, o, 6, rstcauseval, "0x%012" PRIx64, rstcauseval); proto_tree_add_item(rc_tree, hf_rstcause_line, tvb, o + 6, 2, ENC_BIG_ENDIAN); o += 8; proto_item_append_text(rc_item, ": [%" PRIx64 ":%" PRIu64 "]%s %s", rstcauseval, rstcauseline, rstcausepeer ? " {peer}" : "", tvb_get_string_enc(pinfo->pool, tvb, o, rstcauselen - (o - startcause), ENC_ASCII)); proto_tree_add_item(rc_tree, hf_rstcause_txt, tvb, o, rstcauselen - (o - startcause), ENC_ASCII | ENC_NA); break; default: break; } } } return trailer_length; } /* dissect_med_trailer() */ /*---------------------------------------------------------------------------*/ /* Low level trailers */ /** * @brief Dissect old format "low" trailer TLV * * @param tvb Pointer to the tvb to be processed * @param pinfo Pointer to packet_info struct * @param tree Pointer to protocol tree * @param offset Offset into the tvb where trailer begins * @param trailer_length Length of the trailer data to process * @param trailer_ver Version of the trailer detected * @param tdata Pointer to tap data structure * @return Number of btyes consumed */ static guint dissect_low_trailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, guint offset, guint8 trailer_length, guint8 trailer_ver, f5eth_tap_data_t *tdata) { proto_item *pi = NULL; guint ingress; guint o; guint vipnamelen = VIP_NAME_LEN; guint slot_display = 0; gint slot_display_field = -1; guint tmm; switch (trailer_ver) { case 0: if (trailer_length != F5_LOWV10_LEN && trailer_length != F5_LOWV94_LEN) { return 0; } if (trailer_length == F5_LOWV94_LEN) { slot_display = tvb_get_guint8(tvb, offset + F5_OFF_LOW_SLOT); slot_display_field = hf_slot0; /* Analysis doesn't care about the virtual name, only populate if there is a tap * active */ if (have_tap_listener(tap_f5ethtrailer) && tvb_get_guint8(tvb, offset + (F5_LOWV94_LEN - 16)) != 0) { tdata->virtual_name = tvb_get_string_enc(pinfo->pool, tvb, offset + (F5_LOWV94_LEN - 16), 16, ENC_ASCII); } } else { slot_display = tvb_get_guint8(tvb, offset + F5_OFF_LOW_SLOT) + 1; slot_display_field = hf_slot1; /* Analysis doesn't care about the virtual name, only populate if there is a tap * active */ if (have_tap_listener(tap_f5ethtrailer) && tvb_get_guint8(tvb, offset + (F5_LOWV10_LEN - 16)) != 0) { tdata->virtual_name = tvb_get_string_enc(pinfo->pool, tvb, offset + (F5_LOWV10_LEN - 16), 16, ENC_ASCII); } } break; case 1: if (trailer_length < F5_LOWV1_LENMIN) { /* too small */ return 0; } vipnamelen = tvb_get_guint8(tvb, offset + F5_LOWV1_LENMIN - 1); /* check size is valid */ if (vipnamelen + F5_LOWV1_LENMIN != trailer_length) { return 0; } slot_display = tvb_get_guint8(tvb, offset + F5_OFF_LOW_SLOT) + 1; slot_display_field = hf_slot1; /* Analysis doesn't care about the virtual name, only populate if there is a tap active */ if (vipnamelen > 0 && have_tap_listener(tap_f5ethtrailer)) { tdata->virtual_name = tvb_get_string_enc(pinfo->pool, tvb, offset + F5_LOWV1_LENMIN, vipnamelen, ENC_ASCII); } break; default: return 0; } ingress = tvb_get_guint8(tvb, offset + F5_OFF_LOW_ING); tdata->ingress = ingress == 0 ? 0 : 1; tmm = tvb_get_guint8(tvb, offset + F5_OFF_LOW_TMM); if (tmm < F5ETH_TAP_TMM_MAX && slot_display < F5ETH_TAP_SLOT_MAX) { tdata->tmm = tmm; tdata->slot = slot_display; } /* Is the column visible? */ if (pref_info_type != none) { f5eth_set_info_col(pinfo, ingress, slot_display, tmm); } /* We do not need to do anything more if we don't have a tree and we are not performing * analysis and this is not v9.4. If v9.4, need to continue to get flow * information.*/ if (pref_perform_analysis == FALSE && tree == NULL && !(trailer_length == F5_LOWV94_LEN && trailer_ver == 0 && have_tap_listener(tap_f5ethtrailer))) { return trailer_length; } o = offset; o += render_f5_legacy_hdr(tvb, tree, o); /* Use special formatting here so that users do not have to filter on "IN" * and "OUT", but rather can continue to use typical boolean values. "IN" * and "OUT" are provided as convenience. */ proto_tree_add_boolean_format_value(tree, hf_ingress, tvb, o, 1, ingress, "%s (%s)", tfs_get_true_false(ingress), tfs_get_string(ingress, &f5tfs_ing)); o++; proto_tree_add_uint(tree, slot_display_field, tvb, o, 1, slot_display); o += 1; proto_tree_add_item(tree, hf_tmm, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; if (trailer_length == F5_LOWV94_LEN && trailer_ver == 0) { /* In v9.4, flowIDs, flags and type are here in low */ tdata->flow = tvb_get_ntohl(tvb, o); proto_tree_add_item(tree, hf_flow_id, tvb, o, 4, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 4, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 4; tdata->peer_flow = tvb_get_ntohl(tvb, o); proto_tree_add_item(tree, hf_peer_id, tvb, o, 4, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 4, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 4; tdata->flows_set = 1; proto_tree_add_item(tree, hf_cf_flags, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; proto_tree_add_item(tree, hf_flow_type, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; } /* We do not need to do anything more if we don't have a tree */ /* Needed to get here so that analysis will work. */ if (tree == NULL) return trailer_length; if (trailer_ver == 1) { pi = proto_tree_add_item(tree, hf_vipnamelen, tvb, o, 1, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 1; } pi = proto_tree_add_item(tree, hf_vip, tvb, o, vipnamelen, ENC_ASCII | ENC_NA); proto_item_prepend_text(pi, "VIP "); return trailer_length; } /* dissect_low_trailer() */ /** * @brief Render a header tree for new format tlvs * * @param tvb Pointer to tvb * @param tree Pointer to protocol tree * @param offset Offset into the tvb */ static void render_f5dptv1_tlvhdr(tvbuff_t *tvb, proto_tree *tree, gint offset) { proto_item *pi = NULL; guint32 provider; guint32 type; pi = proto_tree_add_item(tree, hf_trailer_hdr, tvb, offset, F5_DPT_V1_TLV_HDR_LEN, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_trailer_hdr); proto_tree_add_item_ret_uint(tree, hf_provider, tvb, offset + F5_DPT_V1_TLV_PROVIDER_OFF, F5_DPT_V1_TLV_PROVIDER_LEN, ENC_BIG_ENDIAN, &provider); proto_item_append_text(pi, ", Provider: %u", provider); proto_tree_add_item_ret_uint(tree, hf_type, tvb, offset + F5_DPT_V1_TLV_TYPE_OFF, F5_DPT_V1_TLV_TYPE_LEN, ENC_BIG_ENDIAN, &type); proto_item_append_text(pi, ", Type: %u", type); proto_tree_add_item(tree, hf_length, tvb, offset + F5_DPT_V1_TLV_LENGTH_OFF, F5_DPT_V1_TLV_LENGTH_LEN, ENC_BIG_ENDIAN); proto_tree_add_item(tree, hf_version, tvb, offset + F5_DPT_V1_TLV_VERSION_OFF, F5_DPT_V1_TLV_VERSION_LEN, ENC_BIG_ENDIAN); } /* render_f5dptv1_tlvhdr() */ /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT high noise trailer TLV * * @param tvb The tvbuff containing the TLV block (header and data) * @param pinfo The pinfo structure for the frame * @param tree The tree to render the TVB under * @param data Pointer to tdata for the trailer * @return The size of the TVB */ static int dissect_dpt_trailer_noise_high(tvbuff_t *tvb, packet_info *pinfo _U_, proto_tree *tree, void *data) { proto_item *pi; gint o; gint len; gint ver; guint8 ipproto; f5eth_tap_data_t *tdata = (f5eth_tap_data_t *)data; DISSECTOR_ASSERT(tdata != NULL); len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); ver = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); /* Unknown version, cannot do anything */ if (ver != 1) { return 0; } if (tree == NULL) { /* We do not need to do anything if we do not have a tree */ return len; } pi = proto_tree_add_item(tree, hf_high_id, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_high); render_f5dptv1_tlvhdr(tvb, tree, 0); o = F5_DPT_V1_TLV_HDR_LEN; tdata->noise_high = 1; /* If there was no peer id in the medium trailer, then there is no peer flow information to * render; skip it all. */ if (tdata->peer_flow == 0) { proto_tree_add_item(tree, hf_peer_nopeer, tvb, o, len - o, ENC_NA); return len; } /* Add in the high order structures. */ ipproto = tvb_get_guint8(tvb, o); proto_tree_add_item(tree, hf_peer_ipproto, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; proto_tree_add_item(tree, hf_peer_vlan, tvb, o, 2, ENC_BIG_ENDIAN); o += 2; /* peer remote address */ if (pref_pop_other_fields) { displayIPv6as4(tree, hf_ip_ipaddr, -1, tvb, o, TRUE); pi = proto_tree_add_item(tree, hf_ip6_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); } displayIPv6as4(tree, hf_peer_remote_addr, hf_peer_remote_rtdom, tvb, o, FALSE); displayIPv6as4(tree, hf_peer_ipaddr, hf_peer_rtdom, tvb, o, TRUE); proto_tree_add_item(tree, hf_peer_remote_ip6addr, tvb, o, 16, ENC_NA); pi = proto_tree_add_item(tree, hf_peer_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); o += 16; /* peer local address */ if (pref_pop_other_fields) { displayIPv6as4(tree, hf_ip_ipaddr, -1, tvb, o, TRUE); pi = proto_tree_add_item(tree, hf_ip6_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); } displayIPv6as4(tree, hf_peer_local_addr, hf_peer_local_rtdom, tvb, o, FALSE); displayIPv6as4(tree, hf_peer_ipaddr, hf_peer_rtdom, tvb, o, TRUE); proto_tree_add_item(tree, hf_peer_local_ip6addr, tvb, o, 16, ENC_NA); pi = proto_tree_add_item(tree, hf_peer_ip6addr, tvb, o, 16, ENC_NA); proto_item_set_hidden(pi); o += 16; /* peer remote port */ if (pref_pop_other_fields) { switch (ipproto) { case IP_PROTO_TCP: pi = proto_tree_add_item(tree, hf_tcp_tcpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; case IP_PROTO_UDP: pi = proto_tree_add_item(tree, hf_udp_udpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; } } proto_tree_add_item(tree, hf_peer_remote_port, tvb, o, 2, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_peer_port, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 2; /* peer remote port */ if (pref_pop_other_fields) { switch (ipproto) { case IP_PROTO_TCP: pi = proto_tree_add_item(tree, hf_tcp_tcpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; case IP_PROTO_UDP: pi = proto_tree_add_item(tree, hf_udp_udpport, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); break; } } proto_tree_add_item(tree, hf_peer_local_port, tvb, o, 2, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_peer_port, tvb, o, 2, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); return len; } /* dissect_dpt_trailer_noise_high() */ /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT medium noise trailer TVB * * @param tvb The tvbuff containing the TLV block (header and data) * @param pinfo The pinfo structure for the frame * @param tree The tree to render the TVB under * @param data Pointer to tdata for the trailer * @return The size of the TVB */ static int dissect_dpt_trailer_noise_med(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { proto_item *pi; gint o; int rstcauselen = 0; int badrstcauselen = 0; guint rstcausever = 0xff; gint len; gint ver; f5eth_tap_data_t *tdata = (f5eth_tap_data_t *)data; DISSECTOR_ASSERT(tdata != NULL); len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); ver = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); /* Unknown version, cannot do anything */ if (ver != 4) { return 0; } pi = proto_tree_add_item(tree, hf_med_id, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_med); render_f5dptv1_tlvhdr(tvb, tree, 0); o = F5_DPT_V1_TLV_HDR_LEN; tdata->noise_med = 1; rstcauselen = tvb_get_guint8(tvb, o + F5_MEDV4_LENMIN - 1); /* Check for an invalid reset cause length and do not try to reference any of the data if it is * bad */ if (tvb_reported_length_remaining(tvb, o + F5_MEDV4_LENMIN) < rstcauselen) { badrstcauselen = 1; /* Set this to zero to prevent processing of things that utilze it */ rstcauselen = 0; } if (rstcauselen) rstcausever = (tvb_get_guint8(tvb, o + F5_MEDV4_LENMIN) & 0xfe) >> 1; /* If we want the RST cause in the summary, we need to do it here, * before the tree check below */ if (rstcauselen && rstcause_in_info) { if (rstcausever == 0x00) { col_append_sep_fstr(pinfo->cinfo, COL_INFO, " ", "[F5RST%s: %s]", tvb_get_guint8(tvb, o + F5_MEDV4_LENMIN) & 0x01 ? "(peer)" : "", tvb_get_string_enc( pinfo->pool, tvb, o + F5_MEDV4_LENMIN + 9, rstcauselen - 9, ENC_ASCII)); } } /* We do not need to do anything more if we don't have a tree and we are not performing * analysis */ if (pref_perform_analysis == FALSE && tree == NULL) return len; tdata->flow = tvb_get_ntoh64(tvb, o); proto_tree_add_item(tree, hf_flow_id, tvb, o, 8, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 8, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 8; tdata->peer_flow = tvb_get_ntoh64(tvb, o); proto_tree_add_item(tree, hf_peer_id, tvb, o, 8, ENC_BIG_ENDIAN); pi = proto_tree_add_item(tree, hf_any_flow, tvb, o, 8, ENC_BIG_ENDIAN); proto_item_set_hidden(pi); o += 8; tdata->flows_set = 1; proto_tree_add_item(tree, hf_cf_flags2, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; proto_tree_add_item(tree, hf_cf_flags, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; proto_tree_add_item(tree, hf_flow_type, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; /* We do not need to do anything if we don't have a tree */ /* Needed to get here so that analysis and tap will work. */ if (tree == NULL) { return len; } proto_tree_add_item(tree, hf_ha_unit, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; proto_tree_add_item(tree, hf_reserved, tvb, o, 4, ENC_BIG_ENDIAN); o += 4; proto_tree_add_item(tree, hf_priority, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; if (badrstcauselen) { proto_tree *rc_tree; proto_item *rc_item; rc_item = proto_tree_add_item(tree, hf_rstcause, tvb, o, len - o, ENC_NA); rc_tree = proto_item_add_subtree(rc_item, ett_f5ethtrailer_rstcause); rc_item = proto_tree_add_item(rc_tree, hf_rstcause_len, tvb, o, 1, ENC_BIG_ENDIAN); expert_add_info(pinfo, rc_item, &ei_f5eth_badlen); } else if (rstcauselen) { proto_tree *rc_tree; proto_item *rc_item; guint64 rstcauseval; guint64 rstcauseline; guint startcause; guint8 rstcausepeer; rc_item = proto_tree_add_item(tree, hf_rstcause, tvb, o, rstcauselen + 1, ENC_NA); rc_tree = proto_item_add_subtree(rc_item, ett_f5ethtrailer_rstcause); proto_tree_add_item(rc_tree, hf_rstcause_len, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; startcause = o; switch (rstcausever) { case 0x00: rstcausepeer = tvb_get_guint8(tvb, o) & 0x1; proto_tree_add_item(rc_tree, hf_rstcause_ver, tvb, o, 1, ENC_BIG_ENDIAN); proto_tree_add_item(rc_tree, hf_rstcause_peer, tvb, o, 1, ENC_BIG_ENDIAN); o += 1; rstcauseval = tvb_get_ntoh64(tvb, o); rstcauseline = (rstcauseval & 0x000000000000ffffLL); rstcauseval = (rstcauseval & 0xffffffffffff0000LL) >> 16; proto_tree_add_uint64_format_value(rc_tree, hf_rstcause_val, tvb, o, 6, rstcauseval, "0x%012" PRIx64, rstcauseval); proto_tree_add_item(rc_tree, hf_rstcause_line, tvb, o + 6, 2, ENC_BIG_ENDIAN); o += 8; proto_item_append_text(rc_item, ": [%" PRIx64 ":%" PRIu64 "]%s %s", rstcauseval, rstcauseline, rstcausepeer ? " {peer}" : "", tvb_get_string_enc( pinfo->pool, tvb, o, rstcauselen - (o - startcause), ENC_ASCII)); proto_tree_add_item(rc_tree, hf_rstcause_txt, tvb, o, rstcauselen - (o - startcause), ENC_ASCII | ENC_NA); /*o = startcause + rstcauselen;*/ break; default: break; } } return len; } /* dissect_dpt_trailer_noise_med() */ static const value_string f5_obj_data_types[] = { {0, "Virtual Server"}, {1, "Port"}, {2, "Trunk"}, {255, "Unknown"}, {0, NULL} }; /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT low noise trailer TVB * * @param tvb The tvbuff containing the TLV block (header and data) * @param pinfo The pinfo structure for the frame * @param tree The tree to render the TVB under * @param data Pointer to tdata for the trailer * @return The size of the TVB */ static int dissect_dpt_trailer_noise_low(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { gint len; gint ver; proto_item *pi; proto_item *ti; gint offset; guint flags; guint ingress; guint slot_display = 0; guint tmm; f5eth_tap_data_t *tdata = (f5eth_tap_data_t *)data; DISSECTOR_ASSERT(tdata != NULL); len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); ver = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); /* Unknown version, cannot do anything */ if (ver < 2 || ver > 4) { return 0; } /* Add the Low Noise trailer and attach a subtree */ pi = proto_tree_add_item(tree, hf_low_id, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_low); render_f5dptv1_tlvhdr(tvb, tree, 0); offset = F5_DPT_V1_TLV_HDR_LEN; tdata->noise_low = 1; /* Direction */ flags = tvb_get_guint8(tvb, offset); if (ver == 2) { ingress = flags; } else { ingress = flags & F5_LOW_FLAGS_INGRESS_MASK; } /* Use special formatting here so that users do not have to filter on "IN" * and "OUT", but rather can continue to use typical boolean values. "IN" * and "OUT" are provided as convenience. */ pi = proto_tree_add_boolean_format_value(tree, hf_ingress, tvb, offset, 1, ingress, "%s (%s)", tfs_get_true_false(ingress), tfs_get_string(ingress, &f5tfs_ing)); if (ver > 2) { /* The old ingress field is now a flag field. Leave the old ingress field * for backward compatibility for users that are accustomed to using * "f5ethtrailer.ingress" but mark it as generated to indicate that that * field no longer really exists. */ proto_item_set_generated(pi); proto_tree_add_bitmask( tree, tvb, offset, hf_flags, ett_f5ethtrailer_low_flags, hf_flags__fields, ENC_BIG_ENDIAN); } tdata->ingress = ingress == 0 ? 0 : 1; offset += 1; /* Slot */ slot_display = tvb_get_guint8(tvb, offset) + 1; proto_tree_add_uint(tree, hf_slot1, tvb, offset, 1, slot_display); offset += 1; /* TMM */ tmm = tvb_get_guint8(tvb, offset); if (tmm < F5ETH_TAP_TMM_MAX && slot_display < F5ETH_TAP_SLOT_MAX) { tdata->tmm = tmm; tdata->slot = slot_display; } proto_tree_add_item(tree, hf_tmm, tvb, offset, 1, ENC_BIG_ENDIAN); offset += 1; /* Is the column visible? */ if (pref_info_type != none) { f5eth_set_info_col(pinfo, ingress, slot_display, tmm); } if (ver < 4) { /* Low noise versions 2 and 3 */ /* VIP Name */ gint viplen = tvb_get_guint8(tvb, offset); /* Make sure VIP Name Length does not extend past the TVB */ if (tvb_reported_length_remaining(tvb, offset) < viplen) { pi = proto_tree_add_item(tree, hf_vip, tvb, offset, 0, ENC_ASCII); expert_add_info(pinfo, pi, &ei_f5eth_badlen); /* Cannot go any further */ return len; } gchar *text = tvb_format_text(pinfo->pool, tvb, offset +1, viplen); ti = proto_tree_add_subtree_format( tree, tvb, offset, viplen + 1, ett_f5ethtrailer_obj_names, NULL, "Virtual Server: %s", text); proto_tree_add_item(ti, hf_vipnamelen, tvb, offset, 1, ENC_BIG_ENDIAN); offset += 1; proto_tree_add_item(ti, hf_vip, tvb, offset, viplen, ENC_ASCII); if (viplen > 0 && have_tap_listener(tap_f5ethtrailer)) { tdata->virtual_name = text; } offset += viplen; } else { /* Low noise version 4 */ /* This area now is a data block containing a number of BIG-IP config object names * i.e. Virtual server that handled the packt * Port that handled the packet * Trunk that handled the packet * * 1-Byte Length of block (excluding this byte) * len-Bytes data block * * * Then the "data block" is a variable number of object names * Each name value is: * 1-Byte Type * 1-Byte Length (excluding type and length bytes) * len-Bytes String * */ gint data_len = tvb_get_gint8(tvb, offset); pi = proto_tree_add_item(tree, hf_data, tvb, offset, 1, ENC_NA); proto_item_set_text(pi, "Associated config object names"); ti = proto_item_add_subtree(pi, ett_f5ethtrailer_obj_names); proto_tree_add_item(ti, hf_obj_data_len, tvb, offset, 1, ENC_BIG_ENDIAN); offset += 1; if (tvb_reported_length_remaining(tvb, offset) < data_len) { expert_add_info(pinfo, pi, &ei_f5eth_badlen); /* Cannot go any further */ return len; } proto_item_set_len(pi, data_len + 1); /* Begin parsing the data field and adding items for the strings contained */ tvbuff_t *data_tvb = tvb_new_subset_length(tvb, offset, data_len); gint data_off = 0; while (data_off < data_len) { gint field_name_len_idx; gint field_name_idx; gchar *text_format; guint8 t = tvb_get_guint8(data_tvb, data_off); guint8 l = tvb_get_guint8(data_tvb, data_off + 1); switch (t) { case 0: /* Virtual Server */ field_name_len_idx = hf_vipnamelen; field_name_idx = hf_vip; text_format = "Virtual Server: %s"; break; case 1: /* Port */ field_name_len_idx = hf_portnamelen; field_name_idx = hf_phys_port; text_format = "Port: %s"; break; case 2: /* Trunk */ field_name_len_idx = hf_trunknamelen; field_name_idx = hf_trunk; text_format = "Trunk: %s"; break; default: /* unknown type */ t = 255; /* Unknown */ field_name_len_idx = hf_obj_data_len; field_name_idx = hf_data_str; text_format = "Unknown type"; break; } if (tvb_reported_length_remaining(data_tvb, data_off + 2) < l) { ti = proto_tree_add_subtree_format( tree, data_tvb, data_off, 2, ett_f5ethtrailer_obj_names, NULL, text_format, ""); proto_tree_add_item(ti, hf_obj_name_type, data_tvb, data_off, 1, ENC_BIG_ENDIAN); pi = proto_tree_add_item( ti, field_name_len_idx, data_tvb, data_off + 1, 1, ENC_BIG_ENDIAN); expert_add_info(pinfo, pi, &ei_f5eth_badlen); /* Cannot go any further */ return len; } gchar *text = tvb_format_text(pinfo->pool, data_tvb, data_off + 2, l); ti = proto_tree_add_subtree_format( tree, data_tvb, data_off, l + 2, ett_f5ethtrailer_obj_names, NULL, text_format, text); pi = proto_tree_add_item(ti, hf_obj_name_type, data_tvb, data_off, 1, ENC_BIG_ENDIAN); if (t == 255) { expert_add_info(pinfo, pi, &ei_f5eth_undecoded); } proto_tree_add_item(ti, field_name_len_idx, data_tvb, data_off + 1, 1, ENC_BIG_ENDIAN); proto_tree_add_item(ti, field_name_idx, data_tvb, data_off + 2, l, ENC_ASCII|ENC_NA); if (t == 0 && l > 0 && have_tap_listener(tap_f5ethtrailer)) { tdata->virtual_name = text; } data_off += l + 2; } offset += data_off; } return offset; } /* dissect_dpt_trailer_noise_low() */ /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT noise provider TVB * * @param tvb The tvbuff containing the packet data for this TLV * @param pinfo The pinfo structure for the frame * @param tree The tree to render the TVB under * @param data Pointer to tdata for the trailer * @return The size of the TVB */ static int dissect_dpt_trailer_noise(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { guint32 pattern; pattern = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_TYPE_OFF) << 16 | tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); return ( dissector_try_uint_new(noise_subdissector_table, pattern, tvb, pinfo, tree, FALSE, data)); } /* dissect_dpt_trailer_noise() */ /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT TVB for an unknown provider * * @param tvb The tvbuff containing the packet data for this DPT * @param pinfo The pinfo structure for the frame * @param tree The tree to render the TVB under * @param data Pointer to tdata for the trailer * @return The size of the TVB */ static int dissect_dpt_trailer_unknown(tvbuff_t *tvb, packet_info *pinfo _U_, proto_tree *tree, void *data _U_) { proto_item *pi; gint len; len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); if (tree) { pi = proto_tree_add_item(tree, hf_dpt_unknown, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5ethtrailer_unknown); render_f5dptv1_tlvhdr(tvb, tree, 0); proto_tree_add_item( tree, hf_data, tvb, F5_DPT_V1_TLV_HDR_LEN, len - F5_DPT_V1_TLV_HDR_LEN, ENC_NA); } return len; } /* dissect_dpt_trailer_unknown() */ /*---------------------------------------------------------------------------*/ /** * @brief Render the data for DPT block * * There is no predetermined or guaranteed order the DPT TLVs will be * attached to the frame. Use conversation data to coalesce information * across TLVs and frames. * * @param tvb The tvbuff containing the packet data for this DPT block * @param pinfo The pinfo structure for the frame * @param tree The tree to render the DPT block in * @param data Pointer to tdata for the trailer * @return The size of the DPT block */ static int dissect_dpt_trailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { proto_item *pi; proto_tree *hdr_tree; gint dpt_len; gint dpt_ver; gint o; /* offset*/ dpt_len = tvb_get_ntohs(tvb, F5_DPT_V1_HDR_LENGTH_OFF); dpt_ver = tvb_get_ntohs(tvb, F5_DPT_V1_HDR_VERSION_OFF); /* Render the DPT header */ pi = proto_tree_add_item(tree, hf_trailer_hdr, tvb, 0, F5_DPT_V1_TLV_HDR_LEN, ENC_NA); proto_item_append_text(pi, " - Version: %d", dpt_ver); hdr_tree = proto_item_add_subtree(pi, ett_f5ethtrailer_trailer_hdr); proto_tree_add_item(hdr_tree, hf_dpt_magic, tvb, F5_DPT_V1_HDR_MAGIC_OFF, F5_DPT_V1_HDR_MAGIC_LEN, ENC_BIG_ENDIAN); proto_tree_add_item(hdr_tree, hf_dpt_len, tvb, F5_DPT_V1_HDR_LENGTH_OFF, F5_DPT_V1_HDR_LENGTH_LEN, ENC_BIG_ENDIAN); proto_tree_add_item(hdr_tree, hf_dpt_ver, tvb, F5_DPT_V1_HDR_VERSION_OFF, F5_DPT_V1_HDR_VERSION_LEN, ENC_BIG_ENDIAN); /* If this is an unknown version, return after rendering header and data */ if (dpt_ver < F5_DPT_V1_HDR_VERSION_MIN || dpt_ver > F5_DPT_V1_HDR_VERSION_MAX) { proto_tree_add_item( tree, hf_data, tvb, F5_DPT_V1_HDR_LEN, dpt_len - F5_DPT_V1_HDR_LEN, ENC_NA); return dpt_len; } o = F5_DPT_V1_HDR_LEN; while (tvb_reported_length_remaining(tvb, o) >= F5_DPT_V1_TLV_HDR_LEN) { tvbuff_t *tvb_dpt_tlv; gint tvb_dpt_tlv_len; gint provider_id; tvb_dpt_tlv_len = tvb_get_ntohs(tvb, o + F5_DPT_V1_TLV_LENGTH_OFF); /* Report an error if the length specified in the header is either * Not long enough to contain the header * Indicates that the TLV is longer than the data that would have been captured. */ if (tvb_dpt_tlv_len < F5_DPT_V1_TLV_HDR_LEN || tvb_dpt_tlv_len > tvb_reported_length_remaining(tvb, o)) { proto_tree *subtree; pi = proto_tree_add_item(tree, hf_dpt_unknown, tvb, o, F5_DPT_V1_TLV_HDR_LEN, ENC_NA); subtree = proto_item_add_subtree(pi, ett_f5ethtrailer_unknown); proto_tree_add_item(subtree, hf_provider, tvb, o + F5_DPT_V1_TLV_PROVIDER_OFF, F5_DPT_V1_TLV_PROVIDER_LEN, ENC_BIG_ENDIAN); proto_tree_add_item(subtree, hf_type, tvb, o + F5_DPT_V1_TLV_TYPE_OFF, F5_DPT_V1_TLV_TYPE_LEN, ENC_BIG_ENDIAN); pi = proto_tree_add_item(subtree, hf_length, tvb, o + F5_DPT_V1_TLV_LENGTH_OFF, F5_DPT_V1_TLV_LENGTH_LEN, ENC_BIG_ENDIAN); expert_add_info(pinfo, pi, &ei_f5eth_badlen); if (tvb_dpt_tlv_len >= F5_DPT_V1_TLV_HDR_LEN) { proto_tree_add_item(subtree, hf_version, tvb, o + F5_DPT_V1_TLV_VERSION_OFF, F5_DPT_V1_TLV_VERSION_LEN, ENC_BIG_ENDIAN); } /* If the length here is bad, then we probably will not index to the next TLV, so * abort and do not try to render anymore TLVs. */ break; } provider_id = tvb_get_ntohs(tvb, o + F5_DPT_V1_TLV_PROVIDER_OFF); tvb_dpt_tlv = tvb_new_subset_length(tvb, o, tvb_dpt_tlv_len); if (dissector_try_uint_new( provider_subdissector_table, provider_id, tvb_dpt_tlv, pinfo, tree, FALSE, data) == 0) { /* Render the TLV header as unknown */ dissect_dpt_trailer_unknown(tvb_dpt_tlv, pinfo, tree, data); } o += tvb_dpt_tlv_len; } return dpt_len; } /* dissect_dpt_trailer() */ /*---------------------------------------------------------------------------*/ /** * @brief Dissect the old format trailers (9.4.2 - 13.x) * * @param tvb The tvbuff containing the packet data for this trailer * @param pinfo The pinfo structure for the frame * @param tree The tree to render the thrailer under * @param data Pointer to tdata for the trailer * @return gint Number of bytes cosumed by the dissector */ static gint dissect_old_trailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { guint offset = 0; /* While we still have data in the trailer. For old format trailers, this needs * type, length, version (3 bytes) and for new format trailers, the magic header (4 bytes). * All old format trailers are at least 4 bytes long, so just check for length of magic. */ while (tvb_reported_length_remaining(tvb, offset) >= F5_MIN_SANE) { /* length field does not include the type and length bytes. Add them back in */ guint8 len = tvb_get_guint8(tvb, offset + F5_OFF_LENGTH) + F5_OFF_VERSION; if (len > tvb_reported_length_remaining(tvb, offset) || len < F5_MIN_SANE || len > F5_MAX_SANE) { /* Invalid length - either a malformed trailer, corrupt packet, or not f5ethtrailer */ return offset; } guint8 type = tvb_get_guint8(tvb, offset); guint8 ver = tvb_get_guint8(tvb, offset + F5_OFF_VERSION); /* Parse out the specified trailer. */ proto_tree *type_tree = NULL; proto_item *ti = NULL; f5eth_tap_data_t *tdata = (f5eth_tap_data_t *)data; guint processed = 0; switch (type) { case F5TYPE_LOW: ti = proto_tree_add_item(tree, hf_low_id, tvb, offset, len, ENC_NA); type_tree = proto_item_add_subtree(ti, ett_f5ethtrailer_low); processed = dissect_low_trailer(tvb, pinfo, type_tree, offset, len, ver, tdata); if (processed > 0) { tdata->trailer_len += processed; tdata->noise_low = 1; } break; case F5TYPE_MED: ti = proto_tree_add_item(tree, hf_med_id, tvb, offset, len, ENC_NA); type_tree = proto_item_add_subtree(ti, ett_f5ethtrailer_med); processed = dissect_med_trailer(tvb, pinfo, type_tree, offset, len, ver, tdata); if (processed > 0) { tdata->trailer_len += processed; tdata->noise_med = 1; } break; case F5TYPE_HIGH: ti = proto_tree_add_item(tree, hf_high_id, tvb, offset, len, ENC_NA); type_tree = proto_item_add_subtree(ti, ett_f5ethtrailer_high); processed = dissect_high_trailer(tvb, pinfo, type_tree, offset, len, ver, tdata); if (processed > 0) { tdata->trailer_len += processed; tdata->noise_high = 1; } break; default: /* Unknown type - malformed trailer, corrupt packet, or not f5ethtrailer - bali out*/ return offset; } if (processed == 0) { /* couldn't process trailer - bali out */ proto_item_set_len(ti, 1); return offset; } offset += processed; } return offset; } /* dissect_old_trailer() */ /*---------------------------------------------------------------------------*/ /** * @brief Dissector entry point * * @param tvb The tvbuff containing the packet data for this trailer * @param pinfo The pinfo structure for the frame * @param tree The tree to render the thrailer under * @param data Pointer to tdata for the trailer * @return gint Number of bytes cosumed by the dissector * * New format trailers (BIG-IP 14.0 and later) begin with * 4-byte magic number (0xf5deb0f5) * 2-byte trailer length (Length includes header) * 2-byte version * 1 or more variable length TLVs * * Each New format TLV starts with * 2-byte Provider ID * 2-byte Type ID * 2-byte TLV Length (Length includes header) * 2-byte Version * (TLVlen - 8) bytes of data * * Old format trailers (BIG-IP 9.4.2 - 13.x) were a list of variable length * TLVs. * 1-byte Type * 1-byte TLV Length (TLVlen does not include the type and length fields) * TLVlen bytes of data */ static int dissect_f5ethtrailer(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { guint trailer_length; guint offset = 0; found_t found = NONE; gboolean has_fcs = FALSE; if (tvb_reported_length(tvb) != tvb_captured_length(tvb)) { /* The trailers are really only helpful if we have the entire trailer. If we don't, don't try to dissect it. */ return 0; } /* In some circumstances it is possible that a short ethernet frame was padded before tmm was able to append f5ethtrailer. In many cases (and should be) this padding is zeros. The f5ethtrailer does not start with a zero, so trim off any leading zeros before looking for an f5ethtrailer. */ while (tvb_offset_exists(tvb, offset) && tvb_get_gint8(tvb, offset) == 0) { offset++; } trailer_length = tvb_reported_length_remaining(tvb, offset); if (trailer_length < F5_LOWV1_LENMIN) { /* There must be at least enough bytes for a legacy low ver1 trailer. New format trailers will be longer */ return 0; } while (found == NONE) { /* Check if this is a new format trailer. */ if (trailer_length - offset >= F5_DPT_V1_HDR_MAGIC_LEN + F5_DPT_V1_HDR_LEN) { if (tvb_get_ntohl(tvb, offset) == F5_DPT_V1_HDR_MAGIC) { if (tvb_get_ntohs(tvb, offset + F5_DPT_V1_HDR_LENGTH_OFF) > trailer_length) { /* we have the right magic, but the length doesn't match up. assume we're not an f5ethtrailer, or it is corrupt. Either way, don't try and dissect. */ return 0; } /* Looks like a new format trailer */ found = NEW_FORMAT; goto found_trailer; } /* It's possible to have the trailer added after the FCS has already been added. Let's move in 4 bytes and check there. However, it is also possible for the FCS to start with a sequence of zeros that would have been already been skipped. If so, we need to back up. If there is an FCS display the Original. Only add this check for new format trailers. Old format trailers are becoming less common and likely wouldn't have been added after FCS anyway. If needed, the walk trailer prefernce would find the old format trailer after an FCS. This seems reasonable enough for old format trailers. */ for (guint i = 0; i <= offset && i <= 4; i++) { if (tvb_get_ntohl(tvb, offset + 4 - i) == F5_DPT_V1_HDR_MAGIC) { if (tvb_get_ntohs(tvb, offset + 4 - i + F5_DPT_V1_HDR_LENGTH_OFF) > trailer_length) { return 0; } found = NEW_FORMAT; has_fcs = TRUE; offset += 4 - i; goto found_trailer; } } } /* Not new format? Are we old format? */ guint tlv_type, tlv_length, tlv_ver; /* Check for old format trailers */ tlv_type = tvb_get_guint8(tvb, offset); tlv_length = tvb_get_guint8(tvb, offset + F5_OFF_LENGTH) + F5_OFF_VERSION; tlv_ver = tvb_get_guint8(tvb, offset + F5_OFF_VERSION); if ( tlv_length <= trailer_length && tlv_type >= F5TYPE_LOW && tlv_type <= F5TYPE_HIGH && tlv_length >= F5_MIN_SANE && tlv_length <= F5_MAX_SANE && tlv_ver <= F5TRAILER_VER_MAX) { /* Found at least one old format TLV */ found = OLD_FORMAT; goto found_trailer; } if (!pref_walk_trailer || tvb_reported_length_remaining(tvb, offset) <= F5_LOWV1_LENMIN) /* Didn't find an f5ethtrailer, and we're not going to keep looking. */ return 0; offset++; } found_trailer: ; /* Good to go, start dissection */ f5eth_tap_data_t *tdata; proto_item *trailer_item = NULL; /* Initialize data structure for taps and analysis */ tdata = wmem_new0(pinfo->pool, f5eth_tap_data_t); tdata->magic = F5ETH_TAP_MAGIC; tdata->slot = F5ETH_TAP_SLOT_MAX; tdata->tmm = F5ETH_TAP_TMM_MAX; if (tree) { trailer_item = proto_tree_add_item(tree, proto_f5ethtrailer, tvb, offset, -1, ENC_NA); tree = proto_item_add_subtree(trailer_item, ett_f5ethtrailer); if (has_fcs) { proto_tree_add_item(tree, hf_orig_fcs, tvb, offset - 4, 4, ENC_NA); } } if (found == NEW_FORMAT) { /* dissect new format trailer */ trailer_length = dissect_dpt_trailer(tvb_new_subset_remaining(tvb, offset), pinfo, tree, tdata); } else { /* dissect old format trailer */ trailer_length = dissect_old_trailer(tvb_new_subset_remaining(tvb, offset), pinfo, tree, tdata); } tdata->trailer_len = trailer_length; proto_item_set_len(trailer_item, trailer_length); /* If the analyis preference is enabled, process it */ if (pref_perform_analysis) { struct f5eth_analysis_data_t *ad; /* Get the analysis data information for this packet */ ad = (struct f5eth_analysis_data_t *)p_get_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer, 0); if (ad == NULL) { ad = new_f5eth_analysis_data_t(); p_add_proto_data(wmem_file_scope(), pinfo, proto_f5ethtrailer, 0, ad); } if (ad->analysis_done == 0) { ad->pkt_ingress = tdata->ingress; if (tdata->flows_set == 1) { ad->pkt_has_flow = tdata->flow == 0 ? 0 : 1; ad->pkt_has_peer = tdata->peer_flow == 0 ? 0 : 1; } /* Only perform the analysis if we had an opportunity to get the TCP information. In * this case, if the ip tap ran then they all should have run. We use IP so we don't * perform analysis every time we visit a UDP/ICMP, etc. packet. */ if (ad->ip_visited) perform_analysis(ad); } render_analysis(tvb, pinfo, tree, ad); } /* Call tap handlers if it appears that we got enough data * (should have low noise if there is anything) */ if (tdata->noise_low != 0) { tap_queue_packet(tap_f5ethtrailer, pinfo, tdata); } return trailer_length; } /* dissect_f5ethtrailer() */ /*-----------------------------------------------------------------------------------------------*/ /* Begin DPT TLS provider */ /*-----------------------------------------------------------------------------------------------*/ /* We want to be able to render TLS diagnostic data that is available and * generate keylog entries for later decryption use. We are not making * decisions about RFC compliance or functional correctness of the TLS * data here. If data is there, we will render it. If a keylog entry * can be generated we will generate it even if it is wrong. * * The diagnostic information provided in F5 Ethernet trailers is state information * inteded for troubleshooting and diagnostics. This data is not sent on the wire. * It is only appended to frames captured on the BIG-IP, if explicitly requested. As * such if the data exists in the context, it will be appended to each packet with a * TLS layer. Filtering of duplicate / appropriate data and interpretation is left * to the dissector. * * This will result in things like the TLS dissector displaying the client random * in the CLIENT HELLO packet, while the F5 Ethtrailer TLS shows all zeros for the * client random. Then the F5 Ethtrailer will provide the client random in the * ACK to the CLIENT HELLO. It will also result in the same information being * provided on multiple packets. * * All the necessary parts to create a valid keylog record needed for decryption * may not be available in the same frame. */ #define F5_DPT_PROVIDER_TLS 4 /* PRE13 in this context indicates pre TLS-v1.3, not pre-standard (draft) TLS-v1.3. i.e. TLS-v1.2 and earlier */ #define F5_DPT_TLS_PRE13_STD 0 #define F5_DPT_TLS_PRE13_EXT 1 #define F5_DPT_TLS_13_STD 2 #define F5_DPT_TLS_13_EXT 3 #define F5TLS_SECRET_LEN 48 #define F5TLS_SESS_ID_LEN 32 #define F5TLS_RANDOM_LEN 32 #define F5TLS_HASH_LEN 64 #define F5TLS_ZEROS_LEN 256 #define F5TLS_T2V1_LEN 393 typedef struct _F5TLS_ELEMENT { guchar *data; /* Pointer to a string of bytes wmem_file_scope allocated as needed. */ gint len; /* length of the item stored. */ } f5tls_element_t; /* * As we come across the initial crypto data, store it in a struct on the conversation. */ typedef struct _F5TLS_CONVERSATION_DATA { f5tls_element_t master_secret; f5tls_element_t client_random; /* added by TLS 1.3 */ f5tls_element_t erly_traf_sec; f5tls_element_t clnt_hs_sec; f5tls_element_t srvr_hs_sec; f5tls_element_t clnt_ap_sec; f5tls_element_t srvr_ap_sec; } f5tls_conversation_data_t; /* * As we collect enough information to create a keylog entry in the conversation data create * a field with the keylog entry on the first frame and store on the frame. This should limit * keylog entries to a unique list. */ typedef struct _F5TLS_PACKET_DATA { gchar *cr_ms; /* TLS 1.3 keylogs */ gchar *cr_erly_traff; gchar *cr_clnt_app; gchar *cr_srvr_app; gchar *cr_clnt_hs; gchar *cr_srvr_hs; } f5tls_packet_data_t; typedef struct _F5TLS_DATA { f5tls_conversation_data_t *conv; f5tls_packet_data_t *pkt; } f5tls_data_t; static int proto_f5ethtrailer_dpt_tls; static gint hf_f5tls_tls; /* TLS 1.x fields */ static gint hf_f5tls_secret_len; static gint hf_f5tls_mstr_sec; static gint hf_f5tls_clnt_rand; static gint hf_f5tls_srvr_rand; /* TLS 1.3 fields */ static gint hf_f5tls_early_traffic_sec; static gint hf_f5tls_clnt_hs_sec; static gint hf_f5tls_srvr_hs_sec; static gint hf_f5tls_clnt_app_sec; static gint hf_f5tls_srvr_app_sec; static gint hf_f5tls_keylog; static gint ett_f5tls; static gint ett_f5tls_std; static gint ett_f5tls_ext; static dissector_table_t tls_subdissector_table; /* The types of keylog entries that could be created */ typedef enum { CLIENT_RANDOM, CLIENT_TRAFFIC_SECRET_0, SERVER_TRAFFIC_SECRET_0, CLIENT_HANDSHAKE_TRAFFIC_SECRET, SERVER_HANDSHAKE_TRAFFIC_SECRET, EARLY_TRAFFIC_SECRET, } keylog_t; /* Create a field of zeros. We need to check if the secrets, randoms, etc are all zeros and memcmp * looks like the best way to do it. So, create a single, global field of zeros at file scope. * That should cut down on some overhead... */ static guchar f5tls_zeros[F5TLS_ZEROS_LEN]; /*-----------------------------------------------------------------------*/ /** Get a null terminated hexstring of a byte array * * @param scope scope of the wmem allocate buffer * @param ba The byte aray to convert to a hexstring * @param ba_len Number of bytes to convert * @return Null terminated gchar* wmem allocated - no need to free */ static gchar * f5eth_bytes_to_hexstrnz(wmem_allocator_t *scope, const guchar *ba, gint ba_len) { gchar *hexstr; gchar *end; hexstr = (gchar *)wmem_alloc(scope, ba_len * 2 + 1); end = bytes_to_hexstr(hexstr, ba, ba_len); *end = '\0'; return hexstr; } /* f5eth_bytes_to_hexstrnz */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Create a keylog entry and add it to the packet info * * Keylog entries will be created as described in the tls dissector. * packet-tls-utils.c: tls_keylog_process_lines() * * @param keylog_type Type of keylog record to generate * @param xxxx First crypto element in for keylog record (see above) * @param yyyy Second crypto element in the keylog record (see above) * @return Null terminated keylog record wmem allocated with file scope */ static gchar * f5eth_add_tls_keylog(packet_info *pinfo, keylog_t keylog_type, f5tls_element_t *xxxx, f5tls_element_t *yyyy) { gchar *xxxx_hex; gchar *yyyy_hex; xxxx_hex = f5eth_bytes_to_hexstrnz(pinfo->pool, xxxx->data, xxxx->len); yyyy_hex = f5eth_bytes_to_hexstrnz(pinfo->pool, yyyy->data, yyyy->len); switch (keylog_type) { case CLIENT_RANDOM: return wmem_strdup_printf(wmem_file_scope(), "CLIENT_RANDOM %s %s", xxxx_hex, yyyy_hex); case CLIENT_TRAFFIC_SECRET_0: return wmem_strdup_printf( wmem_file_scope(), "CLIENT_TRAFFIC_SECRET_0 %s %s", xxxx_hex, yyyy_hex); case SERVER_TRAFFIC_SECRET_0: return wmem_strdup_printf( wmem_file_scope(), "SERVER_TRAFFIC_SECRET_0 %s %s", xxxx_hex, yyyy_hex); case CLIENT_HANDSHAKE_TRAFFIC_SECRET: return wmem_strdup_printf( wmem_file_scope(), "CLIENT_HANDSHAKE_TRAFFIC_SECRET %s %s", xxxx_hex, yyyy_hex); case SERVER_HANDSHAKE_TRAFFIC_SECRET: return wmem_strdup_printf( wmem_file_scope(), "SERVER_HANDSHAKE_TRAFFIC_SECRET %s %s", xxxx_hex, yyyy_hex); case EARLY_TRAFFIC_SECRET: return wmem_strdup_printf( wmem_file_scope(), "CLIENT_EARLY_TRAFFIC_SECRET %s %s", xxxx_hex, yyyy_hex); default: DISSECTOR_ASSERT_NOT_REACHED(); } } /* f5eth_add_tls_keylog() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Process the data entries * * @param element Pointer to crypto element * @param pinfo Packet info pointer (unused) * @param tvb tvb * @param offset Offset into the tvb to pull the entry * @param len Length of byte string to convert from the tvb * @return Is the entry different than previously seen */ static gboolean f5eth_add_tls_element( f5tls_element_t *element, packet_info *pinfo _U_, tvbuff_t *tvb, guint offset, gint len) { if (element == NULL || len <= 0 || tvb_memeql(tvb, offset, f5tls_zeros, len) == 0) { /* Nothing to do */ return FALSE; } if (element->len == len && tvb_memeql(tvb, offset, element->data, len) == 0) { /* unchanged */ return FALSE; } /* Populate the element structure */ element->data = (guchar *)wmem_realloc(wmem_file_scope(), element->data, len); element->len = len; tvb_memcpy(tvb, element->data, offset, len); return TRUE; } /* f5eth_add_tls_element() */ /*----------------------------------------------------------------------*/ /** TLS <= 1.2 trailer - Type 0 * * @param tvb The tvbuff containing the DPT TLV block (header and data). * @param pinfo The pinfo structure for the frame. * @param tree The tree to render the DPT TLV under. * @param data Structure pointing to conversation and packet proto data. * @return Number of bytes decoded. */ static int dissect_dpt_trailer_tls_type0(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { proto_item *pi; gint len; gint ver; gint o; f5tls_conversation_data_t *conv_data = NULL; f5tls_packet_data_t *pdata = NULL; len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); ver = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); switch (ver) { case 0: /* Create a subtree and render a header */ pi = proto_tree_add_item(tree, hf_f5tls_tls, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5tls_std); render_f5dptv1_tlvhdr(tvb, tree, 0); o = F5_DPT_V1_TLV_HDR_LEN; /* Add our fields */ proto_tree_add_item(tree, hf_f5tls_mstr_sec, tvb, o, F5TLS_SECRET_LEN, ENC_NA); o += F5TLS_SECRET_LEN; proto_tree_add_item(tree, hf_f5tls_clnt_rand, tvb, o, F5TLS_RANDOM_LEN, ENC_NA); o += F5TLS_RANDOM_LEN; proto_tree_add_item(tree, hf_f5tls_srvr_rand, tvb, o, F5TLS_RANDOM_LEN, ENC_NA); /* o += F5TLS_RANDOM_LEN; */ if (!pref_generate_keylog || data == NULL) { break; } pdata = ((f5tls_data_t *)data)->pkt; conv_data = ((f5tls_data_t *)data)->conv; /* If this is our first pass through, add protocol data and build keylog entries. Assume that by the time the master secret is processed, the client random is available on the conversation data. */ if (!pinfo->fd->visited) { gboolean ms_changed; ms_changed = f5eth_add_tls_element( &conv_data->master_secret, pinfo, tvb, F5_DPT_V1_TLV_HDR_LEN, F5TLS_SECRET_LEN); f5eth_add_tls_element(&conv_data->client_random, pinfo, tvb, F5_DPT_V1_TLV_HDR_LEN + F5TLS_SECRET_LEN, F5TLS_RANDOM_LEN); if (conv_data->client_random.len != 0 && ms_changed) { pdata->cr_ms = f5eth_add_tls_keylog(pinfo, CLIENT_RANDOM, &conv_data->client_random, &conv_data->master_secret); } } /* Display any keylog entries we have in our packet data */ if (pdata->cr_ms != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_ms); proto_item_set_generated(pi); } break; default: /* Unknown version */ len = 0; break; } return len; } /* dissect_dpt_trailer_tls_type0() */ /*----------------------------------------------------------------------*/ /** TLS 1.3 trailer - Type 2 * * @param tvb The tvbuff containing the DPT TLV block (header and data). * @param pinfo The pinfo structure for the frame. * @param tree The tree to render the DPT TLV under. * @param data Structure pointing to conversation and packet proto data. * @return Number of bytes decoded. */ static int dissect_dpt_trailer_tls_type2(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data) { proto_item *pi; gint len; gint ver; gint o; gint secret_len; f5tls_conversation_data_t *conv_data = NULL; f5tls_packet_data_t *pdata = NULL; len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); ver = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); switch (ver) { case 0: case 1: /* Create a subtree and render a header */ pi = proto_tree_add_item(tree, hf_f5tls_tls, tvb, 0, len, ENC_NA); tree = proto_item_add_subtree(pi, ett_f5tls_std); render_f5dptv1_tlvhdr(tvb, tree, 0); o = F5_DPT_V1_TLV_HDR_LEN; secret_len = tvb_get_guint8(tvb, o); /* Add our fields */ pi = proto_tree_add_item(tree, hf_f5tls_secret_len, tvb, o, 1, ENC_NA); o += 1; if (secret_len == 0) { /* nothing to render */ break; /* switch (ver) */ } else if (secret_len > F5TLS_HASH_LEN) { expert_add_info(pinfo, pi, &ei_f5eth_badlen); break; /* switch (ver) */ } else { if (ver == 1) { proto_tree_add_item(tree, hf_f5tls_early_traffic_sec, tvb, o, secret_len, ENC_NA); o += F5TLS_HASH_LEN; } else if (ver == 0 && len == F5TLS_T2V1_LEN) { o += F5TLS_HASH_LEN; } proto_tree_add_item(tree, hf_f5tls_clnt_hs_sec, tvb, o, secret_len, ENC_NA); o += F5TLS_HASH_LEN; proto_tree_add_item(tree, hf_f5tls_srvr_hs_sec, tvb, o, secret_len, ENC_NA); o += F5TLS_HASH_LEN; proto_tree_add_item(tree, hf_f5tls_clnt_app_sec, tvb, o, secret_len, ENC_NA); o += F5TLS_HASH_LEN; proto_tree_add_item(tree, hf_f5tls_srvr_app_sec, tvb, o, secret_len, ENC_NA); o += F5TLS_HASH_LEN; proto_tree_add_item(tree, hf_f5tls_clnt_rand, tvb, o, F5TLS_RANDOM_LEN, ENC_NA); o += F5TLS_RANDOM_LEN; proto_tree_add_item(tree, hf_f5tls_srvr_rand, tvb, o, F5TLS_RANDOM_LEN, ENC_NA); /* o += F5TLS_RANDOM_LEN; */ } if (!pref_generate_keylog || data == NULL) { break; } pdata = ((f5tls_data_t *)data)->pkt; conv_data = ((f5tls_data_t *)data)->conv; /* If this is our first pass through, add protocol data and build keylog entries. Assume that if a CRand exists on the conversation that it is the one that matches up with the newly set / changed secret. */ if (!pinfo->fd->visited) { gboolean ets_changed = FALSE; gboolean chs_changed = FALSE; gboolean shs_changed = FALSE; gboolean cap_changed = FALSE; gboolean sap_changed = FALSE; o = F5_DPT_V1_TLV_HDR_LEN + 1; if (ver == 1) { ets_changed = f5eth_add_tls_element(&conv_data->erly_traf_sec, pinfo, tvb, o, secret_len); o += F5TLS_HASH_LEN; } else if (ver == 0 && len == F5TLS_T2V1_LEN) { o += F5TLS_HASH_LEN; } chs_changed = f5eth_add_tls_element(&conv_data->clnt_hs_sec, pinfo, tvb, o, secret_len); o += F5TLS_HASH_LEN; shs_changed = f5eth_add_tls_element(&conv_data->srvr_hs_sec, pinfo, tvb, o, secret_len); o += F5TLS_HASH_LEN; cap_changed = f5eth_add_tls_element(&conv_data->clnt_ap_sec, pinfo, tvb, o, secret_len); o += F5TLS_HASH_LEN; sap_changed = f5eth_add_tls_element(&conv_data->srvr_ap_sec, pinfo, tvb, o, secret_len); o += F5TLS_HASH_LEN; f5eth_add_tls_element(&conv_data->client_random, pinfo, tvb, o, F5TLS_RANDOM_LEN); if (conv_data->client_random.len != 0) { if (ver == 1 && ets_changed) { pdata->cr_erly_traff = f5eth_add_tls_keylog(pinfo, EARLY_TRAFFIC_SECRET, &conv_data->client_random, &conv_data->erly_traf_sec); } if (cap_changed) { pdata->cr_clnt_app = f5eth_add_tls_keylog(pinfo, CLIENT_TRAFFIC_SECRET_0, &conv_data->client_random, &conv_data->clnt_ap_sec); } if (sap_changed) { pdata->cr_srvr_app = f5eth_add_tls_keylog(pinfo, SERVER_TRAFFIC_SECRET_0, &conv_data->client_random, &conv_data->srvr_ap_sec); } if (chs_changed) { pdata->cr_clnt_hs = f5eth_add_tls_keylog(pinfo, CLIENT_HANDSHAKE_TRAFFIC_SECRET, &conv_data->client_random, &conv_data->clnt_hs_sec); } if (shs_changed) { pdata->cr_srvr_hs = f5eth_add_tls_keylog(pinfo, SERVER_HANDSHAKE_TRAFFIC_SECRET, &conv_data->client_random, &conv_data->srvr_hs_sec); } } } /* Display any keylog entries we have in our packet data */ if (pdata->cr_erly_traff != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_erly_traff); proto_item_set_generated(pi); } if (pdata->cr_clnt_app != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_clnt_app); proto_item_set_generated(pi); } if (pdata->cr_srvr_app != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_srvr_app); proto_item_set_generated(pi); } if (pdata->cr_clnt_hs != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_clnt_hs); proto_item_set_generated(pi); } if (pdata->cr_srvr_hs != NULL) { pi = proto_tree_add_string(tree, hf_f5tls_keylog, tvb, 0, 0, pdata->cr_srvr_hs); proto_item_set_generated(pi); } break; default: /* Unknown version */ len = 0; break; } return len; } /* dissect_dpt_trailer_tls_type2() */ /*----------------------------------------------------------------------*/ /** TLS extended trailer - Types 1 and 3 * * Render as - No dissection * * @param tvb The tvbuff containing the DPT TLV block (header and data). * @param pinfo The pinfo structure for the frame (unused). * @param tree The tree to render the DPT TLV under. * @param data Data passed (unused). * @return Number of bytes decoded. */ static int dissect_dpt_trailer_tls_extended( tvbuff_t *tvb, packet_info *pinfo _U_, proto_tree *tree, void *data _U_) { proto_item *pi; gint len; len = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_LENGTH_OFF); /* Create a subtree and render a header */ pi = proto_tree_add_item(tree, hf_f5tls_tls, tvb, 0, len, ENC_NA); proto_item_append_text(pi, ", Extended Info"); tree = proto_item_add_subtree(pi, ett_f5tls_ext); render_f5dptv1_tlvhdr(tvb, tree, 0); proto_tree_add_item( tree, hf_data, tvb, F5_DPT_V1_TLV_HDR_LEN, len - F5_DPT_V1_TLV_HDR_LEN, ENC_NA); return len; } /* dissect_dpt_trailer_tls_extended() */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Dissector for the TLS DPT provider * * @param tvb The tvbuff containing the DPT TLV block (header and data). * @param pinfo The pinfo structure for the frame. * @param tree The tree to render the DPT TLV under. * @param data Data passed (tap data) (unused). * @return The length as read from the TLV header. * */ static int dissect_dpt_trailer_tls(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { guint32 pattern; conversation_t *conv = NULL; f5tls_data_t *tls_data = NULL; /* We only need the conversation to bring data parts together that arrive on different frames. After the first pass, the keylog entries are stored on the individual packet's data */ if (pref_generate_keylog) { tls_data = wmem_new0(pinfo->pool, f5tls_data_t); if (!pinfo->fd->visited) { conv = find_or_create_conversation(pinfo); tls_data->conv = (f5tls_conversation_data_t *)conversation_get_proto_data( conv, proto_f5ethtrailer_dpt_tls); if (tls_data->conv == NULL) { tls_data->conv = wmem_new0(wmem_file_scope(), f5tls_conversation_data_t); conversation_add_proto_data(conv, proto_f5ethtrailer_dpt_tls, tls_data->conv); } } tls_data->pkt = (f5tls_packet_data_t *)p_get_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer_dpt_tls, 0); if (tls_data->pkt == NULL) { tls_data->pkt = wmem_new0(wmem_file_scope(), f5tls_packet_data_t); p_add_proto_data( wmem_file_scope(), pinfo, proto_f5ethtrailer_dpt_tls, 0, tls_data->pkt); } } /* Combine 2 byte TYPE with 2 byte VERSION into guint32 for the subdissector table lookup */ pattern = tvb_get_ntohs(tvb, F5_DPT_V1_TLV_TYPE_OFF) << 16 | tvb_get_ntohs(tvb, F5_DPT_V1_TLV_VERSION_OFF); return ( dissector_try_uint_new(tls_subdissector_table, pattern, tvb, pinfo, tree, FALSE, tls_data)); } /* dissect_f5dpt_tls() */ /*-----------------------------------------------------------------------------------------------*/ /* End DPT TLS Provider */ /*-----------------------------------------------------------------------------------------------*/ /** * @brief Initialization routine called before first pass through a capture. * */ static void proto_init_f5ethtrailer(void) { /** Need to set display_slot to TRUE when initially reading a capture. This covers the * situation when a user loads a capture that turns off slot display and then loads a * different capture that contains trailers, but does not have the F5INFO frame. In this * case, we need to turn the slot display back on. */ display_slot = TRUE; /* Set the info column function to use based on whether or not an in/out only * preference is chosen. */ switch (pref_info_type) { case in_out_only: case brief_in_out_only: f5eth_set_info_col = f5eth_set_info_col_inout; break; default: f5eth_set_info_col = f5eth_set_info_col_slot; break; } /* If we are doing analysis, enable the tap listeners */ if (pref_perform_analysis) { GString *error_string; error_string = register_tap_listener( "ip", &tap_ip_enabled, NULL, TL_REQUIRES_NOTHING, NULL, ip_tap_pkt, NULL, NULL); if (error_string) { ws_warning("Unable to register tap \"ip\" for f5ethtrailer: %s", error_string->str); g_string_free(error_string, TRUE); } else { tap_ip_enabled = TRUE; } error_string = register_tap_listener( "ipv6", &tap_ipv6_enabled, NULL, TL_REQUIRES_NOTHING, NULL, ipv6_tap_pkt, NULL, NULL); if (error_string) { ws_warning("Unable to register tap \"ipv6\" for f5ethtrailer: %s", error_string->str); g_string_free(error_string, TRUE); } else { tap_ipv6_enabled = TRUE; } error_string = register_tap_listener( "tcp", &tap_tcp_enabled, NULL, TL_REQUIRES_NOTHING, NULL, tcp_tap_pkt, NULL, NULL); if (error_string) { ws_warning("Unable to register tap \"tcp\" for f5ethtrailer: %s", error_string->str); g_string_free(error_string, TRUE); } else { tap_tcp_enabled = TRUE; } } } /** * @brief Cleanup after closing a capture file. * */ static void f5ethtrailer_cleanup(void) { if (tap_tcp_enabled) { remove_tap_listener(&tap_tcp_enabled); tap_tcp_enabled = FALSE; } if (tap_ipv6_enabled) { remove_tap_listener(&tap_ipv6_enabled); tap_ipv6_enabled = FALSE; } if (tap_ip_enabled) { remove_tap_listener(&tap_ip_enabled); tap_ip_enabled = FALSE; } } /** * @brief Sets up the format strings to use for the Info column * */ static void f5ethtrailer_prefs(void) { wmem_free(NULL, info_format_in_only); wmem_free(NULL, info_format_out_only); wmem_free(NULL, info_format_in_slot); wmem_free(NULL, info_format_out_slot); wmem_free(NULL, info_format_in_noslot); wmem_free(NULL, info_format_out_noslot); /* Set the set of format specifier strings to use based on whether or not one of the * brief preferences is chosen */ switch (pref_info_type) { case brief: case brief_in_out_only: if (pref_brief_inout_chars != NULL && strlen(pref_brief_inout_chars) >= 2) { info_format_in_only = wmem_strdup_printf(NULL, "%c: ", pref_brief_inout_chars[0]); info_format_out_only = wmem_strdup_printf(NULL, "%c: ", pref_brief_inout_chars[1]); info_format_in_slot = wmem_strdup_printf(NULL, "%c%%u/%%-2u: ", pref_brief_inout_chars[0]); info_format_out_slot = wmem_strdup_printf(NULL, "%c%%u/%%-2u: ", pref_brief_inout_chars[1]); info_format_in_noslot = wmem_strdup_printf(NULL, "%ct%%-2u: ", pref_brief_inout_chars[0]); info_format_out_noslot = wmem_strdup_printf(NULL, "%ct%%-2u: ", pref_brief_inout_chars[1]); } else { info_format_in_only = wmem_strdup(NULL, ">: "); info_format_out_only = wmem_strdup(NULL, "<: "); info_format_in_slot = wmem_strdup(NULL, ">%u/%-2u: "); info_format_out_slot = wmem_strdup(NULL, "<%u/%-2u: "); info_format_in_noslot = wmem_strdup(NULL, ">t%-2u: "); info_format_out_noslot = wmem_strdup(NULL, "S/T (for in) or <\" ('>' for in" " and '<' for out). If this is not set or is less than two" " characters, the default is used. If it is longer than two" " characters, the extra characters are ignored.", &pref_brief_inout_chars); prefs_register_string_preference(f5ethtrailer_module, "slots_regex", "Only display slot information for platforms", "If the platform in the F5 FILEINFO packet matches the provided regex," " slot information will be displayed in the info column; otherwise, it" " will not. A reasonable value is \"^(A.*|Z101)$\". If the regex is" " empty or there is no platform information in the capture, slot" " information is always displayed.", &pref_slots_regex); prefs_register_bool_preference(f5ethtrailer_module, "rstcause_in_info", "Add RST cause string to info", "If present, include the RST cause text from the trailer in the " "\"info\" column of the packet list pane.", &rstcause_in_info); prefs_register_bool_preference(f5ethtrailer_module, "generate_keylog", "Generate KEYLOG records from TLS f5ethtrailer", "If enabled, KEYLOG entries will be added to the TLS decode" " in the f5ethtrailer protocol tree. It will populate the" " f5ethtrailer.tls.keylog field.", &pref_generate_keylog); register_init_routine(proto_init_f5ethtrailer); register_cleanup_routine(f5ethtrailer_cleanup); /* Register dissector table for additional providers */ provider_subdissector_table = register_dissector_table("f5ethtrailer.provider", "F5 Ethernet trailer provider", proto_f5ethtrailer, FT_UINT16, BASE_DEC); proto_f5ethtrailer_dpt_noise = proto_register_protocol_in_name_only("F5 Ethernet trailer provider - Noise", "Noise", "f5ethtrailer.provider.noise", proto_f5ethtrailer, FT_BYTES); noise_subdissector_table = register_dissector_table("f5ethtrailer.noise_type_ver", "F5 Ethernet Trailer Noise", proto_f5ethtrailer, FT_UINT32, BASE_DEC); proto_f5ethtrailer_dpt_tls = proto_register_protocol_in_name_only("F5 Ethernet Trailer Protocol - TLS Provider", "F5 TLS", "f5ethtrailer.tls", proto_f5ethtrailer, FT_BYTES); tls_subdissector_table = register_dissector_table("f5ethtrailer.tls_type_ver", "F5 Ethernet Trailer TLS", proto_f5ethtrailer, FT_UINT32, BASE_DEC); f5dpt_noise_handle = register_dissector("f5ethtrailer.noise", dissect_dpt_trailer_noise, proto_f5ethtrailer_dpt_noise); f5dpt_tls_handle = register_dissector("f5ethtrailer.tls", dissect_dpt_trailer_tls, proto_f5ethtrailer_dpt_tls); /* Analyze Menu Items */ register_conversation_filter("f5ethtrailer", "F5 TCP", f5_tcp_conv_valid, f5_tcp_conv_filter, NULL); register_conversation_filter("f5ethtrailer", "F5 UDP", f5_udp_conv_valid, f5_udp_conv_filter, NULL); register_conversation_filter("f5ethtrailer", "F5 IP", f5_ip_conv_valid, f5_ip_conv_filter, NULL); /* Register the f5ethtrailer tap for statistics */ tap_f5ethtrailer = register_tap("f5ethtrailer"); stats_tree_register_plugin("f5ethtrailer", "f5_tmm_dist", st_str_tmmdist, (ST_SORT_COL_NAME << ST_FLG_SRTCOL_SHIFT), f5eth_tmmdist_stats_tree_packet, f5eth_tmmdist_stats_tree_init, NULL); stats_tree_register_plugin("f5ethtrailer", "f5_virt_dist", st_str_virtdist, (ST_SORT_COL_NAME << ST_FLG_SRTCOL_SHIFT), f5eth_virtdist_stats_tree_packet, f5eth_virtdist_stats_tree_init, NULL); /* Setup col info strings */ f5ethtrailer_prefs(); } /* proto_register_f5ethtrailer() */ /** * @brief f5ethtrailer Dissector handoff function * */ void proto_reg_handoff_f5ethtrailer(void) { heur_dissector_add("eth.trailer", dissect_f5ethtrailer, "F5 Ethernet Trailer", "f5ethtrailer", proto_f5ethtrailer, HEURISTIC_ENABLE); /* Register helper dissectors */ /* Noise Provider */ dissector_add_uint("f5ethtrailer.provider", F5_DPT_PROVIDER_NOISE, f5dpt_noise_handle); dissector_add_uint("f5ethtrailer.noise_type_ver", F5TYPE_LOW << 16 | 2, create_dissector_handle(dissect_dpt_trailer_noise_low, proto_f5ethtrailer_dpt_noise)); dissector_add_uint("f5ethtrailer.noise_type_ver", F5TYPE_LOW << 16 | 3, create_dissector_handle(dissect_dpt_trailer_noise_low, proto_f5ethtrailer_dpt_noise)); dissector_add_uint("f5ethtrailer.noise_type_ver", F5TYPE_LOW << 16 | 4, create_dissector_handle(dissect_dpt_trailer_noise_low, proto_f5ethtrailer_dpt_noise)); dissector_add_uint("f5ethtrailer.noise_type_ver", F5TYPE_MED << 16 | 4, create_dissector_handle(dissect_dpt_trailer_noise_med, proto_f5ethtrailer_dpt_noise)); dissector_add_uint("f5ethtrailer.noise_type_ver", F5TYPE_HIGH << 16 | 1, create_dissector_handle(dissect_dpt_trailer_noise_high, proto_f5ethtrailer_dpt_noise)); /* TLS provider */ dissector_add_uint("f5ethtrailer.provider", F5_DPT_PROVIDER_TLS, f5dpt_tls_handle); dissector_add_uint("f5ethtrailer.tls_type_ver", F5_DPT_TLS_PRE13_STD << 16 | 0, create_dissector_handle(dissect_dpt_trailer_tls_type0, proto_f5ethtrailer_dpt_tls)); dissector_add_uint("f5ethtrailer.tls_type_ver", F5_DPT_TLS_PRE13_EXT << 16 | 0, create_dissector_handle(dissect_dpt_trailer_tls_extended, proto_f5ethtrailer_dpt_tls)); dissector_add_uint("f5ethtrailer.tls_type_ver", F5_DPT_TLS_13_STD << 16 | 0, create_dissector_handle(dissect_dpt_trailer_tls_type2, proto_f5ethtrailer_dpt_tls)); dissector_add_uint("f5ethtrailer.tls_type_ver", F5_DPT_TLS_13_STD << 16 | 1, create_dissector_handle(dissect_dpt_trailer_tls_type2, proto_f5ethtrailer_dpt_tls)); dissector_add_uint("f5ethtrailer.tls_type_ver", F5_DPT_TLS_13_EXT << 16 | 0, create_dissector_handle(dissect_dpt_trailer_tls_extended, proto_f5ethtrailer_dpt_tls)); /* These fields are duplicates of other, well-known fields so that * filtering on these fields will also pick up data out of the * trailers. */ hf_ip_ipaddr = proto_registrar_get_id_byname("ip.addr"); hf_ip6_ip6addr = proto_registrar_get_id_byname("ipv6.addr"); hf_tcp_tcpport = proto_registrar_get_id_byname("tcp.port"); hf_udp_udpport = proto_registrar_get_id_byname("udp.port"); } /*===============================================================================================*/ /* This section is rendering the F5 tcpdump file properties packet. * * Note that this should technically have a protocol tree item, but it does not. The data * rendered by this dissector should be the only data in the packet. So, rather than requiring * the user to select the packet and expand the tree to view it, putting the items into the top * tree essentially renders them expanded. There is no proto_tree_expand_item() sort of call that * can be used to do this in a data-encapsulated manner (it can be hacked, but I opted for this * method instead). */ /* Platform ID to platform name mapping * * https://my.f5.com/manage/s/article/K9476 * https://my.f5.com/manage/s/article/K86001294 */ static const string_string f5info_platform_strings[] = { /* rSeries */ {"C128", "F5 r10000 Series (r10600, r10800, r10900)"}, {"C129", "F5 r5000 Series (r5600, r5800, r5900)"}, {"C130", "F5 r2000 Series (r2600, r2800)"}, {"C131", "F5 r4000 Series (r4600, r4800)"}, /* iSeries */ {"C115", "BIG-IP i4000 Series (i4600, i4800)"}, {"C116", "BIG-IP i10000 Series (i10600, i10800)"}, {"C117", "BIG-IP i2000 Series (i2600, i2800), BIG-IP i850)"}, {"C118", "BIG-IP i7000 Series (i7600, i7800)"}, {"C119", "BIG-IP i5000 Series (i5600, i5800)"}, {"C123", "BIG-IP i11600, i11800"}, {"C124", "BIG-IP i11400-DS, i11600-DS, i11800-DS"}, {"C125", "BIG-IP i5820-DF"}, {"C126", "BIG-IP i7820-DF"}, {"D116", "BIG-IP i15000 Series (i15600, i15800)"}, {"D120", "BIG-IP i15820-DF"}, /* Standard series */ {"C102", "BIG-IP 1600"}, {"C103", "BIG-IP 3600"}, {"C106", "BIG-IP 3900, Enterprise Manager 4000"}, {"C109", "BIG-IP 5000s, 5050s, 5200v, 5250v, 5250v-F"}, {"C112", "BIG-IP 2000 Series (2000s, 2200s)"}, {"C113", "BIG-IP 4000 Series (4000s, 4200v)"}, {"C114", "BIG-IP 800 (LTM only)"}, {"D104", "BIG-IP 6900 Series (6900, 6900S, 6900F, 6900N)"}, {"D106", "BIG-IP 8900"}, {"D107", "BIG-IP 8950"}, {"D110", "BIG-IP 7000 Series (7000s, 7050s, 7055s, 7200v, 7250v, 7255v), BIG-IQ 7000"}, {"D111", "BIG-IP 12000 Series (12250v)"}, {"D112", "BIG-IP 10050 Series (10150s-NEBS, 10350v (AC), 10350v-NEBS, 10350v-FIPS)"}, {"D113", "BIG-IP 10000 Series (10000s, 10050s, 10055, 10200v, 10250v, 10255)"}, {"E101", "BIG-IP 11000, BIG-IP 11000 FIPS"}, {"E102", "BIG-IP 11050, 11050 NEBS"}, {"E103", "BIG-IP 11050N"}, /* VIPRION */ {"A100", "VIPRION B4100 Blade"}, {"A105", "VIPRION B4100N Blade"}, {"A107", "VIPRION B4200 Blade"}, {"A108", "VIPRION B4300 Blade"}, {"A109", "VIPRION B2100 Blade"}, {"A110", "VIPRION B4340N Blade"}, {"A111", "VIPRION B4200N Blade"}, {"A112", "VIPRION B2250 Blade"}, {"A113", "VIPRION B2150 Blade"}, {"A114", "VIPRION B4450 Blade"}, /* Herculon */ {"C120", "Herculon i2800"}, {"C121", "Herculon i5800"}, {"C122", "Herculon i10800"}, /* Virtualized platforms*/ {"Z100", "BIG-IP Virtual Edition (VE)"}, {"Z101", "BIG-IP vCMP Guest"}, {NULL, NULL} }; /* It currently looks like these do not apply. Kept for completeness only */ #if 0 {"C21", "FirePass 1200"}, {"D46", "FirePass 4100"}, {"D63", "BIG-IP 6400-NEBS"}, {"D101", "FirePass 4300"}, {"D114", "VIPRION C2200 Chassis"}, {"F100", "VIPRION C2400 Chassis"}, {"F101", "VELOS CX410 Chassis"}, {"J100", "VIPRION C4400 Chassis"}, {"J101", "VIPRION C4400N Chassis"}, {"J102", "VIPRION C4480 Chassis"}, {"J103", "VIPRION C4480N Chassis"}, {"S100", "VIPRION C4800 Chassis"}, {"S101", "VIPRION C4800N Chassis"}, #endif /** * @brief Dissector for rendering the F5 tcpdump file properties packet. * * This is a heuristic dissector because the Ethernet dissector has a hook * to pass packets to a dissector before it gets rendered as Ethernet and * that seems to make sense here. This could be a registered dissector on * the Ethertype 0x5ff, but this way it can skip a packet and let other * dissectors have a chance to dissect (and the Ethernet dissector does not * waste its time rendering Ethernet information for no reason). * * TODO: This should return gint with how many bytes were consumed. * * @param tvb Pointer to tvb * @param pinfo Pointer to packet info * @param tree Pointer to protocol tree * @param data Pointer to data structure (unused) * @return gboolean */ static gboolean dissect_f5fileinfo(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void *data _U_) { guint offset = 0; const guint8 *object; const gchar *platform = NULL; const gchar *platform_name = NULL; gint objlen; struct f5fileinfo_tap_data *tap_data; /* Must be the first packet */ if (pinfo->fd->num > 1) return FALSE; if (tvb_captured_length(tvb) >= (gint)sizeof(fileinfomagic1)) { if (tvb_memeql(tvb, 0, fileinfomagic1, sizeof(fileinfomagic1)) == 0) offset = sizeof(fileinfomagic1); } /* Didn't find the magic at the start of the packet. */ if (offset == 0) return FALSE; col_set_str(pinfo->cinfo, COL_PROTOCOL, "FILEINFO"); tap_data = wmem_new0(pinfo->pool, struct f5fileinfo_tap_data); tap_data->magic = F5FILEINFO_TAP_MAGIC; while (tvb_captured_length_remaining(tvb, offset)) { object = tvb_get_stringz_enc(pinfo->pool, tvb, offset, &objlen, ENC_ASCII); if (objlen <= 0 || object == NULL) break; if (strncmp(object, "CMD: ", 5) == 0) { proto_tree_add_string(tree, hf_fi_command, tvb, offset + 5, objlen - 5, &object[5]); col_add_str(pinfo->cinfo, COL_INFO, &object[5]); } else if (strncmp(object, "VER: ", 5) == 0) { guint i; const guint8 *c; proto_tree_add_string(tree, hf_fi_version, tvb, offset + 5, objlen - 5, &object[5]); for (c = object; *c && (*c < '0' || *c > '9'); c++); for (i = 0; i < 6 && *c; c++) { if (*c < '0' || *c > '9') { i++; continue; } tap_data->ver[i] = (tap_data->ver[i] * 10) + (*c - '0'); } } else if (strncmp(object, "HOST: ", 6) == 0) proto_tree_add_string(tree, hf_fi_hostname, tvb, offset + 6, objlen - 6, &object[6]); else if (strncmp(object, "PLAT: ", 6) == 0) { proto_tree_add_string(tree, hf_fi_platform, tvb, offset + 6, objlen - 6, &object[6]); platform = &object[6]; platform_name = str_to_str(platform, f5info_platform_strings, "Unknown, please report"); proto_tree_add_string_format(tree, hf_fi_platformname, tvb, offset + 6, objlen - 6, platform_name, "%s: %s", platform, platform_name); } else if (strncmp(object, "PROD: ", 6) == 0) proto_tree_add_string(tree, hf_fi_product, tvb, offset + 6, objlen - 6, &object[6]); else if (strncmp(object, "SESS: ", 6) == 0) proto_tree_add_string(tree, hf_fi_session, tvb, offset + 6, objlen - 6, &object[6]); offset += objlen; } tvb_set_reported_length(tvb, offset); tap_queue_packet(tap_f5fileinfo, pinfo, tap_data); f5eth_process_f5info(platform); return TRUE; } /* dissect_f5fileinfo() */ /** * @brief F5FILEINFO protocol dissector registration * */ void proto_register_f5fileinfo(void) { static hf_register_info hf[] = { { &hf_fi_command, { "Tcpdump command line", "f5fileinfo.cmdline", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_version, { "Platform version", "f5fileinfo.version", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_hostname, { "Hostname", "f5fileinfo.hostname", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_platform, { "Platform", "f5fileinfo.platform", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_platformname, { "Platform name", "f5fileinfo.platformname", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_product, { "Platform product", "f5fileinfo.product", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, { &hf_fi_session, { "Session", "f5fileinfo.session", FT_STRINGZ, BASE_NONE, NULL, 0x0, NULL, HFILL } }, }; proto_f5fileinfo = proto_register_protocol("F5 Capture Information", "FILEINFO", "f5fileinfo"); proto_register_field_array(proto_f5fileinfo, hf, array_length(hf)); tap_f5fileinfo = register_tap("f5fileinfo"); } /** * @brief F5FILEINFO dissector handoff * */ void proto_reg_handoff_f5fileinfo(void) { heur_dissector_add("eth", dissect_f5fileinfo, "F5 Capture Information", "f5fileinfo", proto_f5fileinfo, HEURISTIC_ENABLE); } /* * Editor modelines - https://www.wireshark.org/tools/modelines.html * * Local variables: * c-basic-offset: 4 * tab-width: 8 * indent-tabs-mode: nil * End: * * vi: set shiftwidth=4 tabstop=8 expandtab: * :indentSize=4:tabSize=8:noTabs=true: */