Age | Commit message (Collapse) | Author | Files | Lines |
|
rather than requiring individual capture file type handlers to do it
(unless they're doing per-packet encapsulation, in which case we check
to make sure they didn't *leave* it as WTAP_ENCAP_PER_PACKET).
svn path=/trunk/; revision=10290
|
|
it, similar to the Ethernet pseudo-header's "fcs_len" field, and use it
in the 802.11 dissector.
svn path=/trunk/; revision=9884
|
|
svn path=/trunk/; revision=9857
|
|
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
|
|
bytes of extra stuff at the end of the packet or not are the same as for
Ethernet and 802.11.
svn path=/trunk/; revision=9728
|
|
svn path=/trunk/; revision=9558
|
|
0 means "there is no FCS in the packet data", 4 means "there is an FCS
in the packet data", -1 means "I don't know whether there's an FCS in
the packet data, guess based on the packet size".
Assume that Ethernet encapsulated inside other protocols has no FCS, by
having the "eth" dissector assume that (and not check for an Ethernet
pseudo-header).
Have "ethertype()" take an argument giving the FCS size; pass 0 when
appropriate.
Fix up Wiretap routines to set the pseudo-header. This means we no
longer use the "generic" seek-and-read routine, so get rid of it.
svn path=/trunk/; revision=8574
|
|
differences between versions 002.001 and 002.002.
svn path=/trunk/; revision=8563
|
|
the network type being 1 and the byte after it being 2; we assume, for
now, that the network type is 1 byte, and that if the byte after it is
0, the network type is an NDIS type - 1, and if it's 2, it's an NDIS type.
svn path=/trunk/; revision=7973
|
|
aren't 1/1193000.0 second; the code used to use 1/1193180.0 second, but
at least one capture appears to have units of somewhere around
1/3579540.0 second.
svn path=/trunk/; revision=7388
|
|
2 the time stamps are in units of 1/31250000 seconds rather than
nanoseconds - and, by generating Windows Sniffer captures with various
hdr.timeunit values, that for all the non-zero values he tested, the
time stamps for non-gigabit pod captures are in units of 1/1193000
second.
Instead of having a TpS array, just test for the exception value (0 for
non-gigabit pod captures, 2 for gigabit pod captures).
svn path=/trunk/; revision=7380
|
|
svn path=/trunk/; revision=7267
|
|
Add a bunch of capture types discovered by stuffing them into Windows
Sniffer captures and seeing what a Sniffer thought they were. Add
support for writing at least some of them.
svn path=/trunk/; revision=7265
|
|
it's a gigabit Ethernet capture, possibly, with special hardware, and
that time stamps have 1000 times the resolution that they have in other
captures (perhaps due to the special hardware having a higher-resolution
clock?).
svn path=/trunk/; revision=7240
|
|
that have direction information.
Support writing WTAP_ENCAP_FRELAY_WITH_PHDR and WTAP_ENCAP_PPP_WITH_PHDR
captures out in libpcap format - we throw away the direction
information, but so it goes.
When reading/writing Windows Sniffer format, read and write the
direction flag.
svn path=/trunk/; revision=7052
|
|
svn path=/trunk/; revision=7048
|
|
that flag in the ATM pseudo-header, and use it to determine whether a
frame is a raw cell or a reassembled frame, rather than using the AAL,
as you can have raw AAL5 cells in a capture.
svn path=/trunk/; revision=6889
|
|
number of 1 means DCE->DTE, in DOS Sniffer ATM captures.
svn path=/trunk/; revision=6881
|
|
The Windows Sniffer does *not* appear to know the difference between
802.3 and 802.3 multicast LANE traffic.
svn path=/trunk/; revision=6870
|
|
and traffic type.
svn path=/trunk/; revision=6868
|
|
bottommost bit of the 12th byte of "hdr.hdr_2_x.xxx".
svn path=/trunk/; revision=6866
|
|
svn path=/trunk/; revision=6865
|
|
number.
Put in some commented-out code to deal with some end-of-packet crud in
some ISDN captures - not all ISDN captures have it, so we can't
unconditionally slice it out.
svn path=/trunk/; revision=6863
|
|
svn path=/trunk/; revision=6843
|
|
svn path=/trunk/; revision=6842
|
|
header that specify the detailed capture type for WAN captures; use
those fields.
svn path=/trunk/; revision=6841
|
|
used for the DOS-based ATM Sniffer. (That's not a great name, but I
couldn't think of a better one.)
Add a new WTAP_ENCAP_ATM_PDUS_UNTRUNCATED encapsulation type for capture
files where reassembled frames don't have trailers, such as the AAL5
trailer, chopped off. That's what at least some versions of the
Windows-based ATM Sniffer appear to have.
Map the ATM capture file type for NetXRay captures to
WTAP_ENCAP_ATM_PDUS_UNTRUNCATED, and put in stuff to fill in what we've
reverse-engineered, so far, for the pseudo-header; there's more that
needs to be done on it, e.g. getting the channel, AAL type, and traffic
type (or inferring them if they're not in the packet header).
svn path=/trunk/; revision=6840
|
|
something hidden in the per-packet header for ATM captures that
specifies the traffic type (and stuff such as that).
svn path=/trunk/; revision=6839
|
|
WTAP_ENCAP_ISDN encapsulation type, which includes a pseudo-header
giving the direction (user-to-network or network-to-user) and the
channel number.
Add a new circuit type, using the ISDN channel number as the circuit ID.
Add an ISDN dissector to put the direction and channel number into the
protocol tree and to call the appropriate dissector for the payload
based on the channel (LAPD for the D channel; V.120, PPP, or data for B
channels, based on some heuristics).
svn path=/trunk/; revision=6521
|
|
unknown bytes might actually be 32-bit fields.
The field after the upper 32 bits of the time stamp of the capture start
appears to be the speed of the network, in bits/second.
Put in a field for the rest of the file header, as a bunch of 32-bit
values (most fields are 32 bits, and all of them might be, in that
header), for use when reverse-engineering.
At least in version 002.x of NetXRay-format captures, WAN captures might
be ISDN captures; treat all WAN version 002.x captures as ISDN captures
for now, until we see some captures where that's wrong (and thus stand a
chance of figuring out where in the file header it indicates what type
of capture it is).
svn path=/trunk/; revision=6519
|
|
look like Ethernet captures.
svn path=/trunk/; revision=6474
|
|
winapi_cleanup tool written by Patrik Stridvall for the wine
project.
svn path=/trunk/; revision=6115
|
|
All files:
- Replace types from sys/types.h by those from glib.h
- Replace ntoh family of macros from netinet/in.h and winsock2.h
by g_ntoh family from glib.h
- Remove now unneeded includes of sys/types.h, netinet/in.h and
winsock2.h
wtap.h
Move includes to the top
svn path=/trunk/; revision=5909
|
|
Allow "-" as the output file name in Wiretap, referring to the
standard error.
Optimize the capture loop.
Fix some of the error-message printing code in Ethereal and Tethereal.
Have Wiretap check whether it can seek on a file descriptor, and pass
the results of that test to the file-type-specific "open for output"
routine. Have the "open for output" routines for files where we need to
seek when writing the file return an error if seeks don't work.
svn path=/trunk/; revision=5884
|
|
the internal z_err value for the stream if an "fseek()" call it makes
fails, so that if "gzerror()" is subsequently called, it returns Z_OK
rather than an error.
To work around this, we pass "file_seek()" an "int *err", and have the
with-zlib version of "file_seek()" check, if "gzseek()" fails, whether
the return value of "file_error()" is 0 and, if so, have it return
"errno" instead.
svn path=/trunk/; revision=5642
|
|
svn path=/trunk/; revision=5576
|
|
"err" argument is null and return an error code through that argument
only if it isn't, to match what "wtap_dump_close()", which calls those
routines, does.
Put the NetXRay dump routines in order by version number.
svn path=/trunk/; revision=5385
|
|
captures, from Olivier Abad.
svn path=/trunk/; revision=5202
|
|
returns radio information such as signal strength, channel, and data
rate in a pseudo-header. Add that pseudo-header.
Use the "802.11 with radio information" encapsulation type for Wireless
Sniffer files; extract the radio information from where it appears to be
in the header.
Add dissector code for that encapsulation type.
Fix an error in the code to put radio information into the AiroPeek
tree.
Make the "wrapped" flag for NetXRay/Windows Sniffer captures a
"gboolean".
svn path=/trunk/; revision=5122
|
|
svn path=/trunk/; revision=5119
|
|
in the comment.
svn path=/trunk/; revision=5108
|
|
Read in the entire packet, including the padding, and just tell our
caller about the non-padding part; that avoids doing a "file_seek()"
("fseek()"s are inefficient on some platforms, as they flush the
standard I/O buffers and do an "lseek()"), and would also let us supply
the padding to the caller if it turns out it's an FCS rather than
padding.
svn path=/trunk/; revision=5107
|
|
svn path=/trunk/; revision=5106
|
|
For file types where we allocate private data, add "close" routines
where they were missing, to free the private data. Also fix up the code
to clean up after some errors by freeing private data where that wasn't
being done.
Get rid of unused arguments to "wtap_dump_open_finish()".
Fix indentation.
svn path=/trunk/; revision=4857
|
|
scripts, and check in changes to add _U_ to some unused arguments (some
other should perhaps be used, so we leave the _U_ out so that the
warnings serve as a reminder to check those).
svn path=/trunk/; revision=4847
|
|
non-existent functions.
Remove the "filetype" argument from the "can_write_encap" functions for
particular capture file types - the argument value is implicit, in that
the routine being called is the routine for that particular file type.
svn path=/trunk/; revision=4823
|
|
reading the capture file. Have callers of "wtap_snapshot_length()"
treat a value of 0 as "unknown", and default to WTAP_MAX_PACKET_SIZE (so
that, when writing a capture file in a format that *does* store the
snapshot length, we can at least put *something* in the file).
If we don't know the snapshot length of the current capture file, don't
display a value in the summary window.
Don't use "cfile.snap" as the snapshot length option when capturing -
doing so causes Ethereal to default, when capturing, to the snapshot
length of the last capture file that you read in, rather than to the
snapshot length of the last capture you did (or the initial default of
"no snapshot length").
Redo the "Capture Options" dialog box to group options into sections
with frames around them, and add units to the snapshot length, maximum
file size, and capture duration options, as per a suggestion by Ulf
Lamping. Also add units to the capture count option.
Make the snapshot length, capture count, maximum file size, and capture
duration options into a combination of a check box and a spin button.
If the check box is not checked, the limit in question is inactive
(snapshot length of 65535, no max packet count, no max file size, no max
capture duration); if it's checked, the spinbox specifies the limit.
Default all of the check boxes to "not checked" and all of the spin
boxes to small values.
Use "gtk_toggle_button_get_active()" rather than directly fetching the
state of a check box.
svn path=/trunk/; revision=4709
|
|
svn path=/trunk/; revision=4199
|
|
svn path=/trunk/; revision=4077
|
|
can handle capture files bigger than 2GB.
svn path=/trunk/; revision=3993
|