Age | Commit message (Collapse) | Author | Files | Lines |
|
Set the file encapsulation the same way it's done for iptrace captures -
leave it as "unknown" to start with, and, for each packet we see, set it
to the packet's encapsulation type if the file encapsulation type is
unknown and set it to "per-packet" if the file encapsulation type is
"known" but isn't the type of that packet, so files that have all the
same type of packet have that type as the file type and packets that
*don't* have all the same type of packet have "per-packet".
svn path=/trunk/; revision=10543
|
|
nettl files.
svn path=/trunk/; revision=10501
|
|
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
|
|
0 means "there is no FCS in the packet data", 4 means "there is an FCS
in the packet data", -1 means "I don't know whether there's an FCS in
the packet data, guess based on the packet size".
Assume that Ethernet encapsulated inside other protocols has no FCS, by
having the "eth" dissector assume that (and not check for an Ethernet
pseudo-header).
Have "ethertype()" take an argument giving the FCS size; pass 0 when
appropriate.
Fix up Wiretap routines to set the pseudo-header. This means we no
longer use the "generic" seek-and-read routine, so get rid of it.
svn path=/trunk/; revision=8574
|
|
Following fixes for nettl (HP-UX):
1) Fixed 11.X timestamp issue
there is no difference in 10.X/11.X timestamps, so no
need to shift 11.X timestamps
2) Fixed NS_LS_DRIVER trace record handling
now works rather than throwing "...network type that
Ethereal doesn't support" error
3) Fixed handling of traces with sliced packets (nettl -m xx)
now uses correct packet and capture lengths
4) Additional ethernet card support
now handles btlan[1,3-6],gelan,igelan,intl100 driver
trace records
svn path=/trunk/; revision=7642
|
|
winapi_cleanup tool written by Patrik Stridvall for the wine
project.
svn path=/trunk/; revision=6115
|
|
All files:
- Replace types from sys/types.h by those from glib.h
- Replace ntoh family of macros from netinet/in.h and winsock2.h
by g_ntoh family from glib.h
- Remove now unneeded includes of sys/types.h, netinet/in.h and
winsock2.h
wtap.h
Move includes to the top
svn path=/trunk/; revision=5909
|
|
the internal z_err value for the stream if an "fseek()" call it makes
fails, so that if "gzerror()" is subsequently called, it returns Z_OK
rather than an error.
To work around this, we pass "file_seek()" an "int *err", and have the
with-zlib version of "file_seek()" check, if "gzseek()" fails, whether
the return value of "file_error()" is 0 and, if so, have it return
"errno" instead.
svn path=/trunk/; revision=5642
|
|
Added support for NS_LS_TCP, NS_LS_UDP, NS_LS_LOOPBACK, NS_LS_ICMP and
unnamed subsystem 0xb9 (which contains ethernet headers in my captures frames).
However, NS_LS_ICMP will not be dissected since we dont have a
RAW_ICMP wiretap encapsulation type.
Updated decoding of usec timestamp for HPUX11 since HPUX11 has 0.1us
resolution for the scalar in this field.
YMMV but all these ones works for me from nettl traces from HPUX11.
svn path=/trunk/; revision=5523
|
|
It works for such captures containing 100baseT captures. It may explode on
other link types.
svn path=/trunk/; revision=5496
|
|
"struct x25_phdr" to "wiretap/wtap.h".
Have two X.25 dissectors, one of which assumes that there's a "struct
x25_phdr" pseudo-header and one of which doesn't; the former uses the
information in that pseudo-header to determine whether the packet is
DTE->DCE or DCE->DTE, and the latter assumes it has no clue whether the
packet is DTE->DCE or DCE->TDE. Use the former one in the LAPB
dissector, and the latter one in the XOT dissector and in the LLC
dissector table.
In the X.25-over-TCP dissector, handle multiple X.25 packets per TCP
segment, and handle X.25 packets split across TCP segments.
svn path=/trunk/; revision=5134
|
|
"wtap_read()".
Add some additional error checks to the Sniffer file reader.
svn path=/trunk/; revision=4875
|
|
an "err" argument that points to an "int" into which to put an error
code if it fails.
Check for errors in one call to it, and note that we should do so in
other places.
In the "wtap_seek_read()" call in the TCP graphing code, don't overwrite
"cfile.pseudo_header", and make the buffer into which we read the data
WTAP_MAX_PACKET_SIZE bytes, as it should be.
In some of the file readers for text files, check for errors from the
"parse the record header" and "parse the hex dump" routines when reading
sequentially.
In "csids_seek_read()", fix some calls to "file_error()" to check the
error on the random stream (that being what we're reading).
svn path=/trunk/; revision=4874
|
|
For file types where we allocate private data, add "close" routines
where they were missing, to free the private data. Also fix up the code
to clean up after some errors by freeing private data where that wasn't
being done.
Get rid of unused arguments to "wtap_dump_open_finish()".
Fix indentation.
svn path=/trunk/; revision=4857
|
|
reading the capture file. Have callers of "wtap_snapshot_length()"
treat a value of 0 as "unknown", and default to WTAP_MAX_PACKET_SIZE (so
that, when writing a capture file in a format that *does* store the
snapshot length, we can at least put *something* in the file).
If we don't know the snapshot length of the current capture file, don't
display a value in the summary window.
Don't use "cfile.snap" as the snapshot length option when capturing -
doing so causes Ethereal to default, when capturing, to the snapshot
length of the last capture file that you read in, rather than to the
snapshot length of the last capture you did (or the initial default of
"no snapshot length").
Redo the "Capture Options" dialog box to group options into sections
with frames around them, and add units to the snapshot length, maximum
file size, and capture duration options, as per a suggestion by Ulf
Lamping. Also add units to the capture count option.
Make the snapshot length, capture count, maximum file size, and capture
duration options into a combination of a check box and a spin button.
If the check box is not checked, the limit in question is inactive
(snapshot length of 65535, no max packet count, no max file size, no max
capture duration); if it's checked, the spinbox specifies the limit.
Default all of the check boxes to "not checked" and all of the spin
boxes to small values.
Use "gtk_toggle_button_get_active()" rather than directly fetching the
state of a check box.
svn path=/trunk/; revision=4709
|
|
svn path=/trunk/; revision=4199
|
|
can handle capture files bigger than 2GB.
svn path=/trunk/; revision=3993
|
|
beginning of the file before reading anything from the file is bogus -
do that in the loop that tries each of the open routines, instead.
(They may have to reset the seek pointer later if, for example, the
capture file begins with the first packet, and the "open()" routine
looks at that packet to try to guess whether the packet is in the file
format in question.)
Set "wth->data_offset" to 0 while you're at it, so capture file readers
don't have to do that, either.
svn path=/trunk/; revision=3123
|
|
svn path=/trunk/; revision=2654
|
|
svn path=/trunk/; revision=2640
|
|
a "keep reading" boolean value is returned from the function.
This avoids having to hack around the fact that some file formats truly
do have records that start at offset 0. (i4btrace and csids have no
file header. Neither does the pppdump-style file that I'm looking at right now).
svn path=/trunk/; revision=2392
|
|
every C file. I noticed this because of a build break of csids.obj on
Win32.
svn path=/trunk/; revision=2378
|
|
pointers and arrays in a number of places, to remove warnings some
compilers give.
svn path=/trunk/; revision=2160
|
|
to that file, leave public definitions in wtap.h.
Rename "union pseudo_header" to "union wtap_pseudo_header".
Make the wtap_pseudo_header pointer available in packet_info struct.
svn path=/trunk/; revision=1989
|
|
"FILE_T" is either a "gzFile" or a "FILE *", depending on whether zlib
support is enabled or not). Fix various function declarations and
definitions.
svn path=/trunk/; revision=1984
|
|
there's no need to keep it around in memory - when the frame data is
read in when handing a frame, read in the information, if any, necessary
to reconstruct the frame header, and reconstruct it. This saves some
memory.
This requires that the seek-and-read function be implemented inside
Wiretap, and that the Wiretap handle remain open even after we've
finished reading the file sequentially.
This also points out that we can't really do X.25-over-Ethernet
correctly, as we don't know where the direction (DTE->DCE or DCE->DTE)
flag is stored; it's not clear how the Ethernet type 0x0805 for X.25
Layer 3 is supposed to be handled in any case. We eliminate
X.25-over-Ethernet support (until we find out what we're supposed to
do).
svn path=/trunk/; revision=1975
|
|
and nettl captures - a "start" field is used for capture files where the
time stamps on packets are relative to some initial time stamp, e.g. the
time the capture started, but those file formats use absolute time
stamps, so no "start" field is needed.
Make the "this is an HP-UX 11.x nettl capture" flag a member of the
private data structure for a nettl capture, rather than a global - it's
per-capture-file state.
Once the "start" field is removed from the RADCOM private data
structure, there's nothing left, so eliminate the private data
structure.
svn path=/trunk/; revision=1863
|
|
from the frame table - Network Monitor 2.x, at least, doesn't always
write frame N+1 right after frame N.
To do that, we need to mallocate a big array to hold the frame table,
and free it when we close the capture file; this requires that we have
capture-file-type-specific close routines as well as
capture-file-type-specific read routines - we let it the pointer to that
routine be null if it's not needed. Given that, we might as well get
rid of the switch statement in "wtap_close()", in favor of using
capture-file-type-specific close routines, as per the comment before
that switch statement.
svn path=/trunk/; revision=1740
|
|
and 10 files). Add OS version detection to handle this.
svn path=/trunk/; revision=1675
|
|
"g_message()" message, as other capture-file readers do.
svn path=/trunk/; revision=1648
|
|
Update the nettl section in wiretap/README, and give sample commands to
make captures on HP-UX.
svn path=/trunk/; revision=1642
|
|
forwarding e-mail address.
svn path=/trunk/; revision=1522
|
|
Check for both "magic numbers".
svn path=/trunk/; revision=1512
|
|
hideous problem on FreeBSD 3.[23] (and perhaps other BSDs) if
HAVE_UNISTD_H is defined before "zlib.h" is included, turn "file_seek()"
into a subroutine defined in a file that *undefines* HAVE_UNISTD_H
before including "zlib.h", so that the *only* call to "gzseek()" is made
from a file that does not have HAVE_UNISTD_H defined when it includes
"zlib.h".
Move "file_error()" to that file while you're at it, so it holds all the
wrappers that hide the presence or absence of zlib from routines to read
capture files.
Turn "file.h", which declared those wrapper functions as well as wrapper
macros, into "file_wrapper.h" - it belongs with the "file_wrapper.c"
file that defines the wrapper functions, not with "file.c" which handles
higher-layer file access functions.
Remove the comment in "configure.in" that explained why defining
HAVE_UNISTD_H was a bad idea, as we're not obliged to define it and work
around the problem. (The comment in "file_wrapper.c" explains the
workaround.)
svn path=/trunk/; revision=1463
|
|
Fix the error checking ("file_error()" returns an "errno" value *if*
there's an error and it's a UNIX error, but it may also return a
non-"errno" value for non-UNIX errors, so its return value should be
passed back through the "err" pointer).
svn path=/trunk/; revision=954
|
|
more display filters for X.25;
no LCN in X.25 RESTART / DIAGNOSTIC / REGISTRATION packets;
support for nettl file format (nettl is a trace tool for HP-UX).
For now, it only supports traces for X.25 interfaces (tested
with HP-UX 10.20).
svn path=/trunk/; revision=879
|