Age | Commit message (Collapse) | Author | Files | Lines |
|
Autotools has the very useful feature by design of allowing the user
to override the default build flags (you break it you keep it).
Apparently CMake applies COMPILE_OPTIONS target property after
CMAKE_{C,CXX}_FLAGS so that doesn't work here. Prepend our flags to those
variables instead to make it work then.
Specific target flag overrides can still be added with COMPILER_OPTIONS
(e.g: generated files with -Wno-warning) but this is less effective and
then we're back at the point where this overrides user flags. It's less
of a concern though.
Change-Id: I44761a79be4289238e02d4e781fef0099628817b
Reviewed-on: https://code.wireshark.org/review/23675
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Since dissectors are now populating the timestamp of the seq_analysis_item_t
structure within the tap function, don't have the sequence_anaylsis redo it
when writing an ASCII file. This removes the need for the capture_file
parameter and simplifies the logic a bit.
Also just have GUI register the tap itself. It will provide for some more
flexibility in the future.
Change-Id: I55b2f951b977ea70ac9f7eb4929245b0779e5f0e
Reviewed-on: https://code.wireshark.org/review/23650
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
An extcap utility can provide configuration for controls to use in a
GUI interface toolbar. This controls are bidirectional and can be
used to control the extcap utility while capturing.
This is useful in scenarios where configuration can be done based on
findings in the capture process, setting temporary values or give other
inputs without restarting current capture.
Todo:
- Add support for Windows
Change-Id: Ie15fa67f92eb27d8b73df6bb36f66b9a7d81932d
Reviewed-on: https://code.wireshark.org/review/19982
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
|
|
Packet ranges are used only in the UI; move the packet range stuff into
libui.
Don't pass a print_args_t structure to libwireshark packet-printing
routines, just pass the few parameters they need. Move the declaration
of print_args_t into file.h.
Change-Id: Icff5991eea7d7d56f33b4716105895263d275bcf
Reviewed-on: https://code.wireshark.org/review/21308
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
These are similar to the routines added to ui/alert_box.c for dialog-box
libwiretap error reporting.
This centralizes the knowledge about what to say for various libwiretap
errors, removing some duplicate code, and giving more details in some
programs.
Change-Id: I737405c4edaa0e6c27840f78a8c587a8b3ee120b
Reviewed-on: https://code.wireshark.org/review/21234
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
It doesn't belong in libwireshark, as it doesn't affect dissection, but
it *does* belong in libui, as it's helper code for the UIs.
Change-Id: I8a5e0640a299a08e9ec1917dd253197438ebfdbc
Reviewed-on: https://code.wireshark.org/review/20974
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
A new "--export-object <protocol>,<destdir>" option is added to tshark.
This required refactoring Export Object behavior in all GUIs to give the
export object handling to the dissector, rather than the ui layer.
Included in the refactoring was fixing some serious memory leaks in Qt
Export Object dialog, crash due to memory scope issues in GTK Export
Object dialog, and addition sorting column feature in Qt dialog (set
up by creating a widget to manage the items that were previously
leaking memory)
Bug: 9319
Ping-Bug: 13174
Change-Id: I515d7662fa1f150f672b1476716f347ec27deb9b
Reviewed-on: https://code.wireshark.org/review/18927
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: Ia56b38a770a148dd8bf030699615189601944cc2
Reviewed-on: https://code.wireshark.org/review/18656
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Have them handle -d, -t, --disable-protocol, --disable-heuristic, and
--enable-heuristic for TShark and both flavors of Wireshark.
Change-Id: I612c276b1f9df8a2092202d23ab3d48be7857e85
Reviewed-on: https://code.wireshark.org/review/18583
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Instead of checking for the boolean "FALSE", just set an empty string.
This avoids the need to check for WERROR_COMMON_FLAGS before using it.
The transformation is the same for all files, remove
"if (WERROR_COMMON_FLAGS)" and "endif()", reindent and add quotes (since
we have a string here and not a list).
Modelines have been added where missing.
Change-Id: I0ab05ae507c51fa77336d49a99a226399cc81b92
Reviewed-on: https://code.wireshark.org/review/17997
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
|
|
Setting our compiler warning flags in CMAKE_C_FLAGS does not allow
using different flags per target.
Allow for that possibility by setting the internal WS_WARNINGS_{C,CXX}_FLAGS
and using the COMPILE_OPTIONS property to set them.
This change is just setting mechanism and there should be no difference
in generated warnings.
The check_X_compiler_flag cmake test is changed to test each flag individually.
We need a list, not a space separated string, and the aggregate test is not
significant.
Change-Id: I59fc5cd7e130c7a5e001c598e3df3e13f83a6a25
Reviewed-on: https://code.wireshark.org/review/17150
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Both GTK and Qt both use the same command-line options, so refactor
the parsing and (possibly) applying of those arguments to a single
location.
Ping-Bug: 12546
Change-Id: Ib31e576c509c5d3d21c33d3247640d9f9c68661b
Reviewed-on: https://code.wireshark.org/review/16006
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Add the Firewall ACL Rules dialog. Try showing all valid rules for a
given product instead of making the user select from a combobox. We can
add the combo back easily enough if that's desired.
Add a rule hint field and use it in the Qt and GTK+ UIs.
Bug: 12469
Change-Id: I39dd840e9838f96d7c5e2b4c34662811c21d0386
Reviewed-on: https://code.wireshark.org/review/15689
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
This patch introduces the "-U tap_name[,filter]" tshark option and
is similar to the "Export PDUs as file" option in Wireshark.
Wireshark implements this feature by reopening a capture file, applying
a tap and finally opening the temporary file. Since tshark knows
in advance that a PDU export is needed, it can optimize by not creating
the temporary file and perform the export at the first opportunity.
This patch splits the opening/tapping functionality from error reporting
since tshark does not need a temp file and has no dialogs.
The capture file comment is now specified explicitly as there is no
"current file" anymore if the tap is running without active file.
TODO:
- Review whether it is acceptable to overwrite save_file in tshark.
- Add documentation (tshark manpage).
Bug: 3444
Change-Id: Ie159495d42c32c2ba7400f2991b7b8185b3fda09
Reviewed-on: https://code.wireshark.org/review/5890
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
This generates a top level target, checkAPI, that is
excluded from the ALL build target, so must be run separately.
On Windows using a Visual Studio generator, call
msbuild /p:Configuration=RelWithDebInfo checkAPI.vcxproj
Change-Id: I44a57c564dcfc75499463b942436f4b920a82478
Reviewed-on: https://code.wireshark.org/review/14873
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
|
|
GUI from CLI
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Adding Follow HTTP Stream justified some refactoring and code removal.
Change-Id: I9b7ace83f8517e880e78193bb97ac32e3fc91114
Reviewed-on: https://code.wireshark.org/review/13015
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: I723dcd9bb99941332d1340150361a4a11803fcbb
Reviewed-on: https://code.wireshark.org/review/11871
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Add "/WX" to the Visual C++ compiler flags if DISABLE_WERROR is off,
similar to config.nmake.
We haven't compiled C++ code with -Wshorten-64-to-32 for quite
some time so there's no need to add -Wno-shorten-64-to-32 in
ui/qt/CMakeLists.txt.
Additionally, squelch
----
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3050) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3065) : see reference to function template instantiation 'void std::_Median<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3127) : see reference to function template instantiation 'std::pair<_RanIt,_RanIt> std::_Unguarded_partition<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3157) : see reference to function template instantiation 'void std::_Sort<_Iter,int,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Diff,_Pr)' being compiled
with
[
_Iter=QList<QString>::iterator
, _RanIt=QList<QString>::iterator
, _Diff=int
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
.\rpc_service_response_time_dialog.cpp(130) : see reference to function template instantiation 'void std::sort<QList<QString>::iterator,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3051) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3052) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3053) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
----
in both rpc_service_response_time_dialog.cpp and wireshark_application.cpp
so that we'll compile successfully.
Change-Id: I457bcede99dcb1f3c1001f1f559c4901bb000357
Reviewed-on: https://code.wireshark.org/review/10533
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Change-Id: Ic5f2c353ae1f787ac19cb575a938cb093ff5f6dc
Reviewed-on: https://code.wireshark.org/review/10930
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
|
|
Move decode_rtp_packet to ui/rtp_media.[ch].
Change-Id: Ib138781c37ac17b807bf75f9d772351aadf72071
Reviewed-on: https://code.wireshark.org/review/10575
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Rename ui/gtk/iax2_analysis.h to ui/tap-iax2-analysis.h. Move
iax2_packet_analyse to ui/tap-iax2-analysis.c.
Rename rtp_analysis.h to tap-rtp-analysis.h to match IAX2.
Change-Id: Ice7e9ad0d7bf62d631850089c880ec09a3e101dd
Reviewed-on: https://code.wireshark.org/review/10375
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Very similar to the refactoring of SRT stats, it provides more commonality of the stats for all GUI interfaces. Currently implemented for TShark and GTK. Affected dissectors: MEGACO, MGCP, Radius
Change-Id: Icb73a7e603dc3502b39bf696227fcaae37d4ed21
Reviewed-on: https://code.wireshark.org/review/8998
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Preparation to add Multicast Stream Dialog on Qt (Add extern C...)
Change-Id: Ic8bc39a18dba607d6da116df799de7847ce8e4c8
Reviewed-on: https://code.wireshark.org/review/6984
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Add keyboard shortcuts. Note that not all of the buttons made it from
GTK+. Add a "Go to setup frame" option.
Move rtp_streams.c from ui/gtk to ui.
Add a help URL for RTP analysis (which needs to be split into streams +
analysis).
Fix RTP stream packet marking.
Change-Id: Ifb8192ff701a933422509233d76461a46e459f4f
Reviewed-on: https://code.wireshark.org/review/6852
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Move voip_calls.[ch] to ui. Add callbacks to voip_calls_tapinfo_t.
Remove unused function definitions.
Change-Id: Ib12db7053d53afa81ef2a66dc0cfe681bc624dd2
Reviewed-on: https://code.wireshark.org/review/5379
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
- get language as soon as possible (before creating any Qt objects) to make all
translations working
- dynamic list of supported languages
- runtime change of GUI language (no need to restart application)
- add flags icons support
- search for *.qm languages in buildin resources, then
data dir called "languages" (main directory in sources or
/usr/share/wireshark/languages), then user directory
(UNIX: ~/.wireshark/languages); "languages" directory should contains
files wireshark_xx.qm where xx is language code (en, en_GB, etc.),
and optional xx.svg for flag icon
- try to fix some untranslated manually-created UI items
(need manual reset text of those components)
Change-Id: I62ca8a8cddce47cec9dbcad6b0bd68b6cfd92229
Reviewed-on: https://code.wireshark.org/review/5041
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
|
|
Change-Id: I8e554a8e17399d78b0ef29dfb68109a219cd9f1b
Reviewed-on: https://code.wireshark.org/review/4294
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Create a TrafficTableDialog (for lack of a better name) parent class
from the general parts of ConversationDialog. Use it to create
EndpointsDialog.
Move the contents of conversation_tree_widget.{cpp,h} to
conversation_dialog.{cpp,h} to match endpoint_dialog and
traffic_table_dialog.
Fill in GeoIP columns dynamically instead of using a hard-coded limit.
Use "endp_" and "ENDP_" prefixes for a lot of endpoint variables and
defines.
Try to make geoip_db_lookup_ipv4 and geoip_db_lookup_ipv6 more robust.
Clean up some includes. Fix a shadowed variable.
Change-Id: I23054816ac7f8c6edb3b1f01c8536db37ba4122d
Reviewed-on: https://code.wireshark.org/review/3462
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Refactor (non-GUI) conversation table functionality from gtk/Qt to epan. Also refactor "common GUI" conversation table functionality.
The idea is to not have to modify the GUI when a dissector adds a new "conversation type"
Change-Id: I11f08d0d7edd631218663ba4b902c4a4c849acda
Reviewed-on: https://code.wireshark.org/review/3113
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Items are sorted by value.
Move common conversation code to ui/conversation_hash.[ch]. Add a
conversation_type_e enum along with convenience functions for fetching
titles, tap names, etc.
We have a single main dialog instead of a main dialog + individual
protocol dialogs. It de-clutters the statistics menu and results in
simpler code. Conversation type tabs can be added and removed within the
dialog itself. The tab list is sticky and saved with the current profile
when the dialog closes. Data can be copied as CSV or YAML.
Add a FilterAction class and a corresponding filterAction slot to
MainWindow. Use it for the Conversations context menu.
Add an addressResolutionChanged signal and related plumbing.
Get rid of the iterator members in the conversation item struct. Update
the GTK+ code accordingly.
Excercise for the reader:
- Update TShark to use the common hash code.
Ping-Bug: 9231
Ping-Bug: 8703
Ping-Bug: 6727
Change-Id: I8728d771fc5b1a85937bed9d898e53c3ecc3a544
Reviewed-on: https://code.wireshark.org/review/2987
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: Ic1099927e3fb63c020c622e0a92e99a376908f4e
Reviewed-on: https://code.wireshark.org/review/2737
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: Ib7c0617d88bf92cad0ac877176001d29960f1cd8
Reviewed-on: https://code.wireshark.org/review/2725
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I86e7e781cc9e14abab0374a18b95438529b046f0
Reviewed-on: https://code.wireshark.org/review/2711
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: Id0f3d4d60a1acc7aa64fd3737b8f16df5bca4e5a
Reviewed-on: https://code.wireshark.org/review/2708
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I3be8bef8c7542e7bcb11f3696783ca68c3920082
Reviewed-on: https://code.wireshark.org/review/1987
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
|
|
For each graph you can set:
- Its visibility
- A name
- A display filter
- Color, from a fixed list
- Plot style: Line, Impulse, Bar, Stacked Bar, Dot, Square, Diamond
- Basic Y Axes (packets/s, bytes/s, bits/s)
- Computed Y Axes (SUM, MIN, AVG, MAX)
- Smoothing
You can pan and zoom using the mouse and keyboard. Clicking on a graph
selects the last packet for that interval. If all graphs have the same Y
axis a single label is shown, otherwise a legend is shown.
The time scale (X axis) can be toggled between relative seconds and the
time of day.
Graphs can be saved as PDF, PNG, BMP, and JPEG. Settings are "sticky"
via the io_graphs UAT.
To do:
- Minimize graph drawing delays.
- Figure out why smoothing differs from GTK+
- Everything else at the top of io_graph_dialog.cpp
- Fix empty resets.
A fair amount of code was copied from TCPStreamDialog. We might want to
subclass QCustomPlot and place the shared code there.
Move common syntax checking to SyntaxLineEdit.
Move some common code from ui/gtk/io_stat.c to ui/io_graph_item.[ch] and
use it in both GTK+ and Qt.
Make the io_graph_item_t array allocation in io_stat.c static. The
behavior should be identical and this gives us additional compile-time
checks.
Change-Id: I9a3d544469b7048f0761fdbf7bcf20f44ae76577
Reviewed-on: https://code.wireshark.org/review/435
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
|
|
(Using sed : sed -i '/^\# \$Id\$/,+1 d') (start with dash)
Change-Id: Ia4b5a6c2302f6a531f6a86c1ec3a2f8205c8c2dd
Reviewed-on: https://code.wireshark.org/review/881
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
svn path=/trunk/; revision=54853
|
|
from the GTK flavor in two major ways:
- The "Decode As" and "User Specified Decodes" dialog have been unified.
- You can modify the decode as behavior at any time, not just when you
have a packet selected.
Revert part of 53498 so that we can move items marked
/*** THE FOLLOWING SHOULD NOT BE USED BY ANY DISSECTORS!!! ***/
from epan/decode_as.h to ui/decode_as_utils.h.
Move "save" code from decode_as_dlg.c to decode_as_utils.c as well.
In packet-dcerpc.c don't register a table named "ethertype". We might
want to add checks for duplicate table names.
To do:
- Add support for ranges?
- Either add support for DCERPC or make DCERPC use a regular dissector
table.
- Fix string selectors (i.e. BER).
svn path=/trunk/; revision=53910
|
|
configuration file directory and directory in which to save captures),
have the routine to parse -P options use them, and move that routine to
libui.
Have that routine just return a gboolean.
svn path=/trunk/; revision=53435
|
|
svn path=/trunk/; revision=52945
|
|
Copy common code from ui/gtk/flow_graph.c and ui/gtk/graph_analysis.[ch]
to ui/tap-sequence-analysis.[ch]. Start using the name "sequence" in
places.
svn path=/trunk/; revision=52824
|
|
svn path=/trunk/; revision=52814
|
|
svn path=/trunk/; revision=52812
|
|
using a Visual Studio solution.
Add CMake properties to group the source files in epan into logical blocks when using a Visual Studio solution.
svn path=/trunk/; revision=52580
|
|
Add TCP/UDP/SSL Follow feature to QtShark
Known issue :
* Duplicate code with GTK (function need follow_info_t struct but in GTK there is some GWidget variable in struct)
* Sometimes TCP Follow fail...
svn path=/trunk/; revision=51883
|
|
Add the QCustomPlot widget. Thanks to Emanuel Eichhammer for granting a
license change. Move some common code from ui/gtk/tcp_graph.c to
ui/tap-tcp-stream.[ch]. Get rid of tcp_graph_selected_packet_enabled().
It was only used in the menu code and didn't match what we were doing
elsewhere.
Still quite a bit of work to do but it's a promising start.
svn path=/trunk/; revision=51538
|
|
column. Conversation spans (setup frame to last frame) are shown with a
square bracket. Linked frames are shown with a circle.
Use correct column justifications in Qt. Move common
justification-related packet list code to ui/packet_list_utils.[ch].
Add a last_frame element to conversation_t.
svn path=/trunk/; revision=50447
|