Age | Commit message (Collapse) | Author | Files | Lines |
|
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
|
|
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
|
|
dissect_rpc() could finally disappear.
svn path=/trunk/; revision=2138
|
|
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
|
|
number, and have the protocols encapsulated inside IPX register
themselves with that table.
svn path=/trunk/; revision=2028
|
|
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
|
|
dissector.
Don't dissect the payload of any fragmented IPv6 packet unless it's the
initial fragment (that's what we do for IPv4).
svn path=/trunk/; revision=1882
|
|
destination network-layer addresses of the servers, and the NCP
connection number, and use the pointer to the conversation and the
request sequence number as the hash key for the table of requests used
to find the request for a given response; this lets it work with
NCP-over-TCP and NCP-over-UDP.
Register the NCP dissector with the UDP dissector in the handoff
registration routine for NCP, just as we do with the TCP dissector.
svn path=/trunk/; revision=1878
|
|
svn path=/trunk/; revision=1875
|
|
one another, put the comments that explain what they do in front of
them, and clean up the indentation.
svn path=/trunk/; revision=1874
|
|
protocols that run inside IPv4 register themselves with it using
"dissector_add()".
Make various dissectors static if they can be, and get rid of any header
files that no longer contain any information as a result of that change.
svn path=/trunk/; revision=1870
|
|
checking for them in the UDP dissector.
svn path=/trunk/; revision=1856
|
|
Specific queries and debugging requests may be sent from ports
other than 520, but they are directed to port 520 on the target
machine.
and RFC 2453, on RIP V2, says:
Specific queries may be sent from ports other than the RIP port,
but they must be directed to the RIP port on the target machine.
so there is no requirement that RIP packets have 520 as both source and
destination port numbers. It's therefore OK to register it as the
dissector for UDP port 520 - no need to handle it specially in the UDP
dissector as a reminder to make it check both source and destination
ports - so we do so.
svn path=/trunk/; revision=1855
|
|
but will be in the future, and it's easier for me to keep my local branch
in sync with the source with the calls to dfilter_apply() already modified
tothe 4-arg format.
Add a CPP macro to ipv4.h to define ipv4_addr_ne(). Use it in dfilter.c
svn path=/trunk/; revision=1854
|
|
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
|
|
with conversations and having TCP and UDP check whether a packet is part
of a conversation with a dissector and, if so, using that dissector on
the conversation, and "ethertype()"-style support for allowing a
dissector to call a sub-dissector via the same path that the TCP and UDP
dissectors use, based on port numbers supplied by that dissector.
svn path=/trunk/; revision=1837
|
|
UDP and into the handoff registration routines for the protocols in
question.
Make the dissectors for those protocols static if they're not called
outside the dissector's source file.
Get rid of header files if all they did was declare dissectors that are
now static; remove declarations of now-static dissectors from header
files that do more than just declare the dissector.
svn path=/trunk/; revision=1823
|
|
the plugin list.
svn path=/trunk/; revision=1798
|
|
routine, which calls all routines found in the dissector source files
with names that match " proto_reg_handoff_[a-z_0-9A-Z]*".
Call "register_all_protocol_handoffs()" after calling
"register_all_protocols()" - "register_all_protocols()" needs to be
called first, so that all protocols can register their fields, because
registering a dissector as being called if field "proto.port" is equal
to N requires that "proto.port" be a registered field.
Give DNS a handoff registration routine, and register its dissector to
be called if "udp.port" is UDP_PORT_DNS; remove the registration of DNS
from "packet-udp.c", and make "dissect_dns()" static (as nobody else
need know that it exists).
svn path=/trunk/; revision=1788
|
|
processing (as TFTP does), and don't have comments suggesting that extra
checks are needed, with the port table.
svn path=/trunk/; revision=1786
|
|
pd/offset/fd/tree arguments, looks up the port number in the dissector
table, and:
if it finds it, call the corresponding dissector routine with
the pd/offset/fd/tree arguments, and return TRUE;
if it doesn't find it, return FALSE.
Use that in the TCP and UDP dissectors.
Don't add arbitrary UDP ports for which a dissector is found in the
table as ports that should be dissected as TFTP; this should only be
done if we find a packet going from port XXX to the official TFTP port.
Don't register TFTP in UDP's dissector table, as it has to be handled
specially (i.e., we have to add the source port as a TFTP port, although
we really should register the source port *and* IP address); eventually,
we should move that registration to the TFTP dissector itself, at which
point we can register TFTP normally.
svn path=/trunk/; revision=1785
|
|
hash table attached to "udp.port" out of "init_dissect_udp()" into
"proto_register_udp()", so that it's done the way TCP does it, and then
get rid of "init_dissect_udp()".
svn path=/trunk/; revision=1781
|
|
field, to allow dissectors to register their dissection routine in a
particular field's hash table with a particular "port" value, and to
make the TCP and UDP dissectors support that for their "port" field and
to look up ports in that hash table.
This replaces the hash table that the UDP dissector was using.
There's still more work needed to make this useful - right now, the hash
tables are attached to the protocol field in the register routines for
the TCP and UDP protocols, which means that the register routines for
protocols that run atop TCP and UDP can't use this unless their register
routines happen to be called after those for TCP and/or UDP, and several
other protocols need to attach hash tables to fields, and there's no
single global field for Ethernet types so we can't even attach a hash
table to such a field to allow protocols to register themselves with a
particular Ethertype - but it's a start.
svn path=/trunk/; revision=1779
|
|
proto_tree_add_protocol_format()
proto_tree_add_uint_format()
proto_tree_add_ipxnet_format()
proto_tree_add_ipv4_format()
proto_tree_add_ipv6_format()
proto_tree_add_bytes_format()
proto_tree_add_string_format()
proto_tree_add_ether_format()
proto_tree_add_time_format()
proto_tree_add_double_format()
proto_tree_add_boolean_format()
If using GCC 2.x, we can check the print-format against the variable args
passed in. Regardless of compiler, we can now check at run-time that the
field type passed into the function corresponds to what that function
expects (FT_UINT, FT_BOOLEAN, etc.)
Note that proto_tree_add_protocol_format() does not require a value field,
since the value of a protocol is always NULL. It's more intuitive w/o the
vestigial argument.
Fixed a proto_tree_add_item_format-related bug in packet-isis-hello.c
Fixed a variable usage bug in packet-v120.c. (ett_* was used instead of hf_*)
Checked in Guy's fix for the function declearation for proto_tree_add_text()
and proto_tree_add_notext().
svn path=/trunk/; revision=1713
|
|
This protocol is UDP based and uses ports 58800 and 58801.
svn path=/trunk/; revision=1667
|
|
This change allows you to add a new packet-*.c file and not cause a
recompilation of everything that #include's packet.h
Add the plugin_api.[ch] files ot the plugins/Makefile.am packaging list.
Add #define YY_NO_UNPUT 1 to the lex source so that the yyunput symbol
is not defined, squelching a compiler complaint when compiling the generated
C file.
svn path=/trunk/; revision=1637
|
|
up involving two ports neither of which is the official port; remove the
comment saying a dynamic call is added, as the code wasn't adding such a
call.
svn path=/trunk/; revision=1611
|
|
* fix a bug in packet-tftp.c dissecting TFTP Option Acknowledgement
packets. The is no Block-Id in TFTP Option Acknowledgements, as it is
in TFTP Acknowledgements.
* Extension of manuf by ethernet addresses from ELSA (my company), a german
vendor of ISDN routers, cable modems, etc.
* New dissector for Time Protocol [RFC 0868]. That protocol works on port
37 of UDP and TCP. The implementation in this patch only dissects the
more usual UDP version. It could print the time in a more fashion way,
but thats for a later version.
svn path=/trunk/; revision=1609
|
|
which SNMP traps are sent. Thanks and a tip of the Hatlo Hat to Craig
Rodrigues for discovering this.
svn path=/trunk/; revision=1589
|
|
with MSVC 6.0 and 'nmake', the make tool that comes with MSVC.
It compiles, links, and runs. It doesn't run correctly. There's a problem
when reading files. I'm getting short reads. I'm not linking in zlib or
libsnmp because it first needs to be debugged.
I changed the plugin code to use gmodule instead of libltdl, but the
Unix build still links ethereal against libltdl. I'll fix that tonight; sorry
about leaving it in such a sad state, but I wanted to check in this code
before I left work on a Friday night. Ethereal still works, but the
building is less than optimal.
svn path=/trunk/; revision=1479
|
|
svn path=/trunk/; revision=1433
|
|
In packet_hex_print(), compute (bstart + blen) only once.
In time_secs_to_str(), return a meaningful string when time == 0, instead
of returing pointer to char buffer with old, inappropriate data in it.
svn path=/trunk/; revision=1297
|
|
svn path=/trunk/; revision=1295
|
|
depends on dlopen() being available on the target platform
svn path=/trunk/; revision=1263
|
|
svn path=/trunk/; revision=1234
|
|
there are no SNMP libraries to use in a real dissector; this means that
other dissectors don't have to care if there are SNMP libraries, they
can just call "dissect_snmp()" - and this also simplifies "Makefile.am"
and "configure.in" a bit, as they just treat "packet-snmp.c" and
"packet-snmp.h" the same way they treat other dissector source files.
svn path=/trunk/; revision=1214
|
|
svn path=/trunk/; revision=1191
|
|
svn path=/trunk/; revision=1099
|
|
svn path=/trunk/; revision=1086
|
|
Rename the dissector for the Netware SAP protocol to "dissect_ipxsap()",
so as to keep its name from colliding with that of the dissector for the
Session Announcement Protocol.
svn path=/trunk/; revision=1046
|
|
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
|
|
into "dissect_rpc()" itself; it returns TRUE if it is, FALSE if it
isn't.
svn path=/trunk/; revision=1030
|
|
svn path=/trunk/; revision=945
|
|
svn path=/trunk/; revision=919
|
|
structure to "dl_src"/"dl_dst", "net_src"/"net_dst", and "src"/"dst"
addresses, where an address is an address type, an address length in
bytes, and a pointer to that many bytes.
"dl_{src,dst}" are the link-layer source/destination; "net_{src,dst}"
are the network-layer source/destination; "{src,dst}" are the
source/destination from the highest of those two layers that we have in
the packet.
Add a port type to "packet_info" as well, specifying whether it's a TCP
or UDP port.
Don't set the address and port columns in the dissector functions; just
set the address and port members of the "packet_info" structure. Set
the columns in "fill_in_columns()"; this means that if we're showing
COL_{DEF,RES,UNRES}_SRC" or "COL_{DEF,RES,UNRES}_DST", we only generate
the string from "src" or "dst", we don't generate a string for the
link-layer address and then overwrite it with a string for the
network-layer address (generating those strings costs CPU).
Add support for "conversations", where a "conversation" is (at present)
a source and destination address and a source and destination port. (In
the future, we may support "conversations" above the transport layer,
e.g. a TFTP conversation, where the first packet goes from the client to
the TFTP server port, but the reply comes back from a different port,
and all subsequent packets go between the client address/port and the
server address/new port, or an NFS conversation, which might include
lock manager, status monitor, and mount packets, as well as NFS
packets.)
Currently, all we support is a call that takes the source and
destination address/port pairs, looks them up in a hash table, and:
if nothing is found, creates a new entry in the hash table, and
assigns it a unique 32-bit conversation ID, and returns that
conversation ID;
if an entry is found, returns its conversation ID.
Use that in the SMB and AFS code to keep track of individual SMB or AFS
conversations. We need to match up requests and replies, as, for
certain replies, the operation code for the request to which it's a
reply doesn't show up in the reply - you have to find the request with a
matching transaction ID. Transaction IDs are per-conversation, so the
hash table for requests should include a conversation ID and transaction
ID as the key.
This allows SMB and AFS decoders to handle IPv4 or IPv6 addresses
transparently (and should allow the SMB decoder to handle NetBIOS atop
other protocols as well, if the source and destination address and port
values in the "packet_info" structure are set appropriately).
In the "Follow TCP Connection" code, check to make sure that the
addresses are IPv4 addressses; ultimately, that code should be changed
to use the conversation code instead, which will let it handle IPv6
transparently.
svn path=/trunk/; revision=909
|
|
svn path=/trunk/; revision=894
|
|
svn path=/trunk/; revision=844
|
|
svn path=/trunk/; revision=828
|
|
and RIPng decoding.
svn path=/trunk/; revision=818
|
|
the base for numbers to be displayed in, bitmasks for bitfields, and blurbs
(which are one or two sentences describing the field).
proto_tree_add*() routines now automatically handle bitfields. You tell
it which header field you are adding, and just pass it the value of the
entire field, and the proto_tree routines will do the masking and shifting
for you.
This means that bitfields are more naturally filtered via dfilter now.
Added Phil Techau's support for signed integers in dfilters/proto_tree.
Added the beginning of the SNA dissector. It's not complete, but I'm
committing it now because it has example after example of how to use
bitfields with the new header_field_info struct and proto_tree routines.
It was the impetus to change how header_field_info works.
svn path=/trunk/; revision=815
|