| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
of protocol-id-plus-datum pairs, so that multiple protocols can attach
information to the same conversation.
Dissectors that attach information to a conversation should not assume
that if they find a conversation it has one of its data attached to it;
the conversation might've been created by another dissector.
svn path=/trunk/; revision=3901
|
|
svn path=/trunk/; revision=3899
|
|
"header_field_info" structure, including the ones that are later set by
the routines to register fields.
svn path=/trunk/; revision=3561
|
|
to imply that
1) conversations have source and destination addresses and ports
- they don't (if they did, they'd be monologues, not
conversations), they just have two address/port pairs for the
two endpoints, with one or more of the address or port in the
second pair possibly being wildcarded;
2) the first and second address or port argument to
"find_conversation()" or "try_conversation_dissector()" have
anything to do with the first or second address/port pair in
a conversation - they don't, the two arguments to those
routines are matched against *both* address/port pairs for a
conversation;
as otherwise people might think that they need to add flags to wildcard
the first arguments "conversation_new()" or "find_conversation()" (they
don't, they just have to pass the non-wildcarded address/port first and
then pass the wildcarded one, even if that means passing the destination
first and source second).
svn path=/trunk/; revision=3537
|
|
svn path=/trunk/; revision=3364
|
|
check for disabled protocols or set "pinfo->current_proto", so they have
to do that for themselves.
svn path=/trunk/; revision=3306
|
|
svn path=/trunk/; revision=3304
|
|
Clean up some problems that revealed.
svn path=/trunk/; revision=3301
|
|
variable with a null pointer-to-value and a zero length, so we don't
need to protect the assignment to "variable.val.string" with
"SAFE_STRING()" - and doing so causes complaints from the compiler about
assigning a pointer to a "const gchar" to the non-const pointer
"variable.val.string".
svn path=/trunk/; revision=3267
|
|
the string because the string value is zero-length.
Don't try to treat an agent address in a V1 trap as an IP address if
it's not 4 bytes long.
svn path=/trunk/; revision=3265
|
|
indication into the protocol tree as well as the summary line, so people
don't get confused if, say, doing "tethereal -V".
Pass those routines the subtree for the packet, rather than the
top-level tree, so that the error indication and the item for the rest
of the packet show up there rather than at the top level.
svn path=/trunk/; revision=3264
|
|
and linux.
svn path=/trunk/; revision=3081
|
|
are no entries in any of the MIBs for any of the components of the
variable's OID.
svn path=/trunk/; revision=2961
|
|
svn path=/trunk/; revision=2957
|
|
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
|
|
with not terminating their arrays because they knew the limits of the
value used to look up strings in the value_string array, but the
dfilter_expr_dlg does not know these limits and must rely on the terminating
{0, NULL} record.
Also, in SNA fixed a bug in which a field should have been defined as FT_UINT8
but was defined as FT_BOOLEAN.
In WTP, fixed a value string which had duplicate keys.
svn path=/trunk/; revision=2817
|
|
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
|
|
"asn1_string_value_decode()", as it can be used for various character
string types as well.
Turn "asn1_octet_string_decode()" into "asn1_string_decode()", which
takes an additional argument giving the tag expected for the string in
question, and make "asn1_octet_string_decode()" a wrapper around it.
Clean up the ASN.1 dissection in the Kerberos dissector, making more use
of the code in "asn1.c", wrapping more operations up in macros, and
doing some more type checking.
Use "REP" rather than "RESP" in names and strings; "REP" is what the
Kerberos spec uses.
Make the routines in the Kerberos dissector not used outside that
dissector static.
Fix some problems with the dissection of strings in the Kerberos
dissector (it was extracting the data from the wrong place in the
packet).
In Kerberos V5, the "kvno" item in the EncryptedData type is optional;
treat it as such.
Treat integers as unsigned in the Kerberos dissector.
svn path=/trunk/; revision=2777
|
|
can be put, and a pointer to the string for the column, which might or
might not point to that buffer.
Add a routine "col_set_str()", which sets the string for the column to
the string passed to it as an argument; it should only be handed a
static string (a string constant would be ideal). It doesn't do any
copying, so it's faster than "col_add_str()".
Make the routines that append to columns check whether the pointer to
the string for the column points to the buffer for the column and, if
not, copy the string for the column to the buffer for the column so that
you can append to it (so you can use "col_set_str()" and then use
"col_append_str()" or "col_append_fstr()").
Convert a bunch of "col_add_str()" calls that take a string constant as
an argument to "col_set_str()" calls.
Convert some "col_add_fstr()" calls that take a string constant as the
only argument - i.e., the format string doesn't have any "%" slots into
which to put strings for subsequent arguments to "col_set_str()" calls
(those calls are just like "col_add_str()" calls).
Replace an END_OF_FRAME reference in a tvbuffified dissector with a
"tvb_length(tvb)" call.
svn path=/trunk/; revision=2670
|
|
string formatter, like "format_text()", and, as "tvbuff.c" now calls it
(*vide infra*), we don't want to have to make "tvbuff.c" drag "packet.h"
in just to declare "bytes_to_str()". It's now declared in "strutil.h",
so include it in modules that use "bytes_to_str()" and weren't already
including it.
Add a "tvb_bytes_to_str()" wrapper that calls "tvb_get_ptr()" to get a
pointer to a chunk of N bytes at a given offset in a tvbuff and then
hands that chunk to "bytes_to_str()". Convert the code that was doing
that to use "tvb_bytes_to_str()" instead (which caught what I suspect is
a bug in the Q.2931 dissector, where it was handing an offset of 0 to
"tvb_get_ptr()" - a cut-and-pasteo, I think).
Tvbuffify the ARP dissector.
svn path=/trunk/; revision=2634
|
|
SNMP request would, but an SNMP reply can come back from another port.
Instead, when an SNMP request is seen, create a conversation with a
wildcard port, if one doesn't already exist, and make its dissector the
SNMP dissector.
svn path=/trunk/; revision=2526
|
|
block.
svn path=/trunk/; revision=2446
|
|
objects are reference-counted so that won't make it disappear if
Ethereal is also linked with it as a shared SNMP library.
svn path=/trunk/; revision=2443
|
|
on the systems that have the problem we're working around, the
SNMP shared library is "libsnmp.so.0";
on those systems, there's also no "libsnmp.so" unless the user
has installed the UCD SNMP development package or has made a
symlink from "libsnmp.so" to "libsnmp.so.0" by hand, and we
don't want to force users to do that (some of them may be
sufficiently new to UNIX that they don't know how to do that);
the run-time linker, if told to load "libsnmp.so", won't
necessarily realize that it's the same object as "libsnmp.so.0",
and may load it again rather than using the already-loaded
object, which might not be a good idea.
svn path=/trunk/; revision=2398
|
|
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
|
|
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
|
|
for an SNMP trap PDU.
svn path=/trunk/; revision=2158
|
|
svn path=/trunk/; revision=2157
|
|
for SNMPv2") in SNMPv3 packets shouldn't cause the security parameters
to be interpreted as a character string - those values are apparently
not supposed to show up in packets - so we handle those values in the
default case, with the security parameters treated as opaque data.
svn path=/trunk/; revision=2124
|
|
if the octet string is zero-length; if the octets are to be interpreted
as a character string, we have to check for a null pointer and replace
it with a pointer to a null string.
svn path=/trunk/; revision=2102
|
|
string into it, and return a pointer to that buffer, rather than being
passed a buffer. This gets rid of some additional fixed-length string
buffers (and makes it more closely resemble the "format_oid()" in the
libsmi-based "packet-snmp.c" under development).
svn path=/trunk/; revision=2099
|
|
string into it, and return a pointer to that buffer, rather than being
passed a buffer. This gets rid of some additional fixed-length string
buffers (and makes it more closely resemble the "format_oid()" in the
libsmi-based "packet-snmp.c" under development).
svn path=/trunk/; revision=2098
|
|
allocate the buffer into which it formats the variable value, and return
that value. This
1) makes it more closely resemble the formatting routine in the
libsmi-based "packet-snmp.c" under development;
2) makes it less likely to overrun the buffer (we can't be
certain how long the string "sprint_value()" generates will
be, but we can make a reasonable guess as to the maximum size
based on the type and size of the object we're formatting).
When *not* using "-lsnmp", dynamically allocate the buffers into which
we format octet strings and OID values, based on the size of the object
we're formatting, so that we don't overrun the buffer.
svn path=/trunk/; revision=2091
|
|
for example, larger octet string values.
svn path=/trunk/; revision=2089
|
|
symbolically as full sequences, call "snmp_set_suffix_only(2)" to cause
them to be displayed symbolically as a module name and a name within
that module, as that might make it easier to find the RFC or whatever
that describes the object in question.
Don't just statically call it, though, on Linux, as that causes binaries
built on Red Hat releases prior to 6.2 to fail to run on 6.2, due to the
UCD SNMP 4.1.1 library used in RH 6.2 not being 100% binary-compatible
with the UCD SNMP libraries used in those prior releases. Instead, on
Linux, try to "dlopen()" the "libsnmp.so" library and, if that succeeds,
try to find "snmp_set_suffix_only()" in that library - if that succeeds,
call it, otherwise try to find "ds_set_int()" in that library and, if
*that* succeeds, call it with the arguments that, in UCD SNMP 4.1.1, the
"snmp_set_suffix_only()" macro passes to it.
svn path=/trunk/; revision=2077
|
|
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
|
|
number, and have the protocols encapsulated inside IPX register
themselves with that table.
svn path=/trunk/; revision=2028
|
|
"snmp_set_full_objid()" as a macro rather than a function - 4.1.2 has it
as a function again.
svn path=/trunk/; revision=1995
|
|
SNMP, where we let the ATM code tell the SNMP dissector to call it
"ILMI"), so don't pass a protocol name string into "dissect_smux_pdu()",
just have "dissect_smux_pdu()" call it "SMUX".
svn path=/trunk/; revision=1983
|
|
library.
svn path=/trunk/; revision=1964
|
|
svn path=/trunk/; revision=1960
|
|
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
|
|
platforms.
svn path=/trunk/; revision=1930
|
|
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
|
|
UDP and into the handoff registration routines for the protocols in
question.
Make the dissectors for those protocols static if they're not called
outside the dissector's source file.
Get rid of header files if all they did was declare dissectors that are
now static; remove declarations of now-static dissectors from header
files that do more than just declare the dissector.
svn path=/trunk/; revision=1823
|
|
"non-repeaters" and "max-repetitions" rather than as "error status" and
"error index".
svn path=/trunk/; revision=1721
|
|
Fix a comment.
svn path=/trunk/; revision=1720
|
|
"ds_set_boolean()" with the first two arguments being DS_LIBRARY_ID and
DS_LIB_PRINT_FULL_OID; this means that, when building with 4.1[.x]
(which we assume is the case if "snmp_set_full_objid" is defined, we
need to include <ucd-snmp/default_store.h>, to define those two values
and to declare "ds_set_boolean()".
svn path=/trunk/; revision=1657
|
|
svn path=/trunk/; revision=1437
|
|
now, assume that if they lack that, they lack "sprint_value()".
svn path=/trunk/; revision=1326
|
