| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also move ncp222.py, x11-fields, process-x11-fields.pl,
make-reg-dotc, and make-reg-dotc.py.
Adjust #include lines in files that include packet-*.h
files.
svn path=/trunk/; revision=11410
|
|
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
|
|
Correct several problems with zoneset decodes (e.g. the zoneset
and zone name lengths do *not* include the pad bytes, so the
offset calculation needed to be fixed).
Move the decode of zoneset name into the routine
"dissect_fcfzs_zoneset", so that it is done in only one place.
svn path=/trunk/; revision=9137
|
|
- Decoders for the few remaining FC protocols not included in my first
patch. Included in this list are decoders for FC-CT (common transport),
Name Server (dNS), Fabric Configuration Server (FCS) and Zone Server
(FZS).
- Decoder for MDS Debug Port Adapter. MDS Debug Port Adapter (internal
name was Boardwalk and this is the file name) is a piece of hardware
that can be purchased with Cisco's MDS Fibre Channel switches that
converts FC frames into Ethernet frames. One end is connected to a
port on a FC switch and the other end is connected to a FE/GE Ethernet
port. The decoder included here decodes the encapsulation header that
carries information such as SOF/EOF of FC frames.
svn path=/trunk/; revision=6919
|
