Age | Commit message (Collapse) | Author | Files | Lines |
|
debug printf's in there.
svn path=/trunk/; revision=562
|
|
necessary nor sufficient if you're using "struct tm" (on many, perhaps
most, perhaps even all modern UNIXes, <sys/time.h> includes <time.h>,
which declares "struct tm", but that's not necessarily the case on
non-UNIX systems).
Include <time.h> in "file.c", to declare "struct tm".
Don't use PCAP_ERRBUF_SIZE to declare a message string buffer - that
won't work if you don't have "libpcap".
svn path=/trunk/; revision=549
|
|
and in different capture files; throw in some heuristics to try to
figure out whether the 4-byte header is:
1) PPP-over-HDLC (some version of ISDN4BSD?);
2) big-endian AF_ value (BSD on big-endian platforms);
3) little-endian AF_ value (BSD on little-endian platforms);
4) two octets of 0 followed by an Ethernet type (Linux, at least
on little-endian platforms, as mutated by "libpcap").
Make a separate Wiretap encapsulation type, WTAP_ENCAP_NULL,
corresponding to DLT_NULL.
Have the PPP code dissect the frame if it's PPP-over-HDLC, and have
"ethertype()" dissect the Ethernet type and the rest of the packet if
it's a Linux-style header; dissect it ourselves only if it's an AF_
value.
Have Wiretap impose a maximum packet size of 65535 bytes, so that it
fails more gracefully when handed a corrupt "libpcap" capture file
(other capture file formats with more than a 16-bit capture length
field, if any, will have that check added later), and put that size in
"wtap.h" and have Ethereal use it as its notion of a maximum packet
size.
Have Ethereal put up a "this file appears to be damaged or corrupt"
message box if Wiretap returns a WTAP_ERR_BAD_RECORD error when opening
or reading a capture file.
Include loopback interfaces in the list of interfaces offered by the
"Capture" dialog box, but put them at the end of the list so that it
doesn't default to a loopback interface unless there are no other
interfaces. Also, don't require that an interface in the list have an
IP address associated with it, and only put one entry in the list for a
given interface (SIOCGIFCONF returns one entry per interface *address*,
not per *interface* - and even if you were to use only IP addresses, an
interface could conceivably have more than one IP address).
Exclusively use Wiretap encapsulation types internally, even when
capturing; don't use DLT_ types.
svn path=/trunk/; revision=540
|
|
is the only file that uses them. I hope to avoid some compiler warnings
with this.
svn path=/trunk/; revision=512
|
|
write them in "libpcap" format, but the mechanism can have other formats
added.
When creating the temporary file for a capture, use "create_tempfile()",
to close a security hole opened by the fact that "tempnam()" creates a
temporary file, but doesn't open it, and we open the file with the name
it gives us - somebody could remove the file and plant a link to some
file, and, if as may well be the case when Ethereal is capturing
packets, it's running as "root", that means we write a capture on top of
that file.... (The aforementioned changes to Wiretap let you open a
capture file for writing given an file descriptor, "fdopen()"-style,
which this change requires.)
svn path=/trunk/; revision=509
|
|
want to read the next file with the same filter that you used on the
last file.
In the "File/Open" dialog box, parse the read filter before trying to
open the file, and if the parse fails, leave the dialog box up so the
user still has the filter and file name around and can try to fix the
problem.
Keep the compiled read filter attached to the "capture_file" structure,
so you don't have to reparse it on a "File/Reload".
svn path=/trunk/; revision=497
|
|
reason for the failure, and have it do the checks to make sure the file
being opened is a plain file or a pipe.
Have "open_cap_file()" make use of that.
Don't automatically set "last_open_dir" if a "-r" flag was specified on
the command line - do so only if the file in question could actually be
opened.
svn path=/trunk/; revision=495
|
|
it's called after "open_cap_file()" has been called, and is always
passed the file name passed to "open_cap_file()", and that file name is
stored as "cf->filename", so "read_cap_file()" can just use
"cf->filename" as the pathname of the file.
svn path=/trunk/; revision=494
|
|
The former, which used to be called by "load_cap_file()", now just opens
the file and, if the open succeeds, closes any capture file we
previously had open, reinitializes any protocols that need
reinitialization, and saves information about the new capture file in
the "capture_file" structure to which it was passed a pointer. The
latter reads the file already opened by "read_cap_file()".
For "File/Open", call "open_cap_file()" before dismissing the file
selection box; if it fails, "open_cap_file()" will have popped up a
message box complaining about it - just return, leaving the file
selection box open so the user can, after dismissing the message box,
either try again with a different file name, or dismiss the file
selection box. (Other file selection boxes should be made to work the
same way.) If "open_cap_file()" succeeds, dismiss the file selection
box, and read the capture file in.
svn path=/trunk/; revision=492
|
|
in dfilter-grammar.y) to a new struct dfilter. Display filters now have
their own struct, rather than simply being GNode's. This allows multiple
display filters to exist at once, aiding John McDermott in his
work on colorization.
svn path=/trunk/; revision=480
|
|
svn path=/trunk/; revision=471
|
|
svn path=/trunk/; revision=463
|
|
svn path=/trunk/; revision=462
|
|
the "Open File" dialog box (the "Open File" dialog box equivalent of the
"-R" flag). Have "load_cap_file()" take the filter expression as an
argument, and make the global "rfilter" into a member of a
"capture_file" structure.
When reading a temporary capture file after a live capture, don't apply
any filter.
Move the code that pops up error boxes on file opens when reading a
capture file back to "load_cap_file()"; it also pops up error boxes if
the filter expression can't be parsed.
Don't enable "File/Save" or "File/Save As..." if an attempt to read a
capture file fails - if there was already an open capture file, it was
closed by "load_cap_file()", so we no longer have an open file to save.
svn path=/trunk/; revision=460
|
|
N^2 in the ultimate size of the list (as "g_list_append()" is linear in
the size of the list, at least when used in the way the GLib
documentation says to use it); instead, maintain our own linked list of
"frame_data" structures for all packets read, including a pointer to the
last element.
"gtk_clist_set_row_data()" is linear in the row number, so if it's used
to attach a pointer to the "frame_data" structure for a packet to the
packet list GtkClist row for each packet, that's also N^2 in the number
of packets in that packet list; instead, store the row number in the
"frame_data" structure, and find the packet for a given row by scanning
the list for it (we were already scanning the list linearly to find that
packet's index in the list of all packets; that's only done when a
packet's selected, so it's not *too* bad, but it might be nice to avoid
having to do that scan).
svn path=/trunk/; revision=457
|
|
the source directory. The doc makefile is still broken however.
Thanks to Jan Bernard van Doorn for raising this problem.
svn path=/trunk/; revision=453
|
|
try as I might, I couldn't get gtk_timeout_add to work. I read all the docs,
but no luck. So for now I call dfilter_progress_cb for every 20 packets
that are filtered. I'd rather have *something* for the next Ethereal
release than nothing.
I also modified file_progress_cb to use it's local copy of cf rather
than the global copy.
svn path=/trunk/; revision=447
|
|
wiretap support for RADCOM Ltd.'s WAN/LAN analyzers (see
http://www.radcom-inc.com/
). Note: as I remember, IEEE 802.2/ISO 8022 LLC has somewhat of an SDLC
flavor to it, just as I think LAP, LAPB, LAPD, and so on do, so we may
be able to combine some of the LLC dissection and the LAPB dissection
into common code that could, conceivably be used for other SDLC-flavored
protocols.
Make "S" a mnemonic for "Summary" in the "Tools" menu.
Move the routine, used for the "Tools/Summary" display, that turns a
wiretap file type into a descriptive string for it into the wiretap
library itself, expand on some of its descriptions, and add an entry for
files from a RADCOM analyzer.
Have "Tools/Summary" display the snapshot length for the capture.
svn path=/trunk/; revision=416
|
|
"capture_file" structure, make a "select_packet()" routine to parallel
"unselect_packet()", and have "unselect_packet()" free the protocol tree
that the "protocol_tree" member of the "capture_file" passed to it
points to.
It should now be impossible to do a "Print Packet" operation if no
packet has been selected, so remove the check for that (we'll probably
just blow up if it happens; if it does, that means we probably forgot to
gray out "/File/Print Packet" somewhere, so we should fix that).
svn path=/trunk/; revision=385
|
|
you have a capture.
Leave the job of enabling and disabling menu items that make sense only
if you have a capture (except for "File/Save" and "File/Save As...", for
now) up to "load_cap_file()", "close_cap_file()", and the like - don't
scatter that stuff throughout the code.
Disable "File/Print Packet" if no packet is selected; enable it only if
a packet is selected.
If there's a selected packet, and a display filter is run:
if the selected packet passed the filter, re-select it;
if the selected packet didn't pass the filter, un-select it.
If we've opened a live "pcap" capture, but can't do the capture because
we can't get the netmask info, or can't parse the capture filter string,
or can't install the filter, close the live capture and the dump and
delete the dump file.
If we failed to open a live "pcap" capture, don't try to read the
capture file - it doesn't exist.
svn path=/trunk/; revision=384
|
|
capture to a file or printer. This should eventually get the ability to
print either all the packets or only the packets selected by the display
filter, and possibly also the ability to print only packets M through N.
Get rid of "cur" member of "capture_file" structure; nobody used it.
There's no need to pass a pointer to a "dialog_button" variable to
"simple_dialog()" for the error boxes displayed if a file copy or move
fails; that dialog box is just a message box and has only an "OK"
button.
Put the declaration of "prefs" into "prefs.h".
svn path=/trunk/; revision=378
|
|
but does not link. Perhaps someone who understands the MS tools can help
out. I made it link a few months ago, but with different version of glib/gtk+.
I can't remember how I made it link.
Most of the compatibility issues were resolved with adding
#ifdef HAVE_UNISTD_H the the source code. Please be sure to add this to all
future code.
svn path=/trunk/; revision=359
|
|
doesn't link with libpcap, so no packet captures can be made. The
"--disable-pcap" option has been added to the configure script. Docs
have been updated. And the string buffer size in the simple_dialog()
has been doubled so that Johan's e-mail address in the "About" dialogue
window doesn't get chopped off.
svn path=/trunk/; revision=351
|
|
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
|
|
NetMon statistic packets for now. We might fix that problem with wiretap,
either filtering out those packets, and/or providing the summary
information through a new wiretap API.
svn path=/trunk/; revision=326
|
|
changed by updating those columns showing the time in the
"command-line-specified" format, not by redoing the entire packet list
display; that way, the display continues to show the same packets and
any packet the user selected remains selected. (It's also less work to
do that - you don't have to re-dissect the packet.)
Turn "redisplay_packets()" into "filter_packets()", and do some other
cleanups.
svn path=/trunk/; revision=325
|
|
is the same as "Tools/Capture", and "Display" has an "Options" item,
which pops up a dialog box to let you change the "default" time-stamp
column display format on the fly (the "default" is what the "-t"
command-line option sets), and have the display change when you do that.
Made infrastructure changes to make the immediate display update work.
Removed some unused functions, declared some functions used only in the
file in which they're defined "static", and removed some unnecessary
#includes.
svn path=/trunk/; revision=317
|
|
influence came from
http://developer.apple.com/techpubs/mac/HIGuidelines/HIGuidelines-232.html
which has a section on dialog box and alert box messages. However,
we're largely dealing with technoids, not with The Rest Of Us, so I
didn't go as far as one perhaps should.)
Unfortunately, it looks like it's a bit more work to arrange that, if
you give a bad file name to the "-r" flag, the dialog box pop up only
*after* the main window pops up - it has the annoying habit of popping
up *before* the main window pops up, and sometimes getting *obscured* by
it, when I do that. The removal of the dialog box stuff from
"load_cap_file()" was intended to facilitate that work. (It might also
be nice if, when an open from the "File/Open" menu item fails, we keep
the file selection box open, and give the user a chance to correct
typos, choose another file name, etc.)
svn path=/trunk/; revision=310
|
|
display of fully decoded packets at the same time.
Options added:
-F : fork capture process
-S : sync mode ala tail -f (implies -F)
-f : filter expression
-Q : exit after capture (implies -k)
svn path=/trunk/; revision=276
|
|
buffer. That is, it's
a random name chosen by tempnam(), unknown to the user. If the user decides to save that
trace, he then uses File | Save to save it to a file. File | Save As lets him make a copy
of his named trace file as well. I also updated my e-mail address in the various credit
locations.
svn path=/trunk/; revision=242
|
|
reference the protocol tree with struct proto_tree and struct proto_item
objects. That way, the packet decoding source code file can be used with
non-gtk packet decoders, like a curses-based ethereal, e.g. I also re-arranged
some of the information in packet.h to more appropriate places (like other
packet-*.[ch] files).
svn path=/trunk/; revision=223
|
|
Crank the maximum packet size up to 65535 bytes.
svn path=/trunk/; revision=185
|
|
provide a per-packet encapsulation type. this required minor modifications to
ethereal.
svn path=/trunk/; revision=162
|
|
This necessitated a change in ethereal because iptrace supports multi-NIC
packet capturing, including multi-datalink-type capturing.
svn path=/trunk/; revision=145
|
|
* Added check_col(), add_col_str() and add_col_fmt() to replace references
to ft->win_info.
* Added column prefs handling code.
svn path=/trunk/; revision=97
|
|
That requires that, in the packet-reading loop, we pass to the callback
routine the offset in the file of a packet's data, because we can no
longer compute that offset by subtracting the size of the captured
packet data from the offset in the file after the data was read -
"snoop" may stick padding in after the packet data to align packet
headers on 4-byte boundaries.
Doing that required that we arrange that we do that for "libpcap"
capture files as well; the cleanest way to do that was to write our own
code for reading "libpcap" capture files, rather than using the
"libpcap" code to do it.
Make "wtap_dispatch_cb()" and "pcap_dispatch_cb()" static to "file.c",
as they're not used elsewhere.
If we're using wiretap, don't define in "file.h" stuff used only when
we're not using wiretap.
Update the wiretap README to reflect Gilbert's and my recent changes.
Clean up some memory leaks in "wiretap/lanalyzer.c" and
"wiretap/ngsniffer.c", where the capture-file-format-specific data
wasn't freed if the open failed.
svn path=/trunk/; revision=91
|
|
because it is still in its infancy, but it can be compiled in optionally.
The library exists in its own subdirectory ethereal/wiretap. This patch also
edits all the packet-*.c files to remove the #include <pcap.h> line which is
unnecessary in these files. In the ethereal code, file.c is the most heavily
modified with #ifdef WITH_WIRETAP lines for the optional library.
svn path=/trunk/; revision=82
|
|
- Separated display and capture filters; rearranged some of the look and feel
- Lots of other miscellaneous fixes and updates
svn path=/trunk/; revision=38
|
|
svn path=/trunk/; revision=10
|
|
svn path=/trunk/; revision=7
|
|
svn path=/trunk/; revision=2
|