Age | Commit message (Collapse) | Author | Files | Lines |
|
the packet boundary. Now the field boundary is honored. The frame boundary
is ignored, but of course we put proper field lengths in the proto_tree,
right? :)
Implemented negative offsets in byte-strings:
frame[-4:4] will read the last 4 bytes of a frame.
Implemented "offset-only" byte-string comparisons, since the dfilter
compiler knows the length of the byte-string you supplied. These are
now legal:
frame[-4] == 0.0.0.1
tr.dst[0] == 00:06:29
Implemented the use of integers if you're comparing one byte. These are
legal:
llc[0] == 0xaa
llc[0:1] == 0xaa
All these forms check against the length of the field, so these will be
reported as bad to the user:
eth.src[5] == 00:06:29 (goes beyond field boundary)
eth.dst == 1.2.3.4.5.6.7 (too long, goes beyond field boundary)
Thes is also reported as bad:
eth.dst[0:3] == 1.2 (incorrect number of bytes specified)
eth.dst[0:1] == eth.src[0:2] (disparate lengths)
I had to add a new function, proto_registrar_get_length() in proto.c, which
reports the length of a field as can be determined at registration time.
There are some shift/reduce errors in the grammar that I need to get rid of.
svn path=/trunk/; revision=811
|
|
(Is there a better way to force a parse to fail from arbitrary
places in routines called by the parser?)
asked in an earlier checkin is "yes", which would've been obvious had I
seen the code that handles MAC addresses, as it returns NULL on an
error, and the YACC clause checks for a null return value and, if the
return value is null, uses YYERROR to make the parse fail.
Use that for IPv4 and IPv6 errors.
Also, use "dfilter_fail()" for the MAC address code.
svn path=/trunk/; revision=810
|
|
there is still some work to do in resolv.c (get_host_ipaddr6)
- add display filters of this kind in packet-ipv6.c just
for testing (display filtering is incomplete)
svn path=/trunk/; revision=808
|
|
what we set "node->value.numeric" to if we failed to convert a string to
an IP address (that failure means "dfilter_compile()" will throw the
filter away and return NULL), so just set it to 0.
svn path=/trunk/; revision=804
|
|
"cf.dfcode" if the new filter doesn't compile, because the filter
currently in effect will be the one that was last applied - just free up
the text of the new filter, and whatever memory was allocated for the
new filter code.
This means we allocate a new dfilter when a new filter is to be applied,
rather than recycling stuff from the old filter, as we want the old
filter code to remain around if the new filter doesn't compile.
This means that "cf.dfilter" and "cf.dfcode" will be null if there's no
filter in effect.
svn path=/trunk/; revision=803
|
|
succeeded or failed, and, if it succeeded, have it fill in the IP
address if found through a pointer passed as the second argument.
Have it first try interpreting its first argument as a dotted-quad IP
address, with "inet_aton()", and, if that fails, have it try to
interpret it as a host name with "gethostbyname()"; don't bother with
"gethostbyaddr()", as we should be allowed to filter on IP addresses
even if there's no host name associated with them (there's no guarantee
that "gethostbyaddr()" will succeed if handed an IP address with no
corresponding name - and it looks as if FreeBSD 3.2, at least, may not
succeed in that case).
Add a "dfilter_fail()" routine that takes "printf()"-like arguments and
uses them to set an error message for the parse; doing so means that
even if the filter expression is syntactically valid, we treat it as
being invalid. (Is there a better way to force a parse to fail from
arbitrary places in routines called by the parser?)
Use that routine in the lexical analyzer.
If that error message was set, use it as is as the failure message,
rather than adding "Unable to parse filter string XXX" to it.
Have the code to handle IP addresses and host names in display filters
check whether "get_host_ipaddr()" succeeded or failed and, if it failed,
arrange that the parse fail with an error message indicating the source
of the problem.
svn path=/trunk/; revision=802
|
|
Get rid of the declaration of the non-existent "dfilter_yyerror()", and
put in some #defines to work around the fact that the #defines to
replace "yy" with "dfilter_" in the names of Flex-generated and
Yacc-generated routines aren't put into a header file, they're put into
".c" files.
Have it remember the error message it was handed (unless it's Yacc's
boring "parse error" message).
When generating the message to be shown to the user on a parse error,
make it be the "Unable to parse filter string" message, and, if a
non-boring error message was supplied to "dfilter_error()", take that
error message onto the end.
Don't panic if a field type we don't yet support in the parser is seen;
generate an error, telling the user we don't support filter on that type
yet.
Don't assume that "global_df" has been set if we see an empty statement
(if the first token was the end-marker, because, say, the first token
the lexical analyzer found was a field of a type not yet supported in
filter expressions, "global_df" won't have been set).
svn path=/trunk/; revision=783
|
|
After some bad dfilter parses, the top-level dfilter tree (global_df->dftree)
would erroneously be set to the last good dfilter_node that was parsed.
Later, the non-NULLness of the dftree made us clear it.. really confusing
GTK internals. After _that_, new GNodes created via g_node_new() would
all have the same address!
svn path=/trunk/; revision=735
|
|
Dissector code can add FT_BOOLEAN fields to the proto_tree and pass TRUE
or FALSE values (non-zero and zero values). The display filter language,
however, treats the checking for the existence of a FT_BOOLEAN field as
the checking for its truth. Before this change, packet-tr.c was the only
dissector using FT_BOOLEAN fields, and it only added the field to the
proto_tree if the TRUE; the dissector was determining the difference between
the check for existence and the check for truth.
I made this change because packet-ppp.c added some FT_BOOLEAN fields and
added them to the tree regardless of truth value, It's more natural just to
do it this way and let the display filter code worry about whether to
check for existence or truth. So that's how it works now.
svn path=/trunk/; revision=679
|
|
a protocol occurs only once in a packet. Because of encapsulation (IP within
IP), a protocol can occur more than once. I don't have a packet trace
showing such a packet, but the code should handle it now. The one thing
that it cannot do, though, is differentiate the levels. It might be
nice to say:
ip{1}.src == 192.168.1.1 && ipx{2}.dst == 10.0.0.1
In the dfilter grammar I had left IPXNET variables out of the list
of variables that could be checked for existence. Now you can check
for the existence of ipx.srcnet and ipx.dstnet. Hurrah.
svn path=/trunk/; revision=608
|
|
is true. The test for truth now becomes a test for existence. The dfilter
grammar no longer recognizes 'true' and 'false', since you can now check
a boolean field via:
tr.sr
or by its negation:
!tr.sr
svn path=/trunk/; revision=591
|
|
After a bad parse, instead of leaking this memory, the memory used for
those GNodes is now freed.
Added some memory-freeing "cleanup" routines for the dfilter and proto_tree
modules, which are called right before ethereal exits. Maybe once we get
a complete set of cleanup routines, we'll be able to better check if
memory is leaking.
svn path=/trunk/; revision=582
|
|
dfilter_compile, and removed debug printf that I left in match_selected.
svn path=/trunk/; revision=532
|
|
complaints.
svn path=/trunk/; revision=531
|
|
global variable, dfilter_error_msg is now available, being NULL when there
was no error, or pointing to a string when an error occurred. The three
places that dfilter_compile() is called now use this global variable to
report the error message to the user. A default error message is put
in that string if no context-specific error message is available (since
I only have one context-specifici error message, namely, ETHER values,
that will be most of the time).
svn path=/trunk/; revision=530
|
|
improving size of grammar and creating the possibility of dfilter_compile
reporting errors back to user. In this case, if an ETHER variable is
compared against a byte string that is not 6 bytes, an error condition is
flagged appropriately. I have not put in the code to conver that error flag
to a message to the user, but that's what I'm working on next.
Also, fixed sample debug session in README to show correct gdb prompt.
svn path=/trunk/; revision=522
|
|
libpcap's that were compiled with symbols beginning with 'yy'.
svn path=/trunk/; revision=487
|
|
in dfilter-grammar.y) to a new struct dfilter. Display filters now have
their own struct, rather than simply being GNode's. This allows multiple
display filters to exist at once, aiding John McDermott in his
work on colorization.
svn path=/trunk/; revision=480
|
|
display filter code but not outside it (and not static to one of the
modules in the display filter code), with most of that stuff moved there
from "dfilter.h".
Add a declaration of "byte_str_to_guint8_array()" to "dfilter-int.h".
svn path=/trunk/; revision=479
|
|
1. Some IP addresses (like 0.0.0.0) would be interpreted as byte ranges.
2. Parens were being ignored.
Thanks to Guy for pointing these out to me.
svn path=/trunk/; revision=477
|
|
instead of "yy". (dfilter-grammar.y was modified to #define yylex as
dfilter_lex).
VERSION is no longer needed since the doc/Makefile now uses @VERSION@,
passed to it from 'configure'.
svn path=/trunk/; revision=469
|
|
field by itself assumes you are checking for the existence of that protocol
or field.
Changed the format of the list of filterable fields in the man page.
Developers: run "./configure" so that your configure script will re-create
dfilter2pod from the new dfilter2pod.in
svn path=/trunk/; revision=426
|
|
the rules allowing values to precede variables in a relation, like this:
192.168.1.1 eq ip.src
More profound changes should still be made to the grammar, though.
svn path=/trunk/; revision=422
|
|
as it standed depends on your lex being flex, but that only matters if you're
a developer. The distribution will include the dfilter-scanner.c file, so
that if the user doesn't modify dfilter-scanner.l, he won't need flex to
re-create the *.c file.
The new lex scanner gives me better syntax checking for ether addresses. I
thought I could get by using GScanner, but it simply wasn't powerful enough.
All operands have English-like abbreviations and C-like syntax:
and, && ; or, || ; eq, == ; ne, != ; , etc.
I removed the ETHER_VENDOR type in favor of letting the user use the [x:y]
notation: ether.src[0:3] == 0:6:29 instead of ether.srcvendor == 00:06:29
I implemented the IPXNET field type; it had been there before, but was
not implemented. I chose to make it use integer values rather than byte
ranges, since an IPX Network is 4 bytes. So a display filter looks like this:
ipx.srcnet == 0xc0a82c00
rather than this:
ipx.srcnet == c0:a8:2c:00
I can supposrt the byte-range type IPXNET in the future, very trivially.
I still have more work to do on the parser though. It needs to check ranges
when extracting byte ranges ([x:y]) from packets. And I need to get rid
of those reduce/reduce errors from yacc!
svn path=/trunk/; revision=414
|
|
operators that I had thrown in at the last moment. Sorry! But I'm trying
to get rid of those embarrassing shift/reduce and reduce/reduce warnings.
I also removed wiretap/wiretap.c, which is no longer needed.
svn path=/trunk/; revision=345
|
|
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
|