Age | Commit message (Collapse) | Author | Files | Lines |
|
Instead of using "$ORIGIN/../lib" just use "$ORIGIN".
Also be explicit in configuring the relative RPATH. We don't want
to assume a default relative path, in case more targets are addded,
out of caution.
Change-Id: I3b7f5e8de7be8bb30aca3b433212113d876c4163
Reviewed-on: https://code.wireshark.org/review/31647
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
This is more explicit and easier to read with slightly better locality
while using less code.
Also less awkward when the package doesn't fit the narrow package list
expectations.
The ws_find_package() macro doesn't include all the status messages. The
choice was to rely on standard find_package() and feature_summary() output
and be less verbose.
Avoid polluting the CLI build interface. Per target include paths and
macro definitions are preferred.
Because this patch intentionally removes the global CMAKE_*_FLAGS
and include_directories() usage in favor of target properties, some
untested build configurations may inadvertently break because of
missing ${PACKAGE}_INCLUDE_DIRS or ${PACKAGE}_DEFINITIONS. This
required a manual review of dependencies that might have been
incomplete.
${PACKAGE_VAR}_LINK_FLAGS seems to be unused.
Changing the CMake Qt code to use more modern CMake component syntax
is left as future work.
Change-Id: I3ed75252189a6e05a23ed6e619088f519cd7ed78
Reviewed-on: https://code.wireshark.org/review/31496
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Setting LIBRARY_OUTPUT_DIRECTORY to Wireshark.app/Contents/Frameworks
for each of our libraries ends up installing a fully versioned .dylib
along with soversion and unversioned symlinks, which is more than we
want and which wastes disk space when osx-app.sh dsymifies our
libraries.
Leave LIBRARY_OUTPUT_DIRECTORY unset and depend on osx-app.sh to copy
our libraries into place.
Bug: 15361
Change-Id: If0fbaa796b4be806e2aa13887e511a330fe55df5
Reviewed-on: https://code.wireshark.org/review/31139
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Ping-Bug: 15301
Change-Id: I7d461c696ce096b7687f71277a33295eb43ff8fc
Reviewed-on: https://code.wireshark.org/review/30792
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Install headers to support plugins development on Windows.
Change-Id: I3161bd2f730edf62ab44fee6ce4fedbb9aee0d31
Reviewed-on: https://code.wireshark.org/review/30776
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Multi-configuration generators (such as Xcode or VS) append the current build configuration to most paths (eg. Debug/Release). Currently this results in inconsistent paths for the application bundle and the included command line tools. This commit sets the correct path information for multi-configuration generators for macOS application bundles. The standard Makefile behaviour is untouched.
One Windows specific configuration was changed, as it was conflicting with these changes. This needs to be checked before merging.
Additionally the wrapper scripts are omitted for Xcode, as the path to the binaries depends on the configuration chosen in Xcode. Therefore it is not viable to create these scripts in the cmake run.
Bug: 11816
Change-Id: Ib43d82eb04600a0e2f2b020afb44b579ffc7a7c9
Reviewed-on: https://code.wireshark.org/review/28291
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
gd2e0724afc moved our library versions into their own variables named
FULL_SO_VERSION. They're no longer used and interfere with
tools/release-update-debian-soversions.sh so remove them.
Fix some shellcheck warnings in release-update-debian-soversions.sh
while we're here.
Bug: 14778
Change-Id: I0eb0bb4ab4c482bdb8a94f8c18aa04c6c83c781b
Reviewed-on: https://code.wireshark.org/review/28068
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change-Id: I3861061ec261e63b23621799e020e811ed78a343
Reviewed-on: https://code.wireshark.org/review/26333
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Change-Id: I02f43e660484e9c0ebce96b42dbdd7b4229a1198
Reviewed-on: https://code.wireshark.org/review/25560
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Somehow the registration of the SBC codec was duplicated, which does not
(yet) cause an error message, but also doesn't work.
Remove the duplicate registration.
Change-Id: Ic22ba66fd65b326fb2688300dad8f9b81081c7e5
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/25506
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Make plugins.c the source of truth for plugin names. Where plugins
reside and what they do are two different things, so split the plugin
directory and description into two separate elements.
CMake creates portable[1] builds on Windows and macOS. That is, the
build-time directory layout is the same as the installation directory
layout. Adjust various plugin paths macOS accordingly.
[1] You have to run osx-app.sh on macOS to prepare the application
bundle, but the goal is to create a directory/bundle that can be moved
or copied to a different system and run in the new location.
Change-Id: Icf9d02e61918fdf1404468baf52542910edf2743
Reviewed-on: https://code.wireshark.org/review/25166
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
|
|
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: I5d68c05f2844d6c9ae486531b189dbf10bc09cff
Reviewed-on: https://code.wireshark.org/review/24484
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: Iedae94ffefe27b13b1967d69cacb757b5aa4576d
Reviewed-on: https://code.wireshark.org/review/23928
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Autotools has the very useful feature by design of allowing the user
to override the default build flags (you break it you keep it).
Apparently CMake applies COMPILE_OPTIONS target property after
CMAKE_{C,CXX}_FLAGS so that doesn't work here. Prepend our flags to those
variables instead to make it work then.
Specific target flag overrides can still be added with COMPILER_OPTIONS
(e.g: generated files with -Wno-warning) but this is less effective and
then we're back at the point where this overrides user flags. It's less
of a concern though.
Change-Id: I44761a79be4289238e02d4e781fef0099628817b
Reviewed-on: https://code.wireshark.org/review/23675
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Change-Id: I0f343ab69a6592a466e12e5d258f0878b9c32c25
Reviewed-on: https://code.wireshark.org/review/23752
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: If145137bfd44025ccab762b67960072777efd302
Reviewed-on: https://code.wireshark.org/review/23750
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: Ie7376ac5fd8a950e3c1c744ce4701b14ee1849ea
Reviewed-on: https://code.wireshark.org/review/23664
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
For a sane plugin build environment. Include config.h as the first
header in the .c file instead.
Fix by moving required compiler attribute macros to a new
"ws_attributes.h" API header.
Change-Id: I34f58a927f68c1a0e59686c14d214825149749e1
Reviewed-on: https://code.wireshark.org/review/23400
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Bug: 13635
Change-Id: Ic22a0719a59da13e51425aeb747e88caca0d6512
Reviewed-on: https://code.wireshark.org/review/22808
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Many capitalization can be found for this library (spandsp, Spandsp, SpanDSP),
let's use the one found in the library README and in its spec file.
Change-Id: Ia66b723e5d582a6218da1b6366b7d4859272f80c
Reviewed-on: https://code.wireshark.org/review/19122
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Integrate the Spandsp library for G.722 and G.726 support. Adds support
for G.722 and all eight variants of G.726.
Note: this also fixes a crash in Qt (buffer overrun, reading too much
data) caused by confusion of the larger output buffer (resample_buff)
with the smaller input buffer (decode_buff). It was not triggered before
because the sample rate was always 8k, but with the addition of the new
codecs, a different sample rate became possible (16k).
Fix also a crash which occurs when the RTP_STREAM_DEBUG macro is enabled
and the VOIP Calls dialog is opened (the begin frame, start_fd, is not
yet known and therfore a NULL dereference could occur).
Passes testing (plays normally without bad RTP timing errors) with
SampleCaptures files: sip-rtp-g722.pcap and sip-rtp-g726.pcap. Tested
with cmake (Qt), autotools (Qt and GTK+) with ASAN enabled.
Bug: 5619
Change-Id: I5661908d193927bba50901079119eeff0c04991f
Reviewed-on: https://code.wireshark.org/review/18939
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Show codec libraries in About dialog, this should give the user a clue
of what codecs are available.
SBC is already supported, Spandsp (for G.722/G.726) is work in progress.
Change-Id: Iebc4d9c9fae619a442e06c8afc780a420aa3971b
Reviewed-on: https://code.wireshark.org/review/18978
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Not all codecs require the plugin infrastructure. For example, G.711U/A
is a built-in codec. Allow such functionality to be registered even if
plugin support is disabled.
Change-Id: I2505cc9955e7953268ec0739531278921f70a771
Reviewed-on: https://code.wireshark.org/review/18977
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
|
|
Setting our compiler warning flags in CMAKE_C_FLAGS does not allow
using different flags per target.
Allow for that possibility by setting the internal WS_WARNINGS_{C,CXX}_FLAGS
and using the COMPILE_OPTIONS property to set them.
This change is just setting mechanism and there should be no difference
in generated warnings.
The check_X_compiler_flag cmake test is changed to test each flag individually.
We need a list, not a space separated string, and the aggregate test is not
significant.
Change-Id: I59fc5cd7e130c7a5e001c598e3df3e13f83a6a25
Reviewed-on: https://code.wireshark.org/review/17150
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
1355648).
Add checks to avoid den_rate and num_rate to be set to 0.
Change-Id: Ia4880521e7ab73d0fdc44377f4badadb09365471
Reviewed-on: https://code.wireshark.org/review/16963
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
|
|
Now that nmake build system has been removed they are not needed anymore.
Change-Id: I88075f955bb4349185859c1af4be22e53de5850f
Reviewed-on: https://code.wireshark.org/review/16050
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: I4486f35e07c72d4ca35d5649de25d0c9abd2a964
Reviewed-on: https://code.wireshark.org/review/16057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
|
|
Change-Id: I3bd474f3cda9667dec66426b5729449953df3e61
Reviewed-on: https://code.wireshark.org/review/15777
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
|
|
[-Werror=pragmas]
Change-Id: Ia6c5d2c19d991ee3ca3b1525b93121ee7cf15b1e
Reviewed-on: https://code.wireshark.org/review/13919
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: Ie07f49ec5a563f3b43a2442e05646c6a0b51ca41
Reviewed-on: https://code.wireshark.org/review/15349
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
It's not common code and because it is only required for make dist
placing it in Makefile.am provides better automake readability.
Also noinst_HEADERS is not necessary in _SOURCES.
Change-Id: I5269b79b62141efbc3151e69c5584643e5ebec47
Reviewed-on: https://code.wireshark.org/review/15399
Reviewed-by: João Valverde <j@v6e.pt>
|
|
This generates a top level target, checkAPI, that is
excluded from the ALL build target, so must be run separately.
On Windows using a Visual Studio generator, call
msbuild /p:Configuration=RelWithDebInfo checkAPI.vcxproj
Change-Id: I44a57c564dcfc75499463b942436f4b920a82478
Reviewed-on: https://code.wireshark.org/review/14873
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
|
|
Change-Id: Ia394071710ecda3b0e6686a51fbca45a8ff20317
Reviewed-on: https://code.wireshark.org/review/14749
Petri-Dish: João Valverde <j@v6e.pt>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Remove mostly obsolete aclocal macros. Make GTK build flags a strict superset
of GLib flags. Use GTK build variables for GTK GUI and GLib elsewhere. Add
dependency flags explicitly instead of using WS_CPPFLAGS.
Some minor improvements and fixes for missing/unnecessary variables (no impact
on our test builds).
Change-Id: I3e1f067a875f79d6516c1fa7af986f17a7a6b671
Reviewed-on: https://code.wireshark.org/review/14005
Reviewed-by: João Valverde <j@v6e.pt>
|
|
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Change-Id: I931961033798613b78f846c9176dffdb8385bf43
Reviewed-on: https://code.wireshark.org/review/13782
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Fixes dpkg warnings:
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-qt/usr/bin/wireshark was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/wireshark-gtk/usr/bin/wireshark-gtk was not linked against libsbc.so.1 (it uses none of the library's symbols)
dpkg-shlibdeps: warning: symbol sbc_decode used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_init used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sin used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floorf used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol floor used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
dpkg-shlibdeps: warning: symbol sbc_finish used by debian/libwscodecs0/usr/lib/x86_64-linux-gnu/libwscodecs.so.0.0.0 found in none of the libraries
Change-Id: I71911513c348edd336cdc82ea358b6a05760b4b9
Reviewed-on: https://code.wireshark.org/review/13784
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
|
|
GNU coding standards recommend against it and automake is designed
around it.
This allows overriding the global build flags using AM_CFLAGS, etc.,
or per object flags, something that is difficult or impossible currently
because of automake precedence rules.
Change-Id: I3f1ea12e560af5a46b2f04b342b1882bbf123f12
Reviewed-on: https://code.wireshark.org/review/13455
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
|
|
Change-Id: I83ecc7e4f8c827c83c2f6b62918f042d023daee4
Reviewed-on: https://code.wireshark.org/review/13575
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: I0ef328ac9a1fd7281267dbb7f9d1ace97ab41071
Reviewed-on: https://code.wireshark.org/review/12422
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
|
|
Change-Id: Ieb0bb131b6d141bf85997c9a0127e0eb11ea3a3b
Reviewed-on: https://code.wireshark.org/review/12420
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
This allows to properly register codecs plugins.
See https://www.wireshark.org/lists/wireshark-dev/201511/msg00202.html for details.
Change-Id: Ibc13a19936abb7a2e81b86582a75fa424351565b
Reviewed-on: https://code.wireshark.org/review/12385
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
|
|
Disable -Wself-assign in speex/resample.c. Many macros (particularly
SATURATE32PSHR) simply return the first argument.
Change-Id: I3a8557833343e7b213031359e94af90d32d9f082
Reviewed-on: https://code.wireshark.org/review/12315
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|
|
Change-Id: I28ae077be535f32ef81ac370d6782033f219017d
Reviewed-on: https://code.wireshark.org/review/10777
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
|
|
Change-Id: Ic46823788fa240ebadd44ec2c6d332980af597be
Reviewed-on: https://code.wireshark.org/review/10755
Reviewed-by: Gerald Combs <gerald@wireshark.org>
|