1 files changed, 140 insertions, 0 deletions
diff --git a/epan/dissectors/packet-ieee80211-radio.c b/epan/dissectors/packet-ieee80211-radio.c
new file mode 100644
index 0000000000..a5f47f09b0
--- /dev/null
+++ b/epan/dissectors/packet-ieee80211-radio.c
@@ -0,0 +1,140 @@
+/* packet-ieee80211-radio.c
+ * Routines for pseudo 802.11 header dissection
+ *
+ * $Id$
+ *
+ * Wireshark - Network traffic analyzer
+ * By Gerald Combs <gerald@wireshark.org>
+ * Copyright 1998 Gerald Combs
+ *
+ * Copied from README.developer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <epan/packet.h>
+#include "packet-ieee80211.h"
+
+static dissector_handle_t ieee80211_handle;
+
+static int proto_radio = -1;
+
+/* ************************************************************************* */
+/*                Header field info values for radio information             */
+/* ************************************************************************* */
+static int hf_data_rate = -1;
+static int hf_channel = -1;
+static int hf_signal_strength = -1;
+
+static gint ett_radio = -1;
+
+/*
+ * Dissect 802.11 with a variable-length link-layer header and a pseudo-
+ * header containing radio information.
+ */
+static void
+dissect_radio (tvbuff_t * tvb, packet_info * pinfo, proto_tree * tree)
+{
+  proto_item *ti = NULL;
+  proto_tree *radio_tree = NULL;
+
+  col_set_str(pinfo->cinfo, COL_PROTOCOL, "Radio");
+  col_clear(pinfo->cinfo, COL_INFO);
+
+  /* Add the radio information to the column information */
+  col_add_fstr(pinfo->cinfo, COL_TX_RATE, "%u.%u",
+        pinfo->pseudo_header->ieee_802_11.data_rate / 2,
+        pinfo->pseudo_header->ieee_802_11.data_rate & 1 ? 5 : 0);
+    /* XX - this is a percentage, not a dBm or normalized or raw RSSI */
+  col_add_fstr(pinfo->cinfo, COL_RSSI, "%u",
+        pinfo->pseudo_header->ieee_802_11.signal_level);
+
+  if (tree) {
+    ti = proto_tree_add_item(tree, proto_radio, tvb, 0, 0, ENC_BIG_ENDIAN);
+    radio_tree = proto_item_add_subtree (ti, ett_radio);
+
+    proto_tree_add_uint64_format(radio_tree, hf_data_rate, tvb, 0, 0,
+             (guint64)pinfo->pseudo_header->ieee_802_11.data_rate * 500000,
+             "Data Rate: %u.%u Mb/s",
+             pinfo->pseudo_header->ieee_802_11.data_rate / 2,
+             pinfo->pseudo_header->ieee_802_11.data_rate & 1 ? 5 : 0);
+
+    proto_tree_add_uint(radio_tree, hf_channel, tvb, 0, 0,
+            pinfo->pseudo_header->ieee_802_11.channel);
+
+    proto_tree_add_uint_format(radio_tree, hf_signal_strength, tvb, 0, 0,
+            pinfo->pseudo_header->ieee_802_11.signal_level,
+            "Signal Strength: %u%%",
+            pinfo->pseudo_header->ieee_802_11.signal_level);
+  }
+
+  /* dissect the 802.11 header next */
+  pinfo->current_proto = "IEEE 802.11";
+  call_dissector(ieee80211_handle, tvb, pinfo, tree);
+}
+
+static hf_register_info hf_radio[] = {
+    {&hf_data_rate,
+     {"Data Rate", "wlan.data_rate", FT_UINT64, BASE_DEC, NULL, 0,
+      "Data rate (b/s)", HFILL }},
+
+    {&hf_channel,
+     {"Channel", "wlan.channel", FT_UINT8, BASE_DEC, NULL, 0,
+      "802.11 channel number that this frame was sent/received on", HFILL }},
+
+    {&hf_signal_strength,
+     {"Signal Strength", "wlan.signal_strength", FT_UINT8, BASE_DEC, NULL, 0,
+      "Signal strength (Percentage)", HFILL }}
+};
+
+static gint *tree_array[] = {
+  &ett_radio
+};
+
+void proto_register_ieee80211_radio(void)
+{
+  proto_radio = proto_register_protocol("802.11 radio information", "Radio",
+                                        "radio");
+  proto_register_field_array(proto_radio, hf_radio, array_length(hf_radio));
+  proto_register_subtree_array(tree_array, array_length(tree_array));
+}
+
+void proto_reg_handoff_ieee80211_radio(void)
+{
+  dissector_handle_t radio_handle;
+
+  /* Register handoff to radio-header dissectors */
+  radio_handle = create_dissector_handle(dissect_radio, proto_radio);
+  dissector_add_uint("wtap_encap", WTAP_ENCAP_IEEE_802_11_WITH_RADIO,
+                     radio_handle);
+  ieee80211_handle = find_dissector("wlan");
+}
+
+/*
+ * Editor modelines
+ *
+ * Local Variables:
+ * c-basic-offset: 2
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ *
+ * ex: set shiftwidth=2 tabstop=8 expandtab:
+ * :indentSize=2:tabSize=8:noTabs=true:
+ */