diff options
Diffstat (limited to 'config.nmake')
| -rw-r--r-- | config.nmake | 1753 |
1 files changed, 0 insertions, 1753 deletions
diff --git a/config.nmake b/config.nmake deleted file mode 100644 index 1f372950ee..0000000000 --- a/config.nmake +++ /dev/null @@ -1,1753 +0,0 @@ -# Some more information about the settings in this file can be found in -# the file README.windows and the Developer's Guide (available online). - -##### Deprecation ##### -# Support for NMake and QMake will be removed in June 2016. -# Uncomment the following line or pass YES_I_KNOW_ABOUT_THE_DEPRECATION=1 -# on the command line to override. - -#YES_I_KNOW_ABOUT_THE_DEPRECATION=1 -!IFNDEF YES_I_KNOW_ABOUT_THE_DEPRECATION -!MESSAGE Nmake is being deprecated. Please consider using CMake instead. -!MESSAGE See https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html -!MESSAGE for details. -!ERROR Set YES_I_KNOW_ABOUT_THE_DEPRECATION to disable this message. -!ENDIF - -##### Program name ##### -# Changing the name is experimental and may break the installer/uninstaller and possibly other stuff. -# Application data will still be under the same dir as Wireshark so preference files, profiles, and etc -# will be shared with a "normal" Wireshark installation. -# Note that support libraries need to be in PROGRAM_NAME-libs... - -!IFNDEF PROGRAM_NAME -PROGRAM_NAME=Wireshark -!ENDIF - -##### Target platform ##### - -# Pick up the value from the environment, VS2012 onwards sets PLATFORM via -# vcvarsall.bat (it appears for X64 only). -# For VS2010 and earlier you'll have to set the value yourself -!IF "$(PLATFORM)" == "x64" || "$(PLATFORM)" == "X64" -WIRESHARK_TARGET_PLATFORM=win64 -!ENDIF - -# Only "win32" and "win64" are valid (for now). -# This can be defined in the system environment. -!IFNDEF WIRESHARK_TARGET_PLATFORM -WIRESHARK_TARGET_PLATFORM=win32 -!ENDIF - -##### Versions ##### - -# The VCS's description of our build. Updated by make-version.pl -VCS_REVISION=0 - -# The current Wireshark version. Recommended: Leave unchanged. -# Updated by make-version.pl -VERSION_MAJOR=2 -VERSION_MINOR=1 -VERSION_MICRO=1 -VERSION_BUILD=$(VCS_REVISION) - -# Local build information. Recommended: Unique string for your -# environment, e.g. "-JackStackBarbecue". Updated by make-version.pl -# Defaults to the environment variable WIRESHARK_VERSION_EXTRA - -VERSION_EXTRA=$(WIRESHARK_VERSION_EXTRA) - -# Banner shown at top right of Qt welcome screen. -!IFDEF WIRESHARK_VERSION_FLAVOR -VERSION_FLAVOR=$(WIRESHARK_VERSION_FLAVOR) -!ELSE -VERSION_FLAVOR=Development Build -!ENDIF - -# The version of the wiretap library. Recommended: Leave unchanged. -WTAP_VERSION_MAJOR=$(VERSION_MAJOR) -WTAP_VERSION_MINOR=$(VERSION_MINOR) -WTAP_VERSION_MICRO=0 - -##### Directories ##### - -# -# Base directory, where your libraries reside, which are needed to -# compile the sources. This setting is used only inside this file. -# This can be defined in the system environment. -# -!IFNDEF WIRESHARK_LIB_DIR -!IFDEF WIRESHARK_BASE_DIR -WIRESHARK_LIB_DIR=$(WIRESHARK_BASE_DIR)\$(PROGRAM_NAME)-$(WIRESHARK_TARGET_PLATFORM)-libs -!ELSE -WIRESHARK_LIB_DIR=C:\$(PROGRAM_NAME)-$(WIRESHARK_TARGET_PLATFORM)-libs -!ENDIF -!ENDIF - -# -# Base directory, where your programs reside. -# This setting is used only inside this file. -# -PROGRAM_FILES=$(PROGRAMFILES) -PROGRAM_FILES_W6432=$(PROGRAMW6432) - -# -# Location of the "tools" directory. This affects the path to textify.ps1 -!IFNDEF TOOLS_DIR -TOOLS_DIR=tools -!ENDIF - -# -# Machine type for the compiler and linker -# TARGET_MACHINE (Used for link /MACHINE) should be one of "X86" or "X64" -# (sorry ARM, Alpha, MIPS, and Itanium fans). -# CPU (Used by win32.mak) should be one of "i386" or "AMD64". -# PROCESSOR_ARCHITECTURE (Used for redistributable packages and -# manifests) should be one of "x86" or "amd64". -!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32" -TARGET_MACHINE=x86 -CPU=i386 -PROCESSOR_ARCHITECTURE=x86 -!else if "$(WIRESHARK_TARGET_PLATFORM)" == "win64" -TARGET_MACHINE=x64 -CPU=AMD64 -PROCESSOR_ARCHITECTURE=amd64 -!else -!error Your mysterious moon-man architecture "$(WIRESHARK_TARGET_PLATFORM)" frightens and confuses us. -!endif - - -##### Microsoft Visual C / Studio Variant ##### - -# Pick up the value from the environment, VS2012 onwards sets this via vcvarsall.bat -# For VS2010 and earlier you'll have to set the value yourself -# Assume that the lack of detection of Express editions doesn't matter -!IF "$(VISUALSTUDIOVERSION)" == "10.0" -MSVC_VARIANT=MSVC2010 -!ELSE IF "$(VISUALSTUDIOVERSION)" == "11.0" -MSVC_VARIANT=MSVC2012 -!ELSE IF "$(VISUALSTUDIOVERSION)" == "12.0" -MSVC_VARIANT=MSVC2013 -!ELSE IF "$(VISUALSTUDIOVERSION)" == "14.0" -MSVC_VARIANT=MSVC2015 -!ENDIF - -# For the different Studios, see: http://en.wikipedia.org/wiki/Microsoft_Visual_Studio -# Only one of the following MSVC_VARIANT settings should be used - -# "Microsoft Visual Studio 2008" -# Visual C++ 9.0, _MSC_VER 1500, msvcr90.dll -#MSVC_VARIANT=MSVC2008 - -# "Microsoft Visual C++ 2008 Express Edition" -# Visual C++ 9.0, _MSC_VER 1500, msvcr90.dll -#MSVC_VARIANT=MSVC2008EE - -# "Microsoft Visual Studio 2010" -# Visual C++ 10.0, _MSC_VER 1600, msvcr100.dll -#MSVC_VARIANT=MSVC2010 - -# "Microsoft Visual C++ 2010 Express Edition" -# Visual C++ 10.0, _MSC_VER 1600, msvcr100.dll -#MSVC_VARIANT=MSVC2010EE - -# "Microsoft Visual C++ 2012 Express Edition" -# Visual C++ 11.0, _MSC_VER 1700, msvcr110.dll -## Notes: -## 1. win32.mak is apparently not part of the MS 2012EE install; -## To build Windows Wireshark, win32.mak must be obtained [*] -## and copied to a dir specified in the Windows Environment -## variable 'include' (or to a dir added to the list in 'include'). -## Note that the 'include' environment variable is initialized -## when vcvarsall.bat is called to set up the build environment. -## [*]One possibility: download the Windows 7 Platform SDK and copy -## win32.mak from ...\Microsoft SDKs\Windows\v7.[something]\include -## See: https://ask.wireshark.org/questions/14343/setting-development-project-under-visual-studio-2012 -## 2. Dec 28,2012: "VS2012 Update 1" is required to use VS 2012 to build an .exe which -## will run on Windows XP (as well as on later versions of Windows). -## ToDo: It appears that some special setup is required to to do this. -## https://blogs.msdn.com/b/vcblog/archive/2012/10/08/10357555.aspx -## -#MSVC_VARIANT=MSVC2012EE - -# "Microsoft Visual Studio 2012" -# Visual C++ 11.0, _MSC_VER 1700, msvcr110.dll -#MSVC_VARIANT=MSVC2012 - -# "Microsoft Visual Studio 2013" -# Visual C++ 12.0, _MSC_VER 1800, msvcr120.dll -#MSVC_VARIANT=MSVC2013 - -# "Microsoft Visual Studio 2013 Express Edition" -# Visual C++ 12.0, _MSC_VER 1800, msvcr120.dll -## Notes: -## 1. win32.mak is apparently not part of the MS 2013EE install; -## To build Windows Wireshark, win32.mak must be obtained [*] -## and copied to a dir specified in the Windows Environment -## variable 'include' (or to a dir added to the list in 'include'). -## Note that the 'include' environment variable is initialized -## when vcvarsall.bat is called to set up the build environment. -## [*]One possibility: download the Windows 7 Platform SDK and copy -## win32.mak from ...\Microsoft SDKs\Windows\v7.[something]\include -## See: https://ask.wireshark.org/questions/14343/setting-development-project-under-visual-studio-2012 -#MSVC_VARIANT=MSVC2013EE - -# The default if we haven't set a system environment variable or -# uncommented an entry above. We default to the version recommended -# in the Developer's Guide, namely MSVC++ 2010 Express Edition. -!IFNDEF MSVC_VARIANT -MSVC_VARIANT=MSVC2010EE -!ENDIF - -# -# Optional: To compile some time critical code from assembler instead of C -# -# If you have the NASM compiler, set this to the NASM executable. -# http://nasm.sourceforge.net/ -# -# If you don't have NASM, comment this line out, so that NASM -# isn't defined. -# -NASM=$(WIRESHARK_LIB_DIR)\nasm-2.09.08\nasm.exe - -# -# The Python interpreter is used as part of the buildsystem -# -# This will override the automatic detection below. -#PYTHON_VER=27 -#PYTHON_DIR=C:\Python$(PYTHON_VER) - -# -# If you don't have the native Python package installed, you can use -# the Cygwin version (not recommended) -# -#PYTHON=env python - -# Santity check: native vs Cygwin Python options -!IF DEFINED(PYTHON) && DEFINED(PYTHON_DIR) -!ERROR PYTHON and PYTHON_DIR cannot be specified at the same time -!ENDIF - -# Find native Python automatically if PYTHON(_DIR) wasn't defined -!IF !DEFINED(PYTHON) && !DEFINED(PYTHON_DIR) -!IF EXIST(c:\tools\python2\python.exe) -# Chocolatey default -PYTHON_DIR=C:\tools\python2 -!ELSE IF EXIST(c:\Python27\python.exe) -PYTHON_VER=27 -!ELSE IF EXIST(c:\Python26\python.exe) -PYTHON_VER=26 -!ELSE IF EXIST(c:\Python25\python.exe) -PYTHON_VER=25 -!ELSE IF EXIST(c:\Python24\python.exe) -PYTHON_VER=24 -!ENDIF - -!IF DEFINED(PYTHON_VER) -PYTHON_DIR=C:\Python$(PYTHON_VER) -!ENDIF -!ENDIF - -!IF DEFINED(PYTHON_DIR) -PYTHON="$(PYTHON_DIR)\python.exe" -PATH=$(PYTHON_DIR);$(PATH) -!ENDIF - -# If all else fails, try to find it on the PATH -!IF !DEFINED(PYTHON) -PYTHON=python -!ENDIF - -#### Save files as pcap-ng by default. Comment out to use pcap instead. #### -PCAP_NG_DEFAULT=^#define PCAP_NG_DEFAULT 1 - -##### To Use packet editor uncomment this line #### -### Experimental - work in progress -WANT_PACKET_EDITOR=^#define WANT_PACKET_EDITOR 1 - -!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32" -DOWNLOAD_TAG=2016-05-10 -##### Win32 Libraries ##### -# -# Mandatory: GLib settings -# -# Please note: Since Wireshark release 1.0.0, we no longer support GLib1.x -# -GLIB_VERSION=2.0 - -# -# Mandatory: GLib, GTK & related library settings -# -# Please note: Since Wireshark release 1.0.0, we no longer support GTK1.x -# -# If you want building with GTK+, set GTK_DIR to the pathname of the -# directory in which the "include" and "lib" directories reside. -# -# Set the name to gtk3 if you want to use gtk3 -GTK_NAME=gtk2 -GTK_DIR=$(WIRESHARK_LIB_DIR)\$(GTK_NAME) - - -# These macros are used by the nsis installer script and by the install target. -#EXPAT_DLL=libexpat-1.dll -FFI_DLL=libffi-6.dll -FONTCONFIG_DLL=libfontconfig-1.dll -FREETYPE_DLL=libfreetype-6.dll -INTL_DLL=libintl-8.dll -HARFBUZZ_DLL=libharfbuzz-0.dll -JASPER_DLL=libjasper-1.dll -JPEG_DLL=libjpeg-8.dll -LZMA_DLL=liblzma-5.dll -PIXMAN_DLL=libpixman-1-0.dll -PNG_DLL=libpng15-15.dll -SJLJ_DLL=libgcc_s_sjlj-1.dll -TIFF_DLL=libtiff-5.dll -XML_DLL=libxml2-2.dll - -# This macro is used by the setup target. -!IF "$(GTK_NAME)" == "gtk2" -GDK_DLL=libgdk-win32-2.0-0.dll -GTK_DLL=libgtk-win32-2.0-0.dll -#GTK_PKG=2.24.10-2.7 -GTK_PKG=2.24.23-1.1 -PKG_SUFIX=ws -!ELSE -GDK_DLL=libgdk-3-0.dll -GTK_DLL=libgtk-3-0.dll -PKG_SUFIX=ws -GTK_PKG=3.4.4-2.1 -#GTK_PKG=3.6.1-1.1 -!ENDIF - -# -# Mandatory: Version numbers of GTK and pango. -# -# (MAJOR + MINOR Version number but without MICRO version number) -# These macros are used by the nsis installer script and by the setup target. -# -!IF "$(GTK_NAME)" == "gtk2" -GTK_INST_VERSION=2.24 -!ELSE -GTK_INST_VERSION=3.4 -#GTK_INST_VERSION=3.6 -!ENDIF - -# -# Recommended: Qt -# -# This must point to a top-level Qt directory. QMake should be in -# $(QT5_BASE_DIR)\bin -# -# Qt's various paths are hardcoded but with care you can relocate your -# installation directory: -# http://stackoverflow.com/questions/913642/qmake-and-qt-install-prefix-how-can-i-select-a-new-location-for-qt-library -# -# NOTE> the qmake command given below returns a path with forward slashes, -# which will need to be changed to backslashes for things to work properly -#QT5_BASE_DIR=output of "qmake -query QT_INSTALL_PREFIX" -!IF !DEFINED(QT5_BASE_DIR) -# Wireshark custom -!IF EXIST(C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws) -QT5_BASE_DIR=C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws -# Digia official -!ELSE IF EXIST(C:\Qt\Qt5.1.1\5.1.1\msvc2010) -QT5_BASE_DIR=C:\Qt\Qt5.1.1\5.1.1\msvc2010 -# Qt 5.2.1 web installer default paths -!ELSE IF EXIST(C:\Qt\5.2.1\msvc2010) -QT5_BASE_DIR=C:\Qt\5.2.1\msvc2010 -!ELSE IF EXIST(C:\Qt\5.2.1\msvc2012) -QT5_BASE_DIR=C:\Qt\5.2.1\msvc2012 -!ELSE IF EXIST(C:\Qt\5.2.1\msvc2012_64) -QT5_BASE_DIR=C:\Qt\5.2.1\msvc2012_64 -!ELSE IF EXIST(C:\Qt\Qt5.3.0\5.3\msvc2013) -QT5_BASE_DIR=C:\Qt\Qt5.3.0\5.3\msvc2013 -!ELSE IF EXIST(C:\Qt\5.3\msvc2013) -QT5_BASE_DIR=C:\Qt\5.3\msvc2013 -# Digia official, installed in $(WIRESHARK_LIB_DIR) -!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010) -QT5_BASE_DIR=$(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010 -!ENDIF -!ENDIF - -# -# Recommended: WinPcap developer's pack to capture network traffic. -# -# If you have the WinPcap developer's pack (at least version 3.0), -# set this to the directory in which the WinPcap developer's pack resides. -# -# If you don't have the WPdpack, comment this line out, so that -# PCAP_DIR isn't defined. -# -PCAP_DIR=$(WIRESHARK_LIB_DIR)\WPdpack -# This macro is used by the NSIS installer script, PortableApps, and by the -# setup target. -WINPCAP_VERSION=4_1_3 -WPD_VERSION=4_1_2 - -# -# Optional: WinPcap remote capture support and new API -# (pcap_open(), pcap_findalldevs_ex(), etc.) -# -PCAP_REMOTE=1 - -# -# Optional: The ZLib enables unzipping of gzip compressed capture files -# "on the fly". -# -# If you have Zlib, set this to directory in which the Zlib headers -# and .lib file are stored. -# -# If you don't have Zlib, comment this line out, so that ZLIB_DIR isn't -# defined. -ZLIB_DIR=$(WIRESHARK_LIB_DIR)\zlib-1.2.8-ws - -# -# Optional: the c-ares library enables asynchronous (nonblocking) DNS -# name resolvings. -# -# If you have c-ares, set this to the directory in which the c-ares -# .lib file is stored. -# -# If you're using Visual C++ 6.0, you'll have to use a platform SDK that -# defines socklen_t, such as Windows Server 2003 PSDK. -# -# If you don't have c-ares, comment this line out, so that C_ARES_DIR -# isn't defined. -# -C_ARES_PKG=1.11.0 - -# -# Optional: the GnuTLS library enables ssl decryption. -# -# If you have the GnuTLS library, set this to the package version. -# -# If you don't have GnuTLS, comment this line out, so that GNUTLS_PKG -# isn't defined. -# -# Platform SDK conflicts with openssl.h header -GNUTLS_PKG=3.2.15-2.7 -GPGERROR_DLL=libgpg-error-0.dll -GCC_DLL=libgcc_s_sjlj-1.dll - -# Optional: libssh library is required for sshdump and ciscodump support -# -# If you don't have libssh, comment this line out so that LIBSSH_DIR -# isn't defined. -# -LIBSSH_DIR=$(WIRESHARK_LIB_DIR)\libssh-0.7.2-win32ws - -# -# Optional: the KFW library enables kerberos/sasl/dcerpc decryption. -# -# If you have the kerberos for windows (mit) library, set this to the -# directory where the kfw package is stored. -# -# If you don't have KFW, comment this line out, so that KFW_DIR -# isn't defined. -# -KFW_DIR=$(WIRESHARK_LIB_DIR)\kfw-3-2-2-i386-ws-vc6 -COMERR_DLL=comerr32.dll -KRB5_DLL=krb5_32.dll -K5SPRT_DLL=k5sprt32.dll - -# Optional: the LUA library enables scripting support. -# -# If you have the LUA library, set this to the directory in which -# the LUA package is stored. -# -# If you don't have LUA, comment this line out, so that LUA_DIR -# isn't defined. -# -!IF "$(MSVC_VARIANT)" == "MSVC2015" || "$(MSVC_VARIANT)" == "MSVC2015CE" -LUA_DIST=-5.2.3_Win32_dll14 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" || "$(MSVC_VARIANT)" == "MSVC2013EE" -LUA_DIST=-5.2.3_Win32_dll12 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" || "$(MSVC_VARIANT)" == "MSVC2012EE" -LUA_DIST=-5.2.3_Win32_dll11 -!ELSE -LUA_DIST=-5.2.3_Win32_dll10 -!ENDIF -LUA_DIR=$(WIRESHARK_LIB_DIR)\lua5.2.3 - -# -# Optional: the PORTAUDIO library enables audio output for RTP streams. -# -# If you have the PORTAUDIO library (used for rtp_player), set this to -# the directory in which the PORTAUDIO library is stored. -# -# If you don't have PORTAUDIO, comment this line out, so that -# PORTAUDIO_DIR isn't defined. -# -#PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v18_1 -PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v19_2 - -# -# Version number of PortAudio -# -#PORTAUDIO_VERSION=18 -PORTAUDIO_VERSION=19 - -# -# Optional: AirPcap developer's pack to capture wireless network traffic -# incl. 802.11 management frames. -# -# If you have the AirPcap developer's pack, set this to the directory -# in which the AirPcap developer's pack resides. -# -# If you don't have the AirPcap developer's pack, comment this line out, -# so that AIRPCAP_DIR isn't defined. -# -AIRPCAP_DIR=$(WIRESHARK_LIB_DIR)\AirPcap_Devpack_4_1_0_1622\AirPcap_Devpack - -# -# Optional: LIBSMI, System Management Interface -# -# Used for oid-name resolution for SNMP and other protocols -# -SMI_PKG=svn-40773 - -# -# Optional: GeoIP, IP address database lookups -# -# Used to map IP addresses to MaxMind GeoIP database entries -GEOIP_PKG=1.6.6 - -# -# Optional: WinSparkle, software updates -# -# Used for automatic software updates -# -WINSPARKLE_PKG=0.3-44-g2c8d9d3-win32ws - -!else -DOWNLOAD_TAG=2016-06-03 -##### Win64 Libraries ##### -# -# Mandatory: GLib settings -# -# Please note: Since Wireshark release 1.0.0, we no longer support GLib1.x -# -GLIB_VERSION=2.0 - -# -# Mandatory: GLib, GTK & related library settings -# -# Please note: Since Wireshark release 1.0.0, we no longer support GTK1.x -# -# If you want building with GTK+, set GTK_DIR to the pathname of the -# directory in which the "include" and "lib" directories reside. -# -# -# Set the name to gtk3 if you want to use gtk3 - (experimental ?) -GTK_NAME=gtk2 -GTK_DIR=$(WIRESHARK_LIB_DIR)\$(GTK_NAME) - -# These macros are used by the nsis installer script and by the install target. -#EXPAT_DLL=libexpat-1.dll -FFI_DLL=libffi-6.dll -FONTCONFIG_DLL=libfontconfig-1.dll -FREETYPE_DLL=libfreetype-6.dll -INTL_DLL=libintl-8.dll -HARFBUZZ_DLL=libharfbuzz-0.dll -JASPER_DLL=libjasper-1.dll -JPEG_DLL=libjpeg-8.dll -LZMA_DLL=liblzma-5.dll -PIXMAN_DLL=libpixman-1-0.dll -PNG_DLL=libpng16-16.dll -#SEH_DLL=libgcc_s_seh-1.dll -TIFF_DLL=libtiff-5.dll -XML_DLL=libxml2-2.dll - -# These macros are used by the setup target. -!IF "$(GTK_NAME)" == "gtk2" -GDK_DLL=libgdk-win32-2.0-0.dll -GTK_DLL=libgtk-win32-2.0-0.dll -GTK_PKG=2.24.23-3.39-1 -#GTK_PKG=2.24.23-1.1 -PKG_SUFIX=ws -!ELSE -GDK_DLL=libgdk-3-0.dll -GTK_DLL=libgtk-3-0.dll -PKG_SUFIX=ws -GTK_PKG=3.4.4-2.1 -#GTK_PKG=3.6.1-1.1 -!ENDIF - -# -# Mandatory: Version numbers of GTK and pango. -# -# (MAJOR + MINOR Version number but without MICRO version number) -# These macros are used by the nsis installer script and by the setup target. -# -!IF "$(GTK_NAME)" == "gtk2" -#GTK_INST_VERSION=2.16 -GTK_INST_VERSION=2.24 -!ELSE -#GTK_INST_VERSION=3.4 -GTK_INST_VERSION=3.6 -!ENDIF - -# -# Recommended: Qt -# -# This must point to a top-level Qt directory. QMake should be in -# $(QT5_BASE_DIR)\bin -# -# Qt's various paths are hardcoded but with care you can relocate your -# installation directory: -# http://stackoverflow.com/questions/913642/qmake-and-qt-install-prefix-how-can-i-select-a-new-location-for-qt-library -# -#QT5_BASE_DIR=output of "qmake -query QT_INSTALL_PREFIX" -!IF !DEFINED(QT5_BASE_DIR) -# Wireshark custom -!IF EXIST(C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws) -QT5_BASE_DIR=C:\Qt\Qt-5.1.1-MSVC2010-$(WIRESHARK_TARGET_PLATFORM)-ws -# Digia official -!ELSE IF EXIST(C:\Qt\Qt5.1.1\5.1.1\msvc2010) -QT5_BASE_DIR=C:\Qt\Qt5.1.1\5.1.1\msvc2010 -!ELSE IF EXIST(C:\Qt\5.3\msvc2013_64) -QT5_BASE_DIR=C:\Qt\5.3\msvc2013_64 -# Digia official, installed in $(WIRESHARK_LIB_DIR) -!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010) -QT5_BASE_DIR=$(WIRESHARK_LIB_DIR)\Qt5.1.1\5.1.1\msvc2010 -!ENDIF -!ENDIF - -# -# Recommended: WinPcap developer's pack to capture network traffic. -# -# If you have the WinPcap developer's pack (at least version 3.0), -# set this to the directory in which the WinPcap developer's pack resides. -# -# If you don't have the WPdpack, comment this line out, so that -# PCAP_DIR isn't defined. -# -PCAP_DIR=$(WIRESHARK_LIB_DIR)\WPdpack -# This macro is used by the NSIS installer script, PortableApps, and by the -# setup target. -WINPCAP_VERSION=4_1_3 -WPD_VERSION=4_1_2 - -# -# Optional: WinPcap remote capture support and new API -# (pcap_open(), pcap_findalldevs_ex(), etc.) -# -PCAP_REMOTE=1 - -# -# Optional: The ZLib enables unzipping of gzip compressed capture files -# "on the fly". -# -# If you have Zlib, set this to directory in which the Zlib headers -# and .lib file are stored. -# -# If you don't have Zlib, comment this line out, so that ZLIB_DIR isn't -# defined. -# -ZLIB_DIR=$(WIRESHARK_LIB_DIR)\zlib-1.2.8-ws - -# -# Optional: the c-ares library enables asynchronous (nonblocking) DNS -# name resolvings. -# -# If you have c-ares, set this to the directory in which the c-ares -# .lib file is stored. -# -# If you're using Visual C++ 6.0, you'll have to use a platform SDK that -# defines socklen_t, such as Windows Server 2003 PSDK. -# -# If you don't have c-ares, comment this line out, so that C_ARES_DIR -# isn't defined. -# -C_ARES_PKG=1.11.0 - -# -# Optional: the GnuTLS library enables ssl decryption. -# -# If you have the GnuTLS library, set this to the package version. -# -# If you don't have GnuTLS, comment this line out, so that GNUTLS_PKG -# isn't defined. -# -# Platform SDK conflicts with openssl.h header -GNUTLS_PKG=3.2.15-2.9 -GPGERROR_DLL=libgpg-error6-0.dll -GCC_DLL=libgcc_s_seh-1.dll - -# -# Optional: libssh library is required for sshdump support -# -# If you don't have libssh, comment this line out so that LIBSSH_DIR -# isn't defined. -# -LIBSSH_DIR=$(WIRESHARK_LIB_DIR)\libssh-0.7.2-win64ws - -# -# Optional: the KFW library enables kerberos/sasl/dcerpc decryption. -# -# If you have the kerberos for windows (mit) library, set this to the -# directory where the kfw package is stored. -# -# If you don't have KFW, comment this line out, so that KFW_DIR -# isn't defined. -# -KFW_DIR=$(WIRESHARK_LIB_DIR)\kfw-3-2-2-x64-ws -COMERR_DLL=comerr64.dll -KRB5_DLL=krb5_64.dll -K5SPRT_DLL=k5sprt64.dll - -# -# Optional: the LUA library enables scripting support. -# -# If you have the LUA library, set this to the directory in which -# the LUA package is stored. -# -# If you don't have LUA, comment this line out, so that LUA_DIR -# isn't defined. -# -!IF "$(MSVC_VARIANT)" == "MSVC2015" || "$(MSVC_VARIANT)" == "MSVC2015CE" -LUA_DIST=-5.2.3_Win64_dll14 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" || "$(MSVC_VARIANT)" == "MSVC2013EE" -LUA_DIST=-5.2.3_Win64_dll12 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" || "$(MSVC_VARIANT)" == "MSVC2012EE" -LUA_DIST=-5.2.3_Win64_dll11 -!ELSE -LUA_DIST=-5.2.3_Win64_dll10 -!ENDIF -LUA_DIR=$(WIRESHARK_LIB_DIR)\lua5.2.3 - -# -# Optional: the PORTAUDIO library enables audio output for RTP streams. -# -# If you have the PORTAUDIO library (used for rtp_player), set this to -# the directory in which the PORTAUDIO library is stored. -# -# If you don't have PORTAUDIO, comment this line out, so that -# PORTAUDIO_DIR isn't defined. -# -#PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v18_1 -PORTAUDIO_DIR=$(WIRESHARK_LIB_DIR)\portaudio_v19_2 - -# -# Version number of PortAudio -# -#PORTAUDIO_VERSION=18 -PORTAUDIO_VERSION=19 - -# -# Optional: AirPcap developer's pack to capture wireless network traffic -# incl. 802.11 management frames. -# -# If you have the AirPcap developer's pack, set this to the directory -# in which the AirPcap developer's pack resides. -# -# If you don't have the AirPcap developer's pack, comment this line out, -# so that AIRPCAP_DIR isn't defined. -# -AIRPCAP_DIR=$(WIRESHARK_LIB_DIR)\AirPcap_Devpack_4_1_0_1622\AirPcap_Devpack - -# -# Optional: LIBSMI, System Management Interface -# -# Used for oid-name resolution for SNMP and other protocols -# -SMI_PKG=svn-40773 - -# -# Optional: GeoIP, IP address database lookups -# -# Used to map IP addresses to MaxMind GeoIP database entries -# -GEOIP_PKG=1.6.6 - -# -# Optional: WinSparkle, software updates -# -# Used for automatic software updates -# -WINSPARKLE_PKG=0.3-44-g2c8d9d3-win64ws - -!endif -##### win32 / win64 ##### - -!IF "$(GTK_NAME)" == "gtk2" -GTK_ETC_DIR=etc\gtk-2.0 -GTK_ENGINES_DIR=lib\gtk-2.0\$(GTK_LIB_DIR)\engines -GTK_MODULES_DIR=lib\gtk-2.0\modules -GTK_THEMES_DIR=share\themes\MS-Windows\gtk-2.0 -!ELSE -GTK_ETC_DIR=etc\gtk-3.0 -GTK_SCHEMAS_DIR=\share\glib-2.0\schemas -!ENDIF - - -##### Tools ##### - -# Set the following mandatory commands to find the tools. -# The easiest way is to use the corresponding packages from Cygwin. - -# Set up the path to the Cygwin binaries -# First check whether a 32-bit Cygwin installation exists -# If not, check for a 64-bit Cygwin installation -!IF EXIST($(CYGWIN_PATH)) -# Do nothing -!ELSE IF EXIST(C:\cygwin\bin) -CYGWIN_PATH=C:\cygwin\bin -!ELSE IF EXIST(C:\cygwin64\bin) -CYGWIN_PATH=C:\cygwin64\bin -!ELSE IF EXIST(C:\tools\cygwin\bin) -# Chocolatey default -CYGWIN_PATH=C:\tools\cygwin\bin -!ELSE -!ERROR Could not locate Cygwin, please set CYGWIN_PATH explicitly in config.nmake -!ENDIF - -# command for a shell (cygwin's bash package recommended) -SH_PROG=bash - -# bash versions after 3.1.6 need the 'igncr' shell option to be able to -# process scripts in Windows 'native format' (dos crlf format). -# The following !IF results in the option being used only if it is available -# since using it on bash version 3.1.6 (or earlier) is not required and -# will cause an error message. -!if "$(SH_PROG)"=="bash" && [$(CYGWIN_PATH)\bash -c "set -o igncr" 2>nul: ] == 0 -SH_FLAGS=-o igncr -!endif - -SH=$(SH_PROG) $(SH_FLAGS) - -# PowerShell -# Compatibility testing (...or should we always force version 2?) -#POWERSHELL=powershell -Version 2.0 -executionpolicy bypass -File -# Normal -POWERSHELL=powershell -executionpolicy bypass -File - -# command for perl (cygwin's perl package recommended) -PERL=perl - -# command for pod2man and pod2html -# (part of the perl package, usually leave these unchanged) -POD2MAN=$(SH) pod2man -POD2HTML=$(SH) pod2html - -# command for sed (cygwin's sed recommended) -SED=sed - -# Command for Flex. Cygwin's flex or Chocolatey's win_flex -# recommended. -# Absolute or relative paths must be Windows-style - -#LEX=\custom\path\to\flex - -# Find flex automatically -!IF !DEFINED(LEX) -!IF DEFINED(CHOCOLATEYINSTALL) && EXIST("$(CHOCOLATEYINSTALL)\bin\win_flex.exe") -LEX=$(CHOCOLATEYINSTALL)\bin\win_flex -!ELSE IF EXIST("$(CYGWIN_PATH)\flex.exe") -# We add Cygwin to PATH below. -LEX=flex -!ENDIF -!ENDIF - -# Command for Bison. Cygwin's bison or Chocolatey's win_bison -# recommended. -# Absolute or relative paths must be Windows-style - -#YACC=\custom\path\to\bison - -# Find bison automatically -!IF !DEFINED(YACC) -!IF DEFINED(CHOCOLATEYINSTALL) && EXIST("$(CHOCOLATEYINSTALL)\bin\win_bison.exe") -YACC=$(CHOCOLATEYINSTALL)\bin\win_bison -!ELSE IF EXIST("$(CYGWIN_PATH)\bison.exe") -# We add Cygwin to PATH below. -YACC=bison -!ENDIF -!ENDIF - -# Make our text files Windows-native -TEXTIFY=$(POWERSHELL) $(TOOLS_DIR)/textify.ps1 - -# -# Optional: Build the NSIS installer. -# -# If NSIS is installed in a standard location (under Program Files -# or Program Files (x86)) you shouldn't have to change anything. -# -# If NSIS is installed in a custom location uncomment the following -# line and adjust the path accordingly. -# - -#MAKENSIS="\custom\path\to\NSIS\makensis.exe" - -# Find NSIS automatically -!IF !DEFINED(MAKENSIS) -!IF EXIST("$(PROGRAM_FILES)\NSIS\makensis.exe") -MAKENSIS="$(PROGRAM_FILES)\NSIS\makensis.exe" -!ELSE IF EXIST("$(PROGRAM_FILES_W6432)\NSIS\makensis.exe") -MAKENSIS="$(PROGRAM_FILES_W6432)\NSIS\makensis.exe" -!ELSE IF EXIST("\Program Files (x86)\NSIS\makensis.exe") -MAKENSIS="\Program Files (x86)\NSIS\makensis.exe" -!ENDIF -!ENDIF - -# -# Optional: Build the PortableApps package (WiresharkPortable). -# -# If you have the PortableApps.com Platform installed set this to the main -# PortableApps directory. In order to build packages you need to install -# "PortableApps.com Launcher" and "NSIS Portable (Unicode)" *within* the -# PortableApps environment. -# -# If you don't have the PortableApps.com Platform installed comment this line -# out. -# -PORTABLEAPPS_DIR="C:\PortableApps" - -# -# Optional: To build the developers API documentation with doxygen and dot. -# Currently experimental, outdated and incomplete. -# -# You will have to download and install: -# Doxygen from: http://www.doxygen.org -# Graphviz from: http://www.research.att.com/sw/tools/graphviz/ -# -# If you have doxygen, set this to the doxygen executable. -# -# If you don't want the developers documentation (or don't have the tools), -# comment this line out, so that DOXYGEN isn't defined. -# -#DOXYGEN="$(PROGRAM_FILES)/doxygen/bin/doxygen.exe" - -# -# Recommended: Use the compressed html help format .chm as the Wireshark integrated help. -# -# The required htmlhelp.h and htmlhelp.lib should be included in versions of MSVC supported by Wireshark -# -# If you don't want the online help (or don't have the tools), -# comment this line out, so that HHC_DIR isn't defined. -# -HHC_DIR=$(PROGRAM_FILES)\HTML Help Workshop - -# -# Optional: To reduce the size of dlls and exes, which is especially useful for -# USB device distributions (PortableApps) -# -# If you have the UPX package, set this to the upx.exe executable. -# -# UPX can be downloaded from: -# http://upx.sourceforge.net/ -# -# If you don't have UPX, or don't want to pack exes and dlls, -# comment this line out, so that UPX isn't defined. -# - -UPX=$(WIRESHARK_LIB_DIR)\upx303w\upx.exe - -##### Flags, PATHs and Miscellaneous ##### - -# "convert" the MSVC variant into the required MSC compiler version -!IF "$(MSVC_VARIANT)" == "MSVC2005" || "$(MSVC_VARIANT)" == "MSVC2005EE" || "$(MSVC_VARIANT)" == "DOTNET20" -MSC_VER_REQUIRED=1400 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2008" || "$(MSVC_VARIANT)" == "MSVC2008EE" -MSC_VER_REQUIRED=1500 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010" || "$(MSVC_VARIANT)" == "MSVC2010EE" -MSC_VER_REQUIRED=1600 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" || "$(MSVC_VARIANT)" == "MSVC2012EE" -MSC_VER_REQUIRED=1700 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" || "$(MSVC_VARIANT)" == "MSVC2013EE" -MSC_VER_REQUIRED=1800 -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2015" || "$(MSVC_VARIANT)" == "MSVC2015CE" -MSC_VER_REQUIRED=1900 -!ELSE -!ERROR MSVC_VARIANT unknown -!ENDIF - -## Manifest processing is not needed for VC10 (Visual Studio 2010 C) -## See: http://msdn.microsoft.com/en-us/library/dd293574.aspx -!IF ($(MSC_VER_REQUIRED) >= 1400) && ($(MSC_VER_REQUIRED) < 1600) -MANIFEST_INFO_REQUIRED=1 -!ENDIF - -## VS2012 (VC11) and later: configure subsystem version -## See: https://blogs.msdn.com/b/vcblog/archive/2012/10/08/10357555.aspx -## (APPVER used in win32.mak to set subsystem version) -!IF ($(MSC_VER_REQUIRED) >= 1700) -!if "$(WIRESHARK_TARGET_PLATFORM)" == "win32" -APPVER=5.01 -!else -APPVER=5.02 -!endif -!ENDIF - -# Compiler flags: -# /W3 Warning level 3 (0 less - 4 most, 1 default). -# /Zi Create .pdb file for debugging. -# /MD Use "multithread- and DLL-specific version" of run-time libraries. -# msvc documentation states that /MD causes _MT and _DLL to be defined -# See: http://msdn.microsoft.com/en-us/library/2kzt1wy3%28v=VS.90%29.aspx -# /D_CRT_SECURE_NO_DEPRECATE Don't warn for "insecure" calls; -# see MSDN "Security Enhancements in the CRT". -# /D_CRT_NONSTDC_NO_DEPRECATE Don't warn for "Deprecated CRT Functions" as MSDN calls this. -# /D_BIND_TO_CURRENT_CRT_VERSION=1 Make sure our CRT and manifest versions match. -# (http://msdn.microsoft.com/en-us/library/cc664727.aspx) -# /DWIN32_LEAN_AND_MEAN Don't include unnecessary Windows include files (see windows.h). -# /MANIFEST:no Don't create a SxS manifest. Makes sure our plugins don't load -# a second copy of the CRT. -# -DPSAPI_VERSION=1 Programs that must run on earlier versions of Windows as well as Windows 7 and later -# versions should always call this function as GetProcessMemoryInfo. To ensure correct -# resolution of symbols, add Psapi.lib to the TARGETLIBS macro and compile the program -# with -DPSAPI_VERSION=1.To use run-time dynamic linking, load Psapi.dll. -# http://msdn.microsoft.com/en-us/library/windows/desktop/ms683219(v=vs.85).aspx -# -DBUILD_WINDOWS Starting from VS2013, GetVersionEx is deprecated and we are recommended to use -# VerifyVersionInfo instead -# http://msdn.microsoft.com/en-us/library/windows/desktop/ms724429(v=vs.85).aspx -# http://msdn.microsoft.com/en-us/library/windows/desktop/ms725491(v=vs.85).aspx -# To continue to use GetVersionEx, we can define BUILD_WINDOWS -# -D_ALLOW_KEYWORD_MACROS For VS2012 onwards the, C++ STL does not permit macro redefinitions of keywords -# (see http://msdn.microsoft.com/en-us/library/bb531344(v=vs.110).aspx) -# This definition prevents the complaint about the redefinition of inline by WinPCap -# in pcap-stdinc.h when compiling CPP files, e.g. the QT UI -# /O2 http://msdn.microsoft.com/en-us/library/8f8h5cxt.aspx -# Specifying the /O2 compiler option is the same as using the following options: -# /Ob (Inline Function Expansion), where the option parameter is 2 (/Ob2) -# /Og (Global Optimizations) -# /Oi (Generate Intrinsic Functions) -# /Ot (Favor Fast Code) -# /Oy (Frame-Pointer Omission) -# /Gs (Control Stack Checking Calls)) -# /GF (Eliminate Duplicate Strings) -# /Gy (Enable Function-Level Linking) -# /Zo Output debug info allowing debuggers to display local values and trace into inline -# functions. For VS2013 Update 3. Assume all VS2013 builds are at least Update 3. -# See http://msdn.microsoft.com/en-us/library/dn785163.aspx -# VS2015: On by default when /Zi or /Z7 used. - -!IF DEFINED(DEBUG) -DEBUG_CFLAGS=/Od -!ELSE -DEBUG_CFLAGS=/O2 -!ENDIF - -##Note: LOCAL_CFLAGS are flags used for *all* compilations -## STANDARD_CFLAGS (see below) are flags used just for *Wireshark* compilations -!IF "$(MSVC_VARIANT)" == "MSVC2005" || \ - "$(MSVC_VARIANT)" == "MSVC2005EE" || \ - "$(MSVC_VARIANT)" == "DOTNET20" || \ - "$(MSVC_VARIANT)" == "MSVC2008" || \ - "$(MSVC_VARIANT)" == "MSVC2008EE" || \ - "$(MSVC_VARIANT)" == "MSVC2010" || \ - "$(MSVC_VARIANT)" == "MSVC2010EE" || \ - "$(MSVC_VARIANT)" == "MSVC2012" || \ - "$(MSVC_VARIANT)" == "MSVC2012EE" || \ - "$(MSVC_VARIANT)" == "MSVC2013" || \ - "$(MSVC_VARIANT)" == "MSVC2013EE" || \ - "$(MSVC_VARIANT)" == "MSVC2015" || \ - "$(MSVC_VARIANT)" == "MSVC2015CE" -LOCAL_CFLAGS=/Zi /W3 /MD $(DEBUG_CFLAGS) /DWIN32_LEAN_AND_MEAN /DMSC_VER_REQUIRED=$(MSC_VER_REQUIRED) \ - /D_CRT_SECURE_NO_DEPRECATE -DPSAPI_VERSION=1 - -!IF "$(MSVC_VARIANT)" == "MSVC2012" || \ - "$(MSVC_VARIANT)" == "MSVC2012EE" || \ - "$(MSVC_VARIANT)" == "MSVC2013" || \ - "$(MSVC_VARIANT)" == "MSVC2013EE" || \ - "$(MSVC_VARIANT)" == "MSVC2015" || \ - "$(MSVC_VARIANT)" == "MSVC2015CE" -LOCAL_CFLAGS=$(LOCAL_CFLAGS) /D_ALLOW_KEYWORD_MACROS -!ENDIF - -!IF "$(MSVC_VARIANT)" == "MSVC2013" || \ - "$(MSVC_VARIANT)" == "MSVC2013EE" || \ - "$(MSVC_VARIANT)" == "MSVC2015" || \ - "$(MSVC_VARIANT)" == "MSVC2015CE" -LOCAL_CFLAGS=$(LOCAL_CFLAGS) /DBUILD_WINDOWS /Zo -!ENDIF - -!IF "$(WIRESHARK_TARGET_PLATFORM)" != "win64" -LOCAL_CFLAGS=$(LOCAL_CFLAGS) /D_BIND_TO_CURRENT_CRT_VERSION=1 -!ENDIF - -# Additional compiler warnings to be treated as "Level 3" -# when compiling Wireshark sources. (Selected from "level 4" warnings). -## 4295: array is too small to include a terminating null character -## 4189: local variable is initialized but not referenced -WARNINGS_CFLAGS=/w34295 /w34189 - -!ELSE -!ERROR MSVC_VARIANT unknown -!ENDIF - -# http://msdn.microsoft.com/en-us/library/bb385193.aspx -# /MP Compiles multiple source files by using multiple processes -# /MP[processMax] If you omit the processMax argument, the compiler retrieves the number of effective processors -# on your computer from the operating system, and creates a process for each processor. -# -# The following compiler options and language features that are incompatible with the /MP option: -# -# * #import preprocessor directive -# * /E, /EP -# * /Gm -# * /showIncludes -# * /Yc -# -!IF "$(MSVC_VARIANT)" == "MSVC2008" || \ - "$(MSVC_VARIANT)" == "MSVC2008EE" || \ - "$(MSVC_VARIANT)" == "MSVC2010" || \ - "$(MSVC_VARIANT)" == "MSVC2010EE" || \ - "$(MSVC_VARIANT)" == "MSVC2012" || \ - "$(MSVC_VARIANT)" == "MSVC2012EE" || \ - "$(MSVC_VARIANT)" == "MSVC2013" || \ - "$(MSVC_VARIANT)" == "MSVC2013EE" || \ - "$(MSVC_VARIANT)" == "MSVC2015" || \ - "$(MSVC_VARIANT)" == "MSVC2015CE" -LOCAL_CFLAGS= $(LOCAL_CFLAGS) /MP -!ENDIF - -# Optional: Static analysis. Only supported in the full-frontal MSVC editions. -# http://msdn.microsoft.com/en-us/library/ms182025.aspx - -!IFDEF ENABLE_CODE_ANALYSIS -LOCAL_CFLAGS= $(LOCAL_CFLAGS) /analyze:WX- -!ENDIF - -## Do *not* redefine LOCAL_CFLAGS below this point !! - -#STANDARD_CFLAGS are flags used for *Wireshark* compiles (not stuff like lemon, etc) -STANDARD_CFLAGS=/DWINPCAP_VERSION=$(WINPCAP_VERSION) $(LOCAL_CFLAGS) $(WARNINGS_CFLAGS) - -#Comment out the following if warnings are not to be treated as errors -WARNINGS_ARE_ERRORS=-WX - -# Linker flags: -# /DEBUG generate debug info -# /PROFILE generate map file(s) for profiling -# /DEFAULTLIB:xxx use xxx as the standard C library -# /NODEFAULTLIB:xxx don't use xxx as the standard C library -# /RELEASE set the checksum in the header, stops debugger complaints -# -LOCAL_LDFLAGS=/DEBUG /MACHINE:$(TARGET_MACHINE) /RELEASE -DLL_LDFLAGS = -!IFDEF MANIFEST_INFO_REQUIRED -DLL_LDFLAGS = /MANIFEST:no -!ENDIF - -# Enable Safe Exception Handler. -# http://msdn.microsoft.com/en-us/magazine/cc337897.aspx -!IF $(MSC_VER_REQUIRED) >= 1300 -!IF "$(WIRESHARK_TARGET_PLATFORM)" != "win64" -LOCAL_LDFLAGS= $(LOCAL_LDFLAGS) /SafeSEH -!ENDIF -!ENDIF - -# Enable ASLR. Requires VS2008 or later. -# http://blogs.msdn.com/b/vcblog/archive/2009/05/21/dynamicbase-and-nxcompat.aspx -# DEP (/NXCompat) is handled in init_process_policies() via SetProcessDEPPolicy. - -# ASLR http://msdn.microsoft.com/en-us/library/bb384887.aspx -!IF $(MSC_VER_REQUIRED) >= 1500 -LOCAL_LDFLAGS= $(LOCAL_LDFLAGS) /DYNAMICBASE /FIXED:no -!ENDIF - -PLUGIN_LDFLAGS = /NOLOGO /INCREMENTAL:no $(LOCAL_LDFLAGS) $(DLL_LDFLAGS) - -# -# According to http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=403 -# XCOPY under Windows NT doesn't support the "/Y" flag. This works -# around that bug. -# XXX - This apparently doesn't work for some versions of nmake: -# http://support.microsoft.com/default.aspx?scid=kb;en-us;86814 -# It looks like we'll have to call "set copycmd=/y" before we run xcopy. -COPYCMD=/y - -# -# If you don't want to build libwireshark.dll, you should comment out the -# following line. (Note: for plugin support this option must stay activated) -ENABLE_LIBWIRESHARK=USE - -# -# install (debug) directory for Wireshark (relative to your source dir) -INSTALL_DIR=wireshark-gtk2 -INSTALL_DIR_QT=wireshark-qt-release - -##### C-Runtime Redistributable ##### -# -# The C-Runtime since Version 7 must be shipped together with -# the program installer, to avoid missing msvcr*.dll files on -# the target machine. -# -# The location of these files differ on the various compiler -# packages, the following will use the default paths depending -# on the package version. -# - -# You can either place the redistributable in its own platform- -# and compiler-specific directory or in the top-level library -# directory. -# Microsoft maintains a list of the latest redistributables in -# KB 20197667: http://support.microsoft.com/kb/2019667 -!IF EXIST("$(WIRESHARK_LIB_DIR)\vcredist_$(MSVC_VARIANT)") -VCREDIST_DIR=$(WIRESHARK_LIB_DIR)\vcredist_$(MSVC_VARIANT) -!ELSE -VCREDIST_DIR=$(WIRESHARK_LIB_DIR) -!ENDIF - -!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win64" -# -# For 64-bit platforms, we don't create portable packages and therefore -# don't have to worry that "Using the Visual C++ Redistributable -# Package" requires that an installer be run to install that package, -# so we use that method to make the C runtime available. -# -VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe - -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2005" -# -# For MSVC 2005 non-Express Edition, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC80.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(PROCESSOR_ARCHITECTURE)\Microsoft.VC80.CRT\*.* - -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2005EE" || "$(MSVC_VARIANT)" == "DOTNET20" || "$(MSVC_VARIANT)" == "MSVC2008EE" -# -# For MSVC 2005 Express Edition, for the .NET Framework 2.0 SDK, and -# for MSVC 2008 Express Edition, we "Use the Visual C++ Redistributable -# Package", because they don't provide the Microsoft.VC80.CRT folder. -# -# They also don't provide the redistributable package, so you need to -# download the appropriate version of the redistributable package, -# vcredist_x86.exe, vcredist_x64.exe, or vcredist_ia64.exe, from -# Microsoft first, and copy it to the lib folder!!! -# -VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe - -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2008" -# -# For MSVC 2008 non-Express Edition, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC90.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(PROCESSOR_ARCHITECTURE)\Microsoft.VC90.CRT\*.* - -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010EE" -# -# For MSVC 2010 Express Edition, we "Use the Visual C++ Redistributable -# Package", because it doesn't provide the Microsoft.VC80.CRT folder. -# -# It also doesn't provide the redistributable package, so you need to -# download the appropriate version of the redistributable package, -# vcredist_x86.exe or vcredist_x64.exe, from Microsoft first, and copy -# it to the lib folder!!! -VCREDIST_EXE=$(VCREDIST_DIR)\vcredist_$(TARGET_MACHINE).exe - -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2010" -# -# For MSVC 2010 non-Express Edition, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC100.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -# Note: for what it's worth, Microsoft recommends "Using the Visual C++ -# Redistributable Package", rather than "Installing a particular Visual -# C++ assembly as a private assembly for the application", starting -# with Visual Studio 2010. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC100.CRT\*.* -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2012" || "$(MSVC_VARIANT)" == "MSVC2012EE" -# -# EE version added as per bug https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9227 -# -# For MSVC 2012, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC110.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -# Note: for what it's worth, Microsoft recommends "Using the Visual C++ -# Redistributable Package", rather than "Installing a particular Visual -# C++ assembly as a private assembly for the application", starting -# with Visual Studio 2010. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC110.CRT\*.* -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2013" || "$(MSVC_VARIANT)" == "MSVC2013EE" -# -# EE version added as per bug https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9227 -# -# For MSVC 2013, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC120.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -# Note: for what it's worth, Microsoft recommends "Using the Visual C++ -# Redistributable Package", rather than "Installing a particular Visual -# C++ assembly as a private assembly for the application", starting -# with Visual Studio 2010. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC120.CRT\*.* -!ELSEIF "$(MSVC_VARIANT)" == "MSVC2015" || "$(MSVC_VARIANT)" == "MSVC2015CE" -# -# For MSVC 2015, we "Install a particular Visual C++ -# assembly as a private assembly for the application", by copying -# the contents of the Microsoft.VC140.CRT folder to the target directory. -# This is done to reduce the size of the installer; it also makes -# a portable version work, as the C runtime doesn't have to be -# installed on the target machine. -# -# Note: for what it's worth, Microsoft recommends "Using the Visual C++ -# Redistributable Package", rather than "Installing a particular Visual -# C++ assembly as a private assembly for the application", starting -# with Visual Studio 2010. -# -MSVCR_DLL=$(VCINSTALLDIR)\redist\$(TARGET_MACHINE)\Microsoft.VC140.CRT\*.* -!ELSE -!ERROR MSVC_VARIANT unknown -!ENDIF - -# This is still optional yet we define it above for all users. -# So, don't check if it exists... -#!IF DEFINED(VCREDIST_EXE) && ! EXIST("$(VCREDIST_EXE)") -#!ERROR Can't find $(VCREDIST_EXE). Have you downloaded it from Microsoft? \ -#See the developer's guide section "C-Runtime "Redistributable" files" for details how to get it -#!ENDIF - -##### Advanced: Docbook/XML documentation generation ##### -# If you want to generate the Docbook/XML based docs (User's and Developer's -# Guide, ...), you'll need some additional tools / libraries compared to the -# rest of the build process. -# -# FOR DETAILED INSTRUCTIONS TO GENERATE THE DOCS, SEE: docbook\README.txt. -# -# If you don't call the Makefile.nmake in the docbook dir to generate the -# docs, the following settings in this section will have no effect. - -# formatting objects processor executable -# Comment this out if you don't have fop installed or you don't want the docs -# in PDF format. -# -# You may want to install the FOP hyphenation patterns from -# http://offo.sourceforge.net/hyphenation/ -!IFNDEF FOP - -!IF EXIST(docbook\fop-1.1\fop.bat) -FOP=fop-1.1\fop.bat -!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\fop-1.1\fop.bat) -FOP=$(WIRESHARK_LIB_DIR)\fop-1.1\fop.bat -!ELSE IF EXIST(docbook\fop-1.0\fop.bat) -FOP=fop-1.0\fop.bat -!ELSE IF EXIST($(WIRESHARK_LIB_DIR)\fop-1.0\fop.bat) -FOP=$(WIRESHARK_LIB_DIR)\fop-1.0\fop.bat -!ENDIF - -!ENDIF FOP - -# Additional options to fop. -FOP_OPTS=-Xmx256m - -# the XSL processor (part of cygwin's libxslt package) -XSLTPROC="xsltproc" - -# Asciidoc converter (part of cygwin's asciidoc package). In order to build -# the release notes you must have the Cygwin asciidoc and lynx packages -# installed. -A2X=a2x -LYNX=lynx - -############################################################################## -# -# You should not have to change anything below this comment. -# If you do, it's a deficiency in the Makefile.nmake files; -# either tell wireshark-dev@wireshark.org about it, including -# details of why you had to change it, or fix config.nmake -# and any Makefile.nmake files that need to be changed, and -# send us the patches, along with details of why the change -# was necessary. -# -############################################################################## - -# -# The RC_VERSION should be comma-separated, not dot-separated, -# as per Graham Bloice's message in -# -# http://www.wireshark.org/lists/ethereal-dev/200303/msg00283.html -# -# "The RC_VERSION variable in config.nmake should be comma separated. -# This allows the resources to be built correctly and the version -# number to be correctly displayed in the explorer properties dialog -# for the executables, and XP's tooltip, rather than 0.0.0.0." -# - -VERSION=$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_MICRO)$(VERSION_EXTRA) -RC_VERSION=$(VERSION_MAJOR),$(VERSION_MINOR),$(VERSION_MICRO),$(VERSION_BUILD) -PRODUCT_VERSION=$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_MICRO).$(VERSION_BUILD) - -WTAP_VERSION=$(WTAP_VERSION_MAJOR).$(WTAP_VERSION_MINOR).$(WTAP_VERSION_MICRO) -RC_WTAP_VERSION=$(WTAP_VERSION_MAJOR),$(WTAP_VERSION_MINOR),$(WTAP_VERSION_MICRO) -FTAP_VERSION=$(FTAP_VERSION_MAJOR).$(FTAP_VERSION_MINOR).$(FTAP_VERSION_MICRO) -RC_FTAP_VERSION=$(FTAP_VERSION_MAJOR),$(FTAP_VERSION_MINOR),$(FTAP_VERSION_MICRO) - -# GLib -GLIB_CFLAGS=/I$(GTK_DIR)\include\glib-$(GLIB_VERSION) \ - /I$(GTK_DIR)\lib\glib-$(GLIB_VERSION)\include \ - -DG_DISABLE_DEPRECATED \ - -DG_DISABLE_SINGLE_INCLUDES -GLIB_LIBS=$(GTK_DIR)\lib\glib-$(GLIB_VERSION).lib \ - $(GTK_DIR)\lib\gmodule-$(GLIB_VERSION).lib \ - $(GTK_DIR)\lib\gobject-$(GLIB_VERSION).lib - -PROGRAM_NAME_GTK=$(PROGRAM_NAME)-gtk - -# 2.18 was no good(Theming problem) -!IF "$(GTK_INST_VERSION)" == "2.24" || "$(GTK_INST_VERSION)" == "2.22" || "$(GTK_INST_VERSION)" == "2.16" || "$(GTK_INST_VERSION)" == "2.14" - -# GTK+ -GTK_CFLAGS=$(GLIB_CFLAGS) /I$(GTK_DIR)\include\gtk-2.0 \ - /I$(GTK_DIR)\include\gdk-pixbuf-2.0 \ - /I$(GTK_DIR)\lib\gtk-2.0\include \ - /I$(GTK_DIR)\include\atk-1.0 \ - /I$(GTK_DIR)\include\cairo \ - /I$(GTK_DIR)\include\pango-1.0 \ - -DGDK_DISABLE_DEPRECATED \ - -DGDK_PIXBUF_DISABLE_DEPRECATED \ - -DGTK_DISABLE_DEPRECATED \ - -DGTK_DISABLE_SINGLE_INCLUDES \ - -DGSEAL_ENABLE -GTK_LIBS=$(GTK_DIR)\lib\gtk-win32-2.0.lib \ - $(GTK_DIR)\lib\gdk-win32-2.0.lib \ - $(GTK_DIR)\lib\gdk_pixbuf-2.0.lib \ - $(GTK_DIR)\lib\cairo.lib \ - $(GTK_DIR)\lib\pango-1.0.lib \ - $(GTK_DIR)\lib\pangocairo-1.0.lib \ - $(GLIB_LIBS) - -GTK_LIB_DIR=2.10.0 - -!IFDEF HARFBUZZ_DLL -NEED_HARFBUZZ_DLL=USE -!ENDIF -!IFDEF JPEG_DLL -NEED_JPEG_DLL=USE -!ENDIF -!IFDEF PNG_DLL -NEED_PNG_DLL=USE -!ENDIF -!IFDEF SEH_DLL -NEED_SEH_DLL=USE -!ENDIF -!IFDEF SJLJ_DLL -NEED_SJLJ_DLL=USE -!ENDIF -!IFDEF TIFF_DLL -NEED_TIFF_DLL=USE -!ENDIF -NEED_CAIRO_DLL=USE -# Pango >=1.24.5 Needs these: -#NEED_EXPAT_DLL=USE -NEED_FFI_DLL=USE -NEED_FONTCONFIG_DLL=USE -NEED_FREETYPE_DLL=USE -NEED_JASPER_DLL=USE -NEED_JPEG_DLL=USE -NEED_LZMA_DLL=USE -NEED_PIXMAN_DLL=USE -NEED_XML_DLL=USE - -!ELSEIF "$(GTK_INST_VERSION)" == "3.4" || "$(GTK_INST_VERSION)" == "3.6" - -# GTK+ -## Note: If Wireshark is ever to be built with Gtk >= 3.10 -## then -DGTK_DISABLE_DEPRECATED must be removed -## and -DGDK_DISABLE_DEPRECATION_WARNINGS must -## be added below. -## Wireshark changes to handle Gtk 3.10 deprecated features -## will not be done since Wireshark is moving to Qt. -GTK_CFLAGS=$(GLIB_CFLAGS) /I$(GTK_DIR)\include\gtk-3.0 \ - /I$(GTK_DIR)\include\gdk-pixbuf-2.0 \ - /I$(GTK_DIR)\lib\gtk-3.0\include \ - /I$(GTK_DIR)\include\atk-1.0 \ - /I$(GTK_DIR)\include\cairo \ - /I$(GTK_DIR)\include\pango-1.0 \ - -DGDK_DISABLE_DEPRECATED \ - -DGDK_PIXBUF_DISABLE_DEPRECATED \ - -DGTK_DISABLE_DEPRECATED \ - -DGTK_DISABLE_SINGLE_INCLUDES \ - -DGSEAL_ENABLE -GTK_LIBS=$(GTK_DIR)\lib\gtk-3.lib \ - $(GTK_DIR)\lib\gdk-3.lib \ - $(GTK_DIR)\lib\gdk_pixbuf-2.0.lib \ - $(GTK_DIR)\lib\cairo.lib \ - $(GTK_DIR)\lib\pango-1.0.lib \ - $(GTK_DIR)\lib\pangocairo-1.0.lib \ - $(GLIB_LIBS) - -GTK_LIB_DIR=3.4 - -!IFDEF _DLL -!ENDIF - -NEED_CAIRO_GOBJECT_DLL=USE -NEED_CAIRO_DLL=USE - -!IFDEF EXPAT_DLL -NEED_EXPAT_DLL=USE -!ENDIF -!IFDEF FFI_DLL -NEED_FFI_DLL=USE -!ENDIF -!IFDEF FONTCONFIG_DLL -NEED_FONTCONFIG_DLL=USE -!ENDIF -!IFDEF FREETYPE_DLL -NEED_FREETYPE_DLL=USE -!ENDIF -!IFDEF HARFBUZZ_DLL -NEED_HARFBUZZ_DLL=USE -!ENDIF -!IFDEF JASPER_DLL -NEED_JASPER_DLL=USE -!ENDIF -!IFDEF JPEG_DLL -NEED_JPEG_DLL=USE -!ENDIF -!IFDEF LZMA_DLL -NEED_LZMA_DLL=USE -!ENDIF -!IFDEF PIXMAN_DLL -NEED_PIXMAN_DLL=USE -!ENDIF -!IFDEF PNG_DLL -NEED_PNG_DLL=USE -!ENDIF -!IFDEF SEH_DLL -NEED_SEH_DLL=USE -!ENDIF -!IFDEF SJLJ_DLL -NEED_SJLJ_DLL=USE -!ENDIF -!IFDEF TIFF_DLL -NEED_TIFF_DLL=USE -!ENDIF -!IFDEF XML_DLL -NEED_XML_DLL=USE -!ENDIF -!ELSE -!ERROR ? Unknown or invalid GTK_INST_VERSION "$(GTK_INST_VERSION)" -!ENDIF - - -!IFDEF AIRPCAP_DIR -AIRPCAP_CONFIG=^#define HAVE_AIRPCAP 1 -#AIRPCAP_CFLAGS=/I$(AIRPCAP_DIR)\include -!ELSE -AIRPCAP_CONFIG= -WIRELESS_TOOLBAR_CONFIG= -!ENDIF - -!IFDEF PCAP_DIR -# Nmake uses carets to escape special characters -WINPCAP_CONFIG=^#define HAVE_LIBPCAP 1 -# -# This requires that, if you're *building* Wireshark, you have -# the most recent WinPcap's development package. If, at *run* -# time, an older version of WinPcap, missing some routines, -# is found, we work around that. -# -PCAP_FINDALLDEVS_CONFIG=^#define HAVE_PCAP_FINDALLDEVS 1 -PCAP_DATALINK_NAME_TO_VAL_CONFIG=^#define HAVE_PCAP_DATALINK_NAME_TO_VAL 1 -PCAP_DATALINK_VAL_TO_NAME_CONFIG=^#define HAVE_PCAP_DATALINK_VAL_TO_NAME 1 -PCAP_DATALINK_VAL_TO_DESCRIPTION_CONFIG=^#define HAVE_PCAP_DATALINK_VAL_TO_DESCRIPTION 1 -# PCAP_BREAKLOOP won't have any benefit on Win32, but breaks compatibility with 3.0 -PCAP_BREAKLOOP_CONFIG= -PCAP_LIST_DATALINKS_CONFIG=^#define HAVE_PCAP_LIST_DATALINKS 1 -PCAP_FREE_DATALINKS_CONFIG=^#define HAVE_PCAP_FREE_DATALINKS 1 -PCAP_SET_DATALINK_CONFIG=^#define HAVE_PCAP_SET_DATALINK 1 -PCAP_OPEN_DEAD_CONFIG=^#define HAVE_PCAP_OPEN_DEAD 1 -BPF_IMAGE_CONFIG=^#define HAVE_BPF_IMAGE 1 -PCAP_CREATE_CONFIG=^#define HAVE_PCAP_CREATE 1 -!ELSE -# no WpdPack installed -WINPCAP_CONFIG= -PCAP_FINDALLDEVS_CONFIG= -PCAP_DATALINK_NAME_TO_VAL_CONFIG= -PCAP_DATALINK_VAL_TO_NAME_CONFIG= -PCAP_DATALINK_VAL_TO_DESCRIPTION_CONFIG= -PCAP_BREAKLOOP_CONFIG= -PCAP_LIST_DATALINKS_CONFIG= -PCAP_FREE_DATALINKS_CONFIG= -PCAP_SET_DATALINK_CONFIG= -PCAP_OPEN_DEAD_CONFIG= -BPF_IMAGE_CONFIG= -!ENDIF - -!IF DEFINED(PCAP_DIR) && DEFINED(PCAP_REMOTE) -PCAP_HAVE_REMOTE_CONFIG=^#define HAVE_REMOTE 1 -PCAP_REMOTE_CONFIG=^#define HAVE_PCAP_REMOTE 1 -PCAP_OPEN_CONFIG=^#define HAVE_PCAP_OPEN 1 -PCAP_SETSAMPLING_CONFIG=^#define HAVE_PCAP_SETSAMPLING 1 -!ELSE -PCAP_HAVE_REMOTE_CONFIG= -PCAP_REMOTE_CONFIG= -PCAP_OPEN_CONFIG= -PCAP_SETSAMPLING_CONFIG= -!ENDIF - -!IFDEF ZLIB_DIR -ZLIB_PATH=$(ZLIB_DIR) -ZLIB_CFLAGS=/I$(ZLIB_DIR) -ZLIB_LIBS=$(ZLIB_DIR)\lib\zdll.lib -ZLIB_DLL=$(ZLIB_DIR)\zlib1.dll -# Nmake uses carets to escape special characters -ZLIB_CONFIG=^#define HAVE_ZLIB 1 -!else -ZLIB_CFLAGS= -ZLIB_LIBS= -ZLIB_DLL= -ZLIB_CONFIG= -!ENDIF - -!IFDEF C_ARES_PKG -C_ARES_DIR=$(WIRESHARK_LIB_DIR)\c-ares-$(C_ARES_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws -C_ARES_CFLAGS=/I$(C_ARES_DIR)/include -C_ARES_LIBS=$(C_ARES_DIR)\lib\libcares-2.lib -C_ARES_DLL=$(C_ARES_DIR)\bin\libcares-2.dll -# Nmake uses carets to escape special characters -C_ARES_CONFIG=^#define HAVE_C_ARES 1 -!else -C_ARES_CFLAGS= -C_ARES_LIBS= -C_ARES_CONFIG= -!ENDIF # C_ARES - -!IFDEF KFW_DIR -KFW_PATH=$(KFW_DIR)\bin -KFW_CFLAGS=/I$(KFW_DIR)\include -!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win32" -KFW_LIBS=$(KFW_DIR)\lib\krb5_32.lib -!ELSE -KFW_LIBS=$(KFW_DIR)\lib\krb5_64.lib -!ENDIF -# Nmake uses carets to escape special characters -KFW_CONFIG=^#define HAVE_MIT_KERBEROS 1 -!else -KFW_CFLAGS= -KFW_LIBS= -KFW_CONFIG= -!ENDIF - -!IFDEF GNUTLS_PKG -GNUTLS_DIR=$(WIRESHARK_LIB_DIR)\gnutls-$(GNUTLS_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws -GNUTLS_PATH=$(GNUTLS_DIR) -# /DNOCRYPT avoids inclusion of Wincrypt.h, avoiding a X509_NAME define clash -GNUTLS_CFLAGS=/I$(GNUTLS_DIR)\include /DNOCRYPT /DIMPORT_LIGNUTLSDLL -GCRYPT_LIBS = $(GNUTLS_DIR)\bin\libgcrypt-20.lib -GNUTLS_LIBS=\ - $(GNUTLS_DIR)\bin\libtasn1-6.lib \ -!IF "$(WIRESHARK_TARGET_PLATFORM)" == "win32" - $(GNUTLS_DIR)\bin\libgpg-error-0.lib \ -!ELSE - $(GNUTLS_DIR)\bin\libgpg-error6-0.lib \ -!ENDIF - $(GCRYPT_LIBS) \ - $(GNUTLS_DIR)\bin\libgnutls-28.lib -# Nmake uses carets to escape special characters -GNUTLS_CONFIG=^#define HAVE_LIBGNUTLS 1 -LIBGCRYPT_CONFIG=^#define HAVE_LIBGCRYPT 1 -!else -GNUTLS_CFLAGS= -GNUTLS_LIBS= -GNUTLS_CONFIG= -LIBGCRYPT_CONFIG= -!ENDIF - -!IFDEF LIBSSH_DIR -LIBSSH_CFLAGS=/I$(LIBSSH_DIR)\include -LIBSSH_LIBS=$(LIBSSH_DIR)\lib\ssh.lib -# Nmake uses carets to escape special characters -LIBSSH_CONFIG=^#define HAVE_LIBSSH 1 -LIBSSH_VERSION=^#define HAVE_LIBSSH 1 -!else -LIBSSH_CFLAGS= -LIBSSH_LIBS= -LIBSSH_CONFIG= -!ENDIF - -!IFDEF LUA_DIR -LUA_CFLAGS=/I$(LUA_DIR)\include -LUA_LIBS=$(LUA_DIR)\lua52.lib -# Nmake uses carets to escape special characters -LUA_CONFIG=^#define HAVE_LUA 1 -LUA_VERSION=^#define HAVE_LUA 1 -!else -LUA_CFLAGS= -LUA_LIBS= -LUA_CONFIG= -!ENDIF - -!IFDEF PORTAUDIO_DIR -# Nmake uses carets to escape special characters -PORTAUDIO_CONFIG=^#define HAVE_LIBPORTAUDIO 1 -!IF "$(PORTAUDIO_VERSION)" == "18" -# V18 uses API version 1 and v19 API version 2 -PORTAUDIO_CFLAGS=/I$(PORTAUDIO_DIR)\pa_common -PORTAUDIO_API_CONFIG=^#define PORTAUDIO_API_1 1 -!ELSE -PORTAUDIO_CFLAGS=/I$(PORTAUDIO_DIR)\include /I$(PORTAUDIO_DIR)\src\common /I$(PORTAUDIO_DIR)\src\os\win /DPA_NO_DS /DPA_NO_ASIO -!ENDIF -!ELSE -PORTAUDIO_CFLAGS= -PORTAUDIO_CONFIG= -!ENDIF - -!IFDEF HHC_DIR -PATH=$(PATH);$(HHC_DIR) -HHC_EXE=hhc.exe -HHC_CFLAGS=-DHHC_DIR -HHC_LIBS=htmlhelp.lib -!ELSE -HHC_CFLAGS= -HHC_LIBS= -!ENDIF - -!IFDEF SMI_PKG -SMI_DIR=$(WIRESHARK_LIB_DIR)\libsmi-$(SMI_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws -SMI_CONFIG=^#define HAVE_LIBSMI 1 -SMI_CFLAGS=/I$(SMI_DIR)\include -SMI_LIBS=$(SMI_DIR)\lib\libsmi-2.lib -!ENDIF - -!IFDEF GEOIP_PKG -GEOIP_DIR=$(WIRESHARK_LIB_DIR)\GeoIP-$(GEOIP_PKG)-$(WIRESHARK_TARGET_PLATFORM)ws -GEOIP_CONFIG=^#define HAVE_GEOIP 1 -GEOIP_V6_CONFIG=^#define HAVE_GEOIP_V6 1 -GEOIP_CFLAGS=/I$(GEOIP_DIR)/include -GEOIP_LIBS=$(GEOIP_DIR)\lib\libGeoIP-1.lib -!ENDIF - -!IFDEF WINSPARKLE_PKG -WINSPARKLE_DIR=$(WIRESHARK_LIB_DIR)\WinSparkle-$(WINSPARKLE_PKG) -WINSPARKLE_CONFIG=^#define HAVE_SOFTWARE_UPDATE 1 -WINSPARKLE_CFLAGS=/I$(WINSPARKLE_DIR) -WINSPARKLE_LIBS=$(WINSPARKLE_DIR)\WinSparkle.lib -!ENDIF - -!IFDEF ENABLE_LIBWIRESHARK -# Link plugins with the import library of libwireshark.dll -LINK_PLUGINS_WITH_LIBWIRESHARK=USE -!ELSE -LIBWIRESHARK_CONFIG= -!ENDIF - -# Construct the path -PATH=$(PATH);$(CYGWIN_PATH);$(GTK_DIR)\bin;$(GETTEXT_DIR)\bin;$(ZLIB_PATH) - -NTDDNDIS_CONFIG=^#define HAVE_NTDDNDIS_H 1 |