Qt: Move wireshark-qt.cpp back to ui/qt/main.cpp.

The Qt UI's main module started out as ui/qt/main.cpp but was moved to
the top-level directory in order to appease Autotools. We don't need to
do that any more, so move it back.

Change-Id: Ic5bc0ed5b754e36cc2b9e682f2ca097781233dfd
Reviewed-on: https://code.wireshark.org/review/28090
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>

1 files changed, 0 insertions, 952 deletions

diff --git a/wireshark-qt.cpp b/wireshark-qt.cpp
deleted file mode 100644
index 4b595b0ebc..0000000000
--- a/wireshark-qt.cpp
+++ /dev/null
@@ -1,952 +0,0 @@
-/* wireshark-qt.cpp
- *
- * Wireshark - Network traffic analyzer
- * By Gerald Combs <gerald@wireshark.org>
- * Copyright 1998 Gerald Combs
- *
- * SPDX-License-Identifier: GPL-2.0-or-later
- */
-
-#include <config.h>
-
-#include <glib.h>
-
-#include <locale.h>
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#ifndef HAVE_GETOPT_LONG
-#include "wsutil/wsgetopt.h"
-#endif
-
-#include <wsutil/clopts_common.h>
-#include <wsutil/cmdarg_err.h>
-#include <wsutil/crash_info.h>
-#include <wsutil/filesystem.h>
-#include <wsutil/privileges.h>
-#ifdef HAVE_PLUGINS
-#include <wsutil/plugins.h>
-#endif
-#include <wsutil/report_message.h>
-#include <wsutil/unicode-utils.h>
-#include <version_info.h>
-
-#include <epan/addr_resolv.h>
-#include <epan/ex-opt.h>
-#include <epan/tap.h>
-#include <epan/stat_tap_ui.h>
-#include <epan/column.h>
-#include <epan/disabled_protos.h>
-#include <epan/prefs.h>
-
-#ifdef HAVE_KERBEROS
-#include <epan/packet.h>
-#include <epan/asn1.h>
-#include <epan/dissectors/packet-kerberos.h>
-#endif
-
-#include <codecs/codecs.h>
-
-#include <extcap.h>
-
-/* general (not Qt specific) */
-#include "file.h"
-#include "epan/color_filters.h"
-#include "log.h"
-
-#include "epan/rtd_table.h"
-#include "epan/srt_table.h"
-
-#include "ui/alert_box.h"
-#include "ui/console.h"
-#include "ui/iface_lists.h"
-#include "ui/language.h"
-#include "ui/persfilepath_opt.h"
-#include "ui/recent.h"
-#include "ui/simple_dialog.h"
-#include "ui/util.h"
-#include "ui/dissect_opts.h"
-#include "ui/commandline.h"
-#include "ui/capture_ui_utils.h"
-#include "ui/preference_utils.h"
-#include "ui/taps.h"
-
-#include "ui/qt/conversation_dialog.h"
-#include "ui/qt/utils/color_utils.h"
-#include "ui/qt/coloring_rules_dialog.h"
-#include "ui/qt/endpoint_dialog.h"
-#include "ui/qt/main_window.h"
-#include "ui/qt/response_time_delay_dialog.h"
-#include "ui/qt/service_response_time_dialog.h"
-#include "ui/qt/simple_dialog.h"
-#include "ui/qt/simple_statistics_dialog.h"
-#include "ui/qt/splash_overlay.h"
-#include "ui/qt/wireshark_application.h"
-
-#include "caputils/capture-pcap-util.h"
-
-#include <QMessageBox>
-
-#ifdef _WIN32
-#  include "caputils/capture-wpcap.h"
-#  include "caputils/capture_wpcap_packet.h"
-#  include <tchar.h> /* Needed for Unicode */
-#  include <wsutil/file_util.h>
-#  include <wsutil/os_version_info.h>
-#endif /* _WIN32 */
-
-#ifdef HAVE_AIRPCAP
-#  include <caputils/airpcap.h>
-#  include <caputils/airpcap_loader.h>
-//#  include "airpcap_dlg.h"
-//#  include "airpcap_gui_utils.h"
-#endif
-
-#include "epan/crypt/dot11decrypt_ws.h"
-
-/* Handle the addition of View menu items without request */
-#if defined(Q_OS_MAC)
-#include <ui/macosx/cocoa_bridge.h>
-#endif
-
-#include <ui/qt/utils/qt_ui_utils.h>
-
-#define INVALID_OPTION 1
-#define INIT_FAILED 2
-#define INVALID_CAPABILITY 2
-#define INVALID_LINK_TYPE 2
-
-//#define DEBUG_STARTUP_TIME 1
-/*
-# Log level
-# Console log level (for debugging)
-# A bitmask of log levels:
-# ERROR    = 4
-# CRITICAL = 8
-# WARNING  = 16
-# MESSAGE  = 32
-# INFO     = 64
-# DEBUG    = 128
-
-*/
-#define DEBUG_STARTUP_TIME_LOGLEVEL 252
-
-/* update the main window */
-void main_window_update(void)
-{
-    WiresharkApplication::processEvents();
-}
-
-#ifdef HAVE_LIBPCAP
-
-/* quit the main window */
-void main_window_quit(void)
-{
-    wsApp->quit();
-}
-
-#endif /* HAVE_LIBPCAP */
-
-void exit_application(int status) {
-    if (wsApp) {
-        wsApp->quit();
-    }
-    exit(status);
-}
-
-/*
- * Report an error in command-line arguments.
- * Creates a console on Windows.
- */
-// xxx copied from ../gtk/main.c
-static void
-wireshark_cmdarg_err(const char *fmt, va_list ap)
-{
-#ifdef _WIN32
-    create_console();
-#endif
-    fprintf(stderr, "wireshark: ");
-    vfprintf(stderr, fmt, ap);
-    fprintf(stderr, "\n");
-}
-
-/*
- * Report additional information for an error in command-line arguments.
- * Creates a console on Windows.
- * XXX - pop this up in a window of some sort on UNIX+X11 if the controlling
- * terminal isn't the standard error?
- */
-// xxx copied from ../gtk/main.c
-static void
-wireshark_cmdarg_err_cont(const char *fmt, va_list ap)
-{
-#ifdef _WIN32
-    create_console();
-#endif
-    vfprintf(stderr, fmt, ap);
-    fprintf(stderr, "\n");
-}
-
-// xxx based from ../gtk/main.c:get_gtk_compiled_info
-void
-get_wireshark_qt_compiled_info(GString *str)
-{
-    g_string_append(str, "with ");
-    g_string_append_printf(str,
-#ifdef QT_VERSION
-                    "Qt %s", QT_VERSION_STR);
-#else
-                    "Qt (version unknown)");
-#endif
-
-    /* Capture libraries */
-    g_string_append(str, ", ");
-    get_compiled_caplibs_version(str);
-}
-
-// xxx copied from ../gtk/main.c
-void
-get_gui_compiled_info(GString *str)
-{
-    epan_get_compiled_version_info(str);
-
-    g_string_append(str, ", ");
-#ifdef QT_MULTIMEDIA_LIB
-    g_string_append(str, "with QtMultimedia");
-#else
-    g_string_append(str, "without QtMultimedia");
-#endif
-
-#ifdef _WIN32
-    g_string_append(str, ", ");
-#ifdef HAVE_AIRPCAP
-    get_compiled_airpcap_version(str);
-#else
-    g_string_append(str, "without AirPcap");
-#endif
-#endif /* _WIN32 */
-
-    codec_get_compiled_version_info(str);
-}
-
-// xxx copied from ../gtk/main.c
-void
-get_wireshark_runtime_info(GString *str)
-{
-#ifdef HAVE_LIBPCAP
-    /* Capture libraries */
-    g_string_append(str, ", ");
-    get_runtime_caplibs_version(str);
-#endif
-
-    /* stuff used by libwireshark */
-    epan_get_runtime_version_info(str);
-
-#ifdef HAVE_AIRPCAP
-    g_string_append(str, ", ");
-    get_runtime_airpcap_version(str);
-#endif
-}
-
-static void
-g_log_message_handler(QtMsgType type, const QMessageLogContext &, const QString &msg)
-{
-    GLogLevelFlags log_level = G_LOG_LEVEL_DEBUG;
-
-    switch (type) {
-    case QtDebugMsg:
-    default:
-        break;
-#if (QT_VERSION >= QT_VERSION_CHECK(5, 5, 0))
-    case QtInfoMsg:
-        log_level = G_LOG_LEVEL_INFO;
-        break;
-#endif
-    case QtWarningMsg:
-        log_level = G_LOG_LEVEL_WARNING;
-        break;
-    case QtCriticalMsg:
-        log_level = G_LOG_LEVEL_CRITICAL;
-        break;
-    case QtFatalMsg:
-        log_level = G_LOG_FLAG_FATAL;
-        break;
-    }
-    g_log(LOG_DOMAIN_MAIN, log_level, "%s", qUtf8Printable(msg));
-}
-
-#ifdef HAVE_LIBPCAP
-/*  Check if there's something important to tell the user during startup.
- *  We want to do this *after* showing the main window so that any windows
- *  we pop up will be above the main window.
- */
-static void
-check_and_warn_user_startup(const QString &cf_name)
-{
-#ifndef _WIN32
-    Q_UNUSED(cf_name)
-#endif
-    gchar               *cur_user, *cur_group;
-
-    /* Tell the user not to run as root. */
-    if (running_with_special_privs() && recent.privs_warn_if_elevated) {
-        cur_user = get_cur_username();
-        cur_group = get_cur_groupname();
-        simple_message_box(ESD_TYPE_WARN, &recent.privs_warn_if_elevated,
-        "Running as user \"%s\" and group \"%s\".\n"
-        "This could be dangerous.\n\n"
-        "If you're running Wireshark this way in order to perform live capture, "
-        "you may want to be aware that there is a better way documented at\n"
-        "https://wiki.wireshark.org/CaptureSetup/CapturePrivileges", cur_user, cur_group);
-        g_free(cur_user);
-        g_free(cur_group);
-    }
-
-#ifdef _WIN32
-    /* Warn the user if npf.sys isn't loaded. */
-    if (!get_stdin_capture() && cf_name.isEmpty() && !npf_sys_is_running() && recent.privs_warn_if_no_npf && get_windows_major_version() >= 6) {
-        simple_message_box(ESD_TYPE_WARN, &recent.privs_warn_if_no_npf, "%s",
-        "The NPF driver isn't running. You may have trouble\n"
-        "capturing or listing interfaces.");
-    }
-#endif
-
-}
-#endif
-
-#ifdef _WIN32
-// Try to avoid library search path collisions. QCoreApplication will
-// search QT_INSTALL_PREFIX/plugins for platform DLLs before searching
-// the application directory. If
-//
-// - You have Qt version 5.x.y installed in the default location
-//   (C:\Qt\5.x) on your machine.
-//
-// and
-//
-// - You install Wireshark that was built on a machine with Qt version
-//   5.x.z installed in the default location.
-//
-// Qt5Core.dll will load qwindows.dll from your local C:\Qt\5.x\...\plugins
-// directory. This may not be compatible with qwindows.dll from that
-// same path on the build machine. At any rate, loading DLLs from paths
-// you don't control is ill-advised. We work around this by removing every
-// path except our application directory.
-
-static inline void
-reset_library_path(void)
-{
-    QString app_path = QDir(get_progfile_dir()).path();
-    foreach (QString path, QCoreApplication::libraryPaths()) {
-        QCoreApplication::removeLibraryPath(path);
-    }
-    QCoreApplication::addLibraryPath(app_path);
-}
-#endif
-
-/* And now our feature presentation... [ fade to music ] */
-int main(int argc, char *qt_argv[])
-{
-    MainWindow *main_w;
-
-#ifdef _WIN32
-    int                  opt;
-#endif
-    int                  ret_val = EXIT_SUCCESS;
-    char               **argv = qt_argv;
-
-#ifdef _WIN32
-    int                  result;
-    WSADATA              wsaData;
-#endif  /* _WIN32 */
-
-    char                *rf_path;
-    int                  rf_open_errno;
-#ifdef HAVE_LIBPCAP
-    gchar               *err_str;
-#else
-#ifdef _WIN32
-#ifdef HAVE_AIRPCAP
-    gchar               *err_str;
-#endif
-#endif
-#endif
-    gchar               *err_msg = NULL;
-    GString             *comp_info_str = NULL;
-    GString             *runtime_info_str = NULL;
-
-    QString              dfilter, read_filter;
-#ifdef HAVE_LIBPCAP
-    int                  caps_queries = 0;
-#endif
-    /* Start time in microseconds */
-    guint64 start_time = g_get_monotonic_time();
-#ifdef DEBUG_STARTUP_TIME
-    /* At least on Windows there is a problem with the logging as the preferences is taken
-     * into account and the preferences are loaded pretty late in the startup process.
-     */
-    prefs.console_log_level = DEBUG_STARTUP_TIME_LOGLEVEL;
-    prefs.gui_console_open = console_open_always;
-#endif /* DEBUG_STARTUP_TIME */
-    cmdarg_err_init(wireshark_cmdarg_err, wireshark_cmdarg_err_cont);
-
-#if defined(Q_OS_MAC)
-    /* Disable automatic addition of tab menu entries in view menu */
-    CocoaBridge::cleanOSGeneratedMenuItems();
-#endif
-
-    /* Set the C-language locale to the native environment. */
-    setlocale(LC_ALL, "");
-
-#ifdef _WIN32
-    // QCoreApplication clobbers argv. Let's have a local copy.
-    argv = (char **) g_malloc(sizeof(char *) * argc);
-    for (opt = 0; opt < argc; opt++) {
-        argv[opt] = qt_argv[opt];
-    }
-    arg_list_utf_16to8(argc, argv);
-    create_app_running_mutex();
-#endif /* _WIN32 */
-
-    /*
-     * Get credential information for later use, and drop privileges
-     * before doing anything else.
-     * Let the user know if anything happened.
-     */
-    init_process_policies();
-    relinquish_special_privs_perm();
-
-    /*
-     * Attempt to get the pathname of the directory containing the
-     * executable file.
-     */
-    /* init_progfile_dir_error = */ init_progfile_dir(argv[0]);
-    g_log(NULL, G_LOG_LEVEL_DEBUG, "progfile_dir: %s", get_progfile_dir());
-
-#ifdef _WIN32
-    ws_init_dll_search_path();
-    /* Load wpcap if possible. Do this before collecting the run-time version information */
-    load_wpcap();
-
-    /* ... and also load the packet.dll from wpcap */
-    wpcap_packet_load();
-
-#ifdef HAVE_AIRPCAP
-    /* Load the airpcap.dll.  This must also be done before collecting
-     * run-time version information. */
-    load_airpcap();
-#if 0
-    airpcap_dll_ret_val = load_airpcap();
-
-    switch (airpcap_dll_ret_val) {
-    case AIRPCAP_DLL_OK:
-        /* load the airpcap interfaces */
-        g_airpcap_if_list = get_airpcap_interface_list(&err, &err_str);
-
-        if (g_airpcap_if_list == NULL || g_list_length(g_airpcap_if_list) == 0){
-            if (err == CANT_GET_AIRPCAP_INTERFACE_LIST && err_str != NULL) {
-                simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s", "Failed to open Airpcap Adapters.");
-                g_free(err_str);
-            }
-            airpcap_if_active = NULL;
-
-        } else {
-
-            /* select the first ad default (THIS SHOULD BE CHANGED) */
-            airpcap_if_active = airpcap_get_default_if(airpcap_if_list);
-        }
-        break;
-    /*
-     * XXX - Maybe we need to warn the user if one of the following happens???
-     */
-    case AIRPCAP_DLL_OLD:
-        simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s","AIRPCAP_DLL_OLD\n");
-        break;
-
-    case AIRPCAP_DLL_ERROR:
-        simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s","AIRPCAP_DLL_ERROR\n");
-        break;
-
-    case AIRPCAP_DLL_NOT_FOUND:
-        simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s","AIRPCAP_DDL_NOT_FOUND\n");
-        break;
-    }
-#endif
-#endif /* HAVE_AIRPCAP */
-#endif /* _WIN32 */
-
-    /* Get the compile-time version information string */
-    comp_info_str = get_compiled_version_info(get_wireshark_qt_compiled_info,
-                                              get_gui_compiled_info);
-
-    /* Assemble the run-time version information string */
-    runtime_info_str = get_runtime_version_info(get_wireshark_runtime_info);
-
-    /* Create the user profiles directory */
-    if (create_profiles_dir(&rf_path) == -1) {
-        simple_dialog(ESD_TYPE_WARN, ESD_BTN_OK,
-                      "Could not create profiles directory\n\"%s\"",
-                      rf_path);
-        g_free (rf_path);
-    }
-
-    profile_store_persconffiles(TRUE);
-    recent_init();
-
-    /* Read the profile independent recent file.  We have to do this here so we can */
-    /* set the profile before it can be set from the command line parameter */
-    if (!recent_read_static(&rf_path, &rf_open_errno)) {
-        simple_dialog(ESD_TYPE_WARN, ESD_BTN_OK,
-                      "Could not open common recent file\n\"%s\": %s.",
-                      rf_path, strerror(rf_open_errno));
-        g_free(rf_path);
-    }
-
-    commandline_early_options(argc, argv, comp_info_str, runtime_info_str);
-
-#ifdef _WIN32
-    reset_library_path();
-#endif
-
-    // Handle DPI scaling on Windows. This causes problems in at least
-    // one case on X11 and we don't yet support Android.
-    // We do the equivalent on macOS by setting NSHighResolutionCapable
-    // in Info.plist.
-    // Note that this enables Windows 8.1-style Per-monitor DPI
-    // awareness but not Windows 10-style Per-monitor v2 awareness.
-    // http://doc.qt.io/qt-5/scalability.html
-    // http://doc.qt.io/qt-5/highdpi.html
-    // https://bugreports.qt.io/browse/QTBUG-53022 - The device pixel ratio is pretty much bogus on Windows.
-    // https://bugreports.qt.io/browse/QTBUG-55510 - Windows have wrong size
-#if defined(Q_OS_WIN) && QT_VERSION >= QT_VERSION_CHECK(5, 6, 0)
-    QApplication::setAttribute(Qt::AA_EnableHighDpiScaling);
-#endif
-
-    /* Create The Wireshark app */
-    WiresharkApplication ws_app(argc, qt_argv);
-
-    /* initialize the funnel mini-api */
-    // xxx qtshark
-    //initialize_funnel_ops();
-
-    Dot11DecryptInitContext(&dot11decrypt_ctx);
-
-    QString cf_name;
-    unsigned int in_file_type = WTAP_TYPE_AUTO;
-
-    /* Add it to the information to be reported on a crash. */
-    ws_add_crash_info("Wireshark %s\n"
-           "\n"
-           "%s"
-           "\n"
-           "%s",
-        get_ws_vcs_version_info(), comp_info_str->str, runtime_info_str->str);
-    g_string_free(comp_info_str, TRUE);
-    g_string_free(runtime_info_str, TRUE);
-
-#ifdef _WIN32
-    /* Start windows sockets */
-    result = WSAStartup( MAKEWORD( 1, 1 ), &wsaData );
-    if (result != 0)
-    {
-        ret_val = INIT_FAILED;
-        goto clean_exit;
-    }
-#endif  /* _WIN32 */
-
-    /* Read the profile dependent (static part) of the recent file. */
-    /* Only the static part of it will be read, as we don't have the gui now to fill the */
-    /* recent lists which is done in the dynamic part. */
-    /* We have to do this already here, so command line parameters can overwrite these values. */
-    if (!recent_read_profile_static(&rf_path, &rf_open_errno)) {
-        simple_dialog(ESD_TYPE_WARN, ESD_BTN_OK,
-                      "Could not open recent file\n\"%s\": %s.",
-                      rf_path, g_strerror(rf_open_errno));
-        g_free(rf_path);
-    }
-    wsApp->applyCustomColorsFromRecent();
-
-    // Initialize our language
-    read_language_prefs();
-    wsApp->loadLanguage(language);
-
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_DEBUG, "Translator %s", language);
-
-    // Init the main window (and splash)
-    main_w = new(MainWindow);
-    main_w->show();
-    // We may not need a queued connection here but it would seem to make sense
-    // to force the issue.
-    main_w->connect(&ws_app, SIGNAL(openCaptureFile(QString,QString,unsigned int)),
-            main_w, SLOT(openCaptureFile(QString,QString,unsigned int)));
-    main_w->connect(&ws_app, SIGNAL(openCaptureOptions()),
-            main_w, SLOT(on_actionCaptureOptions_triggered()));
-
-    /* Init the "Open file" dialog directory */
-    /* (do this after the path settings are processed) */
-    if (recent.gui_fileopen_remembered_dir &&
-        test_for_directory(recent.gui_fileopen_remembered_dir) == EISDIR) {
-      wsApp->setLastOpenDir(recent.gui_fileopen_remembered_dir);
-    } else {
-      wsApp->setLastOpenDir(get_persdatafile_dir());
-    }
-
-    set_console_log_handler();
-    qInstallMessageHandler(g_log_message_handler);
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "set_console_log_handler, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-
-#ifdef HAVE_LIBPCAP
-    /* Set the initial values in the capture options. This might be overwritten
-       by preference settings and then again by the command line parameters. */
-    capture_opts_init(&global_capture_opts);
-#endif
-
-    init_report_message(vfailure_alert_box, vwarning_alert_box,
-                        open_failure_alert_box, read_failure_alert_box,
-                        write_failure_alert_box);
-
-    wtap_init(TRUE);
-
-    splash_update(RA_DISSECTORS, NULL, NULL);
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Calling epan init, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-    /* Register all dissectors; we must do this before checking for the
-       "-G" flag, as the "-G" flag dumps information registered by the
-       dissectors, and we must do it before we read the preferences, in
-       case any dissectors register preferences. */
-    if (!epan_init(register_all_protocols,register_all_protocol_handoffs,
-                   splash_update, NULL)) {
-        SimpleDialog::displayQueuedMessages(main_w);
-        ret_val = INIT_FAILED;
-        goto clean_exit;
-    }
-#ifdef DEBUG_STARTUP_TIME
-    /* epan_init resets the preferences */
-    prefs.console_log_level = DEBUG_STARTUP_TIME_LOGLEVEL;
-    prefs.gui_console_open = console_open_always;
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "epan done, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-
-    /* Register all audio codecs. */
-    codecs_init();
-
-    // Read the dynamic part of the recent file. This determines whether or
-    // not the recent list appears in the main window so the earlier we can
-    // call this the better.
-    if (!recent_read_dynamic(&rf_path, &rf_open_errno)) {
-        simple_dialog(ESD_TYPE_WARN, ESD_BTN_OK,
-                      "Could not open recent file\n\"%s\": %s.",
-                      rf_path, g_strerror(rf_open_errno));
-        g_free(rf_path);
-    }
-    wsApp->refreshRecentCaptures();
-
-    splash_update(RA_LISTENERS, NULL, NULL);
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Register all tap listeners, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-    /* Register all tap listeners; we do this before we parse the arguments,
-       as the "-z" argument can specify a registered tap. */
-
-    /* we register the plugin taps before the other taps because
-            stats_tree taps plugins will be registered as tap listeners
-            by stats_tree_stat.c and need to registered before that */
-#ifdef HAVE_PLUGINS
-    register_all_plugin_tap_listeners();
-#endif
-
-    /* Register all tap listeners. */
-    for (tap_reg_t *t = tap_reg_listener; t->cb_func != NULL; t++) {
-        t->cb_func();
-    }
-    conversation_table_set_gui_info(init_conversation_table);
-    hostlist_table_set_gui_info(init_endpoint_table);
-    srt_table_iterate_tables(register_service_response_tables, NULL);
-    rtd_table_iterate_tables(register_response_time_delay_tables, NULL);
-    stat_tap_iterate_tables(register_simple_stat_tables, NULL);
-
-    if (ex_opt_count("read_format") > 0) {
-        in_file_type = open_info_name_to_type(ex_opt_get_next("read_format"));
-    }
-
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Calling extcap_register_preferences, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-    splash_update(RA_EXTCAP, NULL, NULL);
-    extcap_register_preferences();
-    splash_update(RA_PREFERENCES, NULL, NULL);
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Calling module preferences, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-
-    global_commandline_info.prefs_p = ws_app.readConfigurationFiles(false);
-
-    /* Now get our args */
-    commandline_other_options(argc, argv, TRUE);
-
-    /* Convert some command-line parameters to QStrings */
-    if (global_commandline_info.cf_name != NULL)
-        cf_name = QString(global_commandline_info.cf_name);
-    if (global_commandline_info.rfilter != NULL)
-        read_filter = QString(global_commandline_info.rfilter);
-    if (global_commandline_info.dfilter != NULL)
-        dfilter = QString(global_commandline_info.dfilter);
-
-    timestamp_set_type(recent.gui_time_format);
-    timestamp_set_precision(recent.gui_time_precision);
-    timestamp_set_seconds_type (recent.gui_seconds_format);
-
-#ifdef HAVE_LIBPCAP
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Calling fill_in_local_interfaces, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-    splash_update(RA_INTERFACES, NULL, NULL);
-
-    fill_in_local_interfaces(main_window_update);
-
-    if  (global_commandline_info.list_link_layer_types)
-        caps_queries |= CAPS_QUERY_LINK_TYPES;
-     if (global_commandline_info.list_timestamp_types)
-        caps_queries |= CAPS_QUERY_TIMESTAMP_TYPES;
-
-    if (global_commandline_info.start_capture || caps_queries) {
-        /* We're supposed to do a live capture or get a list of link-layer/timestamp
-           types for a live capture device; if the user didn't specify an
-           interface to use, pick a default. */
-        ret_val = capture_opts_default_iface_if_necessary(&global_capture_opts,
-        ((global_commandline_info.prefs_p->capture_device) && (*global_commandline_info.prefs_p->capture_device != '\0')) ? get_if_name(global_commandline_info.prefs_p->capture_device) : NULL);
-        if (ret_val != 0) {
-            goto clean_exit;
-        }
-    }
-
-    if (caps_queries) {
-        /* Get the list of link-layer types for the capture devices. */
-        if_capabilities_t *caps;
-        guint i;
-        interface_t *device;
-        for (i = 0; i < global_capture_opts.all_ifaces->len; i++) {
-            int if_caps_queries = caps_queries;
-            device = &g_array_index(global_capture_opts.all_ifaces, interface_t, i);
-            if (device->selected) {
-#if defined(HAVE_PCAP_CREATE)
-                caps = capture_get_if_capabilities(device->name, device->monitor_mode_supported, NULL, &err_str, main_window_update);
-#else
-                caps = capture_get_if_capabilities(device->name, FALSE, NULL, &err_str,main_window_update);
-#endif
-                if (caps == NULL) {
-                    cmdarg_err("%s", err_str);
-                    g_free(err_str);
-                    ret_val = INVALID_CAPABILITY;
-                    goto clean_exit;
-                }
-            if (caps->data_link_types == NULL) {
-                cmdarg_err("The capture device \"%s\" has no data link types.", device->name);
-                ret_val = INVALID_LINK_TYPE;
-                goto clean_exit;
-            }
-#ifdef _WIN32
-            create_console();
-#endif /* _WIN32 */
-#if defined(HAVE_PCAP_CREATE)
-            if (device->monitor_mode_supported)
-                if_caps_queries |= CAPS_MONITOR_MODE;
-#endif
-            capture_opts_print_if_capabilities(caps, device->name, if_caps_queries);
-#ifdef _WIN32
-            destroy_console();
-#endif /* _WIN32 */
-            free_if_capabilities(caps);
-            }
-        }
-        ret_val = EXIT_SUCCESS;
-        goto clean_exit;
-    }
-
-    capture_opts_trim_snaplen(&global_capture_opts, MIN_PACKET_SIZE);
-    capture_opts_trim_ring_num_files(&global_capture_opts);
-#endif /* HAVE_LIBPCAP */
-
-    /* Notify all registered modules that have had any of their preferences
-       changed either from one of the preferences file or from the command
-       line that their preferences have changed. */
-#ifdef DEBUG_STARTUP_TIME
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Calling prefs_apply_all, elapsed time %" G_GUINT64_FORMAT " us \n", g_get_monotonic_time() - start_time);
-#endif
-    prefs_apply_all();
-    prefs_to_capture_opts();
-    wsApp->emitAppSignal(WiresharkApplication::PreferencesChanged);
-
-#ifdef HAVE_LIBPCAP
-    if ((global_capture_opts.num_selected == 0) &&
-            (prefs.capture_device != NULL)) {
-        guint i;
-        interface_t *device;
-        for (i = 0; i < global_capture_opts.all_ifaces->len; i++) {
-            device = &g_array_index(global_capture_opts.all_ifaces, interface_t, i);
-            if (!device->hidden && strcmp(device->display_name, prefs.capture_device) == 0) {
-                device->selected = TRUE;
-                global_capture_opts.num_selected++;
-                break;
-            }
-        }
-    }
-#endif
-
-    /*
-     * Enabled and disabled protocols and heuristic dissectors as per
-     * command-line options.
-     */
-    if (!setup_enabled_and_disabled_protocols()) {
-        ret_val = INVALID_OPTION;
-        goto clean_exit;
-    }
-
-    build_column_format_array(&CaptureFile::globalCapFile()->cinfo, global_commandline_info.prefs_p->num_cols, TRUE);
-    wsApp->emitAppSignal(WiresharkApplication::ColumnsChanged); // We read "recent" widths above.
-    wsApp->emitAppSignal(WiresharkApplication::RecentPreferencesRead); // Must be emitted after PreferencesChanged.
-
-    wsApp->setMonospaceFont(prefs.gui_qt_font_name);
-
-    /* For update of WindowTitle (When use gui.window_title preference) */
-    main_w->setWSWindowTitle();
-
-    if (!color_filters_init(&err_msg, color_filter_add_cb)) {
-        simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s", err_msg);
-        g_free(err_msg);
-    }
-
-    wsApp->allSystemsGo();
-    g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_INFO, "Wireshark is up and ready to go, elapsed time %.3fs\n", (float) (g_get_monotonic_time() - start_time) / 1000000);
-    SimpleDialog::displayQueuedMessages(main_w);
-
-    /* User could specify filename, or display filter, or both */
-    if (!dfilter.isEmpty())
-        main_w->filterPackets(dfilter, false);
-    if (!cf_name.isEmpty()) {
-        if (main_w->openCaptureFile(cf_name, read_filter, in_file_type)) {
-
-            /* Open stat windows; we do so after creating the main window,
-               to avoid Qt warnings, and after successfully opening the
-               capture file, so we know we have something to compute stats
-               on, and after registering all dissectors, so that MATE will
-               have registered its field array and we can have a tap filter
-               with one of MATE's late-registered fields as part of the
-               filter. */
-            start_requested_stats();
-
-            if(global_commandline_info.go_to_packet != 0) {
-                /* Jump to the specified frame number, kept for backward
-                   compatibility. */
-                cf_goto_frame(CaptureFile::globalCapFile(), global_commandline_info.go_to_packet);
-            } else if (global_commandline_info.jfilter != NULL) {
-                dfilter_t *jump_to_filter = NULL;
-                /* try to compile given filter */
-                if (!dfilter_compile(global_commandline_info.jfilter, &jump_to_filter, &err_msg)) {
-                    // Similar code in MainWindow::mergeCaptureFile().
-                    QMessageBox::warning(main_w, QObject::tr("Invalid Display Filter"),
-                                         QObject::tr("The filter expression %1 isn't a valid display filter. (%2).")
-                                                 .arg(global_commandline_info.jfilter, err_msg),
-                                         QMessageBox::Ok);
-                    g_free(err_msg);
-                } else {
-                    /* Filter ok, jump to the first packet matching the filter
-                       conditions. Default search direction is forward, but if
-                       option d was given, search backwards */
-                    cf_find_packet_dfilter(CaptureFile::globalCapFile(), jump_to_filter, global_commandline_info.jump_backwards);
-                }
-            }
-        }
-    }
-#ifdef HAVE_LIBPCAP
-    else {
-        if (global_commandline_info.start_capture) {
-            if (global_capture_opts.save_file != NULL) {
-                /* Save the directory name for future file dialogs. */
-                /* (get_dirname overwrites filename) */
-                gchar *s = g_strdup(global_capture_opts.save_file);
-                set_last_open_dir(get_dirname(s));
-                g_free(s);
-            }
-            /* "-k" was specified; start a capture. */
-            check_and_warn_user_startup(cf_name);
-
-            /* If no user interfaces were specified on the command line,
-               copy the list of selected interfaces to the set of interfaces
-               to use for this capture. */
-            if (global_capture_opts.ifaces->len == 0)
-                collect_ifaces(&global_capture_opts);
-            CaptureFile::globalCapFile()->window = main_w;
-            if (capture_start(&global_capture_opts, main_w->captureSession(), main_w->captureInfoData(), main_window_update)) {
-                /* The capture started.  Open stat windows; we do so after creating
-                   the main window, to avoid GTK warnings, and after successfully
-                   opening the capture file, so we know we have something to compute
-                   stats on, and after registering all dissectors, so that MATE will
-                   have registered its field array and we can have a tap filter with
-                   one of MATE's late-registered fields as part of the filter. */
-                start_requested_stats();
-            }
-        }
-        /* if the user didn't supply a capture filter, use the one to filter out remote connections like SSH */
-        if (!global_commandline_info.start_capture && !global_capture_opts.default_options.cfilter) {
-            global_capture_opts.default_options.cfilter = g_strdup(get_conn_cfilter());
-        }
-    }
-#endif /* HAVE_LIBPCAP */
-
-    // UAT files used in configuration profiles which are used in Qt dialogs
-    // are not registered during startup because they only get loaded when
-    // the dialog is shown.  Register them here.
-    g_free(get_persconffile_path("io_graphs", TRUE));
-
-    profile_store_persconffiles(FALSE);
-
-    ret_val = wsApp->exec();
-    wsApp = NULL;
-
-    delete main_w;
-    recent_cleanup();
-    epan_cleanup();
-
-    extcap_cleanup();
-
-    Dot11DecryptDestroyContext(&dot11decrypt_ctx);
-
-#ifdef _WIN32
-    /* Shutdown windows sockets */
-    WSACleanup();
-
-    /* For some unknown reason, the "atexit()" call in "create_console()"
-       doesn't arrange that "destroy_console()" be called when we exit,
-       so we call it here if a console was created. */
-    destroy_console();
-#endif /* _WIN32 */
-
-clean_exit:
-#ifdef HAVE_LIBPCAP
-    capture_opts_cleanup(&global_capture_opts);
-#endif
-    col_cleanup(&CaptureFile::globalCapFile()->cinfo);
-    codecs_cleanup();
-    wtap_cleanup();
-    free_progdirs();
-    exit_application(ret_val);
-}
-
-/*
- * Editor modelines
- *
- * Local Variables:
- * c-basic-offset: 4
- * tab-width: 8
- * indent-tabs-mode: nil
- * End:
- *
- * ex: set shiftwidth=4 tabstop=8 expandtab:
- * :indentSize=4:tabSize=8:noTabs=true:
- */