Integrate libtool/libltdl with the plugin code. Add libtool and libltdl

to the distribution.

svn path=/trunk/; revision=1379

5 files changed, 783 insertions, 14 deletions

diff --git a/plugins/gryphon/Makefile.am b/plugins/gryphon/Makefile.am
index bd0ef583a1..9a20ed3c71 100644
--- a/plugins/gryphon/Makefile.am
+++ b/plugins/gryphon/Makefile.am
@@ -1,21 +1,41 @@
 # Makefile.am
-# fichier Automake pour gryphon
+# Automake file for Ethereal/Gryphon
 #
+# $Id: Makefile.am,v 1.2 1999/12/26 22:37:39 gerald Exp $
+#
+# Ethereal - Network traffic analyzer
+# By Steve Limkemann <stevelim@dgtech.com>
+# Copyright 1998 Steve Limkemann
+#
+# 
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+
+INCLUDES = -I$(top_srcdir) -I$(includedir)
 
-ETHEREAL_DIR=../..
+libdir = $(prefix)/share/@PACKAGE@/plugins/0.8
 
-bin_PROGRAMS = gryphon
+lib_LTLIBRARIES = gryphon.la
+gryphon_la_SOURCES = packet-gryphon.c packet-gryphon.h
+gryphon_la_LDFLAGS = -module -avoid-version
+
+# Libs must be cleared, or else libtool won't create a shared module.
+# If your module needs to be linked against any particular libraries,
+# add them here.
+LIBS =
 
 CLEANFILES = \
-	packet-gryphon.o
 	gryphon
 	*~
-
-gryphon_SOURCES = \
-	packet-gryphon.c	\
-	packet-gryphon.h
-
-INCLUDES = -I$(ETHEREAL_DIR)
-
-gryphon: packet-gryphon.o
-	$(LD) -shared -o $@ $<
diff --git a/plugins/gryphon/aclocal.m4 b/plugins/gryphon/aclocal.m4
new file mode 100644
index 0000000000..afb35fc222
--- /dev/null
+++ b/plugins/gryphon/aclocal.m4
@@ -0,0 +1,738 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN(AM_CONFIG_HEADER,
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated.  We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+  case " <<$>>CONFIG_HEADERS " in
+  *" <<$>>am_file "*<<)>>
+    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+    ;;
+  esac
+  am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
+# Configure paths for GLIB
+# Owen Taylor     97-11-3
+
+dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
+dnl gthread is specified in MODULES, pass to glib-config
+dnl
+AC_DEFUN(AM_PATH_GLIB,
+[dnl 
+dnl Get the cflags and libraries from the glib-config script
+dnl
+AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
+            glib_config_prefix="$withval", glib_config_prefix="")
+AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
+            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
+AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
+		    , enable_glibtest=yes)
+
+  if test x$glib_config_exec_prefix != x ; then
+     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
+     fi
+  fi
+  if test x$glib_config_prefix != x ; then
+     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
+     if test x${GLIB_CONFIG+set} != xset ; then
+        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
+     fi
+  fi
+
+  for module in . $4
+  do
+      case "$module" in
+         gmodule) 
+             glib_config_args="$glib_config_args gmodule"
+         ;;
+         gthread) 
+             glib_config_args="$glib_config_args gthread"
+         ;;
+      esac
+  done
+
+  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
+  min_glib_version=ifelse([$1], ,0.99.7,$1)
+  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
+  no_glib=""
+  if test "$GLIB_CONFIG" = "no" ; then
+    no_glib=yes
+  else
+    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
+    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
+    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_glibtest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GLIB_CFLAGS"
+      LIBS="$GLIB_LIBS $LIBS"
+dnl
+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
+dnl checks the results of glib-config to some extent
+dnl
+      rm -f conf.glibtest
+      AC_TRY_RUN([
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int 
+main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.glibtest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_glib_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_glib_version");
+     exit(1);
+   }
+
+  if ((glib_major_version != $glib_config_major_version) ||
+      (glib_minor_version != $glib_config_minor_version) ||
+      (glib_micro_version != $glib_config_micro_version))
+    {
+      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
+             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+             glib_major_version, glib_minor_version, glib_micro_version);
+      printf ("*** was found! If glib-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
+      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
+      printf("*** before re-running configure\n");
+    } 
+  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+	   (glib_minor_version != GLIB_MINOR_VERSION) ||
+           (glib_micro_version != GLIB_MICRO_VERSION))
+    {
+      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+	     glib_major_version, glib_minor_version, glib_micro_version);
+    }
+  else
+    {
+      if ((glib_major_version > major) ||
+        ((glib_major_version == major) && (glib_minor_version > minor)) ||
+        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+               glib_major_version, glib_minor_version, glib_micro_version);
+        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+	       major, minor, micro);
+        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
+        printf("*** correct copy of glib-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_glib" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$GLIB_CONFIG" = "no" ; then
+       echo "*** The glib-config script installed by GLIB could not be found"
+       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
+       echo "*** full path to glib-config."
+     else
+       if test -f conf.glibtest ; then
+        :
+       else
+          echo "*** Could not run GLIB test program, checking why..."
+          CFLAGS="$CFLAGS $GLIB_CFLAGS"
+          LIBS="$LIBS $GLIB_LIBS"
+          AC_TRY_LINK([
+#include <glib.h>
+#include <stdio.h>
+],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+          echo "***"
+          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+          echo "*** came with the system with the command"
+          echo "***"
+          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
+          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
+          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GLIB_CFLAGS=""
+     GLIB_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GLIB_CFLAGS)
+  AC_SUBST(GLIB_LIBS)
+  rm -f conf.glibtest
+])
+
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+#
+# the following will cause an existing older ltconfig to fail, so
+# we ignore this at the expense of the cache file... Checking this 
+# will just take longer ... bummer!
+#libtool_flags="--cache-file=$cache_file"
+#
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+  case "$ac_prog" in
+    # Accept absolute paths.
+changequote(,)dnl
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      ac_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  ac_cv_prog_gnu_ld=yes
+else
+  ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  ac_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$ac_dir/nm -B"
+	break
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$ac_dir/nm -p"
+	break
+      else
+	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case "$enable_ltdl_convenience" in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
+  fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
diff --git a/plugins/gryphon/configure.in b/plugins/gryphon/configure.in
index ff6ab60036..3e9f3b37b4 100644
--- a/plugins/gryphon/configure.in
+++ b/plugins/gryphon/configure.in
@@ -64,6 +64,10 @@ dnl
 AC_HEADER_STDC
 AC_CHECK_HEADERS(sys/time.h netinet/in.h)
 
+AC_LIBTOOL_DLOPEN
+AM_PROG_LIBTOOL
+AC_SUBST(LIBTOOL_DEPS)
+
 AC_CANONICAL_HOST
 
 AC_OUTPUT(Makefile)
diff --git a/plugins/gryphon/packet-gryphon.c b/plugins/gryphon/packet-gryphon.c
index 8b3e9df60f..acce080a56 100644
--- a/plugins/gryphon/packet-gryphon.c
+++ b/plugins/gryphon/packet-gryphon.c
@@ -1,7 +1,7 @@
 /* packet-gryphon.c
  * Routines for Gryphon protocol packet disassembly
  *
- * $Id: packet-gryphon.c,v 1.1 1999/12/15 06:53:30 gram Exp $
+ * $Id: packet-gryphon.c,v 1.2 1999/12/26 22:37:39 gerald Exp $
  *
  * Ethereal - Network traffic analyzer
  * By Steve Limkemann <stevelim@dgtech.com>
@@ -76,6 +76,12 @@ static gint ett_gryphon_pgm_list = -1;
 static gint ett_gryphon_pgm_status = -1;
 static gint ett_gryphon_pgm_options = -1;
 
+#define gryphon_LTX_desc          desc
+#define gryphon_LTX_dissector     dissector
+#define gryphon_LTX_filter_string filter_string
+#define gryphon_LTX_proto_init    proto_init
+#define gryphon_LTX_protocol      protocol
+#define gryphon_LTX_version       version
 
 void dissector(const u_char *pd, int offset, frame_data *fd, proto_tree *tree)
 {
diff --git a/plugins/gryphon/stamp-h.in b/plugins/gryphon/stamp-h.in
new file mode 100644
index 0000000000..9788f70238
--- /dev/null
+++ b/plugins/gryphon/stamp-h.in
@@ -0,0 +1 @@
+timestamp