1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
#ifndef _BOARD_
#define _BOARD_
/** Headers */
#include "chip.h"
/* We need this for a nop instruction in USB_HAL.c */
#define __CC_ARM
/** Board */
#include "board_lowlevel.h"
#include "uart_console.h"
#include "iso7816_4.h"
#include "led.h"
#include "cciddriver.h"
#include "usart.h"
#include "USBD.h"
#include "USBD_Config.h"
#include "USBDDriver.h"
/** Highlevel */
#include "trace.h"
#include "stdio.h"
#include "stdlib.h"
#include "string.h"
#include "inttypes.h"
#include "syscalls.h"
#define MIN(a, b) ((a < b) ? a : b)
#ifdef __GNUC__
#undef __GNUC__
#endif
/** Family definition (already defined) */
#define sam3s
/** Core definition */
#define cortexm3
#define BOARD_MCK 48000000
#define PIO_LED_RED PIO_PA17
#define PIO_LED_GREEN PIO_PA18
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
#define LED_NUM_RED 0
#define LED_NUM_GREEN 1
/** USART0 pin RX */
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** USART0 pin TX */
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
#define BOARD_ID_USART ID_USART0
#define BOARD_USART_BASE USART0
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/** UART0 */
/** Console baudrate always using 115200. */
#define CONSOLE_BAUDRATE 115200
/** UART peripheral used by the console (UART0). */
#define CONSOLE_UART UART0
/** UART peripheral ID used by the console (UART0). */
#define CONSOLE_ID ID_UART0
/** UART ISR used by the console (UART0). */
#define CONSOLE_ISR UART0_IrqHandler
/** UART IRQ used by the console (UART0). */
#define CONSOLE_IRQ UART0_IRQn
/** Pins description corresponding to Rxd,Txd, (UART pins) */
#define CONSOLE_PINS {PINS_UART}
/// Smartcard detection pin
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
#define BOARD_ISO7816_BASE_USART USART0
#define BOARD_ISO7816_ID_USART ID_USART0
/* USART peripherals for a phone and SIM card setup */
/* USART peripheral connected to the SIM card */
#define USART_SIM USART0
/* ID of USART peripheral connected to the SIM card */
#define ID_USART_SIM ID_USART0
/* Interrupt request ID of USART peripheral connected to the SIM card */
#define IRQ_USART_SIM USART0_IRQn
/* USART peripheral connected to the phone */
#define USART_PHONE USART1
/* ID of USART peripheral connected to the phone */
#define ID_USART_PHONE ID_USART1
/* Interrupt request ID of USART peripheral connected to the phone */
#define IRQ_USART_PHONE USART1_IRQn
#define SIM_PWEN PIO_PA5
#define VCC_FWD PIO_PA26
/** Pin configuration to control USB pull-up on D+
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
*/
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
// Board has UDP controller
#define BOARD_USB_UDP
// D+ has external pull-up
#define BOARD_USB_PULLUP_EXTERNAL
#define BOARD_USB_NUMENDPOINTS 8
// FIXME: in all other cases return 0?
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
#define USB_VENDOR_OPENMOKO 0x1d50
#define USB_PRODUCT_OWHW_SAM3_DFU 0x4001 /* was 0x4000 */
#define USB_PRODUCT_OWHW_SAM3 0x4001
#define USB_PRODUCT_QMOD_HUB 0x4002
#define USB_PRODUCT_QMOD_SAM3_DFU 0x4004 /* was 0x4003 */
#define USB_PRODUCT_QMOD_SAM3 0x4004
#define USB_PRODUCT_SIMTRACE2_DFU 0x60e3 /* was 0x60e2 */
#define USB_PRODUCT_SIMTRACE2 0x60e3
#define BOARD_USB_DFU
#define BOARD_DFU_BOOT_SIZE (16 * 1024)
#define BOARD_DFU_RAM_SIZE (2 * 1024)
#define BOARD_DFU_PAGE_SIZE 512
#define BOARD_DFU_NUM_IF 2
extern void board_exec_dbg_cmd(int ch);
extern void board_main_top(void);
extern int board_override_enter_dfu(void);
#endif
|