1 files changed, 0 insertions, 70 deletions
diff --git a/firmware/libcommon/include/iso7816_3.h b/firmware/libcommon/include/iso7816_3.h
deleted file mode 100644
index e6c1b4f..0000000
--- a/firmware/libcommon/include/iso7816_3.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2019 sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-*/
-
-/* this library provides utilities to handle the ISO-7816 part 3 communication aspects (e.g. related
- * to F and D) */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-/*! default clock rate conversion integer Fd.
- *  ISO/IEC 7816-3:2006(E) section 8.1 */
-#define ISO7816_3_DEFAULT_FD 372
-
-/*! default baud rate adjustment factor Dd.
- *  ISO/IEC 7816-3:2006(E) section 8.1 */
-#define ISO7816_3_DEFAULT_DD 1
-
-/*! default clock rate conversion integer Fi.
- *  ISO/IEC 7816-3:2006(E) section 8.3
- *  \note non-default value is optionally specified in TA1 */
-#define ISO7816_3_DEFAULT_FI 372
-
-/*! default baud rate adjustment factor Di.
- *  ISO/IEC 7816-3:2006(E) section 8.3
- *  \note non-default value is optionally specified in TA1 */
-#define ISO7816_3_DEFAULT_DI 1
-
-/*! default maximum clock frequency, in Hz.
- *  ISO/IEC 7816-3:2006(E) section 8.3
- *  \note non-default value is optionally specified in TA1 */
-#define ISO7816_3_DEFAULT_FMAX 5000000UL
-
-/*! default Waiting Integer (WI) value for T=0.
- *  ISO/IEC 7816-3:2006(E) section 10.2
- *  \note non-default value is optionally specified in TC2 */
-#define ISO7816_3_DEFAULT_WI 10
-
-/*! default Waiting Time (WT) value, in ETU.
- *  ISO/IEC 7816-3:2006(E) section 8.1
- *  \note depends on Fi, Di, and WI if protocol T=0 is selected */
-#define ISO7816_3_DEFAULT_WT 9600
-
-extern const uint16_t iso7816_3_fi_table[];
-
-extern const uint32_t iso7816_3_fmax_table[];
-
-extern const uint8_t iso7816_3_di_table[];
-
-bool iso7816_3_valid_f(uint16_t f);
-
-bool iso7816_3_valid_d(uint8_t d);
-
-int32_t iso7816_3_calculate_wt(uint8_t wi, uint16_t fi, uint8_t di, uint16_t f, uint8_t d);