diff options
author | Harald Welte <laforge@osmocom.org> | 2020-01-09 20:31:06 +0100 |
---|---|---|
committer | Harald Welte <laforge@osmocom.org> | 2021-06-06 11:46:50 +0200 |
commit | eb8fbc0296de753c6eb61b8bafcb26dd90458483 (patch) | |
tree | 4c2508848ae2c1fb40dfa921d9f2f4fcd713cb73 | |
parent | 9292d22726387dba024c2b0c9d76498546f291a1 (diff) |
fw/qmod: enable modem RESET by default at bootlaforge/tool
When the uC firmware starts, assert the (high-active) _RESET GPIOs,
which will cause the transistors to drive the mPCIe slot !PERST
low.
There is of course a short instance of time between the uC reset
until it executes wwan_perst_init(). To avoid this, a hardware
pull-up would have to be re-worked onto the _RESET[1..4] signals
on the PCBA
Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb
-rw-r--r-- | firmware/libboard/qmod/include/board.h | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/firmware/libboard/qmod/include/board.h b/firmware/libboard/qmod/include/board.h index 0d35bef..b5047d6 100644 --- a/firmware/libboard/qmod/include/board.h +++ b/firmware/libboard/qmod/include/board.h @@ -91,8 +91,8 @@ #define PINS_WWAN_IN { PIN_WWAN1, PIN_WWAN2 } /* outputs controlling RESET input of modems */ -#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} -#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} +#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_PULLUP} +#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_PULLUP} #define PINS_PERST { PIN_PERST1, PIN_PERST2 } #define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT} |